| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit().
nfsd_nl_listener_set_doit() uses get_current_cred() without
put_cred().
As we can see from other callers, svc_xprt_create_from_sa()
does not require the extra refcount.
nfsd_nl_listener_set_doit() is always in the process context,
sendmsg(), and current->cred does not go away.
Let's use current_cred() in nfsd_nl_listener_set_doit(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Cleanup partially initialized sync on parse failure
xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence,
or user fence) before hitting a later failure path. Several of those paths
returned directly, leaving partially initialized state and leaking refs.
Route these error paths through a common free_sync label and call
xe_sync_entry_cleanup(sync) before returning the error.
(cherry picked from commit f939bdd9207a5d1fc55cced5459858480686ce22) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Fix user fence leak on alloc failure
When dma_fence_chain_alloc() fails, properly release the user fence
reference to prevent a memory leak.
(cherry picked from commit a5d5634cde48a9fcd68c8504aa07f89f175074a0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: Fix memory leak in error path
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration. |
| Insufficient policy enforcement in WebUI in Google Chrome on Linux, Mac, Windows, ChromeOS prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here. |
| Insufficient data validation in InterestGroups in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Insufficient policy enforcement in Downloads in Google Chrome prior to 148.0.7778.96 allowed a local attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in Navigation in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient policy enforcement in DevTools in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to potentially perform a sandbox escape via malicious network traffic. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling
The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically
managed and tied to userspace configuration via ConfigFS. It can be
NULL if the USB host sends requests before the nexus is fully
established or immediately after it is dropped.
Currently, functions like `bot_submit_command()` and the data
transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately
dereference `tv_nexus->tvn_se_sess` without any validation. If a
malicious or misconfigured USB host sends a BOT (Bulk-Only Transport)
command during this race window, it triggers a NULL pointer
dereference, leading to a kernel panic (local DoS).
This exposes an inconsistent API usage within the module, as peer
functions like `usbg_submit_command()` and `bot_send_bad_response()`
correctly implement a NULL check for `tv_nexus` before proceeding.
Fix this by bringing consistency to the nexus handling. Add the
missing `if (!tv_nexus)` checks to the vulnerable BOT command and
request processing paths, aborting the command gracefully with an
error instead of crashing the system. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: pn533: bound the UART receive buffer
pn532_receive_buf() appends every incoming byte to dev->recv_skb and
only resets the buffer after pn532_uart_rx_is_frame() recognizes a
complete frame. A continuous stream of bytes without a valid PN532 frame
header therefore keeps growing the skb until skb_put_u8() hits the tail
limit.
Drop the accumulated partial frame once the fixed receive buffer is full
so malformed UART traffic cannot grow the skb past
PN532_UART_SKB_BUFF_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: set platform driver data
Add missing platform_set_drvdata() as the data will be used in remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/uncore: Fix die ID init and look up bugs
In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path,
uncore_device_to_die() may return -1 when all CPUs associated
with the UBOX device are offline.
Remove the WARN_ON_ONCE(die_id == -1) check for two reasons:
- The current code breaks out of the loop. This is incorrect because
pci_get_device() does not guarantee iteration in domain or bus order,
so additional UBOX devices may be skipped during the scan.
- Returning -EINVAL is incorrect, since marking offline buses with
die_id == -1 is expected and should not be treated as an error.
Separately, when NUMA is disabled on a NUMA-capable platform,
pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die()
to return -1 for all PCI devices. As a result,
spr_update_device_location(), used on Intel SPR and EMR, ignores the
corresponding PMON units and does not add them to the RB tree.
Fix this by using uncore_pcibus_to_dieid(), which retrieves topology
from the UBOX GIDNIDMAP register and works regardless of whether NUMA
is enabled in Linux. This requires snbep_pci2phy_map_init() to be
added in spr_uncore_pci_init().
Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where
NUMA is expected to be enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix memory leak on failure path
cfg80211_inform_bss_frame() may return NULL on failure. In that case,
the allocated buffer 'buf' is not freed and the function returns early,
leading to potential memory leak.
Fix this by ensuring that 'buf' is freed on both success and failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: Clear reconnect pending bit
When canceling the reconnect worker, care must be taken to reset the
reconnect-pending bit. If the reconnect worker has not yet been
scheduled before it is canceled, the reconnect-pending bit will stay
on forever. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: No shortcut out of RDS_CONN_ERROR
RDS connections carry a state "rds_conn_path::cp_state"
and transitions from one state to another and are conditional
upon an expected state: "rds_conn_path_transition."
There is one exception to this conditionality, which is
"RDS_CONN_ERROR" that can be enforced by "rds_conn_path_drop"
regardless of what state the condition is currently in.
But as soon as a connection enters state "RDS_CONN_ERROR",
the connection handling code expects it to go through the
shutdown-path.
The RDS/TCP multipath changes added a shortcut out of
"RDS_CONN_ERROR" straight back to "RDS_CONN_CONNECTING"
via "rds_tcp_accept_one_path" (e.g. after "rds_tcp_state_change").
A subsequent "rds_tcp_reset_callbacks" can then transition
the state to "RDS_CONN_RESETTING" with a shutdown-worker queued.
That'll trip up "rds_conn_init_shutdown", which was
never adjusted to handle "RDS_CONN_RESETTING" and subsequently
drops the connection with the dreaded "DR_INV_CONN_STATE",
which leaves "RDS_SHUTDOWN_WORK_QUEUED" on forever.
So we do two things here:
a) Don't shortcut "RDS_CONN_ERROR", but take the longer
path through the shutdown code.
b) Add "RDS_CONN_RESETTING" to the expected states in
"rds_conn_init_shutdown" so that we won't error out
and get stuck, if we ever hit weird state transitions
like this again." |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: Replace BUG_ON with error handling for CNID count checks
In a06ec283e125 next_id, folder_count, and file_count in the super block
info were expanded to 64 bits, and BUG_ONs were added to detect
overflow. This triggered an error reported by syzbot: if the MDB is
corrupted, the BUG_ON is triggered. This patch replaces this mechanism
with proper error handling and resolves the syzbot reported bug.
Singed-off-by: Jori Koolstra <jkoolstra@xs4all.nl> |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets
When a TX packet spans multiple buffer descriptors (scatter-gather),
axienet_free_tx_chain sums the per-BD actual length from descriptor
status into a caller-provided accumulator. That sum is reset on each
NAPI poll. If the BDs for a single packet complete across different
polls, the earlier bytes are lost and never credited to BQL. This
causes BQL to think bytes are permanently in-flight, eventually
stalling the TX queue.
The SKB pointer is stored only on the last BD of a packet. When that
BD completes, use skb->len for the byte count instead of summing
per-BD status lengths. This matches netdev_sent_queue(), which debits
skb->len, and naturally survives across polls because no partial
packet contributes to the accumulator. |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Use irq_work to start GP in tiny SRCU
Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(),
which acquires the workqueue pool->lock.
This causes a lockdep splat when call_srcu() is called with a scheduler
lock held, due to:
call_srcu() [holding pi_lock]
srcu_gp_start_if_needed()
schedule_work() -> pool->lock
workqueue_init() / create_worker() [holding pool->lock]
wake_up_process() -> try_to_wake_up() -> pi_lock
Also add irq_work_sync() to cleanup_srcu_struct() to prevent a
use-after-free if a queued irq_work fires after cleanup begins.
Tested with rcutorture SRCU-T and no lockdep warnings.
[ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work
to start process_srcu()" ] |
