Export limit exceeded: 45680 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (45680 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-47729 | 1 Squid-cache | 1 Squid | 2026-06-26 | 6.5 Medium |
| A flaw was found in Squid. Due to improper input validation, an out-of-bounds read can occur in the FTP gateway. This issue allows an authenticated and trusted client to read memory from random transactions when accessing a misbehaving FTP server using the Squid gateway feature. | ||||
| CVE-2026-50012 | 1 Squid-cache | 1 Squid | 2026-06-26 | 5.5 Medium |
| A flaw was found in Squid. Due to improper input validation, a heap-based buffer overflow can occur when processing cache digests. This issue allows a trusted server to cause a denial of service when sending specially crafted replies to cache_digest request messages. | ||||
| CVE-2026-53027 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked() When a compressed or sparse attribute has its clusters frame-aligned, vcn is rounded down to the frame start using cmask, which can result in vcn != vcn0. In this case, vcn and vcn0 may reside in different attribute segments. The code already handles the case where vcn is in a different segment by loading its runs before allocation. However, it fails to load runs for vcn0 when vcn0 resides in a different segment than vcn. This causes run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was never loaded into the in-memory run list, triggering the WARN_ON(1). Fix this by adding a missing check for vcn0 after the existing vcn segment check. If vcn0 falls outside the current segment range [svcn, evcn1), find and load the attribute segment containing vcn0 before performing the run lookup. The following scenario triggers the bug: attr_data_get_block_locked() vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment load runs for vcn segment <- vcn0 segment not loaded! attr_allocate_clusters() <- allocation succeeds run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN WARN_ON(1) <- bug fires here! | ||||
| CVE-2026-53178 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction Add guards to ensure ie_length is large enough before subtracting fixed IE offsets to prevent unsigned integer underflow. | ||||
| CVE-2026-52964 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Bound MIDI 2.0 endpoint descriptor scans The USB MIDI 2.0 endpoint parser has the same descriptor walking pattern as the legacy MIDI parser. It validates bLength against bNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against the remaining bytes in the endpoint-extra scan. A malformed device can therefore make later baAssoGrpTrmBlkID[] reads consume bytes past the walked descriptor. Reject zero-length and overlong descriptors while walking endpoint extras. | ||||
| CVE-2026-53043 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: validate qr_numregions in dlm_match_regions() Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()". In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION network message is used to drive loops over the qr_regions buffer without sufficient validation. This series fixes two issues: - Patch 1 adds a bounds check to reject messages where qr_numregions exceeds O2NM_MAX_REGIONS. The o2net layer only validates message byte length; it does not constrain field values, so a crafted message can set qr_numregions up to 255 and trigger out-of-bounds reads past the 1024-byte qr_regions buffer. - Patch 2 fixes an off-by-one in the local-vs-remote comparison loop, which uses '<=' instead of '<', reading one entry past the valid range even when qr_numregions is within bounds. This patch (of 2): The qr_numregions field from a DLM_QUERY_REGION network message is used directly as loop bounds in dlm_match_regions() without checking against O2NM_MAX_REGIONS. Since qr_regions is sized for at most O2NM_MAX_REGIONS (32) entries, a crafted message with qr_numregions > 32 causes out-of-bounds reads past the qr_regions buffer. Add a bounds check for qr_numregions before entering the loops. | ||||
| CVE-2026-53044 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc/tegra: cbb: Fix incorrect ARRAY_SIZE in fabric lookup tables Fix incorrect ARRAY_SIZE usage in fabric lookup tables which could cause out-of-bounds access during target timeout lookup. | ||||
| CVE-2026-53059 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count. | ||||
| CVE-2026-52956 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in __ceph_x_decrypt() In __ceph_x_decrypt(), a part of the buffer p is interpreted as a ceph_x_encrypt_header, and the magic field of this struct is accessed. This happens without any guarantee that the buffer is large enough to hold this struct. The function parameter ciphertext_len represents the length of the ciphertext to decrypt and is guaranteed to be at most the remaining size of the allocated buffer p. However, this value is not necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold the ciphertext at its end with a ciphertext_len of 8 or less, can trigger an out-of-bounds memory access when accessing hdr->magic. This patch fixes the issue by adding a check to ensure that the decrypted plaintext in the buffer is large enough to represent at least the ceph_x_encrypt_header. | ||||
| CVE-2026-52958 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in osdmap_decode() When decoding osd_state and osd_weight from an incoming osdmap in osdmap_decode(), both are decoded for each osd, i.e., map->max_osd times. The ceph_decode_need() check only accounts for sizeof(*map->osd_weight) once. This can potentially result in an out-of-bounds memory access if the incoming message is corrupted such that the max_osd value exceeds the actual content of the osdmap message. This patch fixes the issue by changing the corresponding part in the ceph_decode_need() check to account for map->max_osd*sizeof(*map->osd_weight). | ||||
| CVE-2026-52959 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virt: sev-guest: Do not use host-controlled page order in cleanup path When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST), get_ext_report() allocates a buffer to retrieve a certificate blob from the host, keeping track of its size in report_req->certs_len. However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating an invalid buffer size, as well as the expected length of such buffer. get_ext_report() subsequently updates report_req->certs_len with the host-controlled value, and cleans up the buffer by computing a page order from such value. This is incorrect, as the host-provided length may not match the page order of the original allocation, potentially resulting in corruption in the page allocator. Fix this by using alloc_pages_exact() instead, and reusing @npages to compute the size passed to free_pages_exact(). For consistency, also use @npages to compute the size when allocating the pages, even though this last change has no functional effect. | ||||
| CVE-2026-53221 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup() In vti6_tnl_lookup(), when an exact match for a tunnel fails, the code falls back to searching for wildcard tunnels: - Tunnels matching the packet's local address, with any remote address wildcard remote). - Tunnels matching the packet's remote address, with any local address (wildcard local). However, vti6 stores all these different types of tunnels in the same hash table (ip6n->tnls_r_l) prone to hash collisions. The bug is that the fallback search loops in vti6_tnl_lookup() were missing checks to ensure that the candidate tunnel actually has a wildcard address. | ||||
| CVE-2026-53074 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb bpf_prog_test_run_skb() calls eth_type_trans() first and then uses skb->protocol to initialize sk family and address fields for the test run. For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb) even when the provided test input only contains an Ethernet header. Reject the input earlier if the Ethernet frame carries IPv4/IPv6 EtherType but the L3 header is too short. Fold the IPv4/IPv6 header length checks into the existing protocol switch and return -EINVAL before accessing the network headers. | ||||
| CVE-2026-53078 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix same-register dst/src OOB read and pointer leak in sock_ops When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg, the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the destination register in the !fullsock / !locked_tcp_sock path. Both macros borrow a temporary register to check is_fullsock / is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with a request_sock), dst_reg should be zeroed but is not, leaving the stale ctx pointer: - SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer, leading to stack-out-of-bounds access in helpers like bpf_skc_to_tcp6_sock(). - SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the verifier believes is a SCALAR_VALUE, leaking a kernel pointer. Fix both macros by: - Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the added instruction. - Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register restore in the !fullsock path, placed after the restore because dst_reg == src_reg means we need src_reg intact to read ctx->temp. | ||||
| CVE-2026-53198 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL A deferred byte-range lock (an SMB2_LOCK that blocks) registers an async work on conn->async_requests via setup_async_work(), with cancel_fn = smb2_remove_blocked_lock and cancel_argv[0] pointing at the struct file_lock. When the request is cancelled, the worker frees the file_lock with locks_free_lock() and takes the cancelled early-exit, which "goto out"s and never reaches release_async_work() -- the only site that unlinks the work from conn->async_requests and clears cancel_fn/cancel_argv. The work therefore stays matchable on async_requests with a live cancel_fn pointing at the freed file_lock, until connection teardown finally runs release_async_work(). smb2_cancel() fires cancel_fn unconditionally with no state guard, so a second SMB2_CANCEL for the same AsyncId, arriving in that window, re-runs smb2_remove_blocked_lock() on the freed file_lock -- a slab use-after-free: BUG: KASAN: slab-use-after-free in __locks_delete_block __locks_delete_block locks_delete_block ksmbd_vfs_posix_lock_unblock smb2_remove_blocked_lock smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn handle_ksmbd_work Allocated by ...: locks_alloc_lock <- smb2_lock Freed by ...: locks_free_lock <- smb2_lock (cancelled branch) ... cache file_lock_cache of size 192 Reproduced on mainline with KASAN by an authenticated SMB client. Skip a work whose state is already KSMBD_WORK_CANCELLED so its cancel callback cannot be fired a second time. | ||||
| CVE-2026-53212 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_tunnel: fix use-after-free on object destroy nft_tunnel_obj_destroy() calls metadata_dst_free() which directly kfree()s the metadata_dst, ignoring the dst_entry refcount. Packets that took a reference via dst_hold() in nft_tunnel_obj_eval() and are still queued (e.g. in a netem qdisc) are left with a dangling pointer. When these packets are eventually dequeued, dst_release() operates on freed memory. Replace metadata_dst_free() with dst_release() so the metadata_dst is freed only after all references are dropped. The dst subsystem already handles metadata_dst cleanup in dst_destroy() when DST_METADATA is set. | ||||
| CVE-2026-53219 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: avoid leaking percpu counter pointers The native and compat get-entries paths copy the fixed rule entry header from the kernelized rule blob to userspace before overwriting the entry's counter fields with a sanitized counter snapshot. On SMP kernels, entry->counters.pcnt contains the percpu allocation address used by x_tables rule counters. A caller can provide a userspace buffer that faults during the initial fixed-header copy after pcnt has been copied but before the later sanitized counter copy runs. The syscall then returns -EFAULT while leaving the raw percpu pointer in userspace. Copy only the fixed entry prefix before counters from the kernelized rule blob, then copy the sanitized counter snapshot into the counter field. Apply this ordering to the IPv4, IPv6, and ARP native and compat get-entries implementations so a fault cannot expose the internal percpu counter pointer. | ||||
| CVE-2026-53009 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix double-free of tx_buf skb If ice_tso() or ice_tx_csum() fail, the error path in ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points to it and is marked as valid (ICE_TX_BUF_SKB). 'next_to_use' remains unchanged, so the potential problem will likely fix itself when the next packet is transmitted and the tx_buf gets overwritten. But if there is no next packet and the interface is brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf() will find the tx_buf and free the skb for the second time. The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error path, so that ice_unmap_and_free_tx_buf(). Move the initialization of 'first' up, to ensure it's already valid in case we hit the linearization error path. The bug was spotted by AI while I had it looking for something else. It also proposed an initial version of the patch. I reproduced the bug and tested the fix by adding code to inject failures, on a build with KASAN. I looked for similar bugs in related Intel drivers and did not find any. | ||||
| CVE-2026-48933 | 2026-06-26 | N/A | ||
| A flaw in Node.js WebCrypto implementation can crash the process if the input of `subtle.encrypt()` is a multiple of 2GiB. This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**. | ||||
| CVE-2026-48618 | 2026-06-26 | N/A | ||
| A flaw in Node.js TLS hostname handling can cause Node.js unicode dot separator handling can lead to tls wildcard-depth authentication bypass due to resolver and verifier hostname normalization mismat. This can lead to confidentiality impact or bypass of the intended security boundary under affected configurations. This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**. | ||||