Export limit exceeded: 354619 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (354619 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46157 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix data race at accessing runtime.oss.trigger Currently the runtime.oss.trigger field may be accessed concurrently without protection, which may lead to the data race. And, in this case, it may lead to more severe problem because it's a bit field; as writing the data, it may overwrite other bit fields as well, which confuses the operation completely, as spotted by fuzzing. Fix it by covering runtime.oss.trigger bit fled also with the existing params_lock mutex in both snd_pcm_oss_get_trigger() and snd_pcm_oss_poll(). | ||||
| CVE-2026-46155 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix out-of-bounds read in smb2_compound_op() If a server sends a truncated response but a large OutputBufferLength, and terminates the EA list early, check_wsl_eas() returns success without validating that the entire OutputBufferLength fits within iov_len. Then smb2_compound_op() does: memcpy(idata->wsl.eas, data[0], size[0]); Where size[0] is OutputBufferLength. If iov_len is smaller than size[0], memcpy can read beyond the end of the rsp_iov allocation and leak adjacent kernel heap memory. | ||||
| CVE-2026-46152 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drop stray 'static' from fast-RX rx_result ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but its per-invocation rx_result is declared static. Concurrent callers then share one instance and can overwrite each other's result between ieee80211_rx_mesh_data() and the switch on res. That can make a packet that was queued or consumed by ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make a packet that should continue return as queued. Make res an automatic variable so each invocation keeps its own result. | ||||
| CVE-2026-46145 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Validate rx_hash_key_len Sashiko points out that rx_hash_key_len comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow. | ||||
| CVE-2026-46138 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt hci_le_create_big_complete_evt() iterates over BT_BOUND connections for a BIG handle using a while loop, accessing ev->bis_handle[i++] on each iteration. However, there is no check that i stays within ev->num_bis before the array access. When a controller sends a LE_Create_BIG_Complete event with fewer bis_handle entries than there are BT_BOUND connections for that BIG, or with num_bis=0, the loop reads beyond the valid bis_handle[] flex array into adjacent heap memory. Since the out-of-bounds values typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle() rejects them and the connection remains in BT_BOUND state. The same connection is then found again by hci_conn_hash_lookup_big_state(), creating an infinite loop with hci_dev_lock held. Fix this by terminating the BIG if in case not all BIS could be setup properly. | ||||
| CVE-2026-46137 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: fix potential data-race This mptcp_pm_add_timer() helper is executed as a timer callback in softirq context. To avoid any data races, the socket lock needs to be held with bh_lock_sock(). If the socket is in use, retry again soon after, similar to what is done with the keepalive timer. | ||||
| CVE-2026-46135 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix race between ICReq handling and queue teardown nvmet_tcp_handle_icreq() updates queue->state after sending an Initialization Connection Response (ICResp), but it does so without serializing against target-side queue teardown. If an NVMe/TCP host sends an Initialization Connection Request (ICReq) and immediately closes the connection, target-side teardown may start in softirq context before io_work drains the already buffered ICReq. In that case, nvmet_tcp_schedule_release_queue() sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue reference under state_lock. If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and allows a later socket state change to re-enter teardown and issue a second kref_put() on an already released queue. The ICResp send failure path has the same problem. If teardown has already moved the queue to DISCONNECTING, a send error can still overwrite the state with NVMET_TCP_Q_FAILED, again reopening the window for a second teardown path to drop the queue reference. Fix this by serializing both post-send state transitions with state_lock and bailing out if teardown has already started. Use -ESHUTDOWN as an internal sentinel for that bail-out path rather than propagating it as a transport error like -ECONNRESET. Keep nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before honoring that sentinel so receive-side parsing stays quiesced until the existing release path completes. | ||||
| CVE-2026-46125 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: remove station if connection prep fails If connection preparation fails for MLO connections, then the interface is completely reset to non-MLD. In this case, we must not keep the station since it's related to the link of the vif being removed. Delete an existing station. Any "new_sta" is already being removed, so that doesn't need changes. This fixes a use-after-free/double-free in debugfs if that's enabled, because a vif going from MLD (and to MLD, but that's not relevant here) recreates its entire debugfs. | ||||
| CVE-2026-46117 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss() Sashiko points out that the user can specify WQs sharing the same CQ as a part of the uAPI and this will trigger the WARN_ON() then go on to corrupt the kernel. Just reject it outright and fail the QP creation. | ||||
| CVE-2026-46116 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s hlist_del_rcu calls under syzkaller load on linux-6.12.y stable (reproduced on 6.12.47, also reachable via the same code path on torvalds/master and on the ipsec tree). Nine unique signatures cluster in the xfrm_state lifecycle, the load-bearing one being: BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline] BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline] BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435 Workqueue: netns cleanup_net Call Trace: __hlist_del / hlist_del_rcu __xfrm_state_delete xfrm_state_delete xfrm_state_flush xfrm_state_fini ops_exit_list cleanup_net The other observed signatures hit the same slab object from __xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB write variant of __xfrm_state_delete, all on the byseq/byspi hash chains. __xfrm_state_delete() guards its byseq and byspi unhashes with value-based predicates: if (x->km.seq) hlist_del_rcu(&x->byseq); if (x->id.spi) hlist_del_rcu(&x->byspi); while everywhere else in the file (e.g. state_cache, state_cache_input) the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets x->id.spi = newspi inside xfrm_state_lock and then immediately inserts into byspi, but a path that observes x->id.spi != 0 outside of xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently with whether x is actually on the list. The same holds for x->km.seq versus byseq, and the bydst/bysrc unhashes have no predicate at all, so a second __xfrm_state_delete() on the same object writes through LIST_POISON pprev. The defensive change here: - Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst, bysrc, byseq and byspi so a second deletion is a no-op rather than a write through LIST_POISON pprev. The byseq/byspi nodes are already initialised in xfrm_state_alloc(). - Test hlist_unhashed() rather than the value predicate for byseq/byspi, so the unhash decision tracks list state rather than mutable scalar fields. Empirical verification: applied this patch on top of v6.12.47, rebuilt, and re-ran the same syzkaller harness for 1h16m on a previously-crashy configuration that produced ~100 hits each of slab-use-after-free Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in __xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at ~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo confirms the xfrm_state slab is actively allocated and freed during the run (~143 KiB resident), so the fuzzer is still exercising those code paths -- they just no longer crash. Reproduction: - Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV - syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db - 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal - 9 unique signatures collected in ~9h, all within xfrm_state lifecycle | ||||
| CVE-2026-46115 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: block: add pgmap check to biovec_phys_mergeable biovec_phys_mergeable() is used by the request merge, DMA mapping, and integrity merge paths to decide if two physically contiguous bvec segments can be coalesced into one. It currently has no check for whether the segments belong to different dev_pagemaps. When zone device memory is registered in multiple chunks, each chunk gets its own dev_pagemap. A single bio can legitimately contain bvecs from different pgmaps -- iov_iter_extract_bvecs() breaks at pgmap boundaries but the outer loop in bio_iov_iter_get_pages() continues filling the same bio. If such bvecs are physically contiguous, biovec_phys_mergeable() will coalesce them, making it impossible to recover the correct pgmap for the merged segment via page_pgmap(). Add a zone_device_pages_have_same_pgmap() check to prevent merging bvec segments that span different pgmaps. | ||||
| CVE-2026-46114 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c unconditionally dereferences 8 bytes at payload_addr(pkt): value = *(u64 *)payload_addr(pkt); check_rkey() previously accepted an ATOMIC_WRITE request with pktlen == resid == 0 because the length validation only compared pktlen against resid. A remote initiator that sets the RETH length to 0 therefore reaches atomic_write_reply() with a zero-byte logical payload, and the responder reads sizeof(u64) bytes from past the logical end of the packet into skb->head tailroom, then writes those 8 bytes into the attacker's MR via rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel tailroom per probe (the other 4 bytes are the packet's own trailing ICRC). IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is protocol-invalid. Hoist a strict length check into check_rkey() so the responder never reaches the unchecked dereference, and keep the existing WRITE-family length logic for the normal RDMA WRITE path. Reproduced on mainline with an unmodified rxe driver: a sustained zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer bytes into the attacker's MR, including recognisable kernel strings and partial kernel-direct-map pointer words. With this patch applied the responder rejects the PDU and the MR stays all-zero. | ||||
| CVE-2026-46111 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix potential UAF in create_big_sync Add hci_conn_valid() check in create_big_sync() to detect stale connections before proceeding with BIG creation. Handle the resulting -ECANCELED in create_big_complete() and re-validate the connection under hci_dev_lock() before dereferencing, matching the pattern used by create_le_conn_complete() and create_pa_complete(). Keep the hci_conn object alive across the async boundary by taking a reference via hci_conn_get() when queueing create_big_sync(), and dropping it in the completion callback. The refcount and the lock are complementary: the refcount keeps the object allocated, while hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on hdev->conn_hash, as required by hci_conn_del(). hci_conn_put() is called outside hci_dev_unlock() so the final put (which resolves to kfree() via bt_link_release) does not run under hdev->lock, though the release path would be safe either way. Without this, create_big_complete() would unconditionally dereference the conn pointer on error, causing a use-after-free via hci_connect_cfm() and hci_conn_del(). | ||||
| CVE-2026-46110 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Prevent NULL deref when RX memory exhausted The CPU receives frames from the MAC through conventional DMA: the CPU allocates buffers for the MAC, then the MAC fills them and returns ownership to the CPU. For each hardware RX queue, the CPU and MAC coordinate through a shared ring array of DMA descriptors: one descriptor per DMA buffer. Each descriptor includes the buffer's physical address and a status flag ("OWN") indicating which side owns the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set the flag and the MAC is only allowed to clear it, and both must move through the ring in sequence: thus the ring is used for both "submissions" and "completions." In the stmmac driver, stmmac_rx() bookmarks its position in the ring with the `cur_rx` index. The main receive loop in that function checks for rx_descs[cur_rx].own=0, gives the corresponding buffer to the network stack (NULLing the pointer), and increments `cur_rx` modulo the ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its position with `dirty_rx`, allocates fresh buffers and rearms the descriptors (setting OWN=1). If it fails any allocation, it simply stops early (leaving OWN=0) and will retry where it left off when next called. This means descriptors have a three-stage lifecycle (terms my own): - `empty` (OWN=1, buffer valid) - `full` (OWN=0, buffer valid and populated) - `dirty` (OWN=0, buffer NULL) But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In the past (see 'Fixes:'), there was a bug where the loop could cycle `cur_rx` all the way back to the first descriptor it dirtied, resulting in a NULL dereference when mistaken for `full`. The aforementioned commit resolved that *specific* failure by capping the loop's iteration limit at `dma_rx_size - 1`, but this is only a partial fix: if the previous stmmac_rx_refill() didn't complete, then there are leftover `dirty` descriptors that the loop might encounter without needing to cycle fully around. The current code therefore panics (see 'Closes:') when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to catch up to `dirty_rx`. Fix this by explicitly checking, before advancing `cur_rx`, if the next entry is dirty; exit the loop if so. This prevents processing of the final, used descriptor until stmmac_rx_refill() succeeds, but fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix intended: so remove the clamp as well. Since stmmac_rx_zc() is a copy-paste-and-tweak of stmmac_rx() and the code structure is identical, any fix to stmmac_rx() will also need a corresponding fix for stmmac_rx_zc(). Therefore, apply the same check there. In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the MAC sets OWN=0 on the final descriptor, it will be unable to send any further DMA-complete IRQs until it's given more `empty` descriptors. Currently, the driver simply *hopes* that the next stmmac_rx_refill() succeeds, risking an indefinite stall of the receive process if not. But this is not a regression, so it can be addressed in a future change. | ||||
| CVE-2026-46105 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Limit NVMe request size to 2 MiB The HBA firmware reports NVMe MDTS values based on the underlying drive capability. However, because the driver allocates a fixed 4K buffer for the PRP list, accommodating at most 512 entries, the driver supports a maximum I/O transfer size of 2 MiB. Limit max_hw_sectors to the smaller of the reported MDTS and the 2 MiB driver limit to prevent issuing oversized I/O that may lead to a kernel oops. | ||||
| CVE-2026-46100 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs: afs: revert mmap_prepare() change Partially reverts commit 9d5403b1036c ("fs: convert most other generic_file_*mmap() users to .mmap_prepare()"). This is because the .mmap invocation establishes a refcount, but .mmap_prepare is called at a point where a merge or an allocation failure might happen after the call, which would leak the refcount increment. Functionality is being added to permit the use of .mmap_prepare in this case, but in the interim, we need to fix this. | ||||
| CVE-2026-46093 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: take vmap_purge_lock in shrinker decay_va_pool_node() can be invoked concurrently from two paths: __purge_vmap_area_lazy() when pools are being purged, and the shrinker via vmap_node_shrink_scan(). However, decay_va_pool_node() is not safe to run concurrently, and the shrinker path currently lacks serialization, leading to races and possible leaks. Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker path to ensure serialization with purge users. | ||||
| CVE-2026-46090 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix peer runtime UAF during format-change stop loopback_check_format() may stop the capture side when playback starts with parameters that no longer match a running capture stream. Commit 826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved the peer lookup under cable->lock, but the actual snd_pcm_stop() still runs after dropping that lock. A concurrent close can clear the capture entry from cable->streams[] and detach or free its runtime while the playback trigger path still holds a stale peer substream pointer. Keep a per-cable count of in-flight peer stops before dropping cable->lock, and make free_cable() wait for those stops before detaching the runtime. This preserves the existing behavior while making the peer runtime lifetime explicit. | ||||
| CVE-2026-46085 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxkad crypto unalignment handling Fix handling of a packet with a misaligned crypto length. Also handle non-ENOMEM errors from decryption by aborting. Further, remove the WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can still be emitted). | ||||
| CVE-2026-46081 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: acomp - fix wrong pointer stored by acomp_save_req() acomp_save_req() stores &req->chain in req->base.data. When acomp_reqchain_done() is invoked on asynchronous completion, it receives &req->chain as the data argument but casts it directly to struct acomp_req. Since data points to the chain member, all subsequent field accesses are at a wrong offset, resulting in memory corruption. The issue occurs when an asynchronous hardware implementation, such as the QAT driver, completes a request that uses the DMA virtual address interface (e.g. acomp_request_set_src_dma()). This combination causes crypto_acomp_compress() to enter the acomp_do_req_chain() path, which sets acomp_reqchain_done() as the completion callback via acomp_save_req(). With KASAN enabled, this manifests as a general protection fault in acomp_reqchain_done(): general protection fault, probably for non-canonical address 0xe000040000000000 KASAN: probably user-memory-access in range [0x0000400000000000-0x0000400000000007] RIP: 0010:acomp_reqchain_done+0x15b/0x4e0 Call Trace: <IRQ> qat_comp_alg_callback+0x5d/0xa0 [intel_qat] adf_ring_response_handler+0x376/0x8b0 [intel_qat] adf_response_handler+0x60/0x170 [intel_qat] tasklet_action_common+0x223/0x820 handle_softirqs+0x1ab/0x640 </IRQ> Fix this by storing the request itself in req->base.data instead of &req->chain, so that acomp_reqchain_done() receives the correct pointer. Simplify acomp_restore_req() accordingly to access req->chain directly. | ||||