Export limit exceeded: 378490 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378490 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74560 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: fix buffer leak in xsk_drop_skb() for AF_XDP multi-buffer Tx This patch is inspired by the check[1] from sashiko. It says when overflow happens, the address of cq to be published is invalid. Actually the severer thing is the whole process of publishing the address of cq in this particular case is not right: it should truely publish the address and advance the cached_prod in cq as long as it reads descriptors from txq. The following is the full analysis. xsk_drop_skb() is called in three places, which all discard a partially built multi-buffer skb: 1) xsk_build_skb() -EOVERFLOW error path: packet exceeds MAX_SKB_FRAGS 2) __xsk_generic_xmit() post-loop cleanup: an invalid descriptor in the TX ring prevents the partial packet from completing 3) xsk_release(): socket close while xs->skb holds an incomplete packet In all three cases, the TX descriptors for the already-processed frags have been consumed from the TX ring (xskq_cons_release), and CQ slots have been reserved. However, xsk_drop_skb() calls xsk_consume_skb() which cancels the CQ reservations via xsk_cq_cancel_locked(). Since the buffer addresses never appear in the completion queue, userspace permanently loses track of these buffers. Fix this by letting consume_skb() trigger the existing xsk_destruct_skb destructor, which already submits buffer addresses to the CQ via xsk_cq_submit_addr_locked(). Note that cancelling the descriptors back to the TX ring (via xskq_cons_cancel_n) is not a appropriate option because an oversized packet that always exceeds MAX_SKB_FRAGS would be retried indefinitely, which is an obviously deadlock bug in the TX path. Also move the desc->addr assignment in xsk_build_skb() above the overflow check so that the current descriptor's address is recorded before a potential -EOVERFLOW jump to free_err, consistent with the zerocopy path in xsk_build_skb_zerocopy(). [1]: https://lore.kernel.org/all/20260425041726.85FB3C2BCB2@smtp.kernel.org/ | ||||
| CVE-2026-19897 | 1 Mangroup | 1 Dtale | 2026-08-15 | 3.7 Low |
| A vulnerability has been found in mangroup dtale up to 3.22.0. This issue affects the function Login of the file dtale/auth.py of the component Login Endpoint. Such manipulation leads to improper restriction of excessive authentication attempts. The attack can be executed remotely. This attack is characterized by high complexity. The exploitability is assessed as difficult. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-74486 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: use exe_file_deny_write_access() for the interpreter clone For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the registered interpreter file and denies write access to the clone via plain deny_write_access(). The clone is installed as bprm->interpreter and later released by the exec machinery through exe_file_allow_write_access() which skips the i_writecount increment for files with FMODE_FSNOTIFY_HSM set. The deny and allow side can therefore come to different conclusions when pre-content watches are in play: if a pre-content watch is added to the interpreter after registration every subsequent exec through that entry takes a write denial on the clone that is never paired with a write allowance, driving the interpreter inode's i_writecount further down with each exec and leaving the interpreter unwritable even after the entry and all its users are gone. Take the write denial via exe_file_deny_write_access() so both sides of the pairing base their decision on the same file mode, and propagate failure instead of silently ignoring it: an interpreter that is concurrently open for writing now fails the exec with ETXTBSY, exactly like an interpreter freshly opened via open_exec() would. | ||||
| CVE-2026-74500 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix stack info leak in RME Digiface status snd_rme_digiface_read_status() reads a four-word status block from the device into an uninitialised on-stack __le32 buf[4] and, whenever the vendor control-IN transfer does not return a negative error, copies all four words into the caller's status[]. snd_usb_ctl_msg() copies the full requested size back into the caller's buffer regardless of how many bytes the data stage actually delivered: buf = kmemdup(data, size, GFP_KERNEL); err = usb_control_msg(dev, pipe, request, requesttype, value, index, buf, size, timeout); memcpy(data, buf, size); usb_control_msg() returns the transferred length on a short control-IN, which is a non-negative value, and writes only that many bytes. The remainder of the copy back is the kmemdup()ed image of the caller's buffer, so a device answering with a short data stage leaves the trailing words of buf[] holding leftover kernel stack. The only guard in the caller is err < 0, so those words are stored into status[]. They then reach user space: snd_rme_digiface_get_status_val() selects a 16-bit halfword of status[] per the control's reg/mask, and the eight Digiface status controls together expose the whole 16-byte frame to an unprivileged reader of /dev/snd/controlC*. Zero-initialise the buffer so a short read yields zeros instead of stack residue. This mirrors snd_rme_get_status1(), which already clears its output word before the same kind of vendor read. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74502 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: fix double free of out_cvts on rawmidi error snd_ump_attach_legacy_rawmidi() allocates the legacy conversion array ump->out_cvts and, on the snd_rawmidi_new() error path, frees it with kfree() but leaves ump->out_cvts pointing at the freed memory. When the endpoint is later torn down, snd_ump_endpoint_free() frees ump->out_cvts a second time, resulting in a double free. The host snd-usb-audio driver attaches the legacy rawmidi for any USB MIDI 2.0 (UMP) device, so a device that makes snd_rawmidi_new() fail reaches this path on enumeration. Clear ump->out_cvts after freeing it on the error path so it is not freed again during teardown. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74542 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio_queue ENOMEM in writeback by adding a mempool Fix the handling of folio_queue allocation failure in writeback by adding a mempool and passing in gfp_t flags to the rolling buffer functions that allocate memory, using the mempool if gfp != GFP_KERNEL. This is then extended upwards and the gfp to be used for a request is stored in the netfs_io_request struct and is then used for both requests and subrequests, eliminating the sleeping loops there. The failure caused: folio != NULL WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 fs/netfs/write_issue.c:603, CPU#3: syz.0.17/5919 | ||||
| CVE-2026-74552 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Only report alarms if driver is ready Userspace can read sysfs attributes before driver registration is complete, immediately after devm_hwmon_device_register_with_info() has been called. At that time, data->hwmon_dev is not yet initialized. This can trigger a NULL pointer access since lm90_update_device() and with it lm90_update_alarms_locked() will be called. This call schedules report_work and lm90_report_alarms(), which passes the still-NULL data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer dereference. Fix the problem by only scheduling the report and alert workers data->hwmon_dev is set. | ||||
| CVE-2026-74504 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix division by zero in initialize_timer() A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set the backing snd_timer's hardware resolution to an arbitrary 64-bit value via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero. When such a timer is bound to a sequencer queue, initialize_timer() computes the tick period as tmr->ticks = 1000000000 / (r * freq); where r is that user-controlled resolution and freq is the sequencer update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250). A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for any even freq, including DEFAULT_FREQUENCY (1000), so the division faults with a divide-by-zero. The division runs under tmr->lock with interrupts disabled, so the oops leaves the spinlock held and hangs the CPU. It is reachable by an unprivileged user with access to /dev/snd/timer and /dev/snd/seq. Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+ RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0 snd_seq_timer_start+0x15e/0x2b0 snd_seq_control_queue+0x56f/0xba0 snd_seq_write+0x3e0/0x730 Reject an overflowing product with check_mul_overflow() and fall back to a single tick, which also avoids feeding a wrapped-but-nonzero divisor (e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small value) into the period computation. | ||||
| CVE-2026-74505 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: Fix UAF at error handling during probe Although 6fire driver had a few fixes for dealing with the early error handling during the probe phase, it forgot a pending URB before freeing the resources, which may lead to a UAF. This patch addresses it by doing the almost same cleanup procedure like the normal disconnect phase at the error path. | ||||
| CVE-2026-74555 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path. | ||||
| CVE-2026-74559 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: drain continuation descs after overflow in xsk_build_skb() Fix generic xmit path multi-buffer logic when packets are either too big (count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is included in fragmented packet. Introduce xdp_sock::drain_cont and act upon this flag - when it is set, keep on consuming descriptors from AF_XDP Tx ring and put them directly onto Cq. Previously these descriptors were silently lost and could never be reached again. | ||||
| CVE-2026-74566 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: keys: make keyring key-chunk byte order agree with keyring_diff_objects() keyring_get_key_chunk() loads description bytes into the index chunk low address first, while keyring_diff_objects() numbers the first differing bit from the low end and folds the absolute byte index into the level without removing the inline-prefix offset the level already carries. The two disagree on byte order and bit position, so the array can be told two keys first differ at a bit that does not differ in the chunk the walker uses, letting crafted descriptions collide into one node. Load the chunk in the order keyring_diff_objects() assumes and drop the inline-prefix length when folding the byte index into the level. This only changes the in-memory ordering used to place keys within a keyring; add, search and read of non-colliding keys are unaffected. | ||||
| CVE-2026-74526 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix potential deadlock in mpi3mr_fault_uevent_emit mpi3mr_fault_uevent_emit() runs from the fault watchdog and reset paths where host I/O may already be blocked. GFP_KERNEL allocations here, both the local kzalloc_obj() and the ones inside kobject_uevent_env() itself, can trigger reclaim that waits on that blocked I/O and deadlock. Use memalloc_noio_save()/restore() to cover the whole call instead of just the local allocation. | ||||
| CVE-2026-74532 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Validate length before parsing diagnostics TLV btintel_diagnostics() accesses tlv->val[0] without first validating that the diagnostics VSE is long enough to contain that field, so may cause reading data beyond the received frame. Fix by validating the length before access. | ||||
| CVE-2026-74455 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: validate uCAN receive record lengths pcan_usb_fd_decode_buf() walks uCAN records packed in one USB receive buffer. Require each record to contain the fixed header for its type, and verify CAN payload bytes before copying them into the skb. | ||||
| CVE-2026-74458 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents The wait and bulk receive paths walk variable-length commands from a USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be dispatched, and the wait path copies a matching command into a fixed caller-owned struct kvaser_cmd using the device-provided length. Reject nonzero commands that do not contain the fixed header or that extend beyond the current USB buffer item. In the wait path, also reject a matching command that exceeds the destination before copying it. | ||||
| CVE-2026-74462 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: mark I2C adapter when hardware is powered down On some i.MX platforms, certain I2C client drivers keep a periodic workqueue which continues to trigger I2C transfers. During system suspend/resume, there exists a time window between: - suspend_noirq and the system entering suspend - the system starting to resume and resume_noirq In this window, the I2C controller resources such as clock and pinctrl may already be disabled or not yet restored. If a workqueue triggers an I2C transfer in this period, the driver attempts to access I2C registers while the hardware resources are unavailable, which may lead to system hang. Mark the I2C adapter as suspended during noirq suspend and block new transfers until resume, ensuring that I2C transfers are only issued when hardware resources are available. | ||||
| CVE-2026-74464 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko. | ||||
| CVE-2026-74466 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used. | ||||
| CVE-2026-74546 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read If the fan data becomes 0 between the FAN_DATA_VALID() check and the FAN_PERIOD_TO_RPM() conversion, it will result in a divide-by-zero crash due to a race with a concurrent update of the cached fan value. Fix a TOCTOU issue by reading fan data once. | ||||