In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here.
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | |||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
|||||||||||||||||||||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
No data.
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Fri, 08 May 2026 14:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: cgroup: fix race between task migration and iteration When a task is migrated out of a css_set, cgroup_migrate_add_task() first moves it from cset->tasks to cset->mg_tasks via: list_move_tail(&task->cg_list, &cset->mg_tasks); If a css_task_iter currently has it->task_pos pointing to this task, css_set_move_task() calls css_task_iter_skip() to keep the iterator valid. However, since the task has already been moved to ->mg_tasks, the iterator is advanced relative to the mg_tasks list instead of the original tasks list. As a result, remaining tasks on cset->tasks, as well as tasks queued on cset->mg_tasks, can be skipped by iteration. Fix this by calling css_set_skip_task_iters() before unlinking task->cg_list from cset->tasks. This advances all active iterators to the next task on cset->tasks, so iteration continues correctly even when a task is concurrently being migrated. This race is hard to hit in practice without instrumentation, but it can be reproduced by artificially slowing down cgroup_procs_show(). For example, on an Android device a temporary /sys/kernel/cgroup/cgroup_test knob can be added to inject a delay into cgroup_procs_show(), and then: 1) Spawn three long-running tasks (PIDs 101, 102, 103). 2) Create a test cgroup and move the tasks into it. 3) Enable a large delay via /sys/kernel/cgroup/cgroup_test. 4) In one shell, read cgroup.procs from the test cgroup. 5) Within the delay window, in another shell migrate PID 102 by writing it to a different cgroup.procs file. Under this setup, cgroup.procs can intermittently show only PID 101 while skipping PID 103. Once the migration completes, reading the file again shows all tasks as expected. Note that this change does not allow removing the existing css_set_skip_task_iters() call in css_set_move_task(). The new call in cgroup_migrate_add_task() only handles iterators that are racing with migration while the task is still on cset->tasks. Iterators may also start after the task has been moved to cset->mg_tasks. If we dropped css_set_skip_task_iters() from css_set_move_task(), such iterators could keep task_pos pointing to a migrating task, causing css_task_iter_advance() to malfunction on the destination css_set, up to and including crashes or infinite loops. The race window between migration and iteration is very small, and css_task_iter is not on a hot path. In the worst case, when an iterator is positioned on the first thread of the migrating process, cgroup_migrate_add_task() may have to skip multiple tasks via css_set_skip_task_iters(). However, this only happens when migration and iteration actually race, so the performance impact is negligible compared to the correctness fix provided here. | |
| Title | cgroup: fix race between task migration and iteration | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
|
Projects
Sign in to view the affected projects.
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-05-08T14:22:08.626Z
Reserved: 2026-05-01T14:12:56.009Z
Link: CVE-2026-43439
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-05-08T15:16:56.263
Modified: 2026-05-08T15:16:56.263
Link: CVE-2026-43439
Redhat
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.