| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event()
Sashiko points out the radix_tree itself is RCU safe, but nothing ever
frees the mlx4_srq struct with RCU, and it isn't even accessed within the
RCU critical section. It also will crash if an event is delivered before
the srq object is finished initializing.
Use the spinlock since it isn't easy to make RCU work, use
refcount_inc_not_zero() to protect against partially initialized objects,
and order the refcount_set() to be after the srq is fully initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq()
Sashiko points out that mlx4_srq_alloc() was not undone during error
unwind, add the missing call to mlx4_srq_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Add limits to event and receive message requests
The driver would just fetch events and receive messages until the
BMC said it was done. To avoid issues with BMCs that never say they are
done, add a limit of 10 fetches at a time.
In addition, an si interface has an attn state it can return from the
hardware which is supposed to cause a flag fetch to see if the driver
needs to fetch events or message or a few other things. If the attn
bit gets stuck, it's a similar problem. So allow messages in between
flag fetches so the driver itself doesn't get stuck.
This is a more general fix than the previous fix for the specific bad
BMC, but should fix the more general issue of a BMC that won't stop
saying it has data.
This has been there from the beginning of the driver. It's not a bug
per-se, but it is accounting for bugs in BMCs. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init()
mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When
ib_create_srq() fails for s1, the error branch destroys s0 but falls
through and unconditionally assigns the freed s0 and the ERR_PTR s1 to
devr->s0 and devr->s1.
This leads to several problems: the lock-free fast path checks
"if (devr->s1) return 0;" and treats the ERR_PTR as already initialised;
users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via
to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences
the ERR_PTR and double-frees s0 on teardown.
Fix by adding the same `goto unlock` in the s1 failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix fsck inconsistency caused by FGGC of node block
During FGGC node block migration, fsck may incorrectly treat the
migrated node block as fsync-written data.
The reproduction scenario:
root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync
root@vm:/mnt/f2fs# rm -f 1
root@vm:/mnt/f2fs# sync
root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The root cause is that GC does not clear the dentry mark and fsync mark
during node block migration, leading fsck to misinterpret them as
user-issued fsync writes.
In BGGC mode, node block migration is handled by f2fs_sync_node_pages(),
which guarantees the dentry and fsync marks are cleared before writing.
This patch move the set/clear of the fsync|dentry marks into
__write_node_folio to make the logic clearer, and ensures the
fsync|dentry mark is cleared in FGGC. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache
Make sure resources are not improperly shared in the op cache and
cause instruction corruption this way. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: prevent preemption of oopsing TASK_DEAD task
When an already-exiting task oopses, make_task_dead() currently calls
do_task_dead() with preemption enabled. That is forbidden:
do_task_dead() calls __schedule(), which has a comment saying "WARNING:
must be called with preemption disabled!".
If an oopsing task is preempted in do_task_dead(), between becoming
TASK_DEAD and entering the scheduler explicitly, bad things happen:
finish_task_switch() assumes that once the scheduler has switched away
from a TASK_DEAD task, the task can never run again and its stack is no
longer needed; but that assumption apparently doesn't hold if the dead
task was preempted (the SM_PREEMPT case).
This means that the scheduler ends up repeatedly dropping references on
the dead task's stack, which can lead to use-after-free or double-free
of the entire task stack; in other words, two tasks can end up running
on the same stack, resulting in various kinds of memory corruption.
(This does not just affect "recursively oopsing" tasks; it is enough to
oops once during task exit, for example in a file_operations::release
handler) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: use safe list iteration in radar detect work
The call to ieee80211_dfs_cac_cancel can cause the iterated chanctx to
be freed and removed from the list. Guard against this to avoid a
slab-use-after-free error. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix double free in create_space_info_sub_group() error path
When kobject_init_and_add() fails, the call chain is:
create_space_info_sub_group()
-> btrfs_sysfs_add_space_info_type()
-> kobject_init_and_add()
-> failure
-> kobject_put(&sub_group->kobj)
-> space_info_release()
-> kfree(sub_group)
Then control returns to create_space_info_sub_group(), where:
btrfs_sysfs_add_space_info_type() returns error
-> kfree(sub_group)
Thus, sub_group is freed twice.
Keep parent->sub_group[index] = NULL for the failure path, but after
btrfs_sysfs_add_space_info_type() has called kobject_put(), let the
kobject release callback handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: oss: Fix data race at accessing runtime.oss.trigger
Currently the runtime.oss.trigger field may be accessed concurrently
without protection, which may lead to the data race. And, in this
case, it may lead to more severe problem because it's a bit field; as
writing the data, it may overwrite other bit fields as well, which
confuses the operation completely, as spotted by fuzzing.
Fix it by covering runtime.oss.trigger bit fled also with the existing
params_lock mutex in both snd_pcm_oss_get_trigger() and
snd_pcm_oss_poll(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix out-of-bounds read in smb2_compound_op()
If a server sends a truncated response but a large OutputBufferLength, and
terminates the EA list early, check_wsl_eas() returns success without
validating that the entire OutputBufferLength fits within iov_len.
Then smb2_compound_op() does:
memcpy(idata->wsl.eas, data[0], size[0]);
Where size[0] is OutputBufferLength. If iov_len is smaller than size[0],
memcpy can read beyond the end of the rsp_iov allocation and leak adjacent
kernel heap memory. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: drop stray 'static' from fast-RX rx_result
ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but
its per-invocation rx_result is declared static. Concurrent callers then
share one instance and can overwrite each other's result between
ieee80211_rx_mesh_data() and the switch on res.
That can make a packet that was queued or consumed by
ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make
a packet that should continue return as queued.
Make res an automatic variable so each invocation keeps its own result. |
| In the Linux kernel, the following vulnerability has been resolved:
fanotify: fix false positive on permission events
fsnotify_get_mark_safe() may return false for a mark on an unrelated group,
which results in bypassing the permission check.
Fix by skipping over detached marks that are not in the current group. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()
target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a
256-byte stack buffer, then will memcpy() cur_len bytes from that
buffer. snprintf() returns the length the output would have had, which
can exceed the buffer size when the fabric WWN is long because iSCSI IQN
names can be up to 223 bytes. The check at the memcpy() site only
guards the destination page write, not the source read, so memcpy() will
read past the stack buffer and copy adjacent stack contents to the sysfs
reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic()
will be triggered.
Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length
check to avoid buffer overflow") added the same bound to the
target_lu_gp_members_show() but the tg_pt_gp variant was missed so
resolve that here. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Validate rx_hash_key_len
Sashiko points out that rx_hash_key_len comes from a uAPI structure and is
blindly passed to memcpy, allowing the userspace to trash kernel
memory. Bounds check it so the memcpy cannot overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt
hci_le_create_big_complete_evt() iterates over BT_BOUND connections for
a BIG handle using a while loop, accessing ev->bis_handle[i++] on each
iteration. However, there is no check that i stays within ev->num_bis
before the array access.
When a controller sends a LE_Create_BIG_Complete event with fewer
bis_handle entries than there are BT_BOUND connections for that BIG,
or with num_bis=0, the loop reads beyond the valid bis_handle[] flex
array into adjacent heap memory. Since the out-of-bounds values
typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle()
rejects them and the connection remains in BT_BOUND state. The same
connection is then found again by hci_conn_hash_lookup_big_state(),
creating an infinite loop with hci_dev_lock held.
Fix this by terminating the BIG if in case not all BIS could be setup
properly. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: ADD_ADDR rtx: fix potential data-race
This mptcp_pm_add_timer() helper is executed as a timer callback in
softirq context. To avoid any data races, the socket lock needs to be
held with bh_lock_sock().
If the socket is in use, retry again soon after, similar to what is done
with the keepalive timer. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix race between ICReq handling and queue teardown
nvmet_tcp_handle_icreq() updates queue->state after sending an
Initialization Connection Response (ICResp), but it does so without
serializing against target-side queue teardown.
If an NVMe/TCP host sends an Initialization Connection Request
(ICReq) and immediately closes the connection, target-side teardown
may start in softirq context before io_work drains the already
buffered ICReq. In that case, nvmet_tcp_schedule_release_queue()
sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue
reference under state_lock.
If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can
still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the
DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and
allows a later socket state change to re-enter teardown and issue a
second kref_put() on an already released queue.
The ICResp send failure path has the same problem. If teardown has
already moved the queue to DISCONNECTING, a send error can still
overwrite the state with NVMET_TCP_Q_FAILED, again reopening the
window for a second teardown path to drop the queue reference.
Fix this by serializing both post-send state transitions with
state_lock and bailing out if teardown has already started.
Use -ESHUTDOWN as an internal sentinel for that bail-out path rather
than propagating it as a transport error like -ECONNRESET. Keep
nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before
honoring that sentinel so receive-side parsing stays quiesced until the
existing release path completes. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject unknown opcodes before ICRC processing
Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC
before payload_size() in rxe_rcv"), a single unauthenticated UDP packet
can still trigger panic. That patch handled payload_size() underflow only
for valid opcodes with short packets, not for packets carrying an unknown
opcode. The unknown-opcode OOB read described below predates that commit
and reaches back to the initial Soft RoCE driver.
The check added there reads
pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE
where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The
rxe_opcode[] array has 256 entries but is only populated for defined IB
opcodes; any other entry (for example opcode 0xff) is zero-initialized, so
length == 0 and the check degenerates to
pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE
which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes
rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES
which underflows when length == 0 and passes a huge value to rxe_crc32(),
causing an out-of-bounds read of the skb payload.
Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with
CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after
rdma link add rxe0 type rxe netdev eth0
A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and
QPN=IB_MULTICAST_QPN triggers:
BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170
Read of size 1 at addr ...
The buggy address is located 0 bytes to the right of
allocated 704-byte region
Call Trace:
crc32_le+0x115/0x170
rxe_icrc_hdr.isra.0+0x226/0x300
rxe_icrc_check+0x13f/0x3a0
rxe_rcv+0x6e1/0x16e0
rxe_udp_encap_recv+0x20a/0x320
udp_queue_rcv_one_skb+0x7ed/0x12c0
Subsequent packets with the same shape fault on unmapped memory and panic
the kernel. The trigger requires only module load and "rdma link add"; no
QP, no connection, and no authentication.
Fix this by rejecting packets whose opcode has no rxe_opcode[] entry,
detected via the zero mask or zero length, before any length arithmetic
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix double free in create_space_info() error path
When kobject_init_and_add() fails, the call chain is:
create_space_info()
-> btrfs_sysfs_add_space_info_type()
-> kobject_init_and_add()
-> failure
-> kobject_put(&space_info->kobj)
-> space_info_release()
-> kfree(space_info)
Then control returns to create_space_info():
btrfs_sysfs_add_space_info_type() returns error
-> goto out_free
-> kfree(space_info)
This causes a double free.
Keep the direct kfree(space_info) for the earlier failure path, but
after btrfs_sysfs_add_space_info_type() has called kobject_put(), let
the kobject release callback handle the cleanup. |
