Export limit exceeded: 346727 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 346727 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (346727 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31598 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix possible deadlock between unlink and dio_end_io_write ocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem, while in ocfs2_dio_end_io_write, it acquires these locks in reverse order. This creates an ABBA lock ordering violation on lock classes ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] and ocfs2_file_ip_alloc_sem_key. Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem): ocfs2_unlink ocfs2_prepare_orphan_dir ocfs2_lookup_lock_orphan_dir inode_lock(orphan_dir_inode) <- lock A __ocfs2_prepare_orphan_dir ocfs2_prepare_dir_for_insert ocfs2_extend_dir ocfs2_expand_inline_dir down_write(&oi->ip_alloc_sem) <- Lock B Lock Chain #1 (ip_alloc_sem -> orphan dir inode_lock): ocfs2_dio_end_io_write down_write(&oi->ip_alloc_sem) <- Lock B ocfs2_del_inode_from_orphan() inode_lock(orphan_dir_inode) <- Lock A Deadlock Scenario: CPU0 (unlink) CPU1 (dio_end_io_write) ------ ------ inode_lock(orphan_dir_inode) down_write(ip_alloc_sem) down_write(ip_alloc_sem) inode_lock(orphan_dir_inode) Since ip_alloc_sem is to protect allocation changes, which is unrelated with operations in ocfs2_del_inode_from_orphan. So move ocfs2_del_inode_from_orphan out of ip_alloc_sem to fix the deadlock. | ||||
| CVE-2026-31561 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/cpu: Remove X86_CR4_FRED from the CR4 pinned bits mask Commit in Fixes added the FRED CR4 bit to the CR4 pinned bits mask so that whenever something else modifies CR4, that bit remains set. Which in itself is a perfectly fine idea. However, there's an issue when during boot FRED is initialized: first on the BSP and later on the APs. Thus, there's a window in time when exceptions cannot be handled. This becomes particularly nasty when running as SEV-{ES,SNP} or TDX guests which, when they manage to trigger exceptions during that short window described above, triple fault due to FRED MSRs not being set up yet. See Link tag below for a much more detailed explanation of the situation. So, as a result, the commit in that Link URL tried to address this shortcoming by temporarily disabling CR4 pinning when an AP is not online yet. However, that is a problem in itself because in this case, an attack on the kernel needs to only modify the online bit - a single bit in RW memory - and then disable CR4 pinning and then disable SM*P, leading to more and worse things to happen to the system. So, instead, remove the FRED bit from the CR4 pinning mask, thus obviating the need to temporarily disable CR4 pinning. If someone manages to disable FRED when poking at CR4, then idt_invalidate() would make sure the system would crash'n'burn on the first exception triggered, which is a much better outcome security-wise. | ||||
| CVE-2026-31565 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix deadlock during netdev reset with active connections Resolve deadlock that occurs when user executes netdev reset while RDMA applications (e.g., rping) are active. The netdev reset causes ice driver to remove irdma auxiliary driver, triggering device_delete and subsequent client removal. During client removal, uverbs_client waits for QP reference count to reach zero while cma_client holds the final reference, creating circular dependency and indefinite wait in iWARP mode. Skip QP reference count wait during device reset to prevent deadlock. | ||||
| CVE-2026-31567 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PM: sleep: Drop spurious WARN_ON() from pm_restore_gfp_mask() Commit 35e4a69b2003f ("PM: sleep: Allow pm_restrict_gfp_mask() stacking") introduced refcount-based GFP mask management that warns when pm_restore_gfp_mask() is called with saved_gfp_count == 0. Some hibernation paths call pm_restore_gfp_mask() defensively where the GFP mask may or may not be restricted depending on the execution path. For example, the uswsusp interface invokes it in SNAPSHOT_CREATE_IMAGE, SNAPSHOT_UNFREEZE, and snapshot_release(). Before the stacking change this was a silent no-op; it now triggers a spurious WARNING. Remove the WARN_ON() wrapper from the !saved_gfp_count check while retaining the check itself, so that defensive calls remain harmless without producing false warnings. [ rjw: Subject tweak ] | ||||
| CVE-2026-31571 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Unlink NV12 planes earlier unlink_nv12_plane() will clobber parts of the plane state potentially already set up by plane_atomic_check(), so we must make sure not to call the two in the wrong order. The problem happens when a plane previously selected as a Y plane is now configured as a normal plane by user space. plane_atomic_check() will first compute the proper plane state based on the userspace request, and unlink_nv12_plane() later clears some of the state. This used to work on account of unlink_nv12_plane() skipping the state clearing based on the plane visibility. But I removed that check, thinking it was an impossible situation. Now when that situation happens unlink_nv12_plane() will just WARN and proceed to clobber the state. Rather than reverting to the old way of doing things, I think it's more clear if we unlink the NV12 planes before we even compute the new plane state. (cherry picked from commit 017ecd04985573eeeb0745fa2c23896fb22ee0cc) | ||||
| CVE-2026-31629 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: add missing return after LLCP_CLOSED checks In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket state is LLCP_CLOSED, the code correctly calls release_sock() and nfc_llcp_sock_put() but fails to return. Execution falls through to the remainder of the function, which calls release_sock() and nfc_llcp_sock_put() again. This results in a double release_sock() and a refcount underflow via double nfc_llcp_sock_put(), leading to a use-after-free. Add the missing return statements after the LLCP_CLOSED branches in both functions to prevent the fall-through. | ||||
| CVE-2026-31576 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: hackrf: fix to not free memory after the device is registered in hackrf_probe() In hackrf driver, the following race condition occurs: ``` CPU0 CPU1 hackrf_probe() kzalloc(); // alloc hackrf_dev .... v4l2_device_register(); .... fd = sys_open("/path/to/dev"); // open hackrf fd .... v4l2_device_unregister(); .... kfree(); // free hackrf_dev .... sys_ioctl(fd, ...); v4l2_ioctl(); video_is_registered() // UAF!! .... sys_close(fd); v4l2_release() // UAF!! hackrf_video_release() kfree(); // DFB!! ``` When a V4L2 or video device is unregistered, the device node is removed so new open() calls are blocked. However, file descriptors that are already open-and any in-flight I/O-do not terminate immediately; they remain valid until the last reference is dropped and the driver's release() is invoked. Therefore, freeing device memory on the error path after hackrf_probe() has registered dev it will lead to a race to use-after-free vuln, since those already-open handles haven't been released yet. And since release() free memory too, race to use-after-free and double-free vuln occur. To prevent this, if device is registered from probe(), it should be modified to free memory only through release() rather than calling kfree() directly. | ||||
| CVE-2026-31578 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: as102: fix to not free memory after the device is registered in as102_usb_probe() In as102_usb driver, the following race condition occurs: ``` CPU0 CPU1 as102_usb_probe() kzalloc(); // alloc as102_dev_t .... usb_register_dev(); fd = sys_open("/path/to/dev"); // open as102 fd .... usb_deregister_dev(); .... kfree(); // free as102_dev_t .... sys_close(fd); as102_release() // UAF!! as102_usb_release() kfree(); // DFB!! ``` When a USB character device registered with usb_register_dev() is later unregistered (via usb_deregister_dev() or disconnect), the device node is removed so new open() calls fail. However, file descriptors that are already open do not go away immediately: they remain valid until the last reference is dropped and the driver's .release() is invoked. In as102, as102_usb_probe() calls usb_register_dev() and then, on an error path, does usb_deregister_dev() and frees as102_dev_t right away. If userspace raced a successful open() before the deregistration, that open FD will later hit as102_release() --> as102_usb_release() and access or free as102_dev_t again, occur a race to use-after-free and double-free vuln. The fix is to never kfree(as102_dev_t) directly once usb_register_dev() has succeeded. After deregistration, defer freeing memory to .release(). In other words, let release() perform the last kfree when the final open FD is closed. | ||||
| CVE-2026-31582 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (powerz) Fix use-after-free on USB disconnect After powerz_disconnect() frees the URB and releases the mutex, a subsequent powerz_read() call can acquire the mutex and call powerz_read_data(), which dereferences the freed URB pointer. Fix by: - Setting priv->urb to NULL in powerz_disconnect() so that powerz_read_data() can detect the disconnected state. - Adding a !priv->urb check at the start of powerz_read_data() to return -ENODEV on a disconnected device. - Moving usb_set_intfdata() before hwmon registration so the disconnect handler can always find the priv pointer. | ||||
| CVE-2026-31583 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix use-after-free in em28xx_v4l2_open() em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock, creating a race with em28xx_v4l2_init()'s error path and em28xx_v4l2_fini(), both of which free the em28xx_v4l2 struct and set dev->v4l2 to NULL under dev->lock. This race leads to two issues: - use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler, since the video_device is embedded in the freed em28xx_v4l2 struct. - NULL pointer dereference in em28xx_resolution_set() when accessing v4l2->norm, since dev->v4l2 has been set to NULL. Fix this by moving the mutex_lock() before the dev->v4l2 read and adding a NULL check for dev->v4l2 under the lock. | ||||
| CVE-2026-31591 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Lock all vCPUs when synchronzing VMSAs for SNP launch finish Lock all vCPUs when synchronizing and encrypting VMSAs for SNP guests, as allowing userspace to manipulate and/or run a vCPU while its state is being synchronized would at best corrupt vCPU state, and at worst crash the host kernel. Opportunistically assert that vcpu->mutex is held when synchronizing its VMSA (the SEV-ES path already locks vCPUs). | ||||
| CVE-2026-31604 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix device leak on probe failure Driver core holds a reference to the USB interface and its parent USB device while the interface is bound to a driver and there is no need to take additional references unless the structures are needed after disconnect. This driver takes a reference to the USB device during probe but does not to release it on all probe errors (e.g. when descriptor parsing fails). Drop the redundant device reference to fix the leak, reduce cargo culting, make it easier to spot drivers where an extra reference is needed, and reduce the risk of further memory leaks. | ||||
| CVE-2026-31615 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: renesas_usb3: validate endpoint index in standard request handlers The GET_STATUS and SET/CLEAR_FEATURE handlers extract the endpoint number from the host-supplied wIndex without any sort of validation. Fix this up by validating the number of endpoints actually match up with the number the device has before attempting to dereference a pointer based on this math. This is just like what was done in commit ee0d382feb44 ("usb: gadget: aspeed_udc: validate endpoint index for ast udc") for the aspeed driver. | ||||
| CVE-2026-31619 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: fireworks: bound device-supplied status before string array lookup The status field in an EFW response is a 32-bit value supplied by the firewire device. efr_status_names[] has 17 entries so a status value outside that range goes off into the weeds when looking at the %s value. Even worse, the status could return EFR_STATUS_INCOMPLETE which is 0x80000000, and is obviously not in that array of potential strings. Fix this up by properly bounding the index against the array size and printing "unknown" if it's not recognized. | ||||
| CVE-2026-31620 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: us144mkii: fix NULL deref on missing interface 0 A malicious USB device with the TASCAM US-144MKII device id can have a configuration containing bInterfaceNumber=1 but no interface 0. USB configuration descriptors are not required to assign interface numbers sequentially, so usb_ifnum_to_if(dev, 0) returns will NULL, which will then be dereferenced directly. Fix this up by checking the return value properly. | ||||
| CVE-2026-31621 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bnge: return after auxiliary_device_uninit() in error path When auxiliary_device_add() fails, the error block calls auxiliary_device_uninit() but does not return. The uninit drops the last reference and synchronously runs bnge_aux_dev_release(), which sets bd->auxr_dev = NULL and frees the underlying object. The subsequent bd->auxr_dev->net = bd->netdev then dereferences NULL, which is not a good thing to have happen when trying to clean up from an error. Add the missing return, as the auxiliary bus documentation states is a requirement (seems that LLM tools read documentation better than humans do...) | ||||
| CVE-2026-31623 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete() A malicious USB device claiming to be a CDC Phonet modem can overflow the skb_shared_info->frags[] array by sending an unbounded sequence of full-page bulk transfers. Drop the skb and increment the length error when the frag limit is reached. This matches the same fix that commit f0813bcd2d9d ("net: wwan: t7xx: fix potential skb->frags overflow in RX path") did for the t7xx driver. | ||||
| CVE-2026-31625 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: alps: fix NULL pointer dereference in alps_raw_event() Commit ecfa6f34492c ("HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them") attempted to fix up the HID drivers that had missed the previous fix that was done in 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference at raw event handle"), but the alps driver was missed. Fix this up by properly checking in the hid-alps driver that it had been claimed correctly before attempting to process the raw event. | ||||
| CVE-2026-31626 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: initialize le_tmp64 in rtw_BIP_verify() Initialize le_tmp64 to zero in rtw_BIP_verify() to prevent using uninitialized data. Smatch warns that only 6 bytes are copied to this 8-byte (u64) variable, leaving the last two bytes uninitialized: drivers/staging/rtl8723bs/core/rtw_security.c:1308 rtw_BIP_verify() warn: not copying enough bytes for '&le_tmp64' (8 vs 6 bytes) Initializing the variable at the start of the function fixes this warning and ensures predictable behavior. | ||||
| CVE-2026-31637 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: reject undecryptable rxkad response tickets rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then parses the buffer as plaintext without checking whether crypto_skcipher_decrypt() succeeded. A malformed RESPONSE can therefore use a non-block-aligned ticket length, make the decrypt operation fail, and still drive the ticket parser with attacker-controlled bytes. Check the decrypt result and abort the connection with RXKADBADTICKET when ticket decryption fails. | ||||