Export limit exceeded: 360532 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (360532 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53093 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix error pointer dereference The function brcmf_chip_add_core() can return an error pointer and is not checked. Add checks for error pointer. Detected by Smatch: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1010 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1013 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1016 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1019 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1022 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() [add missing wifi: prefix] | ||||
| CVE-2026-53092 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix linked reg delta tracking when src_reg == dst_reg Consider the case of rX += rX where src_reg and dst_reg are pointers to the same bpf_reg_state in adjust_reg_min_max_vals(). The latter first modifies the dst_reg in-place, and later in the delta tracking, the subsequent is_reg_const(src_reg)/reg_const_value(src_reg) reads the post-{add,sub} value instead of the original source. This is problematic since it sets an incorrect delta, which sync_linked_regs() then propagates to linked registers, thus creating a verifier-vs-runtime mismatch. Fix it by just skipping this corner case. | ||||
| CVE-2026-53091 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: pull headers in qdisc_pkt_len_segs_init() Most ndo_start_xmit() methods expects headers of gso packets to be already in skb->head. net/core/tso.c users are particularly at risk, because tso_build_hdr() does a memcpy(hdr, skb->data, hdr_len); qdisc_pkt_len_segs_init() already does a dissection of gso packets. Use pskb_may_pull() instead of skb_header_pointer() to make sure drivers do not have to reimplement this. Some malicious packets could be fed, detect them so that we can drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. | ||||
| CVE-2026-53090 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix ld_{abs,ind} failure path analysis in subprogs Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types. The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed. This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side. | ||||
| CVE-2026-53089 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in offloaded map/prog info fill When querying info for an offloaded BPF map or program, bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns() obtain the network namespace with get_net(dev_net(offmap->netdev)). However, the associated netdev's netns may be racing with teardown during netns destruction. If the netns refcount has already reached 0, get_net() performs a refcount_t increment on 0, triggering: refcount_t: addition on 0; use-after-free. Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains valid, they cannot prevent the netns refcount from reaching zero. Fix this by using maybe_get_net() instead of get_net(). maybe_get_net() uses refcount_inc_not_zero() and returns NULL if the refcount is already zero, which causes ns_get_path_cb() to fail and the caller to return -ENOENT -- the correct behavior when the netns is being destroyed. | ||||
| CVE-2026-53088 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix off-by-one in bcmgenet_put_txcb The write_ptr points to the next open tx_cb. We want to return the tx_cb that gets rewinded, so we must rewind the pointer first then return the tx_cb that it points to. That way the txcb can be correctly cleaned up. | ||||
| CVE-2026-53087 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix leaking free_bds While reclaiming the tx queue we fast forward the write pointer to drop any data in flight. These dropped frames are not added back to the pool of free bds. We also need to tell the netdev that we are dropping said data. | ||||
| CVE-2026-53086 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix racing timeout handler The bcmgenet_timeout handler tries to take down all tx queues when a single queue times out. This is over zealous and causes many race conditions with queues that are still chugging along. Instead lets only restart the timed out queue. | ||||
| CVE-2026-53085 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix mm lifecycle in open-coded task_vma iterator The open-coded task_vma iterator reads task->mm locklessly and acquires mmap_read_trylock() but never calls mmget(). If the task exits concurrently, the mm_struct can be freed as it is not SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free. Safely read task->mm with a trylock on alloc_lock and acquire an mm reference. Drop the reference via bpf_iter_mmput_async() in _destroy() and error paths. bpf_iter_mmput_async() is a local wrapper around mmput_async() with a fallback to mmput() on !CONFIG_MMU. Reject irqs-disabled contexts (including NMI) up front. Operations used by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async) take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from NMI or from a tracepoint that fires with those locks held could deadlock. A trylock on alloc_lock is used instead of the blocking task_lock() (get_task_mm) to avoid a deadlock when a softirq BPF program iterates a task that already holds its alloc_lock on the same CPU. | ||||
| CVE-2026-53084 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: return VMA snapshot from task_vma iterator Holding the per-VMA lock across the BPF program body creates a lock ordering problem when helpers acquire locks that depend on mmap_lock: vm_lock -> i_rwsem -> mmap_lock -> vm_lock Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then drop the lock before returning. The BPF program accesses only the snapshot. The verifier only trusts vm_mm and vm_file pointers (see BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference- counted with get_file() under the lock and released via fput() on the next iteration or in _destroy(). vm_mm is already correct because lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers are left as-is by memcpy() since the verifier treats them as untrusted. | ||||
| CVE-2026-53083 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix RCU stall in bpf_fd_array_map_clear() Add a missing cond_resched() in bpf_fd_array_map_clear() loop. For PROG_ARRAY maps with many entries this loop calls prog_array_map_poke_run() per entry which can be expensive, and without yielding this can cause RCU stalls under load: rcu: Stack dump where RCU GP kthread last ran: CPU: 0 UID: 0 PID: 30932 Comm: kworker/0:2 Not tainted 6.14.0-13195-g967e8def1100 #2 PREEMPT(undef) Workqueue: events prog_array_map_clear_deferred RIP: 0010:write_comp_data+0x38/0x90 kernel/kcov.c:246 Call Trace: <TASK> prog_array_map_poke_run+0x77/0x380 kernel/bpf/arraymap.c:1096 __fd_array_map_delete_elem+0x197/0x310 kernel/bpf/arraymap.c:925 bpf_fd_array_map_clear kernel/bpf/arraymap.c:1000 [inline] prog_array_map_clear_deferred+0x119/0x1b0 kernel/bpf/arraymap.c:1141 process_one_work+0x898/0x19d0 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x770/0x10b0 kernel/workqueue.c:3400 kthread+0x465/0x880 kernel/kthread.c:464 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x19/0x30 arch/x86/entry/entry_64.S:245 </TASK> | ||||
| CVE-2026-53082 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: hamradio: 6pack: fix uninit-value in sixpack_receive_buf sixpack_receive_buf() does not properly skip bytes with TTY error flags. The while loop iterates through the flags buffer but never advances the data pointer (cp), and passes the original count (including error bytes) to sixpack_decode(). This causes sixpack_decode() to process bytes that should have been skipped due to TTY errors. The TTY layer does not guarantee that cp[i] holds a meaningful value when fp[i] is set, so passing those positions to sixpack_decode() results in KMSAN reporting an uninit-value read. Fix this by processing bytes one at a time, advancing cp on each iteration, and only passing valid (non-error) bytes to sixpack_decode(). This matches the pattern used by slip_receive_buf() and mkiss_receive_buf() for the same purpose. | ||||
| CVE-2026-53081 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars When regsafe() compares two scalar registers that both carry BPF_ADD_CONST, check_scalar_ids() maps their full compound id (aka base | BPF_ADD_CONST flag) as one idmap entry. However, it never verifies that the underlying base ids, that is, with the flag stripped are consistent with existing idmap mappings. This allows construction of two verifier states where the old state has R3 = R2 + 10 (both sharing base id A) while the current state has R3 = R4 + 10 (base id C, unrelated to R2). The idmap creates two independent entries: A->B (for R2) and A|flag->C|flag (for R3), without catching that A->C conflicts with A->B. State pruning then incorrectly succeeds. Fix this by additionally verifying base ID mapping consistency whenever BPF_ADD_CONST is set: after mapping the compound ids, also invoke check_ids() on the base IDs (flag bits stripped). This ensures that if A was already mapped to B from comparing the source register, any ADD_CONST derivative must also derive from B, not an unrelated C. | ||||
| CVE-2026-53080 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL dereference of "old" filters before change() Like pointed out by Sashiko [1], since commit ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") TC filters are added to a shared block and published to datapath before their ->change() function is called. This is a problem for cls_fw: an invalid filter created with the "old" method can still classify some packets before it is destroyed by the validation logic added by Xiang. Therefore, insisting with repeated runs of the following script: # ip link add dev crash0 type dummy # ip link set dev crash0 up # mausezahn crash0 -c 100000 -P 10 \ > -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q & # sleep 1 # tc qdisc add dev crash0 egress_block 1 clsact # tc filter add block 1 protocol ip prio 1 matchall \ > action skbedit mark 65536 continue # tc filter add block 1 protocol ip prio 2 fw # ip link del dev crash0 can still make fw_classify() hit the WARN_ON() in [2]: WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399 Modules linked in: cls_fw(E) act_skbedit(E) CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014 RIP: 0010:fw_classify+0x244/0x250 [cls_fw] Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202 RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004 RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40 RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0 R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000 R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000 FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0 Call Trace: <TASK> tcf_classify+0x17d/0x5c0 tc_run+0x9d/0x150 __dev_queue_xmit+0x2ab/0x14d0 ip_finish_output2+0x340/0x8f0 ip_output+0xa4/0x250 raw_sendmsg+0x147d/0x14b0 __sys_sendto+0x1cc/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x126/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fca40e822ba Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003 RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000 </TASK> irq event stamp: 1045778 hardirqs last enabled at (1045784): [<ffffffff864ec042>] __up_console_sem+0x52/0x60 hardirqs last disabled at (1045789): [<ffffffff864ec027>] __up_console_sem+0x37/0x60 softirqs last enabled at (1045426): [<ffffffff874d48c7>] __alloc_skb+0x207/0x260 softirqs last disabled at (1045434): [<ffffffff874fe8f8>] __dev_queue_xmit+0x78/0x14d0 Then, because of the value in the packet's mark, dereference on 'q->handle' with NULL 'q' occurs: BUG: kernel NULL pointer dereference, address: 0000000000000038 [...] RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw] [...] Skip "old-style" classification on shared blocks, so that the NULL dereference is fixed and WARN_ON() is not hit anymore in the short lifetime of invalid cls_fw "old-style" filters. [1] https://sashiko.dev/#/patchset/2 ---truncated--- | ||||
| CVE-2026-53079 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net_sched: fix skb memory leak in deferred qdisc drops When the network stack cleans up the deferred list via qdisc_run_end(), it operates on the root qdisc. If the root qdisc do not implement the TCQ_F_DEQUEUE_DROPS flag the packets queue to free are never freed and gets stranded on the child's local to_free list. Fix this by making qdisc_dequeue_drop() aware of the root qdisc. It fetches the root qdisc and check for the TCQ_F_DEQUEUE_DROPS flag. If the flag is present, the packet is appended directly to the root's to_free list. Otherwise, drop it directly as it was done before the optimization was implemented. | ||||
| CVE-2026-53078 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix same-register dst/src OOB read and pointer leak in sock_ops When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg, the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the destination register in the !fullsock / !locked_tcp_sock path. Both macros borrow a temporary register to check is_fullsock / is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with a request_sock), dst_reg should be zeroed but is not, leaving the stale ctx pointer: - SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer, leading to stack-out-of-bounds access in helpers like bpf_skc_to_tcp6_sock(). - SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the verifier believes is a SCALAR_VALUE, leaking a kernel pointer. Fix both macros by: - Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the added instruction. - Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register restore in the !fullsock path, placed after the restore because dst_reg == src_reg means we need src_reg intact to read ctx->temp. | ||||
| CVE-2026-53077 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: Restrict use of RDS/IB to the initial network namespace Prevent using RDS/IB in network namespaces other than the initial one. The existing RDS/IB code will not work properly in non-initial network namespaces. | ||||
| CVE-2026-53076 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix OOB in pcpu_init_value An out-of-bounds read occurs when copying element from a BPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with the same value_size that is not rounded up to 8 bytes. The issue happens when: 1. A CGROUP_STORAGE map is created with value_size not aligned to 8 bytes (e.g., 4 bytes) 2. A pcpu map is created with the same value_size (e.g., 4 bytes) 3. Update element in 2 with data in 1 pcpu_init_value assumes that all sources are rounded up to 8 bytes, and invokes copy_map_value_long to make a data copy, However, the assumption doesn't stand since there are some cases where the source may not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data. the verifier verifies exactly the size that the source claims, not the size rounded up to 8 bytes by kernel, an OOB happens when the source has only 4 bytes while the copy size(4) is rounded up to 8. | ||||
| CVE-2026-53075 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ppp: require CAP_NET_ADMIN in target netns for unattached ioctls /dev/ppp open is currently authorized against file->f_cred->user_ns, while unattached administrative ioctls operate on current->nsproxy->net_ns. As a result, a local unprivileged user can create a new user namespace with CLONE_NEWUSER, gain CAP_NET_ADMIN only in that new user namespace, and still issue PPPIOCNEWUNIT, PPPIOCATTACH, or PPPIOCATTCHAN against an inherited network namespace. Require CAP_NET_ADMIN in the user namespace that owns the target network namespace before handling unattached PPP administrative ioctls. This preserves normal pppd operation in the network namespace it is actually privileged in, while rejecting the userns-only inherited-netns case. | ||||
| CVE-2026-53074 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb bpf_prog_test_run_skb() calls eth_type_trans() first and then uses skb->protocol to initialize sk family and address fields for the test run. For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb) even when the provided test input only contains an Ethernet header. Reject the input earlier if the Ethernet frame carries IPv4/IPv6 EtherType but the L3 header is too short. Fold the IPv4/IPv6 header length checks into the existing protocol switch and return -EINVAL before accessing the network headers. | ||||