Export limit exceeded: 370459 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370459 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63979 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: hand off the pinned file reference to accept_doit handshake_req_next() removes the request from the per-net pending list and drops hn_lock before handshake_nl_accept_doit() reads req->hr_sk->sk_socket and dereferences sock->file (once in FD_PREPARE() and again in get_file()). In that window a consumer running tls_handshake_cancel() followed by sockfd_put() (svc_sock_free) or __fput_sync() (xs_reset_transport) releases sock->file. sock_release() then runs sock_orphan(), zeroing sk_socket, and frees the struct socket. The accept-side code either reads NULL through sk_socket or chases freed memory. The submit-side sock_hold() does not prevent this. sk_refcnt protects struct sock, but struct socket and sock->file are independently refcounted via the file descriptor the consumer owns. Pinning sk leaves sock and sock->file unprotected. Retarget the accept-side dereferences at req->hr_file, which was pinned at submit time, instead of req->hr_sk->sk_socket->file. Pinning on its own is not sufficient: a consumer that cancels between handshake_req_next() returning and accept_doit reaching FD_PREPARE() takes the !remove_pending() branch in handshake_req_cancel() and drops hr_file before the accept side takes its own reference. Hand off an additional file reference inside handshake_req_next(), under hn_lock, so the accept side operates on a reference that no concurrent handshake_req_cancel() can revoke. FD_PREPARE() consumes that handed-off reference, either by transferring it to the new fd in fd_publish() or by dropping it in the cleanup destructor on error; the explicit get_file() that previously balanced FD_PREPARE() is therefore redundant and goes away. Update handshake_req_cancel_test2 and _test3 to simulate the FD_PREPARE() consumption with an fput() so the kunit file-count assertions stay balanced. | ||||
| CVE-2026-64029 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Serialize UMP output teardown with event_input seq_ump_process_event() borrows client->out_rfile.output without synchronizing with the first-open and last-close transition in seq_ump_client_open() and seq_ump_client_close(). The last output unuse can therefore drop opened[STR_OUT] to zero and release the rawmidi file while an in-flight event_input callback is still inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream runtime exposed to teardown before the write path has taken its own buffer reference. Add a per-client rwlock for the event_input-visible output file. Publish a newly opened output file under the write side, and hold the read side from the output lookup through snd_rawmidi_kernel_write(). The last output close copies and clears the visible output file under the write side, then drops the lock and releases the saved rawmidi file. Use IRQ-safe rwlock guards because event_input can also be reached from atomic sequencer delivery. The buggy scenario involves two paths, with each column showing the order within that path: path A label: event_input path path B label: last unuse path 1. seq_ump_process_event() reads 1. seq_ump_client_close() client->out_rfile.output. drops opened[STR_OUT] to zero. 2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release() has not yet pinned runtime. closes the output file. 3. The writer continues using 3. close_substream() frees the borrowed substream. substream->runtime. This keeps the output substream and runtime alive for the full event_input write while keeping rawmidi release outside the rwlock. KASAN reproduced this as a slab-use-after-free in snd_rawmidi_kernel_write1(), with allocation through seq_ump_use()/snd_seq_port_connect() and free through seq_ump_unuse()/snd_seq_port_disconnect(). Validation reproduced this kernel report: KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400 RIP: 0033:0x7f5528af837f Read of size 8 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_rawmidi_kernel_write1+0x9d/0x400 (?:?) __asan_load8+0x82/0xb0 (?:?) update_stack_state+0x1ef/0x2d0 (?:?) snd_rawmidi_kernel_write+0x1a/0x20 (?:?) seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82) __snd_seq_deliver_single_event+0x8a/0xe0 (?:?) snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?) lock_acquire+0x14e/0x2e0 (?:?) find_held_lock+0x31/0x90 (?:?) snd_seq_port_use_ptr+0xa6/0xe0 (?:?) __kasan_check_write+0x18/0x20 (?:?) do_raw_read_unlock+0x32/0xa0 (?:?) _raw_read_unlock+0x26/0x50 (?:?) snd_seq_deliver_single_event+0x45c/0x4b0 (?:?) snd_seq_deliver_event+0x10d/0x1b0 (?:?) snd_seq_client_enqueue_event+0x192/0x240 (?:?) snd_seq_write+0x2cd/0x450 (?:?) apparmor_file_permission+0x20/0x30 (?:?) security_file_permission+0x51/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) __fget_files+0x12b/0x220 (?:?) lock_release+0xc8/0x2a0 (?:?) __rcu_read_unlock+0x74/0x2d0 (?:?) __fget_files+0x135/0x220 (?:?) ksys_write+0x15a/0x180 (?:?) rcu_is_watching+0x24/0x60 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-55833 | 1 Netty | 1 Netty | 2026-07-22 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to 4.1.136.Final and 4.2.16.Final, Netty SPDY header decoding continues inflating zlib-compressed header blocks after the raw header parser has exceeded `maxHeaderSize` and marked the frame truncated in `SpdyFrameCodec`, allowing a remote peer to send a small compressed `HEADERS` block that expands into much larger raw header data and causes compression-amplified CPU and allocation churn. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. | ||||
| CVE-2026-64609 | 1 Apache | 1 Fory | 2026-07-22 | 9.1 Critical |
| Out-of-bounds read via sun.misc.Unsafe in Apache Fory. When out-of-band zero-copy deserialization is used, readAlignedVarUint() can read beyond the bounds of the underlying buffer. Out-of-band zero-copy deserialization is an opt-in feature; applications that do not use it are not affected. This issue affects Apache Fory (formerly Apache Fury): from 0.5.0 before 1.4.0. Versions before 0.11.0 were published under the Maven coordinates org.apache.fury:fury-core. Users are recommended to upgrade to version 1.4.0, which fixes the issue. | ||||
| CVE-2026-63861 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: mtk-snfi: unregister ECC engine on probe failure and remove() callback mtk_snand_probe() registers the on-host NAND ECC engine, but teardown was missing from both probe unwind and remove-time cleanup. Add a devm cleanup action after successful registration so nand_ecc_unregister_on_host_hw_engine() runs automatically on probe failures and during device removal. | ||||
| CVE-2026-63864 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Propagate error from visit_tailcall_insn Commit e40f5a6bf88a ("bpf: correct stack liveness for tail calls") added visit_tailcall_insn() but did not check its return value. | ||||
| CVE-2026-16566 | 2026-07-22 | 6.1 Medium | ||
| A flaw was found in the community.general Ansible collection's jenkins_credential module. When creating a Jenkins API token (credential_type: token), the module correctly protects the input password with no_log=True in the argument specification, but places the generated API token returned by the Jenkins API directly into the Ansible task result dictionary without output suppression. The token is emitted in plaintext via exit_json(), causing it to appear in Ansible task output, AWX/Tower/AAP Controller job logs, callback plugin output, CI/CD pipeline logs, and fact caching backends. An attacker with access to any of these output channels can obtain the Jenkins API token and gain the same privileges as the user who created it. | ||||
| CVE-2026-63882 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL pointer bug in svm_range_set_attr The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm before calling kfd_ioctl_svm. (cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4) | ||||
| CVE-2026-63891 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Cap recursion depth in __tb_property_parse_dir() A DIRECTORY entry's value field is used as the dir_offset for a recursive call into __tb_property_parse_dir() with no depth counter. A crafted peer that chains DIRECTORY entries into a back-reference loop drives the parser until the kernel stack is exhausted and the guard page fires. Any untrusted XDomain peer (cable, dock, in-line inspector, adjacent host) that reaches the PROPERTIES_REQUEST control-plane exchange can trigger this without authentication. Thread a depth counter through tb_property_parse() and __tb_property_parse_dir(), and reject blocks that exceed TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any observed legitimate XDomain layout. Operators who do not need XDomain host-to-host discovery can disable the path entirely with thunderbolt.xdomain=0 on the kernel command line. | ||||
| CVE-2026-63902 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: validate interrupt packet headers cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the interrupt URB is resubmitted through the existing retry path, preventing out-of-bounds header-byte reads. KASAN report as below: KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0 Read of size 1 Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer() [ johan: use constants in header length sanity checks ] | ||||
| CVE-2026-63904 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: check URB actual_length for interrupt-IN notifications USBTMC devices can use an optional interrupt endpoint for notification messages. These typically contain two-byte headers indicating the payload format, but the driver does not check if these headers are present before accessing the data buffers. In cases where the URB actual_length is not enough to fit these headers, the driver will either cause an out-of-bounds read, or consume stale leftover data from a previous notification. Fix by checking if actual_data contains enough bytes for the headers, otherwise resubmit URB to the interrupt endpoint. | ||||
| CVE-2026-47133 | 1 Craigjbass | 1 Clearancekit | 2026-07-21 | N/A |
| ClearanceKit intercepts file-system access events on macOS and enforces per-process access policies. Prior to version 5.0.10, each table in the on-disk SQLite policy store (`/Library/Application Support/clearancekit/store.db`) is verified using an ECDSA signature stored in the `data_signatures` table. The signed payload contains only the canonical row content, with no version counter or freshness binding. An attacker who can write `store.db` and the matching `data_signatures` row — feasible during the opfilter-update window when the Endpoint Security filter is offline, or via offline-boot / decrypted-backup scenarios — can substitute a previously-captured legitimately-signed snapshot. opfilter accepts the older snapshot as fully valid on next boot because the existing signatures still verify. Version 5.0.10 patches the issue. | ||||
| CVE-2026-47134 | 1 Craigjbass | 1 Clearancekit | 2026-07-21 | N/A |
| ClearanceKit intercepts file-system access events on macOS and enforces per-process access policies. The ECDSA private key used to sign the on-disk policy database (`/Library/Application Support/clearancekit/store.db`) is stored in the macOS System Keychain. The key was created via the two-step pattern `SecKeyCreateRandomKey` (in-memory) followed by `SecItemAdd(kSecValueRef:, kSecAttrAccess:)` (persist). Prior to version 5.0.10, for `kSecClassKey` items in the legacy System Keychain, `kSecAttrAccess` passed to `SecItemAdd` is silently ignored — the persisted key inherits no ACL restriction. The same access builder applied to `kSecClassGenericPassword` items correctly binds the ACL, making this bug specific to the EC key. The result is that any process running as root can use the key to produce valid signatures over arbitrary policy content. Version 5.0.10 fixes the issue. No known workarounds are available. Disabling the system extension and manually removing the System Keychain item labelled `clearancekit policy signing key` would prevent the forged-signature path but also disables policy enforcement. | ||||
| CVE-2026-63909 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops Commit d07b26f39246 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()") introduced a transposed bounds check: if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE) Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates to `aces_size < 0`. Because `aces_size` is always non-negative, this check becomes dead code and never breaks the loop. Worse, that commit removed the old 4-byte guard, meaning the loop now reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation during subsequent SMB2_CREATE operations. Fix this by properly transposing the comparison to require at least 16 bytes (8-byte offset + 8-byte SID base), matching the correct form used in smb_inherit_dacl(). | ||||
| CVE-2026-63927 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: Fix use after free in debug code We're not allowed to dereference "urb" after calling usb_hcd_giveback_urb() so save the urb->status ahead of time. | ||||
| CVE-2026-63931 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: scd30: fix division by zero in write_raw Add a zero check for val2 before using it as a divisor when setting the sampling frequency. A user writing a zero fractional part to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. | ||||
| CVE-2026-64606 | 1 Apache | 1 Fory | 2026-07-21 | 9.8 Critical |
| Deserialization of untrusted data vulnerability that may allow class-registration checks to be bypassed during Java lambda deserialization. Only lambda capture class is affected This issue affects Apache Fory: from before 1.4.0. Users are recommended to upgrade to version 1.4.0, which fixes the issue. | ||||
| CVE-2026-64627 | 1 Parse Community | 1 Parse Server | 2026-07-21 | N/A |
| Parse Server versions >= 9.0.0 before 9.10.0-alpha.4 and versions before 8.6.85 contain a schema disclosure vulnerability. When the GraphQL API is mounted with public introspection disabled (graphQLPublicIntrospection: false, the default), schema-derived 'Did you mean ...?' suggestions were still returned in GraphQL error messages produced during variable coercion, which were not covered by the introspection-hardening control (that only handled validation errors). An unauthenticated caller possessing only the public application id can iteratively recover hidden schema identifiers — including registered Cloud Code function names and Parse class and field names — by submitting queries or mutations whose variables contain near-miss enum values or input-object field names. This is a follow-up bypass of GHSA-8cph-rgr4-g5vj. The issue is fixed in 9.10.0-alpha.4 and 8.6.85. | ||||
| CVE-2026-47122 | 1 Sparkle-project | 1 Sparkle | 2026-07-21 | 4.2 Medium |
| Sparkle is a software update framework for macOS. In versions up to and including 2.9.1, `Autoupdate/AppInstaller.m`'s `shouldAcceptNewConnection:` only enforces `SUCodeSigningVerifier validateConnection:` before stage 1 completes. After `_performedStage1Installation = YES`, new connections to the registered Mach service `<bundleId>-spki` are accepted from any local process without team-ID or code-signing checks. As of time of publication, no known patched versions are available. | ||||
| CVE-2026-63949 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix OOB read on zero-length message_store() linedisp_display() unconditionally reads msg[count - 1] before checking whether count is zero, so a write of zero bytes to the message sysfs attribute hits msg[-1]: write(fd, "", 0); -> message_store(..., buf, count=0) -> linedisp_display(linedisp, buf, count=0) -> msg[count - 1] == '\n' ; OOB read The kernfs write buffer for that store is a 1-byte allocation (kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0), so msg[-1] is a 1-byte read before the slab object. On a KASAN-enabled kernel this trips an out-of-bounds report and panics; on stock kernels it silently reads adjacent slab data and, if that byte happens to be '\n', the following count-- wraps ssize_t 0 to -1 and is then passed to kmemdup_nul(). linedisp_display() is reached from the message_store() sysfs callback (drivers/auxdisplay/line-display.c message attribute, mode 0644) and from the in-tree initial-message setup with count == -1, so the OOB path is only userspace-triggerable via zero-byte writes; vfs_write() does not short-circuit on count == 0 and kernfs_fop_write_iter() dispatches the store callback regardless. Guard the trailing-newline trim with a count check. The existing if (!count) block then takes the clear-display path unchanged. Affects every auxdisplay driver that registers via linedisp_register() / linedisp_attach(): ht16k33, max6959, img-ascii-lcd, seg-led-gpio. | ||||