Export limit exceeded: 85536 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (85536 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46205 | 1 Linux | 1 Linux Kernel | 2026-06-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: media: atomisp: Disallow all private IOCTLs Disallow all private IOCTLs. These aren't quite as safe as one could assume of IOCTL handlers; disable them for now. Instead of removing the code, return in the beginning of the function if cmd is non-zero in order to keep static checkers happy. | ||||
| CVE-2025-38585 | 1 Linux | 1 Linux Kernel | 2026-06-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int() When gmin_get_config_var() calls efi.get_variable() and the EFI variable is larger than the expected buffer size, two behaviors combine to create a stack buffer overflow: 1. gmin_get_config_var() does not return the proper error code when efi.get_variable() fails. It returns the stale 'ret' value from earlier operations instead of indicating the EFI failure. 2. When efi.get_variable() returns EFI_BUFFER_TOO_SMALL, it updates *out_len to the required buffer size but writes no data to the output buffer. However, due to bug #1, gmin_get_var_int() believes the call succeeded. The caller gmin_get_var_int() then performs: - Allocates val[CFG_VAR_NAME_MAX + 1] (65 bytes) on stack - Calls gmin_get_config_var(dev, is_gmin, var, val, &len) with len=64 - If EFI variable is >64 bytes, efi.get_variable() sets len=required_size - Due to bug #1, thinks call succeeded with len=required_size - Executes val[len] = 0, writing past end of 65-byte stack buffer This creates a stack buffer overflow when EFI variables are larger than 64 bytes. Since EFI variables can be controlled by firmware or system configuration, this could potentially be exploited for code execution. Fix the bug by returning proper error codes from gmin_get_config_var() based on EFI status instead of stale 'ret' value. The gmin_get_var_int() function is called during device initialization for camera sensor configuration on Intel Bay Trail and Cherry Trail platforms using the atomisp camera stack. | ||||
| CVE-2020-36785 | 1 Linux | 1 Linux Kernel | 2026-06-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: atomisp: Fix use after free in atomisp_alloc_css_stat_bufs() The "s3a_buf" is freed along with all the other items on the "asd->s3a_stats" list. It leads to a double free and a use after free. | ||||
| CVE-2026-50010 | 1 Netty | 1 Netty | 2026-06-15 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SimpleTrustManagerFactory.engineGetTrustManagers() and related paths wrap any user-supplied plain X509TrustManager in X509TrustManagerWrapper, which extends X509ExtendedTrustManager but implements the 3-arg checkServerTrusted(chain, authType, SSLEngine) by discarding the SSLEngine and calling the 2-arg delegate. Because the object now IS an X509ExtendedTrustManager, neither SunJSSE's internal AbstractTrustManagerWrapper nor Netty's own OpenSslX509TrustManagerWrapper will re-wrap it to add endpoint-identification. Consequently, even though Netty 4.2 sets endpointIdentificationAlgorithm="HTTPS" by default, a client built with `SslContextBuilder.forClient().trustManager(somePlainX509TrustManager)` performs no hostname verification at all. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-48748 | 1 Netty | 1 Netty | 2026-06-15 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to version 4.2.15.Final, a memory exhaustion vulnerability in the Netty HTTP/3 codec allows the creation of an infinite number of blocked streams, which can cause OOM error. Version 4.2.15.Final patches the issue. | ||||
| CVE-2026-50011 | 1 Netty | 1 Netty | 2026-06-15 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, RedisArrayAggregator pre-allocates ArrayList with initial capacity equal to the RESP array element count declared in an array header. That count is taken from the wire before the corresponding child messages exist. A small malicious header can claim a huge initial capacity. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-44249 | 1 Netty | 1 Netty | 2026-06-15 | 8.1 High |
| Netty is a network application framework for development of protocol servers and clients. In netty-handler prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can bypass IPv6 subnet rules due to an incorrect masking operation in IpSubnetFilterRule.compareTo(). Valid public IP addresses can bypass the restrictions. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-44250 | 1 Netty | 1 Netty | 2026-06-15 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-redis prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can cause DoS by sending a crafted Redis payload with deeply nested arrays. This forces the server to allocate a massive number of state objects and collections, leading to memory exhaustion and an OutOfMemoryError. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-44890 | 1 Netty | 1 Netty | 2026-06-15 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-redis prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can cause DoS by sending crafted Redis payloads across multiple connections without `\r\n`. This exhausts the server's direct memory pool (OutOfDirectMemoryError), preventing legitimate connections from being processed. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-44892 | 1 Netty | 1 Netty | 2026-06-15 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to version 4.2.15.Final, the default configuration of the `Http3ConnectionHandler` in the Netty HTTP/3 codec lacks an enforced maximum header size limit. When a peer does not explicitly specify `HTTP3_SETTINGS_MAX_FIELD_SECTION_SIZE`, the implementation defaults to an unbounded limit. This insecure default configuration allows a malicious client or server to send an enormous number of headers, leading to a memory exhaustion Denial of Service via an `OutOfMemoryError`. Version 4.2.15.Final contains a patch. | ||||
| CVE-2026-44893 | 1 Netty | 1 Netty | 2026-06-15 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-haproxy prior to versions 4.1.135.Final and 4.2.15.Final, when decoding a PP2_TYPE_SSL TLV, HAProxyMessage.readNextTLV() first calls `header.retainedSlice(header.readerIndex(), length)` and only then reads the 1-byte client field and 4-byte verify field. If the attacker sets the TLV length below 5, the subsequent readByte/readInt throws IndexOutOfBoundsException. HAProxyMessageDecoder only catches HAProxyProtocolException around this call, so the IOOBE propagates and the retained slice on the pooled cumulation buffer is never released. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-44894 | 1 Netty | 1 Netty | 2026-06-15 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. NoQuicTokenHandler is the tokenHandler used when the application does not set one. Prior to version 4.2.15.Final, its writeToken() returns false (server will not send Retry — acceptable), but validateToken() unconditionally `return 0`. In QuicheQuicServerCodec.handlePacket(), a non-negative return from validateToken() is interpreted as 'token is valid, ODCID starts at offset 0', causing the server to call quiche_accept as if the client's address had been validated by a Retry round-trip. Per RFC 9000 §8.1, a validated address lifts the 3× anti-amplification send limit. Thus any attacker who includes ANY non-empty token bytes in an Initial packet — with a spoofed victim source IP — causes the Netty server to treat the victim as validated and reflect full-size handshake flights (certificates, etc.) toward it without the 3× cap. The correct 'no token handler' semantics would be to return -1 (invalid) so the normal un-validated path and amplification limit apply. Version 4.2.15.Final patches the issue. | ||||
| CVE-2026-45416 | 1 Netty | 1 Netty | 2026-06-15 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SslClientHelloHandler.decode() reads the 24-bit TLS handshake length and, when the ClientHello does not fit in the first record, eagerly allocates `ctx.alloc().buffer(handshakeLength)` (line 161). The guard at line 140 is `handshakeLength > maxClientHelloLength && maxClientHelloLength != 0`, and the commonly-used SniHandler/AbstractSniHandler constructors (SniHandler(Mapping), SniHandler(AsyncMapping), AbstractSniHandler()) pass maxClientHelloLength=0 and handshakeTimeoutMillis=0, so the length guard is disabled and no timeout is scheduled. A 16 MiB request exceeds the default pooled chunk size and becomes a huge/unpooled allocation performed immediately. The buffer is retained in the handler until the channel closes. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-46340 | 1 Netty | 1 Netty | 2026-06-15 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. In versions of netty-transport-sctp prior to 4.1.135.Final and 4.2.15.Final, for each non-complete SctpMessage fragment the handler does `fragments.put(streamId, Unpooled.wrappedBuffer(frag, byteBuf))`, wrapping the previous accumulator and the new slice into a *new* CompositeByteBuf every time. After N fragments the accumulator is an N-deep chain of composites, each holding references and component arrays; readableBytes()/getBytes() on the final buffer recurse N levels. There is no limit on N, on total bytes, or on the number of streamIdentifiers an attacker can open (each gets its own map entry). A peer that never sets the `complete` flag can grow this structure indefinitely from tiny 1-byte DATA chunks. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-53721 | 1 Nuxt | 1 Nuxt | 2026-06-15 | 8.2 High |
| Nuxt is an open-source web development framework for Vue.js. From versions 3.11.0 to before 3.21.7 and 4.0.0 to before 4.4.7, there is a route-rule middleware bypass via case-sensitivity mismatch between vue-router and the routeRules matcher. This issue has been patched in versions 3.21.7 and 4.4.7. | ||||
| CVE-2026-47691 | 1 Netty | 1 Netty | 2026-06-15 | 8.7 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, Netty's `DnsResolveContext` insufficiently validates the bailiwick of NS records, enabling DNS Cache Poisoning. An attacker controlling an authoritative name server for a subdomain can poison the cache for parent domains (like `.co.uk`). In `io.netty.resolver.dns.DnsResolveContext.AuthoritativeNameServerList#add` method accepts any NS record from the AUTHORITY section as long as the record's name is a suffix of the questionName. Subsequently, the `handleWithAdditional` method caches the associated A records from the ADDITIONAL section directly into the `authoritativeDnsServerCache` under the parent domain's key. This bypasses standard bailiwick rules, where a server authoritative for a subdomain should not be trusted to provide authoritative records for its parent. The poisoned cache is then used for all future resolutions under the parent domain's key. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-48006 | 1 Netty | 1 Netty | 2026-06-15 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, the RedisArrayAggregator handler permanently leaks pooled direct-memory buffers when a Redis pipeline connection closes before a RESP array aggregate completes. The handler retains child messages in per-handler state (`depths` field) but defines no `channelInactive`, `handlerRemoved`, or `exceptionCaught` method to release them when the pipeline tears down. Because the leaked buffers are slices of `PooledByteBufAllocator` chunks, they prevent those chunks from being returned to the JVM-wide direct-memory pool. Repeated connection churn by any network peer monotonically drains this shared pool, eventually causing allocation failures on all Netty channels in the process. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-48059 | 1 Netty | 1 Netty | 2026-06-15 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, the HAProxy PROXY protocol v2 codec in netty leaks native or heap memory on every connection when a client sends a syntactically valid header containing nested `PP2_TYPE_SSL` TLVs (type-length-value records) at depth two or greater. The leak occurs on the successful parse path — no exception is thrown, the message fires downstream, the decoder removes itself, and the application releases the `HAProxyMessage` normally. Yet the underlying cumulation buffer (a pooled, potentially direct `ByteBuf` allocated by the channel) remains permanently pinned. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-10087 | 1 Gitlab | 1 Gitlab | 2026-06-15 | 8.7 High |
| GitLab has remediated an issue in GitLab EE affecting all versions from 17.1 before 18.10.8, 18.11 before 18.11.5, and 19.0 before 19.0.2 that under certain conditions could have allowed an authenticated user with developer-role permissions to execute arbitrary client-side code on behalf of a targeted user due to improper input sanitization in the Analytics Dashboard. | ||||
| CVE-2026-5598 | 1 Bouncycastle | 1 Bc-java | 2026-06-14 | 7.5 High |
| Covert timing channel vulnerability in Legion of the Bouncy Castle Inc. BC-JAVA core on all (core modules). This vulnerability is associated with program files FrodoEngine.Java. This issue affects BC-JAVA: from 1.71 before 1.80.2, from 1.81 before 1.81.1, from 1.82 before 1.84. | ||||