| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
openrisc: Fix jump_label smp syncing
The original commit 8c30b0018f9d ("openrisc: Add jump label support")
copies from arm64 and does not properly consider how icache invalidation
on remote cores works in OpenRISC. On OpenRISC remote icaches need to
be invalidated otherwise static key's may remain state after updating.
Fix SMP cache syncing by:
1. Properly invalidate remote core icaches on SMP systems by using
icache_all_inv. The old code uses kick_all_cpus_sync() which runs a
no-op IPI function call on remote CPU's which does execute a lot of
code and flushes many cache lines in the process, but does not flush
all and it's not correct on OpenRISC.
2. For architectures that do not have WRITETHROUGH caches be sure
to flush the dcache after patching.
To test this I first reproduced the issue using a custom test module
[0]. The test confirmed that some icache lines maintained stale
static_key code sequences after calling static_branch_enable(). After
this patch there are no longer jump_label coherency issues.
[0] https://github.com/stffrdhrn/or1k-utils/tree/master/tests/smp_static_key_test |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: put stats for scheme_add_dirs() internal error
damon_sysfs_scheme_add_dirs() setup the tried_regions directory after the
stats directory setup is completed. When the tried_regions directory
setup is failed, the setup function ensures the reference for the tried
regions directory is released. Hence the error path should put references
on setup succeeded directory objects, starting from the stats directory.
However, the error path is putting the tried_regions directory instead of
the stats directory.
As a direct result, the stats directory object is leaked. Worse yet, if
the tried_regions directory setup failed from the initial allocation, the
scheme->tried_regions field remains uninitialized. The following
kobject_put(&scheme->tried_regions->kobj) call in the error path will
dereference the uninitialized memory. The setup failures should not be
common. But once it happens, the consequence is quite bad.
Fix this issue by correctly putting the stats directory instead of the
tried_regions directory.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: fix dir put orders in access_pattern_add_dirs()
Patch series "mm/damon/sysfs-schemes: fix wrong directories put orders in
error paths".
Error paths of damon_sysfs_access_pattern_add_dirs() and
damon_sysfs_scheme_add_dirs() functions put references to directories in
wrong orders. As a result, uninitialized memory dereference and/or
memory leak can happen. Fix those.
This patch (of 2):
In access_pattern_add_dirs(), error handling path puts references starting
from setup failed directories. If the failure happpened from the initial
allication in the setup functions, uninitialized memory dereference
happen. The allocation failures will not commonly happen, but the
consequence is quite bad. Fix the wrong reference put orders.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory_hotplug: fix incorrect altmap passing in error path
In create_altmaps_and_memory_blocks(), when arch_add_memory() succeeds
with memmap_on_memory enabled, the vmemmap pages are allocated from
params.altmap. If create_memory_block_devices() subsequently fails, the
error path calls arch_remove_memory() with a NULL altmap instead of
params.altmap.
This is a bug that could lead to memory corruption. Since altmap is NULL,
vmemmap_free() falls back to freeing the vmemmap pages into the system
buddy allocator via free_pages() instead of the altmap.
arch_remove_memory() then immediately destroys the physical linear mapping
for this memory. This injects unowned pages into the buddy allocator,
causing machine checks or memory corruption if the system later attempts
to allocate and use those freed pages.
Fix this by passing params.altmap to arch_remove_memory() in the error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: reacquire gw address after skb realloc
The pskb_may_pull() called by batadv_bla_is_backbone_gw() could reallocate
the buffer behind the skb. Variables which were pointing to the old buffer
need to be reassigned to avoid an use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat_sip: reload possible stale data pointer
quoting sashiko:
------------------------------------------------------------------------
[..] noticed a potential memory bug and header corruption involving the
SIP NAT helper.
In net/netfilter/nf_nat_sip.c:nf_nat_sip():
if (skb_ensure_writable(skb, skb->len)) {
nf_ct_helper_log(skb, ct, "cannot mangle packet");
return NF_DROP;
}
uh = (void *)skb->data + protoff;
uh->dest = ct_sip_info->forced_dport;
if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff,
0, 0, NULL, 0)) {
If a cloned or fragmented SKB is reallocated by skb_ensure_writable(), the
old data buffer is freed. However, nf_nat_sip() fails to update *dptr to
point to the new buffer.
It also appears to use nf_nat_mangle_udp_packet() on what could be a TCP
packet, which would overwrite the sequence number with a checksum update.
------------------------------------------------------------------------
nf_conntrack_sip linerizes skbs, hence no fragmented skb can be seen.
But clones are possible, so rebuild dptr.
Disable nf_nat_mangle_udp_packet() branch for TCP streams.
It doesn't look like this can ever happen, else we should have received
bug reports about this, so just check the conntrack is UDP and drop
otherwise.
The calling conntrack_sip set ->forced_dport for SIP_HDR_VIA_UDP messages,
so I don't think this is ever expected to be true for a TCP stream. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: access unicast_ttvn skb->data only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
This was done correctly for the ethernet header but missed for the
unicast_packet pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: retrieve ethhdr after potential skb realloc on RX
pskb_may_pull() in batadv_interface_rx() could reallocate the buffer behind
the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
This was done correctly for the VLAN header but missed for the ethernet
header which is later used for the TT and AP isolation handling. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix potential amdxdna_umap lifetime race
amdxdna_umap_release() calls the blocking mmu_interval_notifier_remove()
before removing the object from abo->mem.umap_list. If
aie2_populate_range() runs concurrently, it may obtain a reference to an
amdxdna_umap that is being released, leading to a potential use-after-free.
Use kref_get_unless_zero() in aie2_populate_range() when acquiring a
reference. If the reference count has already dropped to zero, release
is in progress and the entry is skipped. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Validate irqchip index in irqfd routing
Sashiko reported that the irqchip index is not validated for LoongArch.
Add validation and reject out-of-range irqchip indexes to avoid indexing
past the routing table's chip array. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Nullify irqfd->producer if updating IRTE for bypass fails
Nullify irqfd->producer if updating the IRTE for bypass fails, as leaving a
dangling pointer will result in a use-after-free if the irqfd is reachable
through KVM's routing, but the producer is freed separately. E.g. for VFIO
PCI, the producer is embedded in struct "vfio_pci_irq_ctx" and freed when
the vector is disabled, which can happen independent of routing updates.
[sean: drop PPC change, massage changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: pin upper rpc_clnt across the TLS connect_worker
The TLS connect path has a use-after-free: nothing pins the
upper rpc_clnt across the delayed connect_worker. xs_connect()
stores task->tk_client in sock_xprt::clnt as a raw pointer
and queues the worker; for TLS-secured transports that worker
is xs_tcp_tls_setup_socket(), which reads several fields out
of the saved pointer (cl_timeout, cl_program, cl_prog,
cl_vers, cl_cred, cl_stats) to construct the args for the
inner handshake rpc_clnt.
The xprt does not reference the rpc_clnt; the rpc_clnt
references the xprt. xs_destroy() does cancel the
connect_worker, but it runs only when the xprt's refcount
drops to zero, which cannot happen until the rpc_clnt
releases its cl_xprt reference in rpc_free_client_work().
When a TLS handshake fails fatally (for example, an mTLS
mount whose client cert does not match the server), the
connecting task is woken with -EACCES and exits, the mount
caller invokes rpc_shutdown_client(), and the upper rpc_clnt
is freed before the queued connect_worker fires.
xs_tcp_tls_setup_socket() then dereferences the freed clnt,
producing the refcount_t underflow Michael Nemanov reported.
Take a reference on the upper rpc_clnt in xs_connect() for
TLS transports via a new rpc_hold_client() helper, and drop
it in the connect_worker's exit path with rpc_release_client().
The xprt_lock_connect() / xprt_unlock_connect() pairing
already serialises xs_connect() with xs_tcp_tls_setup_socket(),
so the take and release are balanced one-for-one.
The non-TLS connect worker (xs_tcp_setup_socket) never reads
sock_xprt::clnt, so leave that path alone and avoid the
clnt-holds-xprt-holds-clnt cycle that would otherwise prevent
xprt destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: igmp: Fix potential UAF in igmp_gq_start_timer()
A race condition exists between device teardown (inetdev_destroy) and
incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free
in the IGMP timer callback.
During device destruction, inetdev_destroy() drops the primary reference
to in_device, which can drop its refcount to 0. The actual freeing of
in_device memory is deferred via RCU (using call_rcu()).
Concurrently, igmp_rcv() runs under RCU read lock and obtains the
in_device pointer. Because the memory is RCU-protected, CPU-0 can safely
dereference in_device even if its refcount has hit 0.
However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it
attempts to acquire a reference using in_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the in_device memory is still scheduled to be freed after the RCU
grace period (as the free callback does not check the refcount again),
the device is freed while the timer is still armed. When the timer
expires, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not arm the timer.
A similar issue in IPv6 MLD is fixed in a subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
net/liquidio: drop cached VF pci_dev LUT
The PF SR-IOV enable path caches VF pci_dev pointers in
dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those
entries do not own a reference, because the iterator drops the previous
device reference on each step. The cached pointer is then dereferenced
later when handling OCTEON_VF_FLR_REQUEST.
Replace the cached VF mapping with runtime lookup on the mailbox DPI
ring: derive the VF index from q_no, resolve the VF via exported PCI
IOV helpers, validate it with the PF pointer and VF ID, then issue
pcie_flr() and drop the reference with pci_dev_put(). Remove the
unused VF lookup table initialization and cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix VMA access race
aie2_populate_range() and amdxdna_umap_release() access a saved VMA
pointer that may have already been freed, leading to a potential
use-after-free.
Remove the VMA accesses from these functions to avoid the race. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix adv monitor add failure cleanup
hci_add_adv_monitor() publishes a new adv_monitor in
hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT
offload add path can then fail either locally before the controller add
command completes, or in the MSFT add callback. In the current queued
management add flow, hci_cmd_sync_work() still invokes
mgmt_add_adv_patterns_monitor_complete() with the original pending command
after msft_add_monitor_pattern() returns.
The buggy scenario involves two paths, with each column showing the order
within that path:
MSFT add handling MGMT completion
1. insert monitor and handle 1. receive sync error
2. send MSFT add command 2. call add-monitor completion
3. callback sees bad response 3. load cmd->user_data
4. callback frees monitor 4. read monitor->handle
Local MSFT setup failures have the other half of the same ownership bug:
they return an error after the IDR insertion, but no later code removes the
failed monitor from the IDR.
Keep ownership with the pending management command until its completion.
For normal management adds, the MSFT add callback now records successful
controller state and returns errors to its caller. The management
completion frees the monitor on non-success after copying the response
handle, while resume/reregister callback-error cleanup remains in the
MSFT callback. The success path keeps the existing bookkeeping.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x19f/0x330
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
kasan_report+0xe0/0x110
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? 0xffffffffc00d00da
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? hci_cmd_sync_work+0x1ab/0x210 [bluetooth]
hci_cmd_sync_work+0x1c0/0x210 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
process_one_work+0x4fd/0xbc0
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 471 on cpu 3 at 285.205389s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
__sys_sendto+0x2bc/0x2d0
__x64_sys_sendto+0x76/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 454 on cpu 2 at 285.217112s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
msft_add_monitor_sync+0x54a/0x570 [bluetooth]
hci_add_adv_monitor+0x133/0x180 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: avoid untracked enable work
lowpan_enable_set() allocates a temporary work item and schedules
do_enable_set() on system_wq, then returns to debugfs. The debugfs active
operation has ended at that point, but the worker still executes module
text and manipulates enable_6lowpan and listen_chan.
bt_6lowpan_exit() removes the debugfs files and immediately closes and
puts listen_chan. It has no pointer to the queued work item, so it cannot
cancel or flush it before tearing down the state that the worker uses.
The buggy scenario involves two paths, with each column showing the order
within that path:
debugfs enable write module exit
1. lowpan_enable_set() allocates 1. bt_6lowpan_exit() removes
set_enable work the debugfs file
2. schedule_work() queues 2. bt_6lowpan_exit() closes
do_enable_set() and puts listen_chan
3. the write operation returns 3. module teardown can continue
4. do_enable_set() later runs
against stale state
Run the enable state transition synchronously in lowpan_enable_set()
instead. The simple debugfs setter can sleep, and this file already handles
the 6LoWPAN control write synchronously under the same set_lock. Once the
setter returns, debugfs removal covers the whole operation and exit can no
longer race with an untracked work item.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in do_enable_set+0x113/0x2e0
Workqueue: events do_enable_set [bluetooth_6lowpan]
The buggy address belongs to the object at ffff888109cb8000 |
| In the Linux kernel, the following vulnerability has been resolved:
net: microchip: vcap: fix races on the shared Super VCAP block
The VCAP instances on a chip are not independent, yet they are locked
independently. On sparx5 and lan969x the IS0 and IS2 instances are
backed by the same Super VCAP hardware block and share its cache and
command registers: every access drives the shared VCAP_SUPER_CTRL
register and moves data through the shared cache registers.
Accessing one instance therefore races with accessing another. The
per-instance admin->lock cannot prevent this, as each instance takes a
different lock.
The locking issue is mostly disguised by the fact that the core usage of
the vcap api runs under rtnl. However, the full rule dump in debugfs
decodes rules straight from hardware (a READ command followed by a cache
read) and runs outside rtnl, so it races a concurrent tc-flower rule
write to another Super VCAP instance.
Besides corrupting the dump, the read repopulates the shared cache
between the writers cache fill and its write command, so the writer
commits the wrong data and corrupts the hardware entry.
Introduce vcap_lock() and vcap_unlock() helpers and route every rule
lock site in the VCAP API and its debugfs code through them. Replace the
per-instance admin->lock with a single mutex in struct vcap_control that
serializes access to all instances. The helpers reach it through a new
admin->vctrl back-pointer, and the clients initialise and destroy the
control lock instead of a per-instance one.
No path holds more than one instance lock, so collapsing them onto a
single mutex cannot self-deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix HV VHCA stats agent registration race
mlx5e_hv_vhca_stats_create() registers the stats agent through
mlx5_hv_vhca_agent_create(). The helper publishes the agent in
hv_vhca->agents[type] under agents_lock and immediately schedules an
asynchronous control invalidation on the HV VHCA workqueue before
returning to mlx5e.
The asynchronous invalidation invokes the control agent's invalidate
callback, which reads the hypervisor control block and forwards the
command to mlx5e_hv_vhca_stats_control(). That callback may either:
- call cancel_delayed_work_sync(&priv->stats_agent.work), or
- call queue_delayed_work(priv->wq, &sagent->work, sagent->delay).
However, the delayed_work and priv->stats_agent.agent are only
initialized after mlx5_hv_vhca_agent_create() returns to mlx5e:
agent = mlx5_hv_vhca_agent_create(...); /* publish + invalidate */
...
priv->stats_agent.agent = agent; /* too late */
INIT_DELAYED_WORK(&priv->stats_agent.work, ...); /* too late */
If the asynchronous control path runs before the two assignments
above, it can:
- Operate on an uninitialized delayed_work whose timer.function is
NULL. queue_delayed_work() calls add_timer() unconditionally, so
when the timer expires the timer softirq invokes a NULL function
pointer.
- Re-initialize the timer later through INIT_DELAYED_WORK() while
the timer is already enqueued in the timer wheel, corrupting the
hlist (entry.pprev cleared while the previous bucket node still
points at this entry).
- When the worker eventually runs, mlx5e_hv_vhca_stats_work() reads
sagent->agent (NULL) and dereferences it inside
mlx5_hv_vhca_agent_write().
Fix this by:
- Initializing priv->stats_agent.work before invoking
mlx5_hv_vhca_agent_create(), so the work is always in a valid
state when the control callback observes it.
- Adding a struct mlx5_hv_vhca_agent **ctx_update out-parameter
to mlx5_hv_vhca_agent_create(). The helper writes the agent
pointer to *ctx_update before publishing into hv_vhca->agents[]
and triggering the agents_update flow, so any callback
subsequently invoked from that flow already sees a valid
priv->stats_agent.agent. This avoids having the control
callback participate in agent initialization.
While at it, access priv->stats_agent.agent with
READ_ONCE()/WRITE_ONCE() for the cross-CPU access with the worker, and
clear priv->stats_agent.buf on the agent_create() failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid stale runlist element dereference in fallocate
ntfs_attr_fallocate() allocates holes and delayed allocations inside
initialized size by looking up the current runlist element under
ni->runlist.lock. The returned struct runlist_element is only a borrowed
pointer into ni->runlist.rl. A writer can replace and free that array
after the read lock is dropped, so later reads of rl->lcn, rl->length and
rl->vcn can touch freed memory.
The buggy scenario involves two paths, with each column showing the order
within that path:
ntfs_attr_fallocate():
1. Take ni->runlist.lock for read.
2. Get rl from ntfs_attr_find_vcn_nolock().
3. Drop ni->runlist.lock.
4. Read rl->lcn, rl->length and rl->vcn.
mmap page_mkwrite:
1. Enter ntfs_filemap_page_mkwrite().
2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster().
3. Merge allocation state with ntfs_runlists_merge().
4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? ntfs_attr_fallocate+0xbb8/0xd00
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x20d/0x410
? ntfs_attr_fallocate+0xbb8/0xd00
kasan_report+0xe0/0x110
? ntfs_attr_fallocate+0xbb8/0xd00
ntfs_attr_fallocate+0xbb8/0xd00
? lock_acquire+0x2b8/0x2f0
? __pfx_ntfs_attr_fallocate+0x10/0x10
? 0xffffffffc0000095
? down_write+0x10d/0x1e0
ntfs_fallocate+0x5c9/0x1d00
? __pfx_ntfs_fallocate+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x2b8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? selinux_file_permission+0x3a7/0x510
vfs_fallocate+0x29d/0xd30
__x64_sys_fallocate+0xc7/0x150
? do_syscall_64+0x81/0x6a0
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task 410:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kvmalloc_node_noprof+0x353/0x920
ntfs_rl_realloc+0x3f/0x110
ntfs_runlists_merge+0xaa3/0x3010
ntfs_attr_map_cluster+0x4e5/0xf80
ntfs_attr_fallocate+0x53f/0xd00
ntfs_fallocate+0x5c9/0x1d00
vfs_fallocate+0x29d/0xd30
__x64_sys_fallocate+0xc7/0x150
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 424:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x307/0x580
ntfs_rl_realloc+0x6f/0x110
ntfs_runlists_merge+0x7b1/0x3010
ntfs_attr_map_cluster+0x4e5/0xf80
__ntfs_write_iomap_begin+0x8cd/0x2280
iomap_iter+0x6de/0x11e0
iomap_page_mkwrite+0x391/0x650
ntfs_filemap_page_mkwrite+0x1ac/0x400
do_page_mkwrite+0x15c/0x280
__handle_mm_fault+0xd6d/0x1ca0
handle_mm_fault+0x19c/0x470
do_user_addr_fault+0x23b/0x9c0
exc_page_fault+0x5c/0xc0
asm_exc_page_fault+0x26/0x30
Fix this by copying the needed runlist fields while the read lock is still
held and using only those scalar snapshots after unlocking.
After the snapshot, ntfs_attr_map_cluster() can also find that the range
is already mapped and return balloc=false. Only call ntfs_dio_zero_range()
when new clusters were allocated, matching the write iomap path and
preserving the zero-newly-allocated-holes behavior. |
