| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Netty's HttpServerCodec (io.netty:netty-codec-http) in versions 4.2.0.Final through 4.2.16.Final and in versions up to and including 4.1.136.Final pairs each outbound response with an inbound request by calling pollMethod() once per response, including for 1xx informational responses. If a client pipelines an HTTP/1.1 GET carrying an Expect: 100-continue header followed by a HEAD request, the 100 Continue response consumes the queued GET method, so the subsequent 200 OK for the GET is paired with HEAD and its body is dropped, while the following 200 OK for the HEAD request is written with a body. This desynchronizes HTTP parsing on the connection: the GET entity is never delivered and the HEAD response body is interpreted as the GET body, resulting in response splitting and unsafe connection reuse. Fixed in 4.2.17.Final and 4.1.137.Final. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.2.Final through 4.2.17.Final builds the HTTP/3 :authority pseudo-header from the HTTP/1 Host header before considering the authority of an absolute-form HTTP/1 request-target. In HttpConversionUtil.toHttp3Headers(HttpMessage, boolean) — reached via Http3FrameToHttpObjectCodec(false) — a non-empty Host header takes precedence over the request-target authority, contrary to the HTTP/1.1 rule that a server receiving an absolute-form request-target must ignore the Host header. In a Netty-based HTTP/1-to-HTTP/3 gateway, proxy, or protocol bridge, a remote client can send a request such as "GET https://trusted.example/admin HTTP/1.1" with "Host: attacker.example", causing components that validate, authorize, or route on the RFC-defined request-target authority to reach a different decision than the upstream HTTP/3 peer, which receives :authority derived from the conflicting Host header. This authority confusion can affect virtual-host routing, allow-list checks, backend selection, cache keys, and URL generation. The advisory reports integrity impact only (no code execution, memory corruption, or availability impact). Fixed in 4.2.18.Final. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) in versions 4.2.0.Final through 4.2.17.Final does not enforce the RFC 9114 requirement that the :authority pseudo-header field and a literal host header field, when both present, carry the same value. A remote unauthenticated peer can send a single HEADERS frame containing both fields with differing, attacker-controlled values; the request is accepted and delivered to the application with two conflicting authorities, allowing routing, virtual-host, and access-control decisions to be bypassed when different components in the request path consult different fields. This issue is fixed in 4.2.18.Final. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.0.Final through 4.2.17.Final retains unbounded per-stream QPACK encoder state. QpackEncoder stores a queue and a dynamic-table index tracker for every encoded field section that references the QPACK dynamic table, keyed by the peer-controlled QUIC stream ID, and these entries are released only when the remote decoder sends a Section Acknowledgment or Stream Cancellation instruction — not when the HTTP/3 stream completes. There is no limit on the number of tracked streams, field sections, or retained bytes. A remote, unauthenticated HTTP/3 client can advertise a non-zero QPACK dynamic-table capacity, acknowledge the table insertion so the server reuses a dynamically indexed response header, and then omit all mandatory Section Acknowledgments while issuing sequential requests over a single QUIC connection, bypassing concurrent-stream limits and causing unbounded heap growth until the server exhausts memory (denial of service). Fixed in 4.2.18.Final. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain a denial-of-service vulnerability in the QPACK prefixed-integer decoder (QpackUtil.decodePrefixedInteger), which does not bound the number of continuation bytes it will process. A remote, unauthenticated peer can open a QPACK unidirectional stream (type 0x02 encoder or 0x03 decoder) and send a first byte with all prefix bits set (e.g. 0xFF for a 7-bit prefix or 0x3F for a 5-bit prefix) followed by an endless run of 0x80 continuation bytes. The decoder returns -1 ('need more bytes'), so callers never consume the input, the ByteToMessageDecoder cumulator grows without bound, and each decode() invocation re-scans the whole accumulated buffer, yielding O(N^2) CPU cost. The result is unbounded per-connection heap growth (OutOfMemoryError) and event-loop CPU starvation, reachable in every configuration. Fixed in 4.2.18.Final. |
| Netty versions from 4.2.11.Final before 4.2.18.Final contain an incomplete hostname verification fix in the QUIC certificate verification path when using a plain X509TrustManager. The BoringSSLCertificateVerifyCallback discards the SSLEngine for plain trust managers, preventing endpoint identification from running even when HTTPS verification is configured. Attackers on the network path can present a certificate chain for the wrong hostname that the plain trust manager accepts, bypassing hostname authentication for QUIC clients. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.2.Final through 4.2.17.Final does not special-case HTTP/1 CONNECT authority-form request-targets when converting HTTP/1 messages to HTTP/3 in HttpConversionUtil.toHttp3Headers. The authority-form target (e.g., "CONNECT trusted.example:443") is parsed as a URI, so its host is emitted as :scheme, :path is set to "/", and the HTTP/1 Host header is used as :authority; if no Host header is present the CONNECT target is dropped. In a Netty-based HTTP/1-to-HTTP/3 proxy or gateway, a remote client can send a CONNECT request whose Host header names a different authority than the request-target, producing a malformed HTTP/3 CONNECT whose tunnel :authority is attacker-controlled. This can bypass tunnel allow-lists, egress policy, backend selection, or audit controls that validate the HTTP/1 CONNECT request-target before forwarding over HTTP/3. The issue is fixed in 4.2.18.Final. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain an uncontrolled resource consumption vulnerability in the QPACK encoder-stream instruction decoder (QpackEncoderHandler, installed on the peer-initiated unidirectional QPACK encoder stream, type 0x02). The handler accepts an attacker-declared string-literal length of up to Integer.MAX_VALUE (~2 GiB) for the Name Length and Value Length fields of the "Insert With Literal Name" instruction (RFC 9204 §4.3.3), with no per-instruction or per-literal length cap and no cumulation-size limit; the existing HTTP/3 limits (maxHeaderListSize, maxUnknownFramePayloadLength, DEFAULT_MAX_FIELD_SECTION_SIZE) are not applied to this handler. A remote, unauthenticated peer with an established HTTP/3 connection to a default Netty HTTP/3 server can declare a very large literal length and then trickle fewer bytes than declared, causing the ByteToMessageDecoder MERGE cumulator to retain and grow the per-connection buffer, and ultimately triggering a large byte-array allocation. This leads to unbounded per-connection heap growth and OutOfMemoryError, resulting in denial of service. Fixed in 4.2.18.Final. |
| Netty (io.netty:netty-codec-http) contains an unbounded per-connection queue in WebSocketServerExtensionHandler. The handler offers an entry to its per-channel validExtensions queue for every inbound HttpRequest, but polls an entry only when the application writes an HttpResponse, and the queue size is never bounded. A remote, unauthenticated peer can use HTTP/1.1 pipelining to send requests faster than the application produces responses — including plain non-upgrade HTTP requests to any path — causing the queue to grow without limit until the JVM exhausts heap memory and terminates with OutOfMemoryError. Because the affected handler is the base class of WebSocketServerCompressionHandler, any server that enables permessage-deflate is exposed on its plain HTTP port before any WebSocket upgrade completes and before any application-level authentication. Affected versions are 4.1.88.Final through 4.1.137.Final and 4.2.0.Final through 4.2.17.Final; the issue is fixed in 4.1.138.Final and 4.2.18.Final. |
| Netty's STOMP codec (io.netty:netty-codec-stomp) contains a ByteBuf leak in StompSubframeDecoder. Once a frame's declared content-length has been fully read, the decoder allocates a chunk buffer from the channel allocator and parks it in an instance field while waiting for the single NUL byte that terminates the frame. If that byte never arrives, the buffer is never released: the replay Signal thrown by skipNullCharacter extends Error rather than Exception, so the decoder's catch(Exception) release path does not run, and StompSubframeDecoder overrides neither handlerRemoved0 nor channelInactive, so the buffer also survives channel teardown. A remote peer can leak one allocator buffer per connection by sending a complete, well-formed frame body and withholding its terminating NUL byte; with the default pooled allocator the memory is never returned to the pool or reclaimed by garbage collection, so the leak accumulates for the lifetime of the process and can lead to memory exhaustion. This affects versions up to and including 4.1.137.Final and versions 4.2.0.Final through 4.2.17.Final; it is fixed in 4.1.138.Final and 4.2.18.Final. |
| Netty (io.netty:netty-codec-http) contains an unbounded per-connection queue growth flaw in HttpServerCodec. The codec tracks the HTTP method of each still-unanswered pipelined request; the first 32 entries are bit-packed into a single long, but every additional entry is appended to methodOverflowQueue, an ArrayDeque with no size limit and no rejection path. A remote, unauthenticated attacker who pipelines HTTP/1.1 requests on a single connection while withholding reads on their own end (preventing responses from being flushed) can grow this queue without bound, causing unbounded heap growth and denial of service. Affected versions are 4.2.0.Final through 4.2.17.Final and all releases up to and including 4.1.137.Final; the issue is fixed in 4.2.18.Final and 4.1.138.Final. |
| Netty (io.netty:netty-codec-http) versions up to and including 4.1.137.Final and from 4.2.0.Final through 4.2.17.Final accept an unlimited number of concurrent remote-initiated SPDY streams: SpdySessionHandler defaults localConcurrentStreams to Integer.MAX_VALUE and exposes no API to change it. A remote peer that opens a SPDY connection and sends millions of SYN_STREAM frames with FLAG_FIN=0 causes the server to allocate unbounded heap and direct memory, eventually triggering a JVM OutOfMemoryError and crashing the service. Fixed in 4.1.138.Final and 4.2.18.Final. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, the RedisArrayAggregator Redis codec clears retained partial aggregate state when the maxNestedArrayDepth limit is exceeded, but it does not clear the same state when the sibling maxElements limit is exceeded. A peer can start a valid RESP array, send a bulk string child, then send a nested array header longer than the configured maxElements. Netty throws a decoder exception in decodeRedisArrayHeader, but the existing partial aggregate remains retained in the handler. If the application leaves the channel alive after the exception, later messages are still consumed into the pre-error aggregate, allowing an unauthenticated peer to keep attacker-controlled aggregate state alive across a security-limit exception and pin retained pooled buffers. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, io.netty.handler.codec.xml.XmlFrameDecoder.decode() failed to preserve closing-tag parser state across invocations, so an unauthenticated remote attacker could trickle-feed repeated </ sequences that repeatedly rescanned the accumulated buffer and exhausted an EventLoop thread's CPU, causing denial of service with a maxFrameLength of 1 MB. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, io.netty.handler.codec.dns.AbstractDnsRecord, io.netty.handler.codec.dns.DefaultDnsRecordDecoder.decodeRecord(), and io.netty.handler.codec.dns.DnsCodecUtil.decompressDomainName() failed to release retained or newly allocated ByteBuf objects when IDN.toASCII() or encodeDomainName() rejected a malformed domain name, allowing unauthenticated remote DNS packets to leak direct memory incrementally until denial of service. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.137.Final and 4.2.17.Final, io.netty.handler.codec.sctp.SctpMessageCompletionHandler limits incomplete messages and fragment counts but not maxBufferedBytes, allowing unauthenticated peers to exhaust memory with large SCTP fragments. This issue is fixed in versions 4.1.137.Final and 4.2.17.Final. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.137.Final and 4.2.17.Final, io.netty.handler.codec.http.cors.CorsHandler setVaryHeader replaces application Vary headers such as Authorization or Cookie with Origin, allowing a caching proxy or CDN to reuse authenticated responses across users and disclose sensitive information. This issue is fixed in versions 4.1.137.Final and 4.2.17.Final. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.137.Fina and 4.2.17.Final, io.netty.handler.ssl.SslClientHelloHandler#decode checks the wrong offset before reading the four-byte TLS handshake header, so a ClientHello whose handshake header spans records can cause an IndexOutOfBoundsException and invoke select(ctx, null). This selects the default SslContext instead of the SNI-specific context. In deployments where per-SNI clientAuth=REQUIRE is the sole mutual TLS gate, the default SslContext uses clientAuth=NONE or clientAuth=OPTIONAL, and no application-layer certificate verification exists, an unauthenticated remote attacker can bypass the protected route's mutual TLS requirement. This issue is fixed in versions 4.1.137.Final and 4.2.17.Final. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.137.Final and 4.2.17.Final, the default io.netty.handler.ssl.SniHandler constructors use the pre-handshake ClientHello aggregation path in handler/src/main/java/io/netty/handler/ssl/SslClientHelloHandler.java at io.netty.handler.ssl.SslClientHelloHandler#decode, where handshakeBuffer.clear() and writeBytes() recopy all previously received body bytes for every additional TLS record. An unauthenticated remote peer can advertise a large ClientHello and deliver its body in thousands of tiny records, causing quadratic CPU work on the event loop before the TLS handshake completes and degrading TLS handling for other clients. This issue is fixed in versions 4.1.137.Final and 4.2.17.Final. |
| Netty versions 4.1.133.Final through 4.1.137.Final and 4.2.13.Final through 4.2.17.Final fail to properly validate the final transfer coding in the Transfer-Encoding header, allowing attackers to smuggle requests by using malformed encoding declarations. Attackers can split Transfer-Encoding headers across multiple lines or use values like 'chunked, xchunked' to bypass validation and decode messages as chunked when the final coding is not chunked, enabling request smuggling attacks. |
