Export limit exceeded: 45724 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (45724 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-49858 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption The TPM event log table is a Linux specific construct, where the data produced by the GetEventLog() boot service is cached in memory, and passed on to the OS using an EFI configuration table. The use of EFI_LOADER_DATA here results in the region being left unreserved in the E820 memory map constructed by the EFI stub, and this is the memory description that is passed on to the incoming kernel by kexec, which is therefore unaware that the region should be reserved. Even though the utility of the TPM2 event log after a kexec is questionable, any corruption might send the parsing code off into the weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY instead, which is always treated as reserved by the E820 conversion logic. | ||||
| CVE-2024-47667 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0) Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0 (SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an inbound PCIe TLP spans more than two internal AXI 128-byte bursts, the bus may corrupt the packet payload and the corrupt data may cause associated applications or the processor to hang. The workaround for Errata #i2037 is to limit the maximum read request size and maximum payload size to 128 bytes. Add workaround for Errata #i2037 here. The errata and workaround is applicable only to AM65x SR 1.0 and later versions of the silicon will have this fixed. [1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf | ||||
| CVE-2024-46834 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: fail closed if we can't get max channel used in indirection tables Commit 0d1b7d6c9274 ("bnxt: fix crashes when reducing ring count with active RSS contexts") proves that allowing indirection table to contain channels with out of bounds IDs may lead to crashes. Currently the max channel check in the core gets skipped if driver can't fetch the indirection table or when we can't allocate memory. Both of those conditions should be extremely rare but if they do happen we should try to be safe and fail the channel change. | ||||
| CVE-2024-46777 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udf: Avoid excessive partition lengths Avoid mounting filesystems where the partition would overflow the 32-bits used for block number. Also refuse to mount filesystems where the partition length is so large we cannot safely index bits in a block bitmap. | ||||
| CVE-2024-46774 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: Prevent Spectre v1 gadget construction in sys_rtas() Smatch warns: arch/powerpc/kernel/rtas.c:1932 __do_sys_rtas() warn: potential spectre issue 'args.args' [r] (local cap) The 'nargs' and 'nret' locals come directly from a user-supplied buffer and are used as indexes into a small stack-based array and as inputs to copy_to_user() after they are subject to bounds checks. Use array_index_nospec() after the bounds checks to clamp these values for speculative execution. | ||||
| CVE-2024-46747 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: cougar: fix slab-out-of-bounds Read in cougar_report_fixup report_fixup for the Cougar 500k Gaming Keyboard was not verifying that the report descriptor size was correct before accessing it | ||||
| CVE-2024-46731 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix the Out-of-bounds read warning using index i - 1U may beyond element index for mc_data[] when i = 0. | ||||
| CVE-2024-46675 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: Prevent USB core invalid event buffer address access This commit addresses an issue where the USB core could access an invalid event buffer address during runtime suspend, potentially causing SMMU faults and other memory issues in Exynos platforms. The problem arises from the following sequence. 1. In dwc3_gadget_suspend, there is a chance of a timeout when moving the USB core to the halt state after clearing the run/stop bit by software. 2. In dwc3_core_exit, the event buffer is cleared regardless of the USB core's status, which may lead to an SMMU faults and other memory issues. if the USB core tries to access the event buffer address. To prevent this hardware quirk on Exynos platforms, this commit ensures that the event buffer address is not cleared by software when the USB core is active during runtime suspend by checking its status before clearing the buffer address. | ||||
| CVE-2024-44931 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: prevent potential speculation leaks in gpio_device_get_desc() Userspace may trigger a speculative read of an address outside the gpio descriptor array. Users can do that by calling gpio_ioctl() with an offset out of range. Offset is copied from user and then used as an array index to get the gpio descriptor without sanitization in gpio_device_get_desc(). This change ensures that the offset is sanitized by using array_index_nospec() to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. | ||||
| CVE-2024-42301 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-01-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dev/parport: fix the array out-of-bounds risk Fixed array out-of-bounds issues caused by sprintf by replacing it with snprintf for safer data copying, ensuring the destination buffer is not overflowed. Below is the stack trace I encountered during the actual issue: [ 66.575408s] [pid:5118,cpu4,QThread,4]Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: do_hardware_base_addr+0xcc/0xd0 [parport] [ 66.575408s] [pid:5118,cpu4,QThread,5]CPU: 4 PID: 5118 Comm: QThread Tainted: G S W O 5.10.97-arm64-desktop #7100.57021.2 [ 66.575439s] [pid:5118,cpu4,QThread,6]TGID: 5087 Comm: EFileApp [ 66.575439s] [pid:5118,cpu4,QThread,7]Hardware name: HUAWEI HUAWEI QingYun PGUX-W515x-B081/SP1PANGUXM, BIOS 1.00.07 04/29/2024 [ 66.575439s] [pid:5118,cpu4,QThread,8]Call trace: [ 66.575469s] [pid:5118,cpu4,QThread,9] dump_backtrace+0x0/0x1c0 [ 66.575469s] [pid:5118,cpu4,QThread,0] show_stack+0x14/0x20 [ 66.575469s] [pid:5118,cpu4,QThread,1] dump_stack+0xd4/0x10c [ 66.575500s] [pid:5118,cpu4,QThread,2] panic+0x1d8/0x3bc [ 66.575500s] [pid:5118,cpu4,QThread,3] __stack_chk_fail+0x2c/0x38 [ 66.575500s] [pid:5118,cpu4,QThread,4] do_hardware_base_addr+0xcc/0xd0 [parport] | ||||
| CVE-2024-42131 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-01-05 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: avoid overflows in dirty throttling logic The dirty throttling logic is interspersed with assumptions that dirty limits in PAGE_SIZE units fit into 32-bit (so that various multiplications fit into 64-bits). If limits end up being larger, we will hit overflows, possible divisions by 0 etc. Fix these problems by never allowing so large dirty limits as they have dubious practical value anyway. For dirty_bytes / dirty_background_bytes interfaces we can just refuse to set so large limits. For dirty_ratio / dirty_background_ratio it isn't so simple as the dirty limit is computed from the amount of available memory which can change due to memory hotplug etc. So when converting dirty limits from ratios to numbers of pages, we just don't allow the result to exceed UINT_MAX. This is root-only triggerable problem which occurs when the operator sets dirty limits to >16 TB. | ||||
| CVE-2024-42068 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Take return from set_memory_ro() into account with bpf_prog_lock_ro() set_memory_ro() can fail, leaving memory unprotected. Check its return and take it into account as an error. | ||||
| CVE-2024-42063 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf prog stack with kmsan_unposion_memory in interpreter mode syzbot reported uninit memory usages during map_{lookup,delete}_elem. ========== BUG: KMSAN: uninit-value in __dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline] BUG: KMSAN: uninit-value in dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796 __dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline] dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796 ____bpf_map_lookup_elem kernel/bpf/helpers.c:42 [inline] bpf_map_lookup_elem+0x5c/0x80 kernel/bpf/helpers.c:38 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run256+0xb5/0xe0 kernel/bpf/core.c:2237 ========== The reproducer should be in the interpreter mode. The C reproducer is trying to run the following bpf prog: 0: (18) r0 = 0x0 2: (18) r1 = map[id:49] 4: (b7) r8 = 16777216 5: (7b) *(u64 *)(r10 -8) = r8 6: (bf) r2 = r10 7: (07) r2 += -229 ^^^^^^^^^^ 8: (b7) r3 = 8 9: (b7) r4 = 0 10: (85) call dev_map_lookup_elem#1543472 11: (95) exit It is due to the "void *key" (r2) passed to the helper. bpf allows uninit stack memory access for bpf prog with the right privileges. This patch uses kmsan_unpoison_memory() to mark the stack as initialized. This should address different syzbot reports on the uninit "void *key" argument during map_{lookup,delete}_elem. | ||||
| CVE-2024-41015 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: add bounds checking to ocfs2_check_dir_entry() This adds sanity checks for ocfs2_dir_entry to make sure all members of ocfs2_dir_entry don't stray beyond valid memory region. | ||||
| CVE-2024-41014 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2026-01-05 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: add bounds checking to xlog_recover_process_data There is a lack of verification of the space occupied by fixed members of xlog_op_header in the xlog_recover_process_data. We can create a crafted image to trigger an out of bounds read by following these steps: 1) Mount an image of xfs, and do some file operations to leave records 2) Before umounting, copy the image for subsequent steps to simulate abnormal exit. Because umount will ensure that tail_blk and head_blk are the same, which will result in the inability to enter xlog_recover_process_data 3) Write a tool to parse and modify the copied image in step 2 4) Make the end of the xlog_op_header entries only 1 byte away from xlog_rec_header->h_size 5) xlog_rec_header->h_num_logops++ 6) Modify xlog_rec_header->h_crc Fix: Add a check to make sure there is sufficient space to access fixed members of xlog_op_header. | ||||
| CVE-2024-41013 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't walk off the end of a directory data block This adds sanity checks for xfs_dir2_data_unused and xfs_dir2_data_entry to make sure don't stray beyond valid memory region. Before patching, the loop simply checks that the start offset of the dup and dep is within the range. So in a crafted image, if last entry is xfs_dir2_data_unused, we can change dup->length to dup->length-1 and leave 1 byte of space. In the next traversal, this space will be considered as dup or dep. We may encounter an out of bound read when accessing the fixed members. In the patch, we make sure that the remaining bytes large enough to hold an unused entry before accessing xfs_dir2_data_unused and xfs_dir2_data_unused is XFS_DIR2_DATA_ALIGN byte aligned. We also make sure that the remaining bytes large enough to hold a dirent with a single-byte name before accessing xfs_dir2_data_entry. | ||||
| CVE-2024-40988 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix UBSAN warning in kv_dpm.c Adds bounds check for sumo_vid_mapping_entry. | ||||
| CVE-2024-40974 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Enforce hcall result buffer validity and size plpar_hcall(), plpar_hcall9(), and related functions expect callers to provide valid result buffers of certain minimum size. Currently this is communicated only through comments in the code and the compiler has no idea. For example, if I write a bug like this: long retbuf[PLPAR_HCALL_BUFSIZE]; // should be PLPAR_HCALL9_BUFSIZE plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, ...); This compiles with no diagnostics emitted, but likely results in stack corruption at runtime when plpar_hcall9() stores results past the end of the array. (To be clear this is a contrived example and I have not found a real instance yet.) To make this class of error less likely, we can use explicitly-sized array parameters instead of pointers in the declarations for the hcall APIs. When compiled with -Warray-bounds[1], the code above now provokes a diagnostic like this: error: array argument is too small; is of size 32, callee requires at least 72 [-Werror,-Warray-bounds] 60 | plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, | ^ ~~~~~~ [1] Enabled for LLVM builds but not GCC for now. See commit 0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") and related changes. | ||||
| CVE-2024-40902 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: xattr: fix buffer overflow for invalid xattr When an xattr size is not what is expected, it is printed out to the kernel log in hex format as a form of debugging. But when that xattr size is bigger than the expected size, printing it out can cause an access off the end of the buffer. Fix this all up by properly restricting the size of the debug hex dump in the kernel log. | ||||
| CVE-2024-39480 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: kdb: Fix buffer overflow during tab-complete Currently, when the user attempts symbol completion with the Tab key, kdb will use strncpy() to insert the completed symbol into the command buffer. Unfortunately it passes the size of the source buffer rather than the destination to strncpy() with predictably horrible results. Most obviously if the command buffer is already full but cp, the cursor position, is in the middle of the buffer, then we will write past the end of the supplied buffer. Fix this by replacing the dubious strncpy() calls with memmove()/memcpy() calls plus explicit boundary checks to make sure we have enough space before we start moving characters around. | ||||