Export limit exceeded: 17293 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17293 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23247 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: secure_seq: add back ports to TS offset This reverts 28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets") tcp_tw_recycle went away in 2017. Zhouyan Deng reported off-path TCP source port leakage via SYN cookie side-channel that can be fixed in multiple ways. One of them is to bring back TCP ports in TS offset randomization. As a bonus, we perform a single siphash() computation to provide both an ISN and a TS offset. | ||||
| CVE-2026-23248 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix refcount bug and potential UAF in perf_mmap Syzkaller reported a refcount_t: addition on 0; use-after-free warning in perf_mmap. The issue is caused by a race condition between a failing mmap() setup and a concurrent mmap() on a dependent event (e.g., using output redirection). In perf_mmap(), the ring_buffer (rb) is allocated and assigned to event->rb with the mmap_mutex held. The mutex is then released to perform map_range(). If map_range() fails, perf_mmap_close() is called to clean up. However, since the mutex was dropped, another thread attaching to this event (via inherited events or output redirection) can acquire the mutex, observe the valid event->rb pointer, and attempt to increment its reference count. If the cleanup path has already dropped the reference count to zero, this results in a use-after-free or refcount saturation warning. Fix this by extending the scope of mmap_mutex to cover the map_range() call. This ensures that the ring buffer initialization and mapping (or cleanup on failure) happens atomically effectively, preventing other threads from accessing a half-initialized or dying ring buffer. | ||||
| CVE-2026-23250 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: check return value of xchk_scrub_create_subord Fix this function to return NULL instead of a mangled ENOMEM, then fix the callers to actually check for a null pointer and return ENOMEM. Most of the corrections here are for code merged between 6.2 and 6.10. | ||||
| CVE-2026-23251 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: only call xf{array,blob}_destroy if we have a valid pointer Only call the xfarray and xfblob destructor if we have a valid pointer, and be sure to null out that pointer afterwards. Note that this patch fixes a large number of commits, most of which were merged between 6.9 and 6.10. | ||||
| CVE-2026-23253 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: fix wrong reinitialization of ringbuffer on reopen dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which reinitializes the waitqueue list head to empty. Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the same DVR device share it), this orphans any existing waitqueue entries from io_uring poll or epoll, leaving them with stale prev/next pointers while the list head is reset to {self, self}. The waitqueue and spinlock in dvr_buffer are already properly initialized once in dvb_dmxdev_init(). The open path only needs to reset the buffer data pointer, size, and read/write positions. Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct assignment of data/size and a call to dvb_ringbuffer_reset(), which properly resets pread, pwrite, and error with correct memory ordering without touching the waitqueue or spinlock. | ||||
| CVE-2025-71268 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix reservation leak in some error paths when inserting inline extent If we fail to allocate a path or join a transaction, we return from __cow_file_range_inline() without freeing the reserved qgroup data, resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data() in such cases. | ||||
| CVE-2026-23258 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: liquidio: Initialize netdev pointer before queue setup In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq(). However, the pointer to this structure is stored in oct->props[i].netdev only after the calls to netif_set_real_num_rx_queues() and netif_set_real_num_tx_queues(). If either of these functions fails, setup_nic_devices() returns an error without freeing the allocated netdev. Since oct->props[i].netdev is still NULL at this point, the cleanup function liquidio_destroy_nic_device() will fail to find and free the netdev, resulting in a memory leak. Fix this by initializing oct->props[i].netdev before calling the queue setup functions. This ensures that the netdev is properly accessible for cleanup in case of errors. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-23262 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: gve: Fix stats report corruption on queue count change The driver and the NIC share a region in memory for stats reporting. The NIC calculates its offset into this region based on the total size of the stats region and the size of the NIC's stats. When the number of queues is changed, the driver's stats region is resized. If the queue count is increased, the NIC can write past the end of the allocated stats region, causing memory corruption. If the queue count is decreased, there is a gap between the driver and NIC stats, leading to incorrect stats reporting. This change fixes the issue by allocating stats region with maximum size, and the offset calculation for NIC stats is changed to match with the calculation of the NIC. | ||||
| CVE-2024-42160 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-03-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: check validation of fault attrs in f2fs_build_fault_attr() - It missed to check validation of fault attrs in parse_options(), let's fix to add check condition in f2fs_build_fault_attr(). - Use f2fs_build_fault_attr() in __sbi_store() to clean up code. | ||||
| CVE-2025-71269 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not free data reservation in fallback from inline due to -ENOSPC If we fail to create an inline extent due to -ENOSPC, we will attempt to go through the normal COW path, reserve an extent, create an ordered extent, etc. However we were always freeing the reserved qgroup data, which is wrong since we will use data. Fix this by freeing the reserved qgroup data in __cow_file_range_inline() only if we are not doing the fallback (ret is <= 0). | ||||
| CVE-2026-23254 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: gro: fix outer network offset The udp GRO complete stage assumes that all the packets inserted the RX have the `encapsulation` flag zeroed. Such assumption is not true, as a few H/W NICs can set such flag when H/W offloading the checksum for an UDP encapsulated traffic, the tun driver can inject GSO packets with UDP encapsulation and the problematic layout can also be created via a veth based setup. Due to the above, in the problematic scenarios, udp4_gro_complete() uses the wrong network offset (inner instead of outer) to compute the outer UDP header pseudo checksum, leading to csum validation errors later on in packet processing. Address the issue always clearing the encapsulation flag at GRO completion time. Such flag will be set again as needed for encapsulated packets by udp_gro_complete(). | ||||
| CVE-2026-23255 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: add proper RCU protection to /proc/net/ptype Yin Fengwei reported an RCU stall in ptype_seq_show() and provided a patch. Real issue is that ptype_seq_next() and ptype_seq_show() violate RCU rules. ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev to get device name without any barrier. At the same time, concurrent writers can remove a packet_type structure (which is correctly freed after an RCU grace period) and clear pt->dev without an RCU grace period. Define ptype_iter_state to carry a dev pointer along seq_net_private: struct ptype_iter_state { struct seq_net_private p; struct net_device *dev; // added in this patch }; We need to record the device pointer in ptype_get_idx() and ptype_seq_next() so that ptype_seq_show() is safe against concurrent pt->dev changes. We also need to add full RCU protection in ptype_seq_next(). (Missing READ_ONCE() when reading list.next values) Many thanks to Dong Chenchen for providing a repro. | ||||
| CVE-2026-23271 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix __perf_event_overflow() vs perf_remove_from_context() race Make sure that __perf_event_overflow() runs with IRQs disabled for all possible callchains. Specifically the software events can end up running it with only preemption disabled. This opens up a race vs perf_event_exit_event() and friends that will go and free various things the overflow path expects to be present, like the BPF program. | ||||
| CVE-2026-23272 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unconditionally bump set->nelems before insertion In case that the set is full, a new element gets published then removed without waiting for the RCU grace period, while RCU reader can be walking over it already. To address this issue, add the element transaction even if set is full, but toggle the set_full flag to report -ENFILE so the abort path safely unwinds the set to its previous state. As for element updates, decrement set->nelems to restore it. A simpler fix is to call synchronize_rcu() in the error path. However, with a large batch adding elements to already maxed-out set, this could cause noticeable slowdown of such batches. | ||||
| CVE-2026-23273 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: observe an RCU grace period in macvlan_common_newlink() error path valis reported that a race condition still happens after my prior patch. macvlan_common_newlink() might have made @dev visible before detecting an error, and its caller will directly call free_netdev(dev). We must respect an RCU period, either in macvlan or the core networking stack. After adding a temporary mdelay(1000) in macvlan_forward_source_one() to open the race window, valis repro was: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source (ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4 PING 1.2.3.4 (1.2.3.4): 56 data bytes RTNETLINK answers: Invalid argument BUG: KASAN: slab-use-after-free in macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) Read of size 8 at addr ffff888016bb89c0 by task e/175 CPU: 1 UID: 1000 PID: 175 Comm: e Not tainted 6.19.0-rc8+ #33 NONE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) kasan_report (mm/kasan/report.c:597) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) ? tasklet_init (kernel/softirq.c:983) macvlan_handle_frame (drivers/net/macvlan.c:501) Allocated by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) __kasan_kmalloc (mm/kasan/common.c:419) __kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5657 mm/slub.c:7140) alloc_netdev_mqs (net/core/dev.c:12012) rtnl_create_link (net/core/rtnetlink.c:3648) rtnl_newlink (net/core/rtnetlink.c:3830 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) Freed by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kfree (mm/slub.c:6674 mm/slub.c:6882) rtnl_newlink (net/core/rtnetlink.c:3845 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) | ||||
| CVE-2026-23274 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels IDLETIMER revision 0 rules reuse existing timers by label and always call mod_timer() on timer->timer. If the label was created first by revision 1 with XT_IDLETIMER_ALARM, the object uses alarm timer semantics and timer->timer is never initialized. Reusing that object from revision 0 causes mod_timer() on an uninitialized timer_list, triggering debugobjects warnings and possible panic when panic_on_warn=1. Fix this by rejecting revision 0 rule insertion when an existing timer with the same label is of ALARM type. | ||||
| CVE-2026-23275 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure ctx->rings is stable for task work flags manipulation If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while the ring is being resized, it's possible for the OR'ing of IORING_SQ_TASKRUN to happen in the small window of swapping into the new rings and the old rings being freed. Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is protected by RCU. The task work flags manipulation is inside RCU already, and if the resize ring freeing is done post an RCU synchronize, then there's no need to add locking to the fast path of task work additions. Note: this is only done for DEFER_TASKRUN, as that's the only setup mode that supports ring resizing. If this ever changes, then they too need to use the io_ctx_mark_taskrun() helper. | ||||
| CVE-2026-23276 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: add xmit recursion limit to tunnel xmit functions Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own recursion limit. When a bond device in broadcast mode has GRE tap interfaces as slaves, and those GRE tunnels route back through the bond, multicast/broadcast traffic triggers infinite recursion between bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing kernel stack overflow. The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not sufficient because tunnel recursion involves route lookups and full IP output, consuming much more stack per level. Use a lower limit of 4 (IP_TUNNEL_RECURSION_LIMIT) to prevent overflow. Add recursion detection using dev_xmit_recursion helpers directly in iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.). Move dev_xmit_recursion helpers from net/core/dev.h to public header include/linux/netdevice.h so they can be used by tunnel code. BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160 Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11 Workqueue: mld mld_ifc_work Call Trace: <TASK> __build_flow_key.constprop.0 (net/ipv4/route.c:515) ip_rt_update_pmtu (net/ipv4/route.c:1073) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) mld_sendpack mld_ifc_work process_one_work worker_thread </TASK> | ||||
| CVE-2026-23277 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit teql_master_xmit() calls netdev_start_xmit(skb, slave) to transmit through slave devices, but does not update skb->dev to the slave device beforehand. When a gretap tunnel is a TEQL slave, the transmit path reaches iptunnel_xmit() which saves dev = skb->dev (still pointing to teql0 master) and later calls iptunnel_xmit_stats(dev, pkt_len). This function does: get_cpu_ptr(dev->tstats) Since teql_master_setup() does not set dev->pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstats for teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computes NULL + __per_cpu_offset[cpu], resulting in a page fault. BUG: unable to handle page fault for address: ffff8880e6659018 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 68bc067 P4D 68bc067 PUD 0 Oops: Oops: 0002 [#1] SMP KASAN PTI RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89) Call Trace: <TASK> ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) __gre_xmit (net/ipv4/ip_gre.c:478) gre_tap_xmit (net/ipv4/ip_gre.c:779) teql_master_xmit (net/sched/sch_teql.c:319) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) neigh_direct_output (net/core/neighbour.c:1660) ip_finish_output2 (net/ipv4/ip_output.c:237) __ip_finish_output.part.0 (net/ipv4/ip_output.c:315) ip_mc_output (net/ipv4/ip_output.c:369) ip_send_skb (net/ipv4/ip_output.c:1508) udp_send_skb (net/ipv4/udp.c:1195) udp_sendmsg (net/ipv4/udp.c:1485) inet_sendmsg (net/ipv4/af_inet.c:859) __sys_sendto (net/socket.c:2206) Fix this by setting skb->dev = slave before calling netdev_start_xmit(), so that tunnel xmit functions see the correct slave device with properly allocated tstats. | ||||
| CVE-2026-23278 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: always walk all pending catchall elements During transaction processing we might have more than one catchall element: 1 live catchall element and 1 pending element that is coming as part of the new batch. If the map holding the catchall elements is also going away, its required to toggle all catchall elements and not just the first viable candidate. Otherwise, we get: WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404 RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables] [..] __nft_set_elem_destroy+0x106/0x380 [nf_tables] nf_tables_abort_release+0x348/0x8d0 [nf_tables] nf_tables_abort+0xcf2/0x3ac0 [nf_tables] nfnetlink_rcv_batch+0x9c9/0x20e0 [..] | ||||