Export limit exceeded: 346641 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (346641 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31558 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Make kvm_get_vcpu_by_cpuid() more robust kvm_get_vcpu_by_cpuid() takes a cpuid parameter whose type is int, so cpuid can be negative. Let kvm_get_vcpu_by_cpuid() return NULL for this case so as to make it more robust. This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. | ||||
| CVE-2026-31593 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Reject attempts to sync VMSA of an already-launched/encrypted vCPU Reject synchronizing vCPU state to its associated VMSA if the vCPU has already been launched, i.e. if the VMSA has already been encrypted. On a host with SNP enabled, accessing guest-private memory generates an RMP #PF and panics the host. BUG: unable to handle page fault for address: ff1276cbfdf36000 #PF: supervisor write access in kernel mode #PF: error_code(0x80000003) - RMP violation PGD 5a31801067 P4D 5a31802067 PUD 40ccfb5063 PMD 40e5954063 PTE 80000040fdf36163 SEV-SNP: PFN 0x40fdf36, RMP entry: [0x6010fffffffff001 - 0x000000000000001f] Oops: Oops: 0003 [#1] SMP NOPTI CPU: 33 UID: 0 PID: 996180 Comm: qemu-system-x86 Tainted: G OE Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R7625/0H1TJT, BIOS 1.5.8 07/21/2023 RIP: 0010:sev_es_sync_vmsa+0x54/0x4c0 [kvm_amd] Call Trace: <TASK> snp_launch_update_vmsa+0x19d/0x290 [kvm_amd] snp_launch_finish+0xb6/0x380 [kvm_amd] sev_mem_enc_ioctl+0x14e/0x720 [kvm_amd] kvm_arch_vm_ioctl+0x837/0xcf0 [kvm] kvm_vm_ioctl+0x3fd/0xcc0 [kvm] __x64_sys_ioctl+0xa3/0x100 x64_sys_call+0xfe0/0x2350 do_syscall_64+0x81/0x10f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7ffff673287d </TASK> Note, the KVM flaw has been present since commit ad73109ae7ec ("KVM: SVM: Provide support to launch and run an SEV-ES guest"), but has only been actively dangerous for the host since SNP support was added. With SEV-ES, KVM would "just" clobber guest state, which is totally fine from a host kernel perspective since userspace can clobber guest state any time before sev_launch_update_vmsa(). | ||||
| CVE-2026-31603 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: sm750fb: fix division by zero in ps_to_hz() ps_to_hz() is called from hw_sm750_crtc_set_mode() without validating that pixclock is non-zero. A zero pixclock passed via FBIOPUT_VSCREENINFO causes a division by zero. Fix by rejecting zero pixclock in lynxfb_ops_check_var(), consistent with other framebuffer drivers. | ||||
| CVE-2026-31609 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid double-free in smbd_free_send_io() after smbd_send_batch_flush() smbd_send_batch_flush() already calls smbd_free_send_io(), so we should not call it again after smbd_post_send() moved it to the batch list. | ||||
| CVE-2026-31631 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix buffer overread in rxgk_do_verify_authenticator() Fix rxgk_do_verify_authenticator() to check the buffer size before checking the nonce. | ||||
| CVE-2026-31633 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix integer overflow in rxgk_verify_response() In rxgk_verify_response(), there's a potential integer overflow due to rounding up token_len before checking it, thereby allowing the length check to be bypassed. Fix this by checking the unrounded value against len too (len is limited as the response must fit in a single UDP packet). | ||||
| CVE-2026-31634 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix reference count leak in rxrpc_server_keyring() This patch fixes a reference count leak in rxrpc_server_keyring() by checking if rx->securities is already set. | ||||
| CVE-2026-31646 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool() page_pool_create() can return an ERR_PTR on failure. The return value is used unconditionally in the loop that follows, passing the error pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(), which dereferences it, causing a kernel oops. Add an IS_ERR check after page_pool_create() to return early on failure. | ||||
| CVE-2026-31655 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled Keep the NOC_HDCP clock always enabled to fix the potential hang caused by the NoC ADB400 port power down handshake. | ||||
| CVE-2026-31658 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit() When dma_map_single() fails in tse_start_xmit(), the function returns NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the stack the packet was consumed, the skb is never freed, leaking memory on every DMA mapping failure. Add dev_kfree_skb_any() before returning to properly free the skb. | ||||
| CVE-2026-31661 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: Fix dma_free_coherent() size dma_alloc_consistent() may change the size to align it. The new size is saved in alloced. Change the free size to match the allocation size. | ||||
| CVE-2026-31672 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00usb: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the USB anchor lifetime so that it is released on driver unbind. | ||||
| CVE-2026-31643 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix key parsing memleak In rxrpc_preparse_xdr_yfs_rxgk(), the memory attached to token->rxgk can be leaked in a few error paths after it's allocated. Fix this by freeing it in the "reject_token:" case. | ||||
| CVE-2026-31648 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: filemap: fix nr_pages calculation overflow in filemap_map_pages() When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I encountered some very strange crash issues showing up as "Bad page state": " [ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb [ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb [ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff) [ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000 [ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000 [ 734.496442] page dumped because: nonzero mapcount " After analyzing this page’s state, it is hard to understand why the mapcount is not 0 while the refcount is 0, since this page is not where the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can reproduce the crash as well and captured the first warning where the issue appears: " [ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0 [ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 734.469315] memcg:ffff000807a8ec00 [ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540" [ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff) ...... [ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1), const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *: (struct folio *)_compound_head(page + nr_pages - 1))) != folio) [ 734.469390] ------------[ cut here ]------------ [ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468, CPU#90: stress-ng-mlock/9430 [ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P) [ 734.469555] set_pte_range+0xd8/0x2f8 [ 734.469566] filemap_map_folio_range+0x190/0x400 [ 734.469579] filemap_map_pages+0x348/0x638 [ 734.469583] do_fault_around+0x140/0x198 ...... [ 734.469640] el0t_64_sync+0x184/0x188 " The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page + nr_pages - 1) != folio, folio)", which indicates that set_pte_range() tried to map beyond the large folio’s size. By adding more debug information, I found that 'nr_pages' had overflowed in filemap_map_pages(), causing set_pte_range() to establish mappings for a range exceeding the folio size, potentially corrupting fields of pages that do not belong to this folio (e.g., page->_mapcount). After above analysis, I think the possible race is as follows: CPU 0 CPU 1 filemap_map_pages() ext4_setattr() //get and lock folio with old inode->i_size next_uptodate_folio() ....... //shrink the inode->i_size i_size_write(inode, attr->ia_size); //calculate the end_pgoff with the new inode->i_size file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1; end_pgoff = min(end_pgoff, file_end); ...... //nr_pages can be overflowed, cause xas.xa_index > end_pgoff end = folio_next_index(folio) - 1; nr_pages = min(end, end_pgoff) - xas.xa_index + 1; ...... //map large folio filemap_map_folio_range() ...... //truncate folios truncate_pagecache(inode, inode->i_size); To fix this issue, move the 'end_pgoff' calculation before next_uptodate_folio(), so the retrieved folio stays consistent with the file end to avoid ---truncated--- | ||||
| CVE-2026-31587 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm: move component registration to unmanaged version q6apm component registers dais dynamically from ASoC toplology, which are allocated using device managed version apis. Allocating both component and dynamic dais using managed version could lead to incorrect free ordering, dai will be freed while component still holding references to it. Fix this issue by moving component to unmanged version so that the dai pointers are only freeded after the component is removed. ================================================================== BUG: KASAN: slab-use-after-free in snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core] Read of size 8 at addr ffff00084493a6e8 by task kworker/u48:0/3426 Tainted: [W]=WARN Hardware name: LENOVO 21N2ZC5PUS/21N2ZC5PUS, BIOS N42ET57W (1.31 ) 08/08/2024 Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface] Call trace: show_stack+0x28/0x7c (C) dump_stack_lvl+0x60/0x80 print_report+0x160/0x4b4 kasan_report+0xac/0xfc __asan_report_load8_noabort+0x20/0x34 snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core] snd_soc_unregister_component_by_driver+0x50/0x88 [snd_soc_core] devm_component_release+0x30/0x5c [snd_soc_core] devres_release_all+0x13c/0x210 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x350/0x468 device_release_driver+0x18/0x30 bus_remove_device+0x1a0/0x35c device_del+0x314/0x7f0 device_unregister+0x20/0xbc apr_remove_device+0x5c/0x7c [apr] device_for_each_child+0xd8/0x160 apr_pd_status+0x7c/0xa8 [apr] pdr_notifier_work+0x114/0x240 [pdr_interface] process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 Allocated by task 77: kasan_save_stack+0x40/0x68 kasan_save_track+0x20/0x40 kasan_save_alloc_info+0x44/0x58 __kasan_kmalloc+0xbc/0xdc __kmalloc_node_track_caller_noprof+0x1f4/0x620 devm_kmalloc+0x7c/0x1c8 snd_soc_register_dai+0x50/0x4f0 [snd_soc_core] soc_tplg_pcm_elems_load+0x55c/0x1eb8 [snd_soc_core] snd_soc_tplg_component_load+0x4f8/0xb60 [snd_soc_core] audioreach_tplg_init+0x124/0x1fc [snd_q6apm] q6apm_audio_probe+0x10/0x1c [snd_q6apm] snd_soc_component_probe+0x5c/0x118 [snd_soc_core] soc_probe_component+0x44c/0xaf0 [snd_soc_core] snd_soc_bind_card+0xad0/0x2370 [snd_soc_core] snd_soc_register_card+0x3b0/0x4c0 [snd_soc_core] devm_snd_soc_register_card+0x50/0xc8 [snd_soc_core] x1e80100_platform_probe+0x208/0x368 [snd_soc_x1e80100] platform_probe+0xc0/0x188 really_probe+0x188/0x804 __driver_probe_device+0x158/0x358 driver_probe_device+0x60/0x190 __device_attach_driver+0x16c/0x2a8 bus_for_each_drv+0x100/0x194 __device_attach+0x174/0x380 device_initial_probe+0x14/0x20 bus_probe_device+0x124/0x154 deferred_probe_work_func+0x140/0x220 process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 Freed by task 3426: kasan_save_stack+0x40/0x68 kasan_save_track+0x20/0x40 __kasan_save_free_info+0x4c/0x80 __kasan_slab_free+0x78/0xa0 kfree+0x100/0x4a4 devres_release_all+0x144/0x210 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x350/0x468 device_release_driver+0x18/0x30 bus_remove_device+0x1a0/0x35c device_del+0x314/0x7f0 device_unregister+0x20/0xbc apr_remove_device+0x5c/0x7c [apr] device_for_each_child+0xd8/0x160 apr_pd_status+0x7c/0xa8 [apr] pdr_notifier_work+0x114/0x240 [pdr_interface] process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 | ||||
| CVE-2026-31588 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use scratch field in MMIO fragment to hold small write values When exiting to userspace to service an emulated MMIO write, copy the to-be-written value to a scratch field in the MMIO fragment if the size of the data payload is 8 bytes or less, i.e. can fit in a single chunk, instead of pointing the fragment directly at the source value. This fixes a class of use-after-free bugs that occur when the emulator initiates a write using an on-stack, local variable as the source, the write splits a page boundary, *and* both pages are MMIO pages. Because KVM's ABI only allows for physically contiguous MMIO requests, accesses that split MMIO pages are separated into two fragments, and are sent to userspace one at a time. When KVM attempts to complete userspace MMIO in response to KVM_RUN after the first fragment, KVM will detect the second fragment and generate a second userspace exit, and reference the on-stack variable. The issue is most visible if the second KVM_RUN is performed by a separate task, in which case the stack of the initiating task can show up as truly freed data. ================================================================== BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420 Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984 CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0xbe/0xfd print_address_description.constprop.0+0x19/0x170 __kasan_report.cold+0x6c/0x84 kasan_report+0x3a/0x50 check_memory_region+0xfd/0x1f0 memcpy+0x20/0x60 complete_emulated_mmio+0x305/0x420 kvm_arch_vcpu_ioctl_run+0x63f/0x6d0 kvm_vcpu_ioctl+0x413/0xb20 __se_sys_ioctl+0x111/0x160 do_syscall_64+0x30/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 RIP: 0033:0x42477d Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005 RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720 The buggy address belongs to the page: page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37 flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== The bug can also be reproduced with a targeted KVM-Unit-Test by hacking KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by overwrite the data value with garbage. Limit the use of the scratch fields to 8-byte or smaller accesses, and to just writes, as larger accesses and reads are not affected thanks to implementation details in the emulator, but add a sanity check to ensure those details don't change in the future. Specifically, KVM never uses on-stack variables for accesses larger that 8 bytes, e.g. uses an operand in the emulator context, and *al ---truncated--- | ||||
| CVE-2026-31589 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm: call ->free_folio() directly in folio_unmap_invalidate() We can only call filemap_free_folio() if we have a reference to (or hold a lock on) the mapping. Otherwise, we've already removed the folio from the mapping so it no longer pins the mapping and the mapping can be removed, causing a use-after-free when accessing mapping->a_ops. Follow the same pattern as __remove_mapping() and load the free_folio function pointer before dropping the lock on the mapping. That lets us make filemap_free_folio() static as this was the only caller outside filemap.c. | ||||
| CVE-2026-31632 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix leak of rxgk context in rxgk_verify_response() Fix rxgk_verify_response() to clean up the rxgk context it creates. | ||||
| CVE-2026-31592 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Protect *all* of sev_mem_enc_register_region() with kvm->lock Take and hold kvm->lock for before checking sev_guest() in sev_mem_enc_register_region(), as sev_guest() isn't stable unless kvm->lock is held (or KVM can guarantee KVM_SEV_INIT{2} has completed and can't rollack state). If KVM_SEV_INIT{2} fails, KVM can end up trying to add to a not-yet-initialized sev->regions_list, e.g. triggering a #GP Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 110 UID: 0 PID: 72717 Comm: syz.15.11462 Tainted: G U W O 6.16.0-smp-DEV #1 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:sev_mem_enc_register_region+0x3f0/0x4f0 ../include/linux/list.h:83 Code: <41> 80 3c 04 00 74 08 4c 89 ff e8 f1 c7 a2 00 49 39 ed 0f 84 c6 00 RSP: 0018:ffff88838647fbb8 EFLAGS: 00010256 RAX: dffffc0000000000 RBX: 1ffff92015cf1e0b RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000001000 RDI: ffff888367870000 RBP: ffffc900ae78f050 R08: ffffea000d9e0007 R09: 1ffffd4001b3c000 R10: dffffc0000000000 R11: fffff94001b3c001 R12: 0000000000000000 R13: ffff8982ab0bde00 R14: ffffc900ae78f058 R15: 0000000000000000 FS: 00007f34e9dc66c0(0000) GS:ffff89ee64d33000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe180adef98 CR3: 000000047210e000 CR4: 0000000000350ef0 Call Trace: <TASK> kvm_arch_vm_ioctl+0xa72/0x1240 ../arch/x86/kvm/x86.c:7371 kvm_vm_ioctl+0x649/0x990 ../virt/kvm/kvm_main.c:5363 __se_sys_ioctl+0x101/0x170 ../fs/ioctl.c:51 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x6f/0x1f0 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f34e9f7e9a9 Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f34e9dc6038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f34ea1a6080 RCX: 00007f34e9f7e9a9 RDX: 0000200000000280 RSI: 000000008010aebb RDI: 0000000000000007 RBP: 00007f34ea000d69 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f34ea1a6080 R15: 00007ffce77197a8 </TASK> with a syzlang reproducer that looks like: syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000040)={0x0, &(0x7f0000000180)=ANY=[], 0x70}) (async) syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000080)={0x0, &(0x7f0000000180)=ANY=[@ANYBLOB="..."], 0x4f}) (async) r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000200), 0x0, 0x0) r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) r2 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000240), 0x0, 0x0) r3 = ioctl$KVM_CREATE_VM(r2, 0xae01, 0x0) ioctl$KVM_SET_CLOCK(r3, 0xc008aeba, &(0x7f0000000040)={0x1, 0x8, 0x0, 0x5625e9b0}) (async) ioctl$KVM_SET_PIT2(r3, 0x8010aebb, &(0x7f0000000280)={[...], 0x5}) (async) ioctl$KVM_SET_PIT2(r1, 0x4070aea0, 0x0) (async) r4 = ioctl$KVM_CREATE_VM(0xffffffffffffffff, 0xae01, 0x0) openat$kvm(0xffffffffffffff9c, 0x0, 0x0, 0x0) (async) ioctl$KVM_SET_USER_MEMORY_REGION(r4, 0x4020ae46, &(0x7f0000000400)={0x0, 0x0, 0x0, 0x2000, &(0x7f0000001000/0x2000)=nil}) (async) r5 = ioctl$KVM_CREATE_VCPU(r4, 0xae41, 0x2) close(r0) (async) openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x8000, 0x0) (async) ioctl$KVM_SET_GUEST_DEBUG(r5, 0x4048ae9b, &(0x7f0000000300)={0x4376ea830d46549b, 0x0, [0x46, 0x0, 0x0, 0x0, 0x0, 0x1000]}) (async) ioctl$KVM_RUN(r5, 0xae80, 0x0) Opportunistically use guard() to avoid having to define a new error label and goto usage. | ||||
| CVE-2026-31608 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: server: avoid double-free in smb_direct_free_sendmsg after smb_direct_flush_send_list() smb_direct_flush_send_list() already calls smb_direct_free_sendmsg(), so we should not call it again after post_sendmsg() moved it to the batch list. | ||||