Export limit exceeded: 19636 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (19636 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46041 | 1 Linux | 1 Linux Kernel | 2026-06-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: greybus: gb-beagleplay: fix sleep in atomic context in hdlc_tx_frames() hdlc_append() calls usleep_range() to wait for circular buffer space, but it is called with tx_producer_lock (a spinlock) held via hdlc_tx_frames() -> hdlc_append_tx_frame()/hdlc_append_tx_u8()/etc. Sleeping while holding a spinlock is illegal and can trigger "BUG: scheduling while atomic". Fix this by moving the buffer-space wait out of hdlc_append() and into hdlc_tx_frames(), before the spinlock is acquired. The new flow: 1. Pre-calculate the worst-case encoded frame length. 2. Wait (with sleep) outside the lock until enough space is available, kicking the TX consumer work to drain the buffer. 3. Acquire the spinlock, re-verify space, and write the entire frame atomically. This ensures that sleeping only happens without any lock held, and that frames are either fully enqueued or not written at all. This bug is found by CodeQL static analysis tool (interprocedural sleep-in-atomic query) and my code review. | ||||
| CVE-2026-46051 | 1 Linux | 1 Linux Kernel | 2026-06-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix soft lockup in retry_aligned_read() When retry_aligned_read() encounters an overlapped stripe, it releases the stripe via raid5_release_stripe() which puts it on the lockless released_stripes llist. In the next raid5d loop iteration, release_stripe_list() drains the stripe onto handle_list (since STRIPE_HANDLE is set by the original IO), but retry_aligned_read() runs before handle_active_stripes() and removes the stripe from handle_list via find_get_stripe() -> list_del_init(). This prevents handle_stripe() from ever processing the stripe to resolve the overlap, causing an infinite loop and soft lockup. Fix this by using __release_stripe() with temp_inactive_list instead of raid5_release_stripe() in the failure path, so the stripe does not go through the released_stripes llist. This allows raid5d to break out of its loop, and the overlap will be resolved when the stripe is eventually processed by handle_stripe(). | ||||
| CVE-2026-46007 | 1 Linux | 1 Linux Kernel | 2026-06-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (powerz) Avoid cacheline sharing for DMA buffer Depending on the architecture the transfer buffer may share a cacheline with the following mutex. As the buffer may be used for DMA, that is problematic. Use the high-level DMA helpers to make sure that cacheline sharing can not happen. Also drop the comment, as the helpers are documentation enough. https://sashiko.dev/#/message/20260408175814.934BFC19421%40smtp.kernel.org | ||||
| CVE-2026-46009 | 1 Linux | 1 Linux Kernel | 2026-06-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-ntb: Remove duplicate resource teardown epf_ntb_epc_destroy() duplicates the teardown that the caller is supposed to do later. This leads to an oops when .allow_link fails or when .drop_link is performed. Remove the helper. Also drop pci_epc_put(). EPC device refcounting is tied to configfs EPC group lifetime, and pci_epc_put() in the .drop_link path is sufficient. | ||||
| CVE-2026-43122 | 1 Linux | 1 Linux Kernel | 2026-06-17 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-43423 | 1 Linux | 1 Linux Kernel | 2026-06-17 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-43422 | 1 Linux | 1 Linux Kernel | 2026-06-17 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2025-38553 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-31688 | 1 Linux | 1 Linux Kernel | 2026-06-17 | 7.8 High |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-23243 | 1 Linux | 1 Linux Kernel | 2026-06-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/umad: Reject negative data_len in ib_umad_write ib_umad_write computes data_len from user-controlled count and the MAD header sizes. With a mismatched user MAD header size and RMPP header length, data_len can become negative and reach ib_create_send_mad(). This can make the padding calculation exceed the segment size and trigger an out-of-bounds memset in alloc_send_rmpp_list(). Add an explicit check to reject negative data_len before creating the send buffer. KASAN splat: [ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0 [ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102 [ 211.365867] ib_create_send_mad+0xa01/0x11b0 [ 211.365887] ib_umad_write+0x853/0x1c80 | ||||
| CVE-2026-31456 | 1 Linux | 1 Linux Kernel | 2026-06-17 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/pagewalk: fix race between concurrent split and refault The splitting of a PUD entry in walk_pud_range() can race with a concurrent thread refaulting the PUD leaf entry causing it to try walking a PMD range that has disappeared. An example and reproduction of this is to try reading numa_maps of a process while VFIO-PCI is setting up DMA (specifically the vfio_pin_pages_remote call) on a large BAR for that process. This will trigger a kernel BUG: vfio-pci 0000:03:00.0: enabling device (0000 -> 0002) BUG: unable to handle page fault for address: ffffa23980000000 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI ... RIP: 0010:walk_pgd_range+0x3b5/0x7a0 Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24 28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06 9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74 RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287 RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0 RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000 R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000 R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000 FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> __walk_page_range+0x195/0x1b0 walk_page_vma+0x62/0xc0 show_numa_map+0x12b/0x3b0 seq_read_iter+0x297/0x440 seq_read+0x11d/0x140 vfs_read+0xc2/0x340 ksys_read+0x5f/0xe0 do_syscall_64+0x68/0x130 ? get_page_from_freelist+0x5c2/0x17e0 ? mas_store_prealloc+0x17e/0x360 ? vma_set_page_prot+0x4c/0xa0 ? __alloc_pages_noprof+0x14e/0x2d0 ? __mod_memcg_lruvec_state+0x8d/0x140 ? __lruvec_stat_mod_folio+0x76/0xb0 ? __folio_mod_stat+0x26/0x80 ? do_anonymous_page+0x705/0x900 ? __handle_mm_fault+0xa8d/0x1000 ? __count_memcg_events+0x53/0xf0 ? handle_mm_fault+0xa5/0x360 ? do_user_addr_fault+0x342/0x640 ? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0 ? irqentry_exit_to_user_mode+0x24/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fe88464f47e Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28 RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003 RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000 R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 </TASK> Fix this by validating the PUD entry in walk_pmd_range() using a stable snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the walk via ACTION_AGAIN instead of descending further. This mirrors the retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the PTE is not being got by pte_offset_map_lock(). | ||||
| CVE-2026-46173 | 1 Linux | 1 Linux Kernel | 2026-06-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exit: prevent preemption of oopsing TASK_DEAD task When an already-exiting task oopses, make_task_dead() currently calls do_task_dead() with preemption enabled. That is forbidden: do_task_dead() calls __schedule(), which has a comment saying "WARNING: must be called with preemption disabled!". If an oopsing task is preempted in do_task_dead(), between becoming TASK_DEAD and entering the scheduler explicitly, bad things happen: finish_task_switch() assumes that once the scheduler has switched away from a TASK_DEAD task, the task can never run again and its stack is no longer needed; but that assumption apparently doesn't hold if the dead task was preempted (the SM_PREEMPT case). This means that the scheduler ends up repeatedly dropping references on the dead task's stack, which can lead to use-after-free or double-free of the entire task stack; in other words, two tasks can end up running on the same stack, resulting in various kinds of memory corruption. (This does not just affect "recursively oopsing" tasks; it is enough to oops once during task exit, for example in a file_operations::release handler) | ||||
| CVE-2026-45979 | 1 Linux | 1 Linux Kernel | 2026-06-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: clean up the amdgpu_cs_parser_bos In low memory conditions, kmalloc can fail. In such conditions unlock the mutex for a clean exit. We do not need to amdgpu_bo_list_put as it's been handled in the amdgpu_cs_parser_fini. | ||||
| CVE-2026-45958 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: fix to avoid directly dereferencing user pointer In vidi_connection_ioctl(), vidi->edid(user pointer) is directly dereferenced in the kernel. This allows arbitrary kernel memory access from the user space, so instead of directly accessing the user pointer in the kernel, we should modify it to copy edid to kernel memory using copy_from_user() and use it. | ||||
| CVE-2026-45960 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: return error when node already exists in hfs_bnode_create When hfs_bnode_create() finds that a node is already hashed (which should not happen in normal operation), it currently returns the existing node without incrementing its reference count. This causes a reference count inconsistency that leads to a kernel panic when the node is later freed in hfs_bnode_put(): kernel BUG at fs/hfsplus/bnode.c:676! BUG_ON(!atomic_read(&node->refcnt)) This scenario can occur when hfs_bmap_alloc() attempts to allocate a node that is already in use (e.g., when node 0's bitmap bit is incorrectly unset), or due to filesystem corruption. Returning an existing node from a create path is not normal operation. Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's already hashed. This properly signals the error condition to callers, which already check for IS_ERR() return values. | ||||
| CVE-2026-5904 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-16 | 8.8 High |
| Determined a bug and not a vulnerability | ||||
| CVE-2026-3539 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-16 | 8.8 High |
| Determined a bug and not a vulnerability | ||||
| CVE-2026-7936 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-16 | 4.3 Medium |
| Determined not a vulnerability | ||||
| CVE-2026-22990 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: replace overzealous BUG_ON in osdmap_apply_incremental() If the osdmap is (maliciously) corrupted such that the incremental osdmap epoch is different from what is expected, there is no need to BUG. Instead, just declare the incremental osdmap to be invalid. | ||||
| CVE-2026-22998 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec Commit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length") added ttag bounds checking and data_offset validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate whether the command's data structures (cmd->req.sg and cmd->iov) have been properly initialized before processing H2C_DATA PDUs. The nvmet_tcp_build_pdu_iovec() function dereferences these pointers without NULL checks. This can be triggered by sending H2C_DATA PDU immediately after the ICREQ/ICRESP handshake, before sending a CONNECT command or NVMe write command. Attack vectors that trigger NULL pointer dereferences: 1. H2C_DATA PDU sent before CONNECT → both pointers NULL 2. H2C_DATA PDU for READ command → cmd->req.sg allocated, cmd->iov NULL 3. H2C_DATA PDU for uninitialized command slot → both pointers NULL The fix validates both cmd->req.sg and cmd->iov before calling nvmet_tcp_build_pdu_iovec(). Both checks are required because: - Uninitialized commands: both NULL - READ commands: cmd->req.sg allocated, cmd->iov NULL - WRITE commands: both allocated | ||||