Export limit exceeded: 378488 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378488 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74375 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix deadlock in read error recovery path raid1d and raid10d may resubmit a split md cloned bio while handling a read error. In this case, resubmitting the bio can lead to a deadlock if the array is suspended before md_handle_request() acquires an active_io reference via percpu_ref_tryget_live(). Since the cloned bio already holds an active_io reference, trying to acquire another reference via percpu_ref_tryget_live() can lead to a deadlock while the array is suspended. Fix this by using percpu_ref_get() for md cloned bios. | ||||
| CVE-2026-74366 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL deref in change_sta_links for unready link _ieee80211_set_active_links() calls _ieee80211_link_use_channel() for each newly-added link and WARN_ON_ONCE()s if it fails. The call uses assign_on_failure=true, which allows mac80211 to continue despite driver failures, but when a mac80211-level channel validation fails (e.g., combinations check, DFS, or no available radio), drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create() is only called from that path, arvif->is_created remains false and arvif->ar remains NULL for the failed link. The subsequent drv_change_sta_links() call reaches ath12k_mac_op_change_sta_links(), which allocates an arsta and sets ahsta->links_map |= BIT(link_id) for the broken link before checking whether the link is ready. When the vdev was never created, only station_add() is skipped, but the link remains in links_map. Any subsequent operation iterating links_map and dereferencing arvif->ar without a NULL check will crash. Two observed examples are NULL deref in ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key() when wpa_supplicant installs PTK keys. BUG: Unable to handle kernel NULL pointer dereference at 0x00000000 pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k] Call trace: ath12k_mac_station_post_remove+0x40/0xe8 [ath12k] ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k] drv_sta_state+0x100/0xbd8 [mac80211] __sta_info_destroy_part2+0x148/0x178 [mac80211] ieee80211_set_disassoc+0x500/0x678 [mac80211] BUG: Unable to handle kernel NULL pointer dereference at 0x00000000 pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k] Call trace: ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k] drv_set_key+0x70/0x100 [mac80211] ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211] ieee80211_add_key+0x16c/0x2ac [mac80211] nl80211_new_key+0x138/0x280 [cfg80211] Fix this by checking arvif->is_created before calling ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from entering links_map, so all subsequent operations iterating the bitmap are protected. The reliability of arvif->is_created across all error paths is ensured by the preceding patch. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74337 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NMI/tracepoint re-entry deadlock on lru locks NMI and tracepoint BPF programs can re-enter the per-CPU or global LRU lock that bpf_lru_pop_free()/push_free() already hold on the same CPU, AA-deadlocking. Lockdep reports "inconsistent {INITIAL USE} -> {IN-NMI}" on &l->lock (syzbot c69a0a2c816716f1e0d5) and "possible recursive locking detected" on &loc_l->lock (syzbot 18b26edb69b2e19f3b33). Prior trylock and rqspinlock based fixes (see links) were nacked because compromised on reliability. This patch converts every LRU lock site to rqspinlock_t and adds a recovery path for some failure windows to avoid node leaks. Failure recovery: - *_pop_free top-level: return NULL; prealloc_lru_pop() already treats that as no-free-element (-ENOMEM). - Cross-CPU steal: skip the victim's locked loc_l, try next CPU. - Post-steal local lock fail: publish stolen node to lockless per-CPU free_llist; next pop on this CPU picks it up. - push_free fail: mark node pending_free=1. __local_list_flush(), __local_list_pop_pending() reclaim the node from pending_list. __bpf_lru_list_shrink_inactive() reclaims the node from inactive list. Nodes from active list are reclaimed by __bpf_lru_list_shrink() or after __bpf_lru_list_rotate_active() demotes it to the inactive. | ||||
| CVE-2026-74331 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix recursive lock in device_cache_fw_images() A recursive locking deadlock can occur in the firmware loader's power management notification handler. During system suspend or hibernation preparation, fw_pm_notify() calls device_cache_fw_images(). This function acquires fw_lock to set the firmware cache state to FW_LOADER_START_CACHE and then iterates over all devices using dpm_for_each_dev() while still holding the lock. For each device, dev_cache_fw_image() schedules asynchronous work to cache the firmware. If memory allocation for the async work entry fails (e.g., in out-of-memory conditions), async_schedule_node_domain() falls back to executing the work function synchronously in the current thread. The synchronous execution path (__async_dev_cache_fw_image() -> cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire fw_lock again. Since the current thread already holds fw_lock, this results in a recursive locking deadlock. Fix this by releasing fw_lock immediately after updating the cache state and before calling dpm_for_each_dev(). The lock is only needed to protect the state update. Concurrent firmware requests will correctly see the FW_LOADER_START_CACHE state and use the piggyback mechanism, which is independently protected by its own fwc->name_lock. | ||||
| CVE-2026-74290 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flow: Dont expose folded kernel pointers The flow classifier falls back to addr_fold() for fields that are missing from packet headers. In map mode, userspace controls mask, xor, rshift, addend and divisor, and can observe the resulting classid through class statistics. This allows a tc classifier in a user/network namespace to recover the 32-bit folded value of skb->sk, skb_dst() or skb_nfct(). Align with standard kernel practices for pointer hashing and replace the XOR folding with a keyed siphash (which is cryptographically secure) | ||||
| CVE-2026-72498 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid displaying the kernel pointer While dumping the info on MR using the rdma tool, we dump the mr_hwq which is a kernel pointer. There is no need to expose this value for end user. So avoid it. | ||||
| CVE-2026-72484 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: most: video: avoid double free on video register failure comp_register_videodev() allocates a video_device with video_device_alloc() and releases it if video_register_device() fails. This can double free the video_device when __video_register_device() reaches device_register() and that call fails: video_register_device() -> __video_register_device() -> device_register() fails -> put_device(&vdev->dev) -> v4l2_device_release() -> vdev->release(vdev) -> video_device_release(vdev) comp_register_videodev() -> video_device_release(mdev->vdev) Use video_device_release_empty() while registering the device so that registration failure paths do not free mdev->vdev through vdev->release(). comp_register_videodev() then releases mdev->vdev exactly once on failure. Restore video_device_release() after successful registration so the registered device keeps its normal lifetime handling. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-72467 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Check frwr_wp_create() during connect frwr_wp_create() creates the singleton Memory Region used to encode padding for Write chunks whose payload length is not XDR-aligned. Its failure paths return a negative errno and leave ep->re_write_pad_mr set to NULL. rpcrdma_xprt_connect() currently ignores that return value. If frwr_wp_create() fails after the rest of the connection setup succeeds, xprt_rdma_connect_worker() treats the connection attempt as successful and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned receive page length reaches rpcrdma_encode_write_list(), passes the NULL write-pad MR to encode_rdma_segment(), and dereferences it. This is locally triggerable on an NFS/RDMA client after a connect or reconnect hits a local MR allocation, DMA-map, MR-map, or post-send failure; a remote peer alone cannot force the local MR setup failure. Check the return value and fail the connect as -ENOTCONN, matching the adjacent setup failures. This keeps XPRT_CONNECTED clear and lets the normal reconnect path retry. | ||||
| CVE-2026-72386 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix a leak when a group is evicted before the tiler OOM is serviced A group ref is tied to the pending tiler_oom_work, so we need to release it if the cancel was effective. | ||||
| CVE-2026-72349 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt() On links faster than ~34 Gbps, where byte rate may exceed 2^32-1 (~ 4.3 GBps), the comparison result becomes incorrect because the truncated value no longer reflects the actual estimator rate. Fix by changing the local variables to u64. | ||||
| CVE-2026-72326 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cake: reject overhead values that underflow length CAKE accepts signed overhead values and stores them in an s16, but the adjusted packet length calculation uses unsigned arithmetic. A negative effective length can therefore wrap to a large value. Such configurations make rate accounting depend on integer wraparound rather than on the packet size userspace intended to model. A static netlink lower bound is not enough because packets reaching CAKE can be smaller than any reasonable manual-overhead allowance. Fold the signed overhead adjustment into the existing datapath MPU clamp so negative adjusted lengths are clamped before link-layer framing adjustments. | ||||
| CVE-2026-72309 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing/remotes: Fix leak in trace_remote_alloc_buffer() error path If page allocation fails in trace_remote_alloc_buffer(), desc->nr_cpus is not yet incremented for the current CPU. As a consequence, on error, half-allocated rb_desc will not be freed in trace_remote_free_buffer(). Increment desc->nr_cpus as soon as the first allocation for the current CPU has succeeded. | ||||
| CVE-2026-72266 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: vesafb: fix memory leak in vesafb_probe() Since commit 73ce73c30ba9 ("fbdev: Transfer video= option strings to caller; clarify ownership") the string returned from fb_get_options() is expected to be freed by the caller. But the string is not freed in vesafb_probe(). Fix that by freeing the option string after setup. | ||||
| CVE-2026-72258 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8183: Release reserved memory on cleanup The MT8183 AFE probe can assign reserved memory with of_reserved_mem_device_init(), but the assignment is never released on driver removal or later probe failures. Register a devm cleanup action so the reserved memory assignment is released consistently, matching newer Mediatek AFE drivers. | ||||
| CVE-2026-72245 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix device reference leak in host1x_device_parse_dt() error path After device_initialize(), the embedded struct device in struct host1x_device should be released through the device core with put_device(). In host1x_device_add(), if host1x_device_parse_dt() fails, the current error path frees the object directly with kfree(device). That bypasses the normal device lifetime handling and leaks the reference held on the embedded struct device. The issue was identified by a static analysis tool I developed and confirmed by manual review. Fix this by using put_device() in the host1x_device_parse_dt() failure path. | ||||
| CVE-2026-72236 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init() ev variable is userspace controlled via event->attr.config and used as an array index after bounds checking, but without speculation barriers. Add the missing array_index_nospec() call to prevent speculative execution. | ||||
| CVE-2026-72228 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: frag: fix primary_if leak on failed linearization If the skb has a frag_list, it must be linearized before it can be split using skb_split(). But when this step failed, it must not only free the skb but also take care of the reference to the already found primary_if. | ||||
| CVE-2026-72215 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: DEC: Ensure 32-bit stack location for o32 prom_printf() In 64-bit configurations calling any firmware entry points from a kernel thread other than the initial one will result in a situation where the stack has been placed in the XKPHYS 64-bit memory segment. Consequently the stack pointer is no longer a 32-bit value and when the 32-bit firmware code called uses 32-bit ALU operations to manipulate the stack pointer, the calculated result is incorrect (in fact in the 64-bit MIPS ISA almost all 32-bit ALU operations will produce an unpredictable result when executed on 64-bit data) and control goes astray. This may happen when no final console driver has been enabled in the configuration and consequently the initial console continues being used late into bootstrap, or with an upcoming change that will switch the zs driver to use a platform device, which in turn will make the console handover happen only after other kernel threads have already been started, and the kernel will hang at: pid_max: default: 32768 minimum: 301 or somewhat later, but always before: cblist_init_generic: Setting adjustable number of callback queues. has been printed. It seems that only the prom_printf() entry point is affected. Of all the other entry points wired only rex_slot_address() and rex_gettcinfo() are called from a kernel thread other than the initial one, specifically kernel_init(), and they are leaf functions that do no business with the stack, having worked with no issue ever since 64-bit support was added for the platform back in 2002. To address this issue then, arrange for the stack to be switched in the o32 wrapper as required for prom_printf() only, by supplying call_o32() with a pointer to a chunk of initdata space, which is placed in the CKSEG0 32-bit compatibility segment, observing that prom_printf() is only called from console output handler and therefore with the console lock held, implying no need for this code to be reentrant. Other firmware entry points may be called with interrupts enabled and no lock held, and may therefore require that call_o32() be reentrant. They trigger no issue at this point and "if it ain't broke, don't fix it," so just leave them alone. | ||||
| CVE-2026-72187 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid self-deadlock during inode eviction An attribute-list update performed while allocating clusters can drop the last reference to the temporary attribute inode. Evicting that inode drops its reference to the base inode and can invoke ntfs_drop_big_inode() for the base inode from within the base inode's own writeback path. If the base inode is unlinked, ntfs_drop_big_inode() calls truncate_setsize(), which waits for the inode's folio writeback to complete. The same writeback worker is responsible for completing that writeback, so it waits for itself indefinitely. Prevent this self-deadlock by grabbing a reference to the base inode at the beginning of ntfs_writepages() and releasing it at the end of the function. This defers eviction until all bios have been submitted, allowing the wait for folio writeback to complete safely. | ||||
| CVE-2026-72179 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv: cacheinfo: Fix node reference leak in populate_cache_leaves Currently, the while loop drops the reference to prev in each iteration. If the loop terminates early due to a break, the final of_node_put(np) correctly drops the reference to the current node. However, if the loop terminates naturally because np == NULL, calling of_node_put(np) is a no-op. This leaves the last valid node stored in prev without its reference dropped, resulting in a node reference leak. Fix this by changing the final `of_node_put(np)` to `of_node_put(prev)`. | ||||