Export limit exceeded: 341057 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (341057 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-21815 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/compaction: fix UBSAN shift-out-of-bounds warning syzkaller reported a UBSAN shift-out-of-bounds warning of (1UL << order) in isolate_freepages_block(). The bogus compound_order can be any value because it is union with flags. Add back the MAX_PAGE_ORDER check to fix the warning. | ||||
| CVE-2025-21817 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: mark GFP_NOIO around sysfs ->store() sysfs ->store is called with queue freezed, meantime we have several ->store() callbacks(update_nr_requests, wbt, scheduler) to allocate memory with GFP_KERNEL which may run into direct reclaim code path, then potential deadlock can be caused. Fix the issue by marking NOIO around sysfs ->store() | ||||
| CVE-2025-21822 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ptp: vmclock: Set driver data before its usage If vmclock_ptp_register() fails during probing, vmclock_remove() is called to clean up the ptp clock and misc device. It uses dev_get_drvdata() to access the vmclock state. However the driver data is not yet set at this point. Assign the driver data earlier. | ||||
| CVE-2024-58053 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix handling of received connection abort Fix the handling of a connection abort that we've received. Though the abort is at the connection level, it needs propagating to the calls on that connection. Whilst the propagation bit is performed, the calls aren't then woken up to go and process their termination, and as no further input is forthcoming, they just hang. Also add some tracing for the logging of connection aborts. | ||||
| CVE-2024-58057 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: convert workqueues to unbound When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`. | ||||
| CVE-2025-60568 | 2 D-link, Dlink | 3 Dir-600l, Dir-600l, Dir-600l Firmware | 2025-10-28 | 7.5 High |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formAdvFirewall. | ||||
| CVE-2025-60569 | 2 D-link, Dlink | 3 Dir-600l, Dir-600l, Dir-600l Firmware | 2025-10-28 | 7.5 High |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetRoute. | ||||
| CVE-2025-60570 | 2 D-link, Dlink | 3 Dir-600l, Dir-600l, Dir-600l Firmware | 2025-10-28 | 7.5 High |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formLogDnsquery. | ||||
| CVE-2025-60571 | 2 D-link, Dlink | 3 Dir-600l, Dir-600l, Dir-600l Firmware | 2025-10-28 | 7.5 High |
| D-Link DIR600LAx FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetQoS. | ||||
| CVE-2025-60859 | 2 Gnuboard, Sir | 2 Gnuboard5, Gnuboard | 2025-10-28 | 6.1 Medium |
| Cross Site Scripting (XSS) vulnerability in Gnuboard 5.6.15 allows authenticated attackers to execute arbitrary code via crafted c_id parameter in bbs/view_comment.php. | ||||
| CVE-2025-60572 | 2 D-link, Dlink | 3 Dir-600l, Dir-600l, Dir-600l Firmware | 2025-10-28 | 7.5 High |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formAdvNetwork. | ||||
| CVE-2025-60936 | 2 Emoncms, Openenergymonitor | 2 Emoncms, Emoncms | 2025-10-28 | 6.1 Medium |
| Emoncms 11.7.3 is vulnerable to Cross Site in the input handling mechanism. This vulnerability allows authenticated attackers with API access to inject malicious JavaScript code that executes when administrators view the application logs. | ||||
| CVE-2025-60547 | 2 D-link, Dlink | 3 Dir-600l, Dir-600l, Dir-600l Firmware | 2025-10-28 | 7.5 High |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetWAN_Wizard7. | ||||
| CVE-2025-60938 | 2 Emoncms, Openenergymonitor | 2 Emoncms, Emoncms | 2025-10-28 | 7.5 High |
| Emoncms 11.7.3 has a remote code execution vulnerability in the firmware upload feature that allows authenticated users to execute arbitrary commands on the target system. The vulnerability stems from insufficient input validation of user-controlled parameters including filename, port, baud_rate, core, and autoreset within the /admin/upload-custom-firmware endpoint. | ||||
| CVE-2025-60548 | 2 D-link, Dlink | 3 Dir-600l, Dir-600l, Dir-600l Firmware | 2025-10-28 | 9.8 Critical |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formLanSetupRouterSettings. | ||||
| CVE-2025-60549 | 2 D-link, Dlink | 3 Dir-600l, Dir-600l, Dir-600l Firmware | 2025-10-28 | 7.5 High |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formAutoDetecWAN_wizard4. | ||||
| CVE-2025-60550 | 2 D-link, Dlink | 3 Dir-600l, Dir-600l, Dir-600l Firmware | 2025-10-28 | 7.5 High |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formEasySetTimezone. | ||||
| CVE-2025-60551 | 2 D-link, Dlink | 3 Dir-600l, Dir-600l, Dir-600l Firmware | 2025-10-28 | 7.5 High |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the next_page parameter in the function formDeviceReboot. | ||||
| CVE-2025-60553 | 2 D-link, Dlink | 3 Dir-600l, Dir-600l, Dir-600l Firmware | 2025-10-28 | 9.8 Critical |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetWAN_Wizard52. | ||||
| CVE-2025-60552 | 2 D-link, Dlink | 3 Dir-600l, Dir-600l, Dir-600l Firmware | 2025-10-28 | 7.5 High |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formTcpipSetup. | ||||