| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. Filesystem bugs due to corrupt images are not considered a CVE for any filesystem that is only mountable by CAP_SYS_ADMIN in the initial user namespace. That includes delegated mounting. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, in the ESP-IDF Bluetooth host stack (BlueDroid), the function bta_dm_sdp_result() used a fixed-size array uuid_list[32][MAX_UUID_SIZE] to store discovered service UUIDs during the SDP (Service Discovery Protocol) process. On modern Bluetooth devices, it is possible for the number of available services to exceed this fixed limit (32). In such cases, if more than 32 services are discovered, subsequent writes to uuid_list could exceed the bounds of the array, resulting in a potential out-of-bounds write condition. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, in the avrc_vendor_msg() function of the ESP-IDF BlueDroid AVRCP stack, the allocated buffer size was validated using AVRC_MIN_CMD_LEN (20 bytes). However, the actual fixed header data written before the vendor payload exceeds this value. This totals 29 bytes written before p_msg->p_vendor_data is copied. Using the old AVRC_MIN_CMD_LEN could allow an out-of-bounds write if vendor_len approaches the buffer limit. For commands where vendor_len is large, the original buffer allocation may be insufficient, causing writes beyond the allocated memory. This can lead to memory corruption, crashes, or other undefined behavior. The overflow could be larger when assertions are disabled. |
| A maliciously crafted CATPRODUCT file, when parsed in CC5Dll.dll through Autodesk applications, can lead to a memory corruption vulnerability by write access violation. This vulnerability, in conjunction with other vulnerabilities, can lead to code execution in the context of the current process. |
| A maliciously crafted X_B file, when parsed in pskernel.DLL through Autodesk applications, can lead to a memory corruption vulnerability by write access violation. This vulnerability, in conjunction with other vulnerabilities, can lead to code execution in the context of the current process. |
| A maliciously crafted SLDASM or SLDPRT file, when parsed in ODXSW_DLL.dll through Autodesk applications, can lead to a memory corruption vulnerability by write access violation. This vulnerability, along with other vulnerabilities, can lead to code execution in the current process. |
| A maliciously crafted 3DM file, when parsed in opennurbs.dll and ASMkern229A.dll through Autodesk applications, can lead to a memory corruption vulnerability by write access violation. This vulnerability, along with other vulnerabilities, can lead to code execution in the current process. |
| A maliciously crafted CATPRODUCT file, when parsed in CC5Dll.dll through Autodesk applications, can lead to a memory corruption vulnerability by write access violation. This vulnerability, in conjunction with other vulnerabilities, can lead to code execution in the context of the current process. |
| A maliciously crafted CATPART, X_B and STEP, when parsed in ASMKERN228A.dll and ASMKERN229A.dll through Autodesk applications, can lead to a memory corruption vulnerability by write access violation. This vulnerability, in conjunction with other vulnerabilities, can lead to code execution in the context of the current process. |
| A maliciously crafted DWFX file, when parsed through Autodesk Navisworks, can force a Memory Corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A vulnerability was found in perl 5.30.0 through 5.38.0. This issue occurs when a crafted regular expression is compiled by perl, which can allow an attacker controlled byte buffer overflow in a heap allocated buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/hdmi: fix memory corruption with too many bridges
Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.
Patchwork: https://patchwork.freedesktop.org/patch/502670/ |
| Soda PDF Desktop PDF File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Soda PDF Desktop. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of PDF files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27120. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Avoid field-overflowing memcpy()
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use flexible arrays instead of zero-element arrays (which look like they
are always overflowing) and split the cross-field memcpy() into two halves
that can be appropriately bounds-checked by the compiler.
We were doing:
#define ETH_HLEN 14
#define VLAN_HLEN 4
...
#define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN)
...
struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi);
...
struct mlx5_wqe_eth_seg *eseg = &wqe->eth;
struct mlx5_wqe_data_seg *dseg = wqe->data;
...
memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE);
target is wqe->eth.inline_hdr.start (which the compiler sees as being
2 bytes in size), but copying 18, intending to write across start
(really vlan_tci, 2 bytes). The remaining 16 bytes get written into
wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr
(8 bytes).
struct mlx5e_tx_wqe {
struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */
struct mlx5_wqe_eth_seg eth; /* 16 16 */
struct mlx5_wqe_data_seg data[]; /* 32 0 */
/* size: 32, cachelines: 1, members: 3 */
/* last cacheline: 32 bytes */
};
struct mlx5_wqe_eth_seg {
u8 swp_outer_l4_offset; /* 0 1 */
u8 swp_outer_l3_offset; /* 1 1 */
u8 swp_inner_l4_offset; /* 2 1 */
u8 swp_inner_l3_offset; /* 3 1 */
u8 cs_flags; /* 4 1 */
u8 swp_flags; /* 5 1 */
__be16 mss; /* 6 2 */
__be32 flow_table_metadata; /* 8 4 */
union {
struct {
__be16 sz; /* 12 2 */
u8 start[2]; /* 14 2 */
} inline_hdr; /* 12 4 */
struct {
__be16 type; /* 12 2 */
__be16 vlan_tci; /* 14 2 */
} insert; /* 12 4 */
__be32 trailer; /* 12 4 */
}; /* 12 4 */
/* size: 16, cachelines: 1, members: 9 */
/* last cacheline: 16 bytes */
};
struct mlx5_wqe_data_seg {
__be32 byte_count; /* 0 4 */
__be32 lkey; /* 4 4 */
__be64 addr; /* 8 8 */
/* size: 16, cachelines: 1, members: 3 */
/* last cacheline: 16 bytes */
};
So, split the memcpy() so the compiler can reason about the buffer
sizes.
"pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe
nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object
code changes (i.e. only source line number induced differences and
optimizations). |
| An out-of-bounds write vulnerability exists in the Grassroots DICOM library (GDCM). The issue is triggered during parsing of a malformed DICOM file containing encapsulated PixelData fragments (compressed image data stored as multiple fragments). This vulnerability leads to a segmentation fault caused by an out-of-bounds memory access due to unsigned integer underflow in buffer indexing. It is exploitable via file input, simply opening a crafted malicious DICOM file is sufficient to trigger the crash, resulting in a denial-of-service condition. |
| cups-filters contains backends, filters, and other software required to get the cups printing service working on operating systems other than macos. In cups-filters prior to 1.28.18, by crafting a PDF file with a large `MediaBox` value, an attacker can cause CUPS-Filter 1.x’s `pdftoraster` tool to write beyond the bounds of an array. First, a PDF with a large `MediaBox` width value causes `header.cupsWidth` to become large. Next, the calculation of `bytesPerLine = (header.cupsBitsPerPixel * header.cupsWidth + 7) / 8` overflows, resulting in a small value. Then, `lineBuf` is allocated with the small `bytesPerLine` size. Finally, `convertLineChunked` calls `writePixel8`, which attempts to write to `lineBuf` outside of its buffer size (out of bounds write). In libcupsfilters, the maintainers found the same `bytesPerLine` multiplication without overflow check, but the provided test case does not cause an overflow there, because the values are different. Commit 50d94ca0f2fa6177613c97c59791bde568631865 contains a patch, which is incorporated into cups-filters version 1.28.18. |
| CUPS is a standards-based, open-source printing system, and `libcupsfilters` contains the code of the filters of the former `cups-filters` package as library functions to be used for the data format conversion tasks needed in Printer Applications. In CUPS-Filters versions up to and including 1.28.17 and libscupsfilters versions 2.0.0 through 2.1.1, CUPS-Filters's `imagetoraster` filter has an out of bounds read/write vulnerability in the processing of TIFF image files. While the pixel buffer is allocated with the number of pixels times a pre-calculated bytes-per-pixel value, the function which processes these pixels is called with a size of the number of pixels times 3. When suitable inputs are passed, the bytes-per-pixel value can be set to 1 and bytes outside of the buffer bounds get processed. In order to trigger the bug, an attacker must issue a print job with a crafted TIFF file, and pass appropriate print job options to control the bytes-per-pixel value of the output format. They must choose a printer configuration under which the `imagetoraster` filter or its C-function equivalent `cfFilterImageToRaster()` gets invoked. The vulnerability exists in both CUPS-Filters 1.x and the successor library libcupsfilters (CUPS-Filters 2.x). In CUPS-Filters 2.x, the vulnerable function is `_cfImageReadTIFF() in libcupsfilters`. When this function is invoked as part of `cfFilterImageToRaster()`, the caller passes a look-up-table during whose processing the out of bounds memory access happens. In CUPS-Filters 1.x, the equivalent functions are all found in the cups-filters repository, which is not split into subprojects yet, and the vulnerable code is in `_cupsImageReadTIFF()`, which is called through `cupsImageOpen()` from the `imagetoraster` tool. A patch is available in commit b69dfacec7f176281782e2f7ac44f04bf9633cfa. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix buffer free/clear order in deferred receive path
Fix a use-after-free window by correcting the buffer release sequence in
the deferred receive path. The code freed the RQ buffer first and only
then cleared the context pointer under the lock. Concurrent paths (e.g.,
ABTS and the repost path) also inspect and release the same pointer under
the lock, so the old order could lead to double-free/UAF.
Note that the repost path already uses the correct pattern: detach the
pointer under the lock, then free it after dropping the lock. The
deferred path should do the same. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
If the ssid->datalen is more than IEEE80211_MAX_SSID_LEN (32) it would
lead to memory corruption so add some bounds checking. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Apply the link chain quirk on NEC isoc endpoints
Two clearly different specimens of NEC uPD720200 (one with start/stop
bug, one without) were seen to cause IOMMU faults after some Missed
Service Errors. Faulting address is immediately after a transfer ring
segment and patched dynamic debug messages revealed that the MSE was
received when waiting for a TD near the end of that segment:
[ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0
[ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000]
[ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000]
It gets even funnier if the next page is a ring segment accessible to
the HC. Below, it reports MSE in segment at ff1e8000, plows through a
zero-filled page at ff1e9000 and starts reporting events for TRBs in
page at ff1ea000 every microframe, instead of jumping to seg ff1e6000.
[ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag.
[ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
At some point completion events change from Isoch Buffer Overrun to
Short Packet and the HC finally finds cycle bit mismatch in ff1ec000.
[ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2
It's possible that data from the isochronous device were written to
random buffers of pending TDs on other endpoints (either IN or OUT),
other devices or even other HCs in the same IOMMU domain.
Lastly, an error from a different USB device on another HC. Was it
caused by the above? I don't know, but it may have been. The disk
was working without any other issues and generated PCIe traffic to
starve the NEC of upstream BW and trigger those MSEs. The two HCs
shared one x1 slot by means of a commercial "PCIe splitter" board.
[ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd
[ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
[ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00
[ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
Fortunately, it appears that this ridiculous bug is avoided by setting
the chain bit of Link TRBs on isochronous rings. Other ancient HCs are
known which also expect the bit to be set and they ignore Link TRBs if
it's not. Reportedly, 0.95 spec guaranteed that the bit is set.
The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports
tens of MSEs per second and runs into the bug within seconds. Chaining
Link TRBs allows the same workload to run for many minutes, many times.
No ne
---truncated--- |
