Export limit exceeded: 378610 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378610 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378610 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74542 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio_queue ENOMEM in writeback by adding a mempool Fix the handling of folio_queue allocation failure in writeback by adding a mempool and passing in gfp_t flags to the rolling buffer functions that allocate memory, using the mempool if gfp != GFP_KERNEL. This is then extended upwards and the gfp to be used for a request is stored in the netfs_io_request struct and is then used for both requests and subrequests, eliminating the sleeping loops there. The failure caused: folio != NULL WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 fs/netfs/write_issue.c:603, CPU#3: syz.0.17/5919 | ||||
| CVE-2026-74552 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Only report alarms if driver is ready Userspace can read sysfs attributes before driver registration is complete, immediately after devm_hwmon_device_register_with_info() has been called. At that time, data->hwmon_dev is not yet initialized. This can trigger a NULL pointer access since lm90_update_device() and with it lm90_update_alarms_locked() will be called. This call schedules report_work and lm90_report_alarms(), which passes the still-NULL data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer dereference. Fix the problem by only scheduling the report and alert workers data->hwmon_dev is set. | ||||
| CVE-2026-74504 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix division by zero in initialize_timer() A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set the backing snd_timer's hardware resolution to an arbitrary 64-bit value via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero. When such a timer is bound to a sequencer queue, initialize_timer() computes the tick period as tmr->ticks = 1000000000 / (r * freq); where r is that user-controlled resolution and freq is the sequencer update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250). A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for any even freq, including DEFAULT_FREQUENCY (1000), so the division faults with a divide-by-zero. The division runs under tmr->lock with interrupts disabled, so the oops leaves the spinlock held and hangs the CPU. It is reachable by an unprivileged user with access to /dev/snd/timer and /dev/snd/seq. Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+ RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0 snd_seq_timer_start+0x15e/0x2b0 snd_seq_control_queue+0x56f/0xba0 snd_seq_write+0x3e0/0x730 Reject an overflowing product with check_mul_overflow() and fall back to a single tick, which also avoids feeding a wrapped-but-nonzero divisor (e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small value) into the period computation. | ||||
| CVE-2026-74505 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: Fix UAF at error handling during probe Although 6fire driver had a few fixes for dealing with the early error handling during the probe phase, it forgot a pending URB before freeing the resources, which may lead to a UAF. This patch addresses it by doing the almost same cleanup procedure like the normal disconnect phase at the error path. | ||||
| CVE-2026-74555 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path. | ||||
| CVE-2026-74559 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: drain continuation descs after overflow in xsk_build_skb() Fix generic xmit path multi-buffer logic when packets are either too big (count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is included in fragmented packet. Introduce xdp_sock::drain_cont and act upon this flag - when it is set, keep on consuming descriptors from AF_XDP Tx ring and put them directly onto Cq. Previously these descriptors were silently lost and could never be reached again. | ||||
| CVE-2026-74566 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: keys: make keyring key-chunk byte order agree with keyring_diff_objects() keyring_get_key_chunk() loads description bytes into the index chunk low address first, while keyring_diff_objects() numbers the first differing bit from the low end and folds the absolute byte index into the level without removing the inline-prefix offset the level already carries. The two disagree on byte order and bit position, so the array can be told two keys first differ at a bit that does not differ in the chunk the walker uses, letting crafted descriptions collide into one node. Load the chunk in the order keyring_diff_objects() assumes and drop the inline-prefix length when folding the byte index into the level. This only changes the in-memory ordering used to place keys within a keyring; add, search and read of non-colliding keys are unaffected. | ||||
| CVE-2026-74526 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix potential deadlock in mpi3mr_fault_uevent_emit mpi3mr_fault_uevent_emit() runs from the fault watchdog and reset paths where host I/O may already be blocked. GFP_KERNEL allocations here, both the local kzalloc_obj() and the ones inside kobject_uevent_env() itself, can trigger reclaim that waits on that blocked I/O and deadlock. Use memalloc_noio_save()/restore() to cover the whole call instead of just the local allocation. | ||||
| CVE-2026-74532 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Validate length before parsing diagnostics TLV btintel_diagnostics() accesses tlv->val[0] without first validating that the diagnostics VSE is long enough to contain that field, so may cause reading data beyond the received frame. Fix by validating the length before access. | ||||
| CVE-2026-74455 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: validate uCAN receive record lengths pcan_usb_fd_decode_buf() walks uCAN records packed in one USB receive buffer. Require each record to contain the fixed header for its type, and verify CAN payload bytes before copying them into the skb. | ||||
| CVE-2026-74458 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents The wait and bulk receive paths walk variable-length commands from a USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be dispatched, and the wait path copies a matching command into a fixed caller-owned struct kvaser_cmd using the device-provided length. Reject nonzero commands that do not contain the fixed header or that extend beyond the current USB buffer item. In the wait path, also reject a matching command that exceeds the destination before copying it. | ||||
| CVE-2026-74462 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: mark I2C adapter when hardware is powered down On some i.MX platforms, certain I2C client drivers keep a periodic workqueue which continues to trigger I2C transfers. During system suspend/resume, there exists a time window between: - suspend_noirq and the system entering suspend - the system starting to resume and resume_noirq In this window, the I2C controller resources such as clock and pinctrl may already be disabled or not yet restored. If a workqueue triggers an I2C transfer in this period, the driver attempts to access I2C registers while the hardware resources are unavailable, which may lead to system hang. Mark the I2C adapter as suspended during noirq suspend and block new transfers until resume, ensuring that I2C transfers are only issued when hardware resources are available. | ||||
| CVE-2026-74464 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko. | ||||
| CVE-2026-74466 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used. | ||||
| CVE-2026-74546 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read If the fan data becomes 0 between the FAN_DATA_VALID() check and the FAN_PERIOD_TO_RPM() conversion, it will result in a divide-by-zero crash due to a race with a concurrent update of the cached fan value. Fix a TOCTOU issue by reading fan data once. | ||||
| CVE-2026-74547 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread When userspace configures 'auto_update_interval' to 0 via sysfs, the background kthread executes schedule_timeout_interruptible(0), which returns immediately. If 'num_temp_sensors' is concurrently or previously set to 0, the msleep_interruptible() delay inside adt7470_read_temperatures() also becomes 0. This combination forces the background thread into a tight, unbounded busy-loop, hogging the CPU and flooding the I2C bus with a continuous stream of transactions. Fix this vulnerability by raising the lower limit of the clamp_val in auto_update_interval_store() from 0 to 500 milliseconds. This guarantees a reasonable minimum sleep window between sensor updates, protecting the system from intentional or accidental I2C bus denial of service. | ||||
| CVE-2026-19896 | 1 Mangroup | 1 Dtale | 2026-08-15 | 3.7 Low |
| A flaw has been found in mangroup dtale up to 3.22.0. This vulnerability affects the function build_secret_key of the file dtale/app.py of the component Flask Session Cookie. This manipulation causes insufficiently random values. Remote exploitation of the attack is possible. The attack's complexity is rated as high. It is stated that the exploitability is difficult. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-74468 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: pch: use raw_spinlock_t for the register lock pch_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. This was confirmed on a PREEMPT_RT kernel with lockdep (PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLEEP). A grounded PoC mirrored pch_irq_type()'s locking and drove it through the real genirq carrier irq_set_irq_type() -> __irq_set_trigger() -> chip->irq_set_type(), i.e. the same __irq_set_trigger() edge that __setup_irq() takes for a requested IRQ. With the original spin_lock_irqsave() edge lockdep reported an invalid wait context, immediately followed by: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 95, name: insmod hardirqs last disabled at (3784): _raw_spin_lock_irqsave+0x4f/0x60 rt_spin_lock+0x3a/0x1c0 repro_irq_set_type+0x64/0xa0 [pch_repro] __irq_set_trigger+0x69/0x140 irq_set_irq_type+0x78/0xd0 Switching the mirrored lock to raw_spinlock_t made both splats go away. Convert the register lock to raw_spinlock_t. The same lock also serializes the GPIO direction/value callbacks and the suspend/resume register save/restore, but all of those critical sections only perform MMIO register accesses (ioread32()/iowrite32()) and irq_set_handler_locked(); none of them contain sleepable operations. Keeping this register lock non-sleeping is therefore appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. This is the same class of issue and fix as recently addressed for other GPIO controllers, e.g. commit 286533cb14a3 ("gpio: sch: use raw_spinlock_t in the irq startup path") and commit 90f0109019e6 ("gpio: eic-sprd: use raw_spinlock_t in the irq startup path"). | ||||
| CVE-2026-74472 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ublk: reset kernel-owned dev_info fields in ublk_ctrl_add_dev() ublk_ctrl_add_dev() memcpy()s the userspace ublksrv_ctrl_dev_info into ub->dev_info and then fixes up the fields the driver owns, but misses ->state and ->ublksrv_pid. A device added with ->state = UBLK_S_DEV_LIVE passes the "->state != UBLK_S_DEV_DEAD" test that ublk_stop_dev_unlocked() uses as its proxy for "a disk is attached", while ->ub_disk is still NULL, so DEL_DEV right after ADD_DEV oopses in del_gendisk(). UBLK_S_DEV_QUIESCED plus UBLK_F_USER_RECOVERY dies one step earlier, in ublk_force_abort_dev(). A poisoned ->state also gets START_USER_RECOVERY and the char device read/write path onto a device that was never started, and wedges START_DEV at -EEXIST. A poisoned ->ublksrv_pid just makes GET_DEV_INFO report an unrelated task as the ublk server. Reset both after the memcpy(), as ublk_detach_disk() does. Userspace only ever reads these back, so correcting them silently breaks nothing. ADD_DEV has copied ->state in unsanitized since ublk was merged, but back then it was harmless: the gendisk was allocated during ADD_DEV, and both teardown and the START_DEV -EEXIST check keyed off disk_live() rather than ->state. The oops became reachable once the disk allocation moved to START_DEV and those checks switched to ->state. | ||||
| CVE-2026-74483 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't leak the user namespace when the mount fails bm_get_tree() takes a reference to the user namespace and hands it to get_tree_keyed() as the sget key. sget_fc() moves that reference into sb->s_fs_info and clears fc->s_fs_info, so from that point on the superblock owns it and bm_free() doesn't see it anymore. The superblock drops it in ->put_super(). But generic_shutdown_super() only calls ->put_super() from inside the if (sb->s_root) branch, so nothing releases it when bm_fill_super() fails: - The kzalloc_obj() failure leaves s_root NULL and the whole branch is skipped. - A simple_fill_super() failure in the file loop leaves s_root set, but s_op still points at simple_super_operations, which has no ->put_super(). bm_fill_super() installs s_ops only once simple_fill_super() returned success, and installing it earlier wouldn't help either because simple_fill_super() overwrites s_op. Either way vfs_get_super() calls deactivate_locked_super() and the reference is gone for good. binfmt_misc mounts are available in a user namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so an unprivileged caller under a tight memory cgroup can fail simple_fill_super() on demand and leak one user namespace per attempt. Drop the reference in ->kill_sb() instead, which runs unconditionally, the same way nfsd and rpc_pipefs release their keyed s_fs_info. That also stops ->put_super() from clearing s_fs_info while the superblock is still on @fs_supers. generic_shutdown_super() leaves it there on purpose so that sget_fc() keeps finding it until kill_sb() has run, but a NULL s_fs_info makes test_keyed_super() miss it, so a concurrent mount for the same user namespace skips the grab_super() wait and creates a second superblock for a namespace that is still being torn down. | ||||