Export limit exceeded: 80134 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (80134 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43260 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix RSS context delete logic We need to free the corresponding RSS context VNIC in FW everytime an RSS context is deleted in driver. Commit 667ac333dbb7 added a check to delete the VNIC in FW only when netif_running() is true to help delete RSS contexts with interface down. Having that condition will make the driver leak VNICs in FW whenever close() happens with active RSS contexts. On the subsequent open(), as part of RSS context restoration, we will end up trying to create extra VNICs for which we did not make any reservation. FW can fail this request, thereby making us lose active RSS contexts. Suppose an RSS context is deleted already and we try to process a delete request again, then the HWRM functions will check for validity of the request and they simply return if the resource is already freed. So, even for delete-when-down cases, netif_running() check is not necessary. Remove the netif_running() condition check when deleting an RSS context. | ||||
| CVE-2026-43466 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: <IRQ> ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 | ||||
| CVE-2026-44400 | 2026-05-08 | 8.1 High | ||
| MailEnable Enterprise Premium 10.55 and earlier contains an improper authorization vulnerability in the WebAdmin mobile portal that allows attackers to bypass authentication checks by reusing AuthenticationToken cookies generated for low-privileged users. Attackers can obtain a token from the WebMail login endpoint using the PersistentLogin parameter and replay it against the WebAdmin portal to perform highly privileged administrative actions. | ||||
| CVE-2024-12251 | 1 Telerik | 1 Ui For Winui | 2026-05-08 | 7.8 High |
| In Progress Telerik UI for WinUI versions prior to 2025 Q1 (3.0.0), a command injection attack is possible through improper neutralization of hyperlink elements. | ||||
| CVE-2026-6659 | 2026-05-08 | 7.5 High | ||
| Crypt::PasswdMD5 versions through 1.42 for Perl generates insecure random values for salts. The built-in rand function is predictable, and unsuitable for cryptography. | ||||
| CVE-2024-53326 | 2026-05-08 | 7.3 High | ||
| LINQPad before 5.52.01 Pro edition is vulnerable to Unsafe Deserialization in LINQPad.AutoRefManager::PopulateFromCache(), leading to code execution. | ||||
| CVE-2026-8090 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-08 | 7.3 High |
| Use-after-free in the DOM: Networking component. This vulnerability was fixed in Firefox 150.0.2, Firefox ESR 140.10.2, Firefox ESR 115.35.2, Thunderbird 150.0.2, and Thunderbird 140.10.2. | ||||
| CVE-2026-42501 | 2026-05-08 | 7.5 High | ||
| A malicious module proxy can exploit a flaw in the go command's validation of module checksums to bypass checksum database validation. This vulnerability affects any user using an untrusted module proxy (GOMODPROXY) or checksum database (GOSUMDB). A malicious module proxy can serve altered versions of the Go toolchain. When selecting a different version of the Go toolchain than the currently installed toolchain (due to the GOTOOLCHAIN environment variable, or a go.work or go.mod with a toolchain line), the go command will download and execute a toolchain provided by the module proxy. A malicious module proxy can bypass checksum database validation for this downloaded toolchain. Since this vulnerability affects the security of toolchain downloads, setting GOTOOLCHAIN to a fixed version is not sufficient. You must upgrade your base Go toolchain. The go tool always validates the hash of a toolchain before executing it, so fixed versions will refuse to execute any cached, altered versions of the toolchain. The go tool trusts go.sum files to contain accurate hashes of the current module's dependencies. A malicious proxy exploiting this vulnerability to serve an altered module will have caused an incorrect hash to be recorded in the go.sum. Users who have configured a non-trusted GOPROXY can determine if they have been affected by running "rm go.sum ; go mod tidy ; go mod verify", which will revalidate all dependencies of the current module. The specific flaw in more detail: The go command consults the checksum database to validate downloaded modules, when a module is not listed in the go.sum file. It verifies that the module hash reported by the checksum database matches the hash of the downloaded module. If, however, the checksum database returns a successful response that contains no entry for the module, the go command incorrectly permitted validation to succeed. A module proxy may mirror or proxy the checksum database, in which case the go command will not connect to the checksum database directly. Checksums reported by the checksum database are cryptographically signed, so a malicious proxy cannot alter the reported checksum for a module. However, a proxy which returns an empty checksum response, or a checksum response for an unrelated module, could cause the go command to proceed as if a downloaded module has been validated. | ||||
| CVE-2022-26522 | 2026-05-08 | 7.8 High | ||
| The socket connection handler in aswArPot.sys in the Avast and AVG Windows Anti Rootkit driver before 22.1 allows local attackers to execute arbitrary code in kernel mode or cause a denial of service (memory corruption and OS crash) due to a double fetch vulnerability at aswArPot+0xc4a3. | ||||
| CVE-2026-43427 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: class: cdc-wdm: fix reordering issue in read code path Quoting the bug report: Due to compiler optimization or CPU out-of-order execution, the desc->length update can be reordered before the memmove. If this happens, wdm_read() can see the new length and call copy_to_user() on uninitialized memory. This also violates LKMM data race rules [1]. Fix it by using WRITE_ONCE and memory barriers. | ||||
| CVE-2026-43456 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix type confusion in bond_setup_by_slave() kernel BUG at net/core/skbuff.c:2306! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306 RSP: 0018:ffffc90004aff760 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900 RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000 R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780 R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0 Call Trace: <TASK> ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900 dev_hard_header include/linux/netdevice.h:3439 [inline] packet_snd net/packet/af_packet.c:3028 [inline] packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa54/0xc30 net/socket.c:2592 ___sys_sendmsg+0x190/0x1e0 net/socket.c:2646 __sys_sendmsg+0x170/0x220 net/socket.c:2678 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe1a0e6c1a9 When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond, bond_setup_by_slave() directly copies the slave's header_ops to the bond device: bond_dev->header_ops = slave_dev->header_ops; This causes a type confusion when dev_hard_header() is later called on the bond device. Functions like ipgre_header(), ip6gre_header(),all use netdev_priv(dev) to access their device-specific private data. When called with the bond device, netdev_priv() returns the bond's private data (struct bonding) instead of the expected type (e.g. struct ip_tunnel), leading to garbage values being read and kernel crashes. Fix this by introducing bond_header_ops with wrapper functions that delegate to the active slave's header_ops using the slave's own device. This ensures netdev_priv() in the slave's header functions always receives the correct device. The fix is placed in the bonding driver rather than individual device drivers, as the root cause is bond blindly inheriting header_ops from the slave without considering that these callbacks expect a specific netdev_priv() layout. The type confusion can be observed by adding a printk in ipgre_header() and running the following commands: ip link add dummy0 type dummy ip addr add 10.0.0.1/24 dev dummy0 ip link set dummy0 up ip link add gre1 type gre local 10.0.0.1 ip link add bond1 type bond mode active-backup ip link set gre1 master bond1 ip link set gre1 up ip link set bond1 up ip addr add fe80::1/64 dev bond1 | ||||
| CVE-2026-43463 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc, afs: Fix missing error pointer check after rxrpc_kernel_lookup_peer() rxrpc_kernel_lookup_peer() can also return error pointers in addition to NULL, so just checking for NULL is not sufficient. Fix this by: (1) Changing rxrpc_kernel_lookup_peer() to return -ENOMEM rather than NULL on allocation failure. (2) Making the callers in afs use IS_ERR() and PTR_ERR() to pass on the error code returned. | ||||
| CVE-2026-43110 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: validate bsscfg indices in IF events brcmf_fweh_handle_if_event() validates the firmware-provided interface index before it touches drvr->iflist[], but it still uses the raw bsscfgidx field as an array index without a matching range check. Reject IF events whose bsscfg index does not fit in drvr->iflist[] before indexing the interface array. [add missing wifi prefix] | ||||
| CVE-2026-8126 | 2026-05-08 | 7.3 High | ||
| A flaw has been found in SourceCodester Comment System 1.0. This issue affects some unknown processing of the file post_comment.php. This manipulation of the argument Name causes sql injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. | ||||
| CVE-2026-8132 | 2026-05-08 | 7.3 High | ||
| A weakness has been identified in CodeAstro Leave Management System 1.0. Affected is an unknown function of the file /login.php. This manipulation of the argument txt_username causes sql injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. | ||||
| CVE-2026-34327 | 1 Microsoft | 1 Partner Center | 2026-05-08 | 8.2 High |
| Externally controlled reference to a resource in another sphere in Microsoft Partner Center allows an unauthorized attacker to perform spoofing over a network. | ||||
| CVE-2026-42275 | 2 Netfoundry, Openziti | 2 Zrok, Zrok | 2026-05-08 | 8.7 High |
| zrok is software for sharing web services, files, and network resources. Prior to version 2.0.2, the zrok WebDAV drive backend (davServer.Dir) restricts path traversal through lexical normalization but does not prevent symlink following. When a symbolic link inside the shared DriveRoot points to a location outside that root, remote WebDAV consumers can read files and—on shares without OS-level permission restrictions—write or overwrite files anywhere on the host filesystem accessible to the zrok process. This issue has been patched in version 2.0.2. | ||||
| CVE-2026-35435 | 1 Microsoft | 1 Azure Ai Foundry | 2026-05-08 | 8.6 High |
| Improper access control in Azure AI Foundry M365 published agents allows an unauthorized attacker to elevate privileges over a network. | ||||
| CVE-2026-43441 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. If bonding ARP/NS validation is enabled, an IPv6 NS/NA packet received on a slave can reach bond_validate_na(), which calls bond_has_this_ip6(). That path calls ipv6_chk_addr() and can crash in __ipv6_chk_addr_and_flags(). BUG: kernel NULL pointer dereference, address: 00000000000005d8 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:__ipv6_chk_addr_and_flags+0x69/0x170 Call Trace: <IRQ> ipv6_chk_addr+0x1f/0x30 bond_validate_na+0x12e/0x1d0 [bonding] ? __pfx_bond_handle_frame+0x10/0x10 [bonding] bond_rcv_validate+0x1a0/0x450 [bonding] bond_handle_frame+0x5e/0x290 [bonding] ? srso_alias_return_thunk+0x5/0xfbef5 __netif_receive_skb_core.constprop.0+0x3e8/0xe50 ? srso_alias_return_thunk+0x5/0xfbef5 ? update_cfs_rq_load_avg+0x1a/0x240 ? srso_alias_return_thunk+0x5/0xfbef5 ? __enqueue_entity+0x5e/0x240 __netif_receive_skb_one_core+0x39/0xa0 process_backlog+0x9c/0x150 __napi_poll+0x30/0x200 ? srso_alias_return_thunk+0x5/0xfbef5 net_rx_action+0x338/0x3b0 handle_softirqs+0xc9/0x2a0 do_softirq+0x42/0x60 </IRQ> <TASK> __local_bh_enable_ip+0x62/0x70 __dev_queue_xmit+0x2d3/0x1000 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? packet_parse_headers+0x10a/0x1a0 packet_sendmsg+0x10da/0x1700 ? kick_pool+0x5f/0x140 ? srso_alias_return_thunk+0x5/0xfbef5 ? __queue_work+0x12d/0x4f0 __sys_sendto+0x1f3/0x220 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x101/0xf80 ? exc_page_fault+0x6e/0x170 ? srso_alias_return_thunk+0x5/0xfbef5 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix this by checking ipv6_mod_enabled() before dispatching IPv6 packets to bond_na_rcv(). If IPv6 is disabled, return early from bond_rcv_validate() and avoid the path to ipv6_chk_addr(). | ||||
| CVE-2026-5127 | 2 Wedevs, Wordpress | 2 User Frontend: Ai Powered Frontend Posting, User Directory, Profile, Membership & User Registration, Wordpress | 2026-05-08 | 8.8 High |
| The User Frontend: AI Powered Frontend Posting, User Directory, Profile, Membership & User Registration plugin for WordPress is vulnerable to Deserialization of Untrusted Data in versions up to, and including, 4.3.1 This is due to insufficient input validation and type checking on the wpuf_files parameter during form submission, combined with unconditional deserialization via maybe_unserialize() when displaying post content. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject arbitrary PHP objects, which can be leveraged to execute arbitrary code, delete arbitrary files, or perform other malicious actions if a POP chain is present on the target system. | ||||