Export limit exceeded: 349252 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 349252 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (349252 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43450 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table() nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label inside the for loop body. When the "last" helper saved in cb->args[1] is deleted between dump rounds, every entry fails the (cur != last) check, so cb->args[1] is never cleared. The for loop finishes with cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back into the loop body bypassing the bounds check, causing an 8-byte out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize]. The 'goto restart' block was meant to re-traverse the current bucket when "last" is no longer found, but it was placed after the for loop instead of inside it. Move the block into the for loop body so that the restart only occurs while cb->args[0] is still within bounds. BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0 Read of size 8 at addr ffff888104ca3000 by task poc_cthelper/131 Call Trace: nfnl_cthelper_dump_table+0x9f/0x1b0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 sock_recvmsg+0xde/0xf0 __sys_recvfrom+0x150/0x200 __x64_sys_recvfrom+0x76/0x90 do_syscall_64+0xc3/0x6e0 Allocated by task 1: __kvmalloc_node_noprof+0x21b/0x700 nf_ct_alloc_hashtable+0x65/0xd0 nf_conntrack_helper_init+0x21/0x60 nf_conntrack_init_start+0x18d/0x300 nf_conntrack_standalone_init+0x12/0xc0 | ||||
| CVE-2026-43449 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set dev->online_queues is a count incremented in nvme_init_queue. Thus, valid indices are 0 through dev->online_queues − 1. This patch fixes the loop condition to ensure the index stays within the valid range. Index 0 is excluded because it is the admin queue. KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 Read of size 2 at addr ffff88800592a574 by task kworker/u8:5/74 CPU: 0 UID: 0 PID: 74 Comm: kworker/u8:5 Not tainted 6.19.0-dirty #10 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: nvme-reset-wq nvme_reset_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xea/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x5d0 mm/kasan/report.c:482 kasan_report+0xdc/0x110 mm/kasan/report.c:595 __asan_report_load2_noabort+0x18/0x20 mm/kasan/report_generic.c:379 nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 nvme_reset_work+0x36b/0x8c0 drivers/nvme/host/pci.c:3252 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> Allocated by task 34 on cpu 1 at 4.241550s: kasan_save_stack+0x2c/0x60 mm/kasan/common.c:57 kasan_save_track+0x1c/0x70 mm/kasan/common.c:78 kasan_save_alloc_info+0x3c/0x50 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xb5/0xc0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5657 [inline] __kmalloc_node_noprof+0x2bf/0x8d0 mm/slub.c:5663 kmalloc_array_node_noprof include/linux/slab.h:1075 [inline] nvme_pci_alloc_dev drivers/nvme/host/pci.c:3479 [inline] nvme_probe+0x2f1/0x1820 drivers/nvme/host/pci.c:3534 local_pci_probe+0xef/0x1c0 drivers/pci/pci-driver.c:324 pci_call_probe drivers/pci/pci-driver.c:392 [inline] __pci_device_probe drivers/pci/pci-driver.c:417 [inline] pci_device_probe+0x743/0x920 drivers/pci/pci-driver.c:451 call_driver_probe drivers/base/dd.c:583 [inline] really_probe+0x29b/0xb70 drivers/base/dd.c:661 __driver_probe_device+0x3b0/0x4a0 drivers/base/dd.c:803 driver_probe_device+0x56/0x1f0 drivers/base/dd.c:833 __driver_attach_async_helper+0x155/0x340 drivers/base/dd.c:1159 async_run_entry_fn+0xa6/0x4b0 kernel/async.c:129 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 The buggy address belongs to the object at ffff88800592a000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 244 bytes to the right of allocated 1152-byte region [ffff88800592a000, ffff88800592a480) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5928 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0xfffffc0000040(head|node=0|zone=1|lastcpupid=0x1fffff) page_type: f5(slab) raw: 000fffffc0000040 ffff888001042000 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 000fffffc0000040 ffff888001042000 00000 ---truncated--- | ||||
| CVE-2026-43448 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix race bug in nvme_poll_irqdisable() In the following scenario, pdev can be disabled between (1) and (3) by (2). This sets pdev->msix_enabled = 0. Then, pci_irq_vector() will return MSI-X IRQ(>15) for (1) whereas return INTx IRQ(<=15) for (2). This causes IRQ warning because it tries to enable INTx IRQ that has never been disabled before. To fix this, save IRQ number into a local variable and ensure disable_irq() and enable_irq() operate on the same IRQ number. Even if pci_free_irq_vectors() frees the IRQ concurrently, disable_irq() and enable_irq() on a stale IRQ number is still valid and safe, and the depth accounting reamins balanced. task 1: nvme_poll_irqdisable() disable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(1) enable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(3) task 2: nvme_reset_work() nvme_dev_disable() pdev->msix_enable = 0; ...(2) crash log: ------------[ cut here ]------------ Unbalanced enable for IRQ 10 WARNING: kernel/irq/manage.c:753 at __enable_irq+0x102/0x190 kernel/irq/manage.c:753, CPU#1: kworker/1:0H/26 Modules linked in: CPU: 1 UID: 0 PID: 26 Comm: kworker/1:0H Not tainted 6.19.0-dirty #9 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_timeout_work RIP: 0010:__enable_irq+0x107/0x190 kernel/irq/manage.c:753 Code: ff df 48 89 fa 48 c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 79 48 8d 3d 2e 7a 3f 05 41 8b 74 24 2c <67> 48 0f b9 3a e8 ef b9 21 00 5b 41 5c 5d e9 46 54 66 03 e8 e1 b9 RSP: 0018:ffffc900001bf550 EFLAGS: 00010046 RAX: 0000000000000007 RBX: 0000000000000000 RCX: ffffffffb20c0e90 RDX: 0000000000000000 RSI: 000000000000000a RDI: ffffffffb74b88f0 RBP: ffffc900001bf560 R08: ffff88800197cf00 R09: 0000000000000001 R10: 0000000000000003 R11: 0000000000000003 R12: ffff8880012a6000 R13: 1ffff92000037eae R14: 000000000000000a R15: 0000000000000293 FS: 0000000000000000(0000) GS:ffff8880b49f7000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555da4a25fa8 CR3: 00000000208e8000 CR4: 00000000000006f0 Call Trace: <TASK> enable_irq+0x121/0x1e0 kernel/irq/manage.c:797 nvme_poll_irqdisable+0x162/0x1c0 drivers/nvme/host/pci.c:1494 nvme_timeout+0x965/0x14b0 drivers/nvme/host/pci.c:1744 blk_mq_rq_timed_out block/blk-mq.c:1653 [inline] blk_mq_handle_expired+0x227/0x2d0 block/blk-mq.c:1721 bt_iter+0x2fc/0x3a0 block/blk-mq-tag.c:292 __sbitmap_for_each_set include/linux/sbitmap.h:269 [inline] sbitmap_for_each_set include/linux/sbitmap.h:290 [inline] bt_for_each block/blk-mq-tag.c:324 [inline] blk_mq_queue_tag_busy_iter+0x969/0x1e80 block/blk-mq-tag.c:536 blk_mq_timeout_work+0x627/0x870 block/blk-mq.c:1763 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> irq event stamp: 74478 hardirqs last enabled at (74477): [<ffffffffb5720a9c>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:159 [inline] hardirqs last enabled at (74477): [<ffffffffb5720a9c>] _raw_spin_unlock_irq+0x2c/0x60 kernel/locking/spinlock.c:202 hardirqs last disabled at (74478): [<ffffffffb57207b5>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (74478): [<ffffffffb57207b5>] _raw_spin_lock_irqsave+0x85/0xa0 kernel/locking/spinlock.c:162 softirqs last enabled at (74304): [<ffffffffb1e9466c>] __do_softirq kernel/softirq.c:656 [inline] softirqs last enabled at (74304): [<ffffffffb1e9466c>] invoke_softirq kernel/softirq.c:496 [inline] softirqs last enabled at (74304): [<ffffffffb1e9466c>] __irq_exit_rcu+0xdc/0x120 ---truncated--- | ||||
| CVE-2026-43447 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iavf: fix PTP use-after-free during reset Commit 7c01dbfc8a1c5f ("iavf: periodically cache PHC time") introduced a worker to cache PHC time, but failed to stop it during reset or disable. This creates a race condition where `iavf_reset_task()` or `iavf_disable_vf()` free adapter resources (AQ) while the worker is still running. If the worker triggers `iavf_queue_ptp_cmd()` during teardown, it accesses freed memory/locks, leading to a crash. Fix this by calling `iavf_ptp_release()` before tearing down the adapter. This ensures `ptp_clock_unregister()` synchronously cancels the worker and cleans up the chardev before the backing resources are destroyed. | ||||
| CVE-2026-43446 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix runtime suspend deadlock when there is pending job The runtime suspend callback drains the running job workqueue before suspending the device. If a job is still executing and calls pm_runtime_resume_and_get(), it can deadlock with the runtime suspend path. Fix this by moving pm_runtime_resume_and_get() from the job execution routine to the job submission routine, ensuring the device is resumed before the job is queued and avoiding the deadlock during runtime suspend. | ||||
| CVE-2026-43445 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: e1000/e1000e: Fix leak in DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented after a successful mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping would leak. In these commits, a faulty while condition caused an infinite loop in dma_error: Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e driver") Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver") Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()") fixed the infinite loop, but introduced the off-by-one error. This issue may still exist in the igbvf driver, but I did not address it in this patch. | ||||
| CVE-2026-43444 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Unreserve bo if queue update failed Error handling path should unreserve bo then return failed. (cherry picked from commit c24afed7de9ecce341825d8ab55a43a254348b33) | ||||
| CVE-2026-43443 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-mach-common: Add missing error check for clock acquisition The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not check the return values of clk_get(). This could lead to a kernel crash when the invalid pointers are later dereferenced by clock core functions. Fix this by: 1. Changing clk_get() to the device-managed devm_clk_get(). 2. Adding IS_ERR() checks immediately after each clock acquisition. | ||||
| CVE-2026-43442 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix physical SQE bounds check for SQE_MIXED 128-byte ops When IORING_SETUP_SQE_MIXED is used without IORING_SETUP_NO_SQARRAY, the boundary check for 128-byte SQE operations in io_init_req() validated the logical SQ head position rather than the physical SQE index. The existing check: !(ctx->cached_sq_head & (ctx->sq_entries - 1)) ensures the logical position isn't at the end of the ring, which is correct for NO_SQARRAY rings where physical == logical. However, when sq_array is present, an unprivileged user can remap any logical position to an arbitrary physical index via sq_array. Setting sq_array[N] = sq_entries - 1 places a 128-byte operation at the last physical SQE slot, causing the 128-byte memcpy in io_uring_cmd_sqe_copy() to read 64 bytes past the end of the SQE array. Replace the cached_sq_head alignment check with a direct validation of the physical SQE index, which correctly handles both sq_array and NO_SQARRAY cases. | ||||
| CVE-2026-43441 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. If bonding ARP/NS validation is enabled, an IPv6 NS/NA packet received on a slave can reach bond_validate_na(), which calls bond_has_this_ip6(). That path calls ipv6_chk_addr() and can crash in __ipv6_chk_addr_and_flags(). BUG: kernel NULL pointer dereference, address: 00000000000005d8 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:__ipv6_chk_addr_and_flags+0x69/0x170 Call Trace: <IRQ> ipv6_chk_addr+0x1f/0x30 bond_validate_na+0x12e/0x1d0 [bonding] ? __pfx_bond_handle_frame+0x10/0x10 [bonding] bond_rcv_validate+0x1a0/0x450 [bonding] bond_handle_frame+0x5e/0x290 [bonding] ? srso_alias_return_thunk+0x5/0xfbef5 __netif_receive_skb_core.constprop.0+0x3e8/0xe50 ? srso_alias_return_thunk+0x5/0xfbef5 ? update_cfs_rq_load_avg+0x1a/0x240 ? srso_alias_return_thunk+0x5/0xfbef5 ? __enqueue_entity+0x5e/0x240 __netif_receive_skb_one_core+0x39/0xa0 process_backlog+0x9c/0x150 __napi_poll+0x30/0x200 ? srso_alias_return_thunk+0x5/0xfbef5 net_rx_action+0x338/0x3b0 handle_softirqs+0xc9/0x2a0 do_softirq+0x42/0x60 </IRQ> <TASK> __local_bh_enable_ip+0x62/0x70 __dev_queue_xmit+0x2d3/0x1000 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? packet_parse_headers+0x10a/0x1a0 packet_sendmsg+0x10da/0x1700 ? kick_pool+0x5f/0x140 ? srso_alias_return_thunk+0x5/0xfbef5 ? __queue_work+0x12d/0x4f0 __sys_sendto+0x1f3/0x220 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x101/0xf80 ? exc_page_fault+0x6e/0x170 ? srso_alias_return_thunk+0x5/0xfbef5 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix this by checking ipv6_mod_enabled() before dispatching IPv6 packets to bond_na_rcv(). If IPv6 is disabled, return early from bond_rcv_validate() and avoid the path to ipv6_chk_addr(). | ||||
| CVE-2026-43440 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mana: Null service_wq on setup error to prevent double destroy In mana_gd_setup() error path, set gc->service_wq to NULL after destroy_workqueue() to match the cleanup in mana_gd_cleanup(). This prevents a use-after-free if the workqueue pointer is checked after a failed setup. | ||||
| CVE-2026-43439 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cgroup: fix race between task migration and iteration When a task is migrated out of a css_set, cgroup_migrate_add_task() first moves it from cset->tasks to cset->mg_tasks via: list_move_tail(&task->cg_list, &cset->mg_tasks); If a css_task_iter currently has it->task_pos pointing to this task, css_set_move_task() calls css_task_iter_skip() to keep the iterator valid. However, since the task has already been moved to ->mg_tasks, the iterator is advanced relative to the mg_tasks list instead of the original tasks list. As a result, remaining tasks on cset->tasks, as well as tasks queued on cset->mg_tasks, can be skipped by iteration. Fix this by calling css_set_skip_task_iters() before unlinking task->cg_list from cset->tasks. This advances all active iterators to the next task on cset->tasks, so iteration continues correctly even when a task is concurrently being migrated. This race is hard to hit in practice without instrumentation, but it can be reproduced by artificially slowing down cgroup_procs_show(). For example, on an Android device a temporary /sys/kernel/cgroup/cgroup_test knob can be added to inject a delay into cgroup_procs_show(), and then: 1) Spawn three long-running tasks (PIDs 101, 102, 103). 2) Create a test cgroup and move the tasks into it. 3) Enable a large delay via /sys/kernel/cgroup/cgroup_test. 4) In one shell, read cgroup.procs from the test cgroup. 5) Within the delay window, in another shell migrate PID 102 by writing it to a different cgroup.procs file. Under this setup, cgroup.procs can intermittently show only PID 101 while skipping PID 103. Once the migration completes, reading the file again shows all tasks as expected. Note that this change does not allow removing the existing css_set_skip_task_iters() call in css_set_move_task(). The new call in cgroup_migrate_add_task() only handles iterators that are racing with migration while the task is still on cset->tasks. Iterators may also start after the task has been moved to cset->mg_tasks. If we dropped css_set_skip_task_iters() from css_set_move_task(), such iterators could keep task_pos pointing to a migrating task, causing css_task_iter_advance() to malfunction on the destination css_set, up to and including crashes or infinite loops. The race window between migration and iteration is very small, and css_task_iter is not on a hot path. In the worst case, when an iterator is positioned on the first thread of the migrating process, cgroup_migrate_add_task() may have to skip multiple tasks via css_set_skip_task_iters(). However, this only happens when migration and iteration actually race, so the performance impact is negligible compared to the correctness fix provided here. | ||||
| CVE-2026-43438 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Remove redundant css_put() in scx_cgroup_init() The iterator css_for_each_descendant_pre() walks the cgroup hierarchy under cgroup_lock(). It does not increment the reference counts on yielded css structs. According to the cgroup documentation, css_put() should only be used to release a reference obtained via css_get() or css_tryget_online(). Since the iterator does not use either of these to acquire a reference, calling css_put() in the error path of scx_cgroup_init() causes a refcount underflow. Remove the unbalanced css_put() to prevent a potential Use-After-Free (UAF) vulnerability. | ||||
| CVE-2026-43437 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain() In the drain loop, the local variable 'runtime' is reassigned to a linked stream's runtime (runtime = s->runtime at line 2157). After releasing the stream lock at line 2169, the code accesses runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size (lines 2170-2178) — all referencing the linked stream's runtime without any lock or refcount protecting its lifetime. A concurrent close() on the linked stream's fd triggers snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private() → snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime). No synchronization prevents kfree(runtime) from completing while the drain path dereferences the stale pointer. Fix by caching the needed runtime fields (no_period_wakeup, rate, buffer_size) into local variables while still holding the stream lock, and using the cached values after the lock is released. | ||||
| CVE-2026-43436 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces The Scarlett2 mixer quirk in USB-audio driver may hit a NULL dereference when a malformed USB descriptor is passed, since it assumes the presence of an endpoint in the parsed interface in scarlett2_find_fc_interface(), as reported by fuzzer. For avoiding the NULL dereference, just add the sanity check of bNumEndpoints and skip the invalid interface. | ||||
| CVE-2026-43435 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rust_binder: fix oneway spam detection The spam detection logic in TreeRange was executed before the current request was inserted into the tree. So the new request was not being factored in the spam calculation. Fix this by moving the logic after the new range has been inserted. Also, the detection logic for ArrayRange was missing altogether which meant large spamming transactions could get away without being detected. Fix this by implementing an equivalent low_oneway_space() in ArrayRange. Note that I looked into centralizing this logic in RangeAllocator but iterating through 'state' and 'size' got a bit too complicated (for me) and I abandoned this effort. | ||||
| CVE-2026-43434 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rust_binder: check ownership before using vma When installing missing pages (or zapping them), Rust Binder will look up the vma in the mm by address, and then call vm_insert_page (or zap_page_range_single). However, if the vma is closed and replaced with a different vma at the same address, this can lead to Rust Binder installing pages into the wrong vma. By installing the page into a writable vma, it becomes possible to write to your own binder pages, which are normally read-only. Although you're not supposed to be able to write to those pages, the intent behind the design of Rust Binder is that even if you get that ability, it should not lead to anything bad. Unfortunately, due to another bug, that is not the case. To fix this, store a pointer in vm_private_data and check that the vma returned by vma_lookup() has the right vm_ops and vm_private_data before trying to use the vma. This should ensure that Rust Binder will refuse to interact with any other VMA. The plan is to introduce more vma abstractions to avoid this unsafe access to vm_ops and vm_private_data, but for now let's start with the simplest possible fix. C Binder performs the same check in a slightly different way: it provides a vm_ops->close that sets a boolean to true, then checks that boolean after calling vma_lookup(), but this is more fragile than the solution in this patch. (We probably still want to do both, but the vm_ops->close callback will be added later as part of the follow-up vma API changes.) It's still possible to remap the vma so that pages appear in the right vma, but at the wrong offset, but this is a separate issue and will be fixed when Rust Binder gets a vm_ops->close callback. | ||||
| CVE-2026-43433 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rust_binder: avoid reading the written value in offsets array When sending a transaction, its offsets array is first copied into the target proc's vma, and then the values are read back from there. This is normally fine because the vma is a read-only mapping, so the target process cannot change the value under us. However, if the target process somehow gains the ability to write to its own vma, it could change the offset before it's read back, causing the kernel to misinterpret what the sender meant. If the sender happens to send a payload with a specific shape, this could in the worst case lead to the receiver being able to privilege escalate into the sender. The intent is that gaining the ability to change the read-only vma of your own process should not be exploitable, so remove this TOCTOU read even though it's unexploitable without another Binder bug. | ||||
| CVE-2026-43432 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix memory leak in xhci_disable_slot() xhci_alloc_command() allocates a command structure and, when the second argument is true, also allocates a completion structure. Currently, the error handling path in xhci_disable_slot() only frees the command structure using kfree(), causing the completion structure to leak. Use xhci_free_command() instead of kfree(). xhci_free_command() correctly frees both the command structure and the associated completion structure. Since the command structure is allocated with zero-initialization, command->in_ctx is NULL and will not be erroneously freed by xhci_free_command(). This bug was found using an experimental static analysis tool we are developing. The tool is based on the LLVM framework and is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available, but we plan to open-source it after our research is published. The bug was originally detected on v6.13-rc1 using our static analysis tool, and we have verified that the issue persists in the latest mainline kernel. We performed build testing on x86_64 with allyesconfig using GCC=11.4.0. Since triggering these error paths in xhci_disable_slot() requires specific hardware conditions or abnormal state, we were unable to construct a test case to reliably trigger these specific error paths at runtime. | ||||
| CVE-2026-43431 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xhci: Fix NULL pointer dereference when reading portli debugfs files Michal reported and debgged a NULL pointer dereference bug in the recently added portli debugfs files Oops is caused when there are more port registers counted in xhci->max_ports than ports reported by Supported Protocol capabilities. This is possible if max_ports is more than maximum port number, or if there are gaps between ports of different speeds the 'Supported Protocol' capabilities. In such cases port->rhub will be NULL so we can't reach xhci behind it. Add an explicit NULL check for this case, and print portli in hex without dereferencing port->rhub. | ||||