Export limit exceeded: 360660 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 360660 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (360660 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-11881 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 6.4 Medium |
| The Easy Waveform Player plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'easywaveformplayer' shortcode in all versions up to, and including, 1.2.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2024-11748 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 6.4 Medium |
| The Taeggie Feed plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'taeggie-feed' shortcode in all versions up to, and including, 0.1.9 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2024-11662 | 1 Welliamcao | 1 Opsmanage | 2026-04-15 | 6.3 Medium |
| A vulnerability was found in welliamcao OpsManage 3.0.1/3.0.2/3.0.3/3.0.4/3.0.5. It has been rated as critical. This issue affects the function deploy_host_vars of the file /apps/api/views/deploy_api.py of the component API Endpoint. The manipulation leads to deserialization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-9267 | 2 Microsoft, Seagate | 2 Windows, Toolkit | 2026-04-15 | N/A |
| In Seagate Toolkit on Windows a vulnerability exists in the Toolkit Installer prior to versions 2.35.0.6 where it attempts to load DLLs from the current working directory without validating their origin or integrity. This behavior can be exploited by placing a malicious DLL in the same directory as the installer executable, leading to arbitrary code execution with the privileges of the user running the installer. The issue stems from the use of insecure DLL loading practices, such as relying on relative paths or failing to specify fully qualified paths when invoking system libraries. | ||||
| CVE-2025-71070 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ublk: clean up user copy references on ublk server exit If a ublk server process releases a ublk char device file, any requests dispatched to the ublk server but not yet completed will retain a ref value of UBLK_REFCOUNT_INIT. Before commit e63d2228ef83 ("ublk: simplify aborting ublk request"), __ublk_fail_req() would decrement the reference count before completing the failed request. However, that commit optimized __ublk_fail_req() to call __ublk_complete_rq() directly without decrementing the request reference count. The leaked reference count incorrectly allows user copy and zero copy operations on the completed ublk request. It also triggers the WARN_ON_ONCE(refcount_read(&io->ref)) warnings in ublk_queue_reinit() and ublk_deinit_queue(). Commit c5c5eb24ed61 ("ublk: avoid ublk_io_release() called after ublk char dev is closed") already fixed the issue for ublk devices using UBLK_F_SUPPORT_ZERO_COPY or UBLK_F_AUTO_BUF_REG. However, the reference count leak also affects UBLK_F_USER_COPY, the other reference-counted data copy mode. Fix the condition in ublk_check_and_reset_active_ref() to include all reference-counted data copy modes. This ensures that any ublk requests still owned by the ublk server when it exits have their reference counts reset to 0. | ||||
| CVE-2025-68807 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: fix race between wbt_enable_default and IO submission When wbt_enable_default() is moved out of queue freezing in elevator_change(), it can cause the wbt inflight counter to become negative (-1), leading to hung tasks in the writeback path. Tasks get stuck in wbt_wait() because the counter is in an inconsistent state. The issue occurs because wbt_enable_default() could race with IO submission, allowing the counter to be decremented before proper initialization. This manifests as: rq_wait[0]: inflight: -1 has_waiters: True rwb_enabled() checks the state, which can be updated exactly between wbt_wait() (rq_qos_throttle()) and wbt_track()(rq_qos_track()), then the inflight counter will become negative. And results in hung task warnings like: task:kworker/u24:39 state:D stack:0 pid:14767 Call Trace: rq_qos_wait+0xb4/0x150 wbt_wait+0xa9/0x100 __rq_qos_throttle+0x24/0x40 blk_mq_submit_bio+0x672/0x7b0 ... Fix this by: 1. Splitting wbt_enable_default() into: - __wbt_enable_default(): Returns true if wbt_init() should be called - wbt_enable_default(): Wrapper for existing callers (no init) - wbt_init_enable_default(): New function that checks and inits WBT 2. Using wbt_init_enable_default() in blk_register_queue() to ensure proper initialization during queue registration 3. Move wbt_init() out of wbt_enable_default() which is only for enabling disabled wbt from bfq and iocost, and wbt_init() isn't needed. Then the original lock warning can be avoided. 4. Removing the ELEVATOR_FLAG_ENABLE_WBT_ON_EXIT flag and its handling code since it's no longer needed This ensures WBT is properly initialized before any IO can be submitted, preventing the counter from going negative. | ||||
| CVE-2025-68802 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Limit num_syncs to prevent oversized allocations The exec and vm_bind ioctl allow userspace to specify an arbitrary num_syncs value. Without bounds checking, a very large num_syncs can force an excessively large allocation, leading to kernel warnings from the page allocator as below. Introduce DRM_XE_MAX_SYNCS (set to 1024) and reject any request exceeding this limit. " ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1217 at mm/page_alloc.c:5124 __alloc_frozen_pages_noprof+0x2f8/0x2180 mm/page_alloc.c:5124 ... Call Trace: <TASK> alloc_pages_mpol+0xe4/0x330 mm/mempolicy.c:2416 ___kmalloc_large_node+0xd8/0x110 mm/slub.c:4317 __kmalloc_large_node_noprof+0x18/0xe0 mm/slub.c:4348 __do_kmalloc_node mm/slub.c:4364 [inline] __kmalloc_noprof+0x3d4/0x4b0 mm/slub.c:4388 kmalloc_noprof include/linux/slab.h:909 [inline] kmalloc_array_noprof include/linux/slab.h:948 [inline] xe_exec_ioctl+0xa47/0x1e70 drivers/gpu/drm/xe/xe_exec.c:158 drm_ioctl_kernel+0x1f1/0x3e0 drivers/gpu/drm/drm_ioctl.c:797 drm_ioctl+0x5e7/0xc50 drivers/gpu/drm/drm_ioctl.c:894 xe_drm_ioctl+0x10b/0x170 drivers/gpu/drm/xe/xe_device.c:224 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:598 [inline] __se_sys_ioctl fs/ioctl.c:584 [inline] __x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xbb/0x380 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... " v2: Add "Reported-by" and Cc stable kernels. v3: Change XE_MAX_SYNCS from 64 to 1024. (Matt & Ashutosh) v4: s/XE_MAX_SYNCS/DRM_XE_MAX_SYNCS/ (Matt) v5: Do the check at the top of the exec func. (Matt) (cherry picked from commit b07bac9bd708ec468cd1b8a5fe70ae2ac9b0a11c) | ||||
| CVE-2025-68794 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iomap: adjust read range correctly for non-block-aligned positions iomap_adjust_read_range() assumes that the position and length passed in are block-aligned. This is not always the case however, as shown in the syzbot generated case for erofs. This causes too many bytes to be skipped for uptodate blocks, which results in returning the incorrect position and length to read in. If all the blocks are uptodate, this underflows length and returns a position beyond the folio. Fix the calculation to also take into account the block offset when calculating how many bytes can be skipped for uptodate blocks. | ||||
| CVE-2025-68792 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tpm2-sessions: Fix out of range indexing in name_size 'name_size' does not have any range checks, and it just directly indexes with TPM_ALG_ID, which could lead into memory corruption at worst. Address the issue by only processing known values and returning -EINVAL for unrecognized values. Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so that errors are detected before causing any spurious TPM traffic. End also the authorization session on failure in both of the functions, as the session state would be then by definition corrupted. | ||||
| CVE-2025-68781 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: phy: fsl-usb: Fix use-after-free in delayed work during device removal The delayed work item otg_event is initialized in fsl_otg_conf() and scheduled under two conditions: 1. When a host controller binds to the OTG controller. 2. When the USB ID pin state changes (cable insertion/removal). A race condition occurs when the device is removed via fsl_otg_remove(): the fsl_otg instance may be freed while the delayed work is still pending or executing. This leads to use-after-free when the work function fsl_otg_event() accesses the already freed memory. The problematic scenario: (detach thread) | (delayed work) fsl_otg_remove() | kfree(fsl_otg_dev) //FREE| fsl_otg_event() | og = container_of(...) //USE | og-> //USE Fix this by calling disable_delayed_work_sync() in fsl_otg_remove() before deallocating the fsl_otg structure. This ensures the delayed work is properly canceled and completes execution prior to memory deallocation. This bug was identified through static analysis. | ||||
| CVE-2025-68771 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix kernel BUG in ocfs2_find_victim_chain syzbot reported a kernel BUG in ocfs2_find_victim_chain() because the `cl_next_free_rec` field of the allocation chain list (next free slot in the chain list) is 0, triggring the BUG_ON(!cl->cl_next_free_rec) condition in ocfs2_find_victim_chain() and panicking the kernel. To fix this, an if condition is introduced in ocfs2_claim_suballoc_bits(), just before calling ocfs2_find_victim_chain(), the code block in it being executed when either of the following conditions is true: 1. `cl_next_free_rec` is equal to 0, indicating that there are no free chains in the allocation chain list 2. `cl_next_free_rec` is greater than `cl_count` (the total number of chains in the allocation chain list) Either of them being true is indicative of the fact that there are no chains left for usage. This is addressed using ocfs2_error(), which prints the error log for debugging purposes, rather than panicking the kernel. | ||||
| CVE-2025-68271 | 1 Openc3 | 1 Cosmos | 2026-04-15 | 10 Critical |
| OpenC3 COSMOS provides the functionality needed to send commands to and receive data from one or more embedded systems. From 5.0.0 to 6.10.1, OpenC3 COSMOS contains a critical remote code execution vulnerability reachable through the JSON-RPC API. When a JSON-RPC request uses the string form of certain APIs, attacker-controlled parameter text is parsed into values using String#convert_to_value. For array-like inputs, convert_to_value executes eval(). Because the cmd code path parses the command string before calling authorize(), an unauthenticated attacker can trigger Ruby code execution even though the request ultimately fails authorization (401). This vulnerability is fixed in 6.10.2. | ||||
| CVE-2025-64173 | 1 Apollographql | 1 Apollo-router | 2026-04-15 | 7.5 High |
| Apollo Router Core is a configurable graph router written in Rust to run a federated supergraph using Apollo Federation 2. In versions 1.61.11 below, as well as 2.0.0-alpha.0 through 2.8.1-rc.0, a vulnerability allowed for unauthenticated queries to access data that required additional access controls. Router incorrectly handled access control directives on interface types/fields and their implementing object types/fields, applying them to interface types/fields while ignoring directives on their implementing object types/fields when all implementations had the same requirements. Apollo Router customers defining @authenticated, @requiresScopes, or @policy directives inconsistently on polymorphic types (i.e., object types that implement interface types) are impacted. This issue is fixed in versions 1.61.12 and 2.8.1. | ||||
| CVE-2025-68819 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb: dtv5100: fix out-of-bounds in dtv5100_i2c_msg() rlen value is a user-controlled value, but dtv5100_i2c_msg() does not check the size of the rlen value. Therefore, if it is set to a value larger than sizeof(st->data), an out-of-bounds vuln occurs for st->data. Therefore, we need to add proper range checking to prevent this vuln. | ||||
| CVE-2025-62613 | 1 Vdoninja | 1 Vdo.ninja | 2026-04-15 | N/A |
| VDO.Ninja is a tool that brings remote video feeds into OBS or other studio software via WebRTC. From versions 28.0 to before 28.4, a reflected Cross-Site Scripting (XSS) vulnerability exists on examples/control.html through the room parameter, which is improperly sanitized before being rendered in the DOM. The application fails to validate and encode user input, allowing malicious scripts to be injected and executed. This issue has been patched in version 28.4. | ||||
| CVE-2025-62041 | 3 Codexthemes, Elementor, Wordpress | 3 Thegem, Elementor, Wordpress | 2026-04-15 | 7.1 High |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in CodexThemes TheGem (Elementor) thegem-elementor.This issue affects TheGem (Elementor): from n/a through <= 5.10.5.1. | ||||
| CVE-2025-62012 | 3 Codexthemes, Elementor, Wordpress | 3 Thegem, Elementor, Wordpress | 2026-04-15 | 6.5 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in CodexThemes TheGem (Elementor) thegem-elementor.This issue affects TheGem (Elementor): from n/a through <= 5.10.5. | ||||
| CVE-2025-61910 | 1 Nasajpl | 1 Iondtn | 2026-04-15 | 7.5 High |
| The NASA’s Interplanetary Overlay Network (ION) is an implementation of Delay/Disruption Tolerant Networking (DTN). A BPv7 bundle with a malformed extension block causes uncontrolled memory allocation inside ION-DTN 4.1.3s, leading to receiver thread termination and a Denial-of-Service (DoS). The triggering bundle contains an extension block starting at `0x85070201005bbb0e20b4ea001a000927c0...`. The first byte in the extension block (0x85) indicates a CBOR array of five elements of which the first four are numbers (0x07, 0x02, 0x01, 0x00) but the fifth element is a byte string of length 27 (`0x5bbb0e20b4ea001a000927c0...`). The vulnerability seems to be due to processing the fifth element of the array (i.e., the byte string) as replacing it with a number makes the vulnerability no longer be triggered. While parsing this extension block, ION obtains a very large block length, which in the code in `bei.c`:764) seems to be passed from `blockLength` which is an unsigned int, to a 32 bit signed integer `blkSize`. The unsigned to signed conversion causes `blkSize` to hold the value of -369092043, which is then converted into a 64-bit unsigned value inside `MTAKE(blkSize)`, resulting in an attempt to allocate an unrealistic amount of memory, causing the error. As of time of publication, no known patched versions of BPv7 exist. | ||||
| CVE-2025-61776 | 1 Dependencytrack | 1 Dependency-track | 2026-04-15 | 4.7 Medium |
| Dependency-Track is a component analysis platform that allows organizations to identify and reduce risk in the software supply chain. Prior to version 4.13.5, Dependency-Track may send credentials meant for a private NuGet repository to `api.nuget.org` via the HTTP `Authorization` header, and may disclose names and versions of components marked as internal to `api.nuget.org`. This can happen if the Dependency-Track instance contains .NET components, a custom NuGet repository has been configured, the custom repository has been configured with authentication credentials, and the repository server does not provide `PackageBaseAddress` resource in its service index. The issue has been fixed in Dependency-Track 4.13.5. Some workarounds are avaialble. Disable custom NuGet repositories until the patch has been applied, invalidate the previously used credentials, and generate new credentials for usage after the patch has been applied. | ||||
| CVE-2025-60207 | 3 Addify, Woocommerce, Wordpress | 3 Custom User Registration Fields For Woocommerce, Woocommerce, Wordpress | 2026-04-15 | 10 Critical |
| Unrestricted Upload of File with Dangerous Type vulnerability in Addify Custom User Registration Fields for WooCommerce user-registration-plugin-for-woocommerce allows Upload a Web Shell to a Web Server.This issue affects Custom User Registration Fields for WooCommerce: from n/a through <= 2.1.2. | ||||