Export limit exceeded: 35583 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (35583 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23391 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_CT: drop pending enqueued packets on template removal Templates refer to objects that can go away while packets are sitting in nfqueue refer to: - helper, this can be an issue on module removal. - timeout policy, nfnetlink_cttimeout might remove it. The use of templates with zone and event cache filter are safe, since this just copies values. Flush these enqueued packets in case the template rule gets removed. | ||||
| CVE-2026-23345 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: gcs: Do not set PTE_SHARED on GCS mappings if FEAT_LPA2 is enabled When FEAT_LPA2 is enabled, bits 8-9 of the PTE replace the shareability attribute with bits 50-51 of the output address. The _PAGE_GCS{,_RO} definitions include the PTE_SHARED bits as 0b11 (this matches the other _PAGE_* definitions) but using this macro directly leads to the following panic when enabling GCS on a system/model with LPA2: Unable to handle kernel paging request at virtual address fffff1ffc32d8008 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 52-bit VAs, pgdp=0000000060f4d000 [fffff1ffc32d8008] pgd=100000006184b003, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP CPU: 0 UID: 0 PID: 513 Comm: gcs_write_fault Tainted: G M 7.0.0-rc1 #1 PREEMPT Tainted: [M]=MACHINE_CHECK Hardware name: QEMU QEMU Virtual Machine, BIOS 2025.02-8+deb13u1 11/08/2025 pstate: 03402005 (nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : zap_huge_pmd+0x168/0x468 lr : zap_huge_pmd+0x2c/0x468 sp : ffff800080beb660 x29: ffff800080beb660 x28: fff00000c2058180 x27: ffff800080beb898 x26: fff00000c2058180 x25: ffff800080beb820 x24: 00c800010b600f41 x23: ffffc1ffc30af1a8 x22: fff00000c2058180 x21: 0000ffff8dc00000 x20: fff00000c2bc6370 x19: ffff800080beb898 x18: ffff800080bebb60 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000007 x14: 000000000000000a x13: 0000aaaacbbbffff x12: 0000000000000000 x11: 0000ffff8ddfffff x10: 00000000000001fe x9 : 0000ffff8ddfffff x8 : 0000ffff8de00000 x7 : 0000ffff8da00000 x6 : fff00000c2bc6370 x5 : 0000ffff8da00000 x4 : 000000010b600000 x3 : ffffc1ffc0000000 x2 : fff00000c2058180 x1 : fffff1ffc32d8000 x0 : 000000c00010b600 Call trace: zap_huge_pmd+0x168/0x468 (P) unmap_page_range+0xd70/0x1560 unmap_single_vma+0x48/0x80 unmap_vmas+0x90/0x180 unmap_region+0x88/0xe4 vms_complete_munmap_vmas+0xf8/0x1e0 do_vmi_align_munmap+0x158/0x180 do_vmi_munmap+0xac/0x160 __vm_munmap+0xb0/0x138 vm_munmap+0x14/0x20 gcs_free+0x70/0x80 mm_release+0x1c/0xc8 exit_mm_release+0x28/0x38 do_exit+0x190/0x8ec do_group_exit+0x34/0x90 get_signal+0x794/0x858 arch_do_signal_or_restart+0x11c/0x3e0 exit_to_user_mode_loop+0x10c/0x17c el0_da+0x8c/0x9c el0t_64_sync_handler+0xd0/0xf0 el0t_64_sync+0x198/0x19c Code: aa1603e2 d34cfc00 cb813001 8b011861 (f9400420) Similarly to how the kernel handles protection_map[], use a gcs_page_prot variable to store the protection bits and clear PTE_SHARED if LPA2 is enabled. Also remove the unused PAGE_GCS{,_RO} macros. | ||||
| CVE-2026-23347 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: usb: f81604: correctly anchor the urb in the read bulk callback When submitting an urb, that is using the anchor pattern, it needs to be anchored before submitting it otherwise it could be leaked if usb_kill_anchored_urbs() is called. This logic is correctly done elsewhere in the driver, except in the read bulk callback so do that here also. | ||||
| CVE-2008-7101 | 1 Dnnsoftware | 1 Dotnetnuke | 2026-04-24 | N/A |
| Unspecified vulnerability in DotNetNuke 4.0 through 4.8.4 and 5.0 allows remote attackers to obtain sensitive information (portal number) by accessing the install wizard page via unknown vectors. | ||||
| CVE-2008-7100 | 1 Dnnsoftware | 1 Dotnetnuke | 2026-04-24 | N/A |
| Unspecified vulnerability in DotNetNuke 4.4.1 through 4.8.4 allows remote authenticated users to bypass authentication and gain privileges via unknown vectors related to a "unique id" for user actions and improper validation of a "user identity." | ||||
| CVE-2008-6542 | 1 Dnnsoftware | 1 Dotnetnuke | 2026-04-24 | N/A |
| Unspecified vulnerability in the Skin Manager in DotNetNuke before 4.8.2 allows remote authenticated administrators to perform "server-side execution of application logic" by uploading a static file that is converted into a dynamic script via unknown vectors related to HTM or HTML files. | ||||
| CVE-2026-23370 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data set_new_password() hex dumps the entire buffer, which contains plaintext password data, including current and new passwords. Remove the hex dump to avoid leaking credentials. | ||||
| CVE-2026-23372 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: rawsock: cancel tx_work before socket teardown In rawsock_release(), cancel any pending tx_work and purge the write queue before orphaning the socket. rawsock_tx_work runs on the system workqueue and calls nfc_data_exchange which dereferences the NCI device. Without synchronization, tx_work can race with socket and device teardown when a process is killed (e.g. by SIGKILL), leading to use-after-free or leaked references. Set SEND_SHUTDOWN first so that if tx_work is already running it will see the flag and skip transmitting, then use cancel_work_sync to wait for any in-progress execution to finish, and finally purge any remaining queued skbs. | ||||
| CVE-2026-23373 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: Don't default to -EOPNOTSUPP in rsi_mac80211_config This triggers a WARN_ON in ieee80211_hw_conf_init and isn't the expected behavior from the driver - other drivers default to 0 too. | ||||
| CVE-2026-23376 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-fcloop: Check remoteport port_state before calling done callback In nvme_fc_handle_ls_rqst_work, the lsrsp->done callback is only set when remoteport->port_state is FC_OBJSTATE_ONLINE. Otherwise, the nvme_fc_xmt_ls_rsp's LLDD call to lport->ops->xmt_ls_rsp is expected to fail and the nvme-fc transport layer itself will directly call nvme_fc_xmt_ls_rsp_free instead of relying on LLDD's done callback to free the lsrsp resources. Update the fcloop_t2h_xmt_ls_rsp routine to check remoteport->port_state. If online, then lsrsp->done callback will free the lsrsp. Else, return -ENODEV to signal the nvme-fc transport to handle freeing lsrsp. | ||||
| CVE-2026-23416 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mseal: update VMA end correctly on merge Previously we stored the end of the current VMA in curr_end, and then upon iterating to the next VMA updated curr_start to curr_end to advance to the next VMA. However, this doesn't take into account the fact that a VMA might be updated due to a merge by vma_modify_flags(), which can result in curr_end being stale and thus, upon setting curr_start to curr_end, ending up with an incorrect curr_start on the next iteration. Resolve the issue by setting curr_end to vma->vm_end unconditionally to ensure this value remains updated should this occur. While we're here, eliminate this entire class of bug by simply setting const curr_[start/end] to be clamped to the input range and VMAs, which also happens to simplify the logic. | ||||
| CVE-2026-23417 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix constant blinding for PROBE_MEM32 stores BPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by bpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to survive unblinded into JIT-compiled native code when bpf_jit_harden >= 1. The root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM to BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification, before bpf_jit_blind_constants() runs during JIT compilation. The blinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not BPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through unblinded. Add BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the existing BPF_ST|BPF_MEM cases. The blinding transformation is identical: load the blinded immediate into BPF_REG_AX via mov+xor, then convert the immediate store to a register store (BPF_STX). The rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so the architecture JIT emits the correct arena addressing (R12-based on x86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes BPF_MEM mode; construct the instruction directly instead. | ||||
| CVE-2026-23421 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/configfs: Free ctx_restore_mid_bb in release ctx_restore_mid_bb memory is allocated in wa_bb_store(), but xe_config_device_release() only frees ctx_restore_post_bb. Free ctx_restore_mid_bb[0].cs as well to avoid leaking the allocation when the configfs device is removed. (cherry picked from commit a235e7d0098337c3f2d1e8f3610c719a589e115f) | ||||
| CVE-2026-23395 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ Currently the code attempts to accept requests regardless of the command identifier which may cause multiple requests to be marked as pending (FLAG_DEFER_SETUP) which can cause more than L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer causing an overflow. The spec is quite clear that the same identifier shall not be used on subsequent requests: 'Within each signaling channel a different Identifier shall be used for each successive request or indication.' https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d So this attempts to check if there are any channels pending with the same identifier and rejects if any are found. | ||||
| CVE-2026-31788 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: restrict usage in unprivileged domU The Xen privcmd driver allows to issue arbitrary hypercalls from user space processes. This is normally no problem, as access is usually limited to root and the hypervisor will deny any hypercalls affecting other domains. In case the guest is booted using secure boot, however, the privcmd driver would be enabling a root user process to modify e.g. kernel memory contents, thus breaking the secure boot feature. The only known case where an unprivileged domU is really needing to use the privcmd driver is the case when it is acting as the device model for another guest. In this case all hypercalls issued via the privcmd driver will target that other guest. Fortunately the privcmd driver can already be locked down to allow only hypercalls targeting a specific domain, but this mode can be activated from user land only today. The target domain can be obtained from Xenstore, so when not running in dom0 restrict the privcmd driver to that target domain from the beginning, resolving the potential problem of breaking secure boot. This is XSA-482 --- V2: - defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich) - wait in open() if target domain isn't known yet - issue message in case no target domain found (Jan Beulich) | ||||
| CVE-2026-23401 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE When installing an emulated MMIO SPTE, do so *after* dropping/zapping the existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was right about it being impossible to convert a shadow-present SPTE to an MMIO SPTE due to a _guest_ write, it failed to account for writes to guest memory that are outside the scope of KVM. E.g. if host userspace modifies a shadowed gPTE to switch from a memslot to emulted MMIO and then the guest hits a relevant page fault, KVM will install the MMIO SPTE without first zapping the shadow-present SPTE. ------------[ cut here ]------------ is_shadow_present_pte(*sptep) WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292 Modules linked in: kvm_intel kvm irqbypass CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm] Call Trace: <TASK> mmu_set_spte+0x237/0x440 [kvm] ept_page_fault+0x535/0x7f0 [kvm] kvm_mmu_do_page_fault+0xee/0x1f0 [kvm] kvm_mmu_page_fault+0x8d/0x620 [kvm] vmx_handle_exit+0x18c/0x5a0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm] kvm_vcpu_ioctl+0x2d5/0x980 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb5/0x730 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x47fa3f </TASK> ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-23402 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Only WARN in direct MMUs when overwriting shadow-present SPTE Adjust KVM's sanity check against overwriting a shadow-present SPTE with a another SPTE with a different target PFN to only apply to direct MMUs, i.e. only to MMUs without shadowed gPTEs. While it's impossible for KVM to overwrite a shadow-present SPTE in response to a guest write, writes from outside the scope of KVM, e.g. from host userspace, aren't detected by KVM's write tracking and so can break KVM's shadow paging rules. ------------[ cut here ]------------ pfn != spte_to_pfn(*sptep) WARNING: arch/x86/kvm/mmu/mmu.c:3069 at mmu_set_spte+0x1e4/0x440 [kvm], CPU#0: vmx_ept_stale_r/872 Modules linked in: kvm_intel kvm irqbypass CPU: 0 UID: 1000 PID: 872 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:mmu_set_spte+0x1e4/0x440 [kvm] Call Trace: <TASK> ept_page_fault+0x535/0x7f0 [kvm] kvm_mmu_do_page_fault+0xee/0x1f0 [kvm] kvm_mmu_page_fault+0x8d/0x620 [kvm] vmx_handle_exit+0x18c/0x5a0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm] kvm_vcpu_ioctl+0x2d5/0x980 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb5/0x730 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2020-21048 | 1 Saitoha | 1 Libsixel | 2026-04-24 | 6.5 Medium |
| An issue in the dither.c component of libsixel prior to v1.8.4 allows attackers to cause a denial of service (DOS) via a crafted PNG file. | ||||
| CVE-2023-4378 | 1 Gitlab | 1 Gitlab | 2026-04-24 | 5.5 Medium |
| An issue has been discovered in GitLab CE/EE affecting all versions starting from 11.8 before 16.1.5, all versions starting from 16.2 before 16.2.5, all versions starting from 16.3 before 16.3.1. A malicious Maintainer can, under specific circumstances, leak the sentry token by changing the configured URL in the Sentry error tracking settings page. This was as a result of an incomplete fix for CVE-2022-4365. | ||||
| CVE-2026-23338 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: Do not allow userspace to trivially triger kernel warnings Userspace can either deliberately pass in the too small num_fences, or the required number can legitimately grow between the two calls to the userq wait ioctl. In both cases we do not want the emit the kernel warning backtrace since nothing is wrong with the kernel and userspace will simply get an errno reported back. So lets simply drop the WARN_ONs. (cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c) | ||||