Export limit exceeded: 354383 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (354383 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46152 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drop stray 'static' from fast-RX rx_result ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but its per-invocation rx_result is declared static. Concurrent callers then share one instance and can overwrite each other's result between ieee80211_rx_mesh_data() and the switch on res. That can make a packet that was queued or consumed by ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make a packet that should continue return as queued. Make res an automatic variable so each invocation keeps its own result. | ||||
| CVE-2026-46150 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fanotify: fix false positive on permission events fsnotify_get_mark_safe() may return false for a mark on an unrelated group, which results in bypassing the permission check. Fix by skipping over detached marks that are not in the current group. | ||||
| CVE-2026-46149 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show() target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a 256-byte stack buffer, then will memcpy() cur_len bytes from that buffer. snprintf() returns the length the output would have had, which can exceed the buffer size when the fabric WWN is long because iSCSI IQN names can be up to 223 bytes. The check at the memcpy() site only guards the destination page write, not the source read, so memcpy() will read past the stack buffer and copy adjacent stack contents to the sysfs reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic() will be triggered. Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length check to avoid buffer overflow") added the same bound to the target_lu_gp_members_show() but the tg_pt_gp variant was missed so resolve that here. | ||||
| CVE-2026-46145 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Validate rx_hash_key_len Sashiko points out that rx_hash_key_len comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow. | ||||
| CVE-2026-46138 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt hci_le_create_big_complete_evt() iterates over BT_BOUND connections for a BIG handle using a while loop, accessing ev->bis_handle[i++] on each iteration. However, there is no check that i stays within ev->num_bis before the array access. When a controller sends a LE_Create_BIG_Complete event with fewer bis_handle entries than there are BT_BOUND connections for that BIG, or with num_bis=0, the loop reads beyond the valid bis_handle[] flex array into adjacent heap memory. Since the out-of-bounds values typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle() rejects them and the connection remains in BT_BOUND state. The same connection is then found again by hci_conn_hash_lookup_big_state(), creating an infinite loop with hci_dev_lock held. Fix this by terminating the BIG if in case not all BIS could be setup properly. | ||||
| CVE-2026-46137 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: fix potential data-race This mptcp_pm_add_timer() helper is executed as a timer callback in softirq context. To avoid any data races, the socket lock needs to be held with bh_lock_sock(). If the socket is in use, retry again soon after, similar to what is done with the keepalive timer. | ||||
| CVE-2026-46135 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix race between ICReq handling and queue teardown nvmet_tcp_handle_icreq() updates queue->state after sending an Initialization Connection Response (ICResp), but it does so without serializing against target-side queue teardown. If an NVMe/TCP host sends an Initialization Connection Request (ICReq) and immediately closes the connection, target-side teardown may start in softirq context before io_work drains the already buffered ICReq. In that case, nvmet_tcp_schedule_release_queue() sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue reference under state_lock. If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and allows a later socket state change to re-enter teardown and issue a second kref_put() on an already released queue. The ICResp send failure path has the same problem. If teardown has already moved the queue to DISCONNECTING, a send error can still overwrite the state with NVMET_TCP_Q_FAILED, again reopening the window for a second teardown path to drop the queue reference. Fix this by serializing both post-send state transitions with state_lock and bailing out if teardown has already started. Use -ESHUTDOWN as an internal sentinel for that bail-out path rather than propagating it as a transport error like -ECONNRESET. Keep nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before honoring that sentinel so receive-side parsing stays quiesced until the existing release path completes. | ||||
| CVE-2026-46133 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Reject unknown opcodes before ICRC processing Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv"), a single unauthenticated UDP packet can still trigger panic. That patch handled payload_size() underflow only for valid opcodes with short packets, not for packets carrying an unknown opcode. The unknown-opcode OOB read described below predates that commit and reaches back to the initial Soft RoCE driver. The check added there reads pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The rxe_opcode[] array has 256 entries but is only populated for defined IB opcodes; any other entry (for example opcode 0xff) is zero-initialized, so length == 0 and the check degenerates to pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES which underflows when length == 0 and passes a huge value to rxe_crc32(), causing an out-of-bounds read of the skb payload. Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after rdma link add rxe0 type rxe netdev eth0 A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and QPN=IB_MULTICAST_QPN triggers: BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170 Read of size 1 at addr ... The buggy address is located 0 bytes to the right of allocated 704-byte region Call Trace: crc32_le+0x115/0x170 rxe_icrc_hdr.isra.0+0x226/0x300 rxe_icrc_check+0x13f/0x3a0 rxe_rcv+0x6e1/0x16e0 rxe_udp_encap_recv+0x20a/0x320 udp_queue_rcv_one_skb+0x7ed/0x12c0 Subsequent packets with the same shape fault on unmapped memory and panic the kernel. The trigger requires only module load and "rdma link add"; no QP, no connection, and no authentication. Fix this by rejecting packets whose opcode has no rxe_opcode[] entry, detected via the zero mask or zero length, before any length arithmetic runs. | ||||
| CVE-2026-46129 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double free in create_space_info() error path When kobject_init_and_add() fails, the call chain is: create_space_info() -> btrfs_sysfs_add_space_info_type() -> kobject_init_and_add() -> failure -> kobject_put(&space_info->kobj) -> space_info_release() -> kfree(space_info) Then control returns to create_space_info(): btrfs_sysfs_add_space_info_type() returns error -> goto out_free -> kfree(space_info) This causes a double free. Keep the direct kfree(space_info) for the earlier failure path, but after btrfs_sysfs_add_space_info_type() has called kobject_put(), let the kobject release callback handle the cleanup. | ||||
| CVE-2026-46125 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: remove station if connection prep fails If connection preparation fails for MLO connections, then the interface is completely reset to non-MLD. In this case, we must not keep the station since it's related to the link of the vif being removed. Delete an existing station. Any "new_sta" is already being removed, so that doesn't need changes. This fixes a use-after-free/double-free in debugfs if that's enabled, because a vif going from MLD (and to MLD, but that's not relevant here) recreates its entire debugfs. | ||||
| CVE-2026-46124 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: isofs: validate block number from NFS file handle in isofs_export_iget isofs_fh_to_dentry() and isofs_fh_to_parent() pass an attacker- controlled block number (ifid->block or ifid->parent_block) from the NFS file handle to isofs_export_iget(), which only rejects block == 0 before calling isofs_iget() and ultimately sb_bread(). A crafted file handle with fh_len sufficient to pass the check added by commit 0405d4b63d08 ("isofs: Prevent the use of too small fid") can still drive the server to read any in-range block on the backing device as if it were an iso_directory_record. That earlier fix was assigned CVE-2025-37780. sb_bread() on an out-of-range block returns NULL cleanly via the EIO path, so there is no memory-safety violation. For in-range reads of adjacent-partition data on the same block device, the unrelated bytes end up in iso_inode_info fields that reach the NFS client as dentry metadata. The deployment surface (isofs exported over NFS from loop-mounted images) is narrow and requires an authenticated NFS peer, but the malformed-file-handle class is reportable as hardening next to the existing CVE-2025-37780 fix. Reject block >= ISOFS_SB(sb)->s_nzones in isofs_export_iget() so the check covers both isofs_fh_to_dentry() and isofs_fh_to_parent() call sites with a single line. | ||||
| CVE-2026-46123 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: clamp rx length before skb_put virtbt_rx_work() calls skb_put(skb, len) where len comes directly from virtqueue_get_buf() with no validation against the buffer we posted to the device. The RX skb is allocated in virtbt_add_inbuf() and exposed to virtio as exactly 1000 bytes via sg_init_one(). Checking len against skb_tailroom(skb) is not sufficient because alloc_skb() can leave more tailroom than the 1000 bytes actually handed to the device. A malicious or buggy backend can therefore report used.len between 1001 and skb_tailroom(skb), causing skb_put() to include uninitialized kernel heap bytes that were never written by the device. The same path also accepts len == 0, in which case skb_put(skb, 0) leaves the skb empty but virtbt_rx_handle() still reads the pkt_type byte from skb->data, consuming uninitialized memory. Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and sg_init_one(), and gate virtbt_rx_work() on that same constant so the bound checked matches the buffer actually exposed to the device. Reject used.len == 0 in the same gate so an empty completion can no longer reach virtbt_rx_handle(). Use bt_dev_err_ratelimited() because the length value comes from an untrusted backend that can otherwise flood the kernel log. Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened the USB 9p transport against unchecked device-reported length. | ||||
| CVE-2026-46120 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_gre: Use cached t->net in ip6erspan_changelink(). After commit 5e72ce3e3980 ("net: ipv6: Use link netns in newlink() of rtnl_link_ops"), ip6erspan_newlink() correctly resolves the per-netns ip6gre hash via link_net. ip6erspan_changelink() was not converted in that series and still uses dev_net(dev), which diverges from the device's creation netns after IFLA_NET_NS_FD migration. This re-inserts the tunnel into the wrong per-netns hash. The original netns keeps a stale entry. When that netns is later destroyed, ip6gre_exit_rtnl_net() walks the stale entry, producing a slab-use-after-free reported by KASAN, followed by a kernel BUG at net/core/dev.c (LIST_POISON1) in unregister_netdevice_many_notify(). Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). ip6gre_changelink() earlier in the same file already uses the cached t->net; only ip6erspan_changelink() has the wrong shape. | ||||
| CVE-2026-46119 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix slab-out-of-bounds access in auth message processing If a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLY contains a positive value in its result field, it is treated as an error code by ceph_handle_auth_reply() and returned to handle_auth_reply(). Thereafter, an attempt is made to send the preallocated message of type CEPH_MSG_AUTH, where the returned value is interpreted as the size of the front segment to send. If the result value in the message is greater than the size of the memory buffer allocated for the front segment, an out-of-bounds access occurs, and the content of the memory region beyond this buffer is sent out. This patch fixes the issue by treating only negative values in the result field as errors. Positive values are therefore treated as success in the same way as a zero value. Additionally, a BUG_ON is added to __send_prepared_auth_request() comparing the len parameter to front_alloc_len to prevent sending the message if it exceeds the bounds of the allocation and to make it easier to catch any logic flaws leading to this. | ||||
| CVE-2026-46117 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss() Sashiko points out that the user can specify WQs sharing the same CQ as a part of the uAPI and this will trigger the WARN_ON() then go on to corrupt the kernel. Just reject it outright and fail the QP creation. | ||||
| CVE-2026-46116 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s hlist_del_rcu calls under syzkaller load on linux-6.12.y stable (reproduced on 6.12.47, also reachable via the same code path on torvalds/master and on the ipsec tree). Nine unique signatures cluster in the xfrm_state lifecycle, the load-bearing one being: BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline] BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline] BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435 Workqueue: netns cleanup_net Call Trace: __hlist_del / hlist_del_rcu __xfrm_state_delete xfrm_state_delete xfrm_state_flush xfrm_state_fini ops_exit_list cleanup_net The other observed signatures hit the same slab object from __xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB write variant of __xfrm_state_delete, all on the byseq/byspi hash chains. __xfrm_state_delete() guards its byseq and byspi unhashes with value-based predicates: if (x->km.seq) hlist_del_rcu(&x->byseq); if (x->id.spi) hlist_del_rcu(&x->byspi); while everywhere else in the file (e.g. state_cache, state_cache_input) the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets x->id.spi = newspi inside xfrm_state_lock and then immediately inserts into byspi, but a path that observes x->id.spi != 0 outside of xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently with whether x is actually on the list. The same holds for x->km.seq versus byseq, and the bydst/bysrc unhashes have no predicate at all, so a second __xfrm_state_delete() on the same object writes through LIST_POISON pprev. The defensive change here: - Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst, bysrc, byseq and byspi so a second deletion is a no-op rather than a write through LIST_POISON pprev. The byseq/byspi nodes are already initialised in xfrm_state_alloc(). - Test hlist_unhashed() rather than the value predicate for byseq/byspi, so the unhash decision tracks list state rather than mutable scalar fields. Empirical verification: applied this patch on top of v6.12.47, rebuilt, and re-ran the same syzkaller harness for 1h16m on a previously-crashy configuration that produced ~100 hits each of slab-use-after-free Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in __xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at ~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo confirms the xfrm_state slab is actively allocated and freed during the run (~143 KiB resident), so the fuzzer is still exercising those code paths -- they just no longer crash. Reproduction: - Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV - syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db - 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal - 9 unique signatures collected in ~9h, all within xfrm_state lifecycle | ||||
| CVE-2026-46115 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: block: add pgmap check to biovec_phys_mergeable biovec_phys_mergeable() is used by the request merge, DMA mapping, and integrity merge paths to decide if two physically contiguous bvec segments can be coalesced into one. It currently has no check for whether the segments belong to different dev_pagemaps. When zone device memory is registered in multiple chunks, each chunk gets its own dev_pagemap. A single bio can legitimately contain bvecs from different pgmaps -- iov_iter_extract_bvecs() breaks at pgmap boundaries but the outer loop in bio_iov_iter_get_pages() continues filling the same bio. If such bvecs are physically contiguous, biovec_phys_mergeable() will coalesce them, making it impossible to recover the correct pgmap for the merged segment via page_pgmap(). Add a zone_device_pages_have_same_pgmap() check to prevent merging bvec segments that span different pgmaps. | ||||
| CVE-2026-46114 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c unconditionally dereferences 8 bytes at payload_addr(pkt): value = *(u64 *)payload_addr(pkt); check_rkey() previously accepted an ATOMIC_WRITE request with pktlen == resid == 0 because the length validation only compared pktlen against resid. A remote initiator that sets the RETH length to 0 therefore reaches atomic_write_reply() with a zero-byte logical payload, and the responder reads sizeof(u64) bytes from past the logical end of the packet into skb->head tailroom, then writes those 8 bytes into the attacker's MR via rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel tailroom per probe (the other 4 bytes are the packet's own trailing ICRC). IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is protocol-invalid. Hoist a strict length check into check_rkey() so the responder never reaches the unchecked dereference, and keep the existing WRITE-family length logic for the normal RDMA WRITE path. Reproduced on mainline with an unmodified rxe driver: a sustained zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer bytes into the attacker's MR, including recognisable kernel strings and partial kernel-direct-map pointer words. With this patch applied the responder rejects the PDU and the MR stays all-zero. | ||||
| CVE-2026-46113 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected GFN The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus the SPTE index. This assumption breaks for shadow paging if the guest page tables are modified between VM entries (similar to commit aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE", 2026-03-27). The flow is as follows: - a PDE is installed for a 2MB mapping, and a page in that area is accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages; the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because the guest's mapping is a huge page (and thus contiguous). - the PDE mapping is changed from outside the guest. - the guest accesses another page in the same 2MB area. KVM installs a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN (i.e. based on the new mapping, as changed in the previous step) but that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore the rmap entry cannot be found and removed when the kvm_mmu_page is zapped. - the memslot that covers the first 2MB mapping is deleted, and the kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove() only looks at the [sp->gfn, sp->gfn + 511] range established in step 1, and fails to find the rmap entry that was recorded by step 3. - any operation that causes an rmap walk for the same page accessed by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page. This includes dirty logging or MMU notifier invalidations (e.g., from MADV_DONTNEED). The underlying issue is that KVM's walking of shadow PTEs assumes that if a SPTE is present when KVM wants to install a non-leaf SPTE, then the existing kvm_mmu_page must be for the correct gfn. Because the only way for the gfn to be wrong is if KVM messed up and failed to zap a SPTE... which shouldn't happen, but *actually* only happens in response to a guest write. That bug dates back literally forever, as even the first version of KVM assumes that the GFN matches and walks into the "wrong" shadow page. However, that was only an imprecision until 2032a93d66fa ("KVM: MMU: Don't allocate gfns page for direct mmu pages") came along. Fix it by checking for a target gfn mismatch and zapping the existing SPTE. That way the old SP and rmap entries are gone, KVM installs the rmap in the right location, and everyone is happy. | ||||
| CVE-2026-46112 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix unlocked call to hns_roce_qp_remove() Sashiko points out that hns_roce_qp_remove() requires the caller to hold locks. The error flow in hns_roce_create_qp_common() doesn't hold those locks for the error unwind so it risks corrupting memory. Grab the same locks the other two callers use. | ||||