| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A path traversal vulnerability exists in the Netgear SPH200D Skype phone firmware versions <= 1.0.4.80 in its embedded web server. Authenticated attackers can exploit crafted GET requests to access arbitrary files outside the web root by injecting traversal sequences. This can expose sensitive system files and configuration data. |
| An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN2200B model) firmware versions 1.0.0.36 and prior via the pppoe.cgi endpoint. A remote attacker with valid credentials can execute arbitrary commands via crafted input to the pppoe_username parameter. This flaw allows full compromise of the device and may persist across reboots unless configuration is restored. |
| FunJSQ, a third-party module integrated on some NETGEAR routers and Orbi WiFi Systems, exposes an HTTP server over the LAN interface of affected devices. This interface is vulnerable to unauthenticated arbitrary command injection through the funjsq_access_token parameter. This affects R6230 before 1.1.0.112, R6260 before 1.1.0.88, R7000 before 1.0.11.134, R8900 before 1.0.5.42, R9000 before 1.0.5.42, and XR300 before 1.0.3.72 and Orbi RBR20 before 2.7.2.26, RBR50 before 2.7.4.26, RBS20 before 2.7.2.26, and RBS50 before 2.7.4.26. |
| FunJSQ, a third-party module integrated on some NETGEAR routers and Orbi WiFi Systems, does not properly validate TLS certificates when downloading update packages through its auto-update mechanism. An attacker (suitably positioned on the network) could intercept the update request and deliver a malicious update package in order to gain arbitrary code execution on affected devices. This affects R6230 before 1.1.0.112, R6260 before 1.1.0.88, R7000 before 1.0.11.134, R8900 before 1.0.5.42, R9000 before 1.0.5.42, and XR300 before 1.0.3.72 and Orbi RBR20 before 2.7.2.26, RBR50 before 2.7.4.26, RBS20 before 2.7.2.26, and RBS50 before 2.7.4.26. |
| Improper Input Validation vulnerability in NETGEAR R6260 and NETGEAR R6850 allows unauthenticated attackers connected to LAN with ability to perform MiTM attacks and control over DNS Server to perform command execution.This issue affects R6260: through 1.1.0.86; R6850: through 1.1.0.86. |
| Improper certificate
validation in firmware update logic in NETGEAR RAX30 (Nighthawk AX5 5-Stream
AX2400 WiFi 6 Router) and RAXE300 (Nighthawk AXE7800 Tri-Band
WiFi 6E Router) allows attackers with the ability to intercept and
tamper traffic destined to the device to execute arbitrary commands on the
device.
Devices
with automatic updates enabled may already have this patch applied. If not,
please check the firmware version and update to the
latest.
Fixed in:
RAX30 firmware
1.0.14.108 or later.
RAXE300 firmware
1.0.9.82 or later |
| Improper input validation
in NETGEAR DGN2200v4 (N300 Wireless ADSL2+ Modem Router) allows attackers with
direct network access to the device to potentially execute code on the device.
Please check the firmware version and update to the latest.
Fixed
in:
DGN2200v4
firmware 1.0.0.132 or later |
| A vulnerability in the speedtest feature of affected NETGEAR Nighthawk routers, caused by improper input validation, can allow attackers on the router's WAN side, using attacker-in-the-middle techniques (MiTM) to manipulate DNS responses and execute commands when speedtests are run.
This issue affects RS700: through 1.0.7.82; RAX54Sv2 : before V1.1.6.36; RAX41v2: before V1.1.6.36; RAX50: before V1.2.14.114; RAXE500: before V1.2.14.114; RAX41: before V1.0.17.142; RAX43: before V1.0.17.142; RAX35v2: before V1.0.17.142; RAXE450: before V1.2.14.114; RAX43v2: before V1.1.6.36; RAX42: before V1.0.17.142; RAX45: before V1.0.17.142; RAX50v2: before V1.1.6.36; MR90: before V1.0.2.46; MS90: before V1.0.2.46; RAX42v2: before V1.1.6.36; RAX49S: before V1.1.6.36. |
| An insufficient input validation vulnerability in NETGEAR Orbi routers
allows attackers connected to the router's LAN to execute OS command
injections. |
| An authentication bypass vulnerability in NETGEAR Orbi devices allows
users connected to the local network to access the router web interface
as an admin. |
| An insufficient input validation vulnerability in the NETGEAR XR1000v2
allows attackers connected to the router's LAN to execute OS command
injections. |
| An insufficient authentication vulnerability in NETGEAR WiFi range
extenders allows a network adjacent attacker with WiFi authentication or
a physical Ethernet port connection to bypass the authentication
process and access the admin panel. |
| A path traversal vulnerability in NETGEAR WiFi range extenders allows
an attacker with LAN authentication to access the router's IP and
review the contents of the dynamically generated webproc file, which
records the username and password submitted to the router GUI. |
| An insufficient input validation vulnerability in NETGEAR Orbi devices'
DHCPv6 functionality allows network adjacent attackers authenticated
over WiFi or on LAN to execute OS command injections on the router.
DHCPv6 is not enabled by default. |
| Some end of service NETGEAR products provide "TelnetEnable" functionality, which allows a magic packet to activate telnet service on the box. |
| An issue in Netgear DGN1000WW v.1.1.00.45 allows a remote attacker to execute arbitrary code via the Diagnostics page |
| Denial of Service Vulnerability in NETGEAR C6220 and C6230 (DOCSIS® 3.0 Two-in-one Cable Modem + WiFi Router) allows authenticated local WiFi users reboot the router. |
| A vulnerability in NETGEAR Nighthawk R7000P routers lets an authenticated admin execute OS command injections due to improper input validation.
This issue affects R7000P: through 1.3.3.154. |
| dnslookup.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the host_name field of an HTTP POST request, a different vulnerability than CVE-2017-6077. |
| Netgear EX8000 V1.0.0.126 is vulnerable to Command Injection via the iface parameter in the action_bandwidth function. |
