Export limit exceeded: 348862 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (348862 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43194 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok <ok>| ok ok ok <x> \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link). | ||||
| CVE-2026-42521 | 2 Jenkins, Jenkins Project | 2 Matrix Authorization Strategy, Jenkins Matrix Authorization Strategy Plugin | 2026-05-06 | 6.5 Medium |
| Jenkins Matrix Authorization Strategy Plugin 2.0-beta-1 through 3.2.9 (both inclusive) invokes parameterless constructors of classes specified in configuration when deserializing inheritance strategies, without restricting the classes that can be instantiated, allowing attackers with Item/Configure permission to instantiate arbitrary types, which may lead to information disclosure or other impacts depending on the classes available on the classpath. | ||||
| CVE-2026-42522 | 2 Jenkins, Jenkins Project | 2 Github Branch Source, Jenkins Github Branch Source Plugin | 2026-05-06 | 4.3 Medium |
| A missing permission check in Jenkins GitHub Branch Source Plugin 1967.vdea_d580c1a_b_a_ and earlier allows attackers with Overall/Read permission to connect to an attacker-specified URL with attacker-specified GitHub App credentials. | ||||
| CVE-2026-7573 | 1 Velocidex | 1 Velociraptor | 2026-05-06 | 5 Medium |
| An authorization bypass (CWE-639) in the GetUserRoles gRPC API endpoint in Velocidex Velociraptor below version 0.76.5 allows any authenticated low-privilege user to retrieve the complete ACL policy (roles and permissions) for any user across all organizations by supplying targeted Name and Org parameters via a network request. | ||||
| CVE-2026-7111 | 1 Hmbrand | 2 Text::csv Xs, Text\ | 2026-05-06 | 8.4 High |
| Text::CSV_XS versions before 1.62 for Perl have a use-after-free when registered callbacks extend the Perl argument stack, which may enable type confusion or memory corruption. The Parse, print, getline, and getline_all methods invoke registered callbacks (for example after_parse, before_print, or on_error) and cache the Perl argument stack pointer across the call. If a callback extends the argument stack enough to trigger a reallocation, the return value is written through the stale pointer into the freed buffer, and the caller reads the original $self argument as the return value instead. Calling code that expects parsed data from getline_all receives the Text::CSV_XS object in its place, leading to logic errors or crashes. Text::CSV_XS objects used without any registered callbacks are not affected. | ||||
| CVE-2026-25243 | 1 Redis | 1 Redis | 2026-05-06 | 8.8 High |
| Redis is an in-memory data structure store. In versions of redis-server up to 8.6.3, the RESTORE command does not properly validate serialized values. An authenticated attacker with permission to execute RESTORE can supply a crafted serialized payload that triggers invalid memory access and may lead to remote code execution. A workaround is to restrict access to the RESTORE command with ACL rules. This is patched in version 8.6.3. | ||||
| CVE-2026-6788 | 1 Watchguard | 1 Single Watchguard Agent | 2026-05-06 | N/A |
| Uncontrolled Search Path Element vulnerability in WatchGuard Agent on Windows allows Using Malicious Files.This issue affects WatchGuard Agent before 1.25.03.0000. | ||||
| CVE-2026-6787 | 1 Watchguard | 1 Single Watchguard Agent | 2026-05-06 | N/A |
| Use of Hard-coded Cryptographic Key vulnerability in WatchGuard Agent on Windows allows Inclusion of Code in Existing Process.This issue affects WatchGuard Agent: before 1.25.03.0000. | ||||
| CVE-2026-41288 | 1 Watchguard | 1 Single Watchguard Agent | 2026-05-06 | N/A |
| Incorrect permission assignment for a resource in the patch management component of the WatchGuard Agent on Windows allows an authenticated local user to elevate their privileges to NT AUTHORITY\\SYSTEM. | ||||
| CVE-2026-41286 | 1 Watchguard Technologies | 1 Single Watchguard Agent | 2026-05-06 | N/A |
| Stack-based Buffer Overflow vulnerability in the WatchGuard Agent discovery service on Windows allows Overflow Buffers. An unauthenticated attacker on the same local network could exploit this vulnerability to crash the agent service. | ||||
| CVE-2026-43147 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV" This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"), which causes a deadlock by recursively taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of pci_stop_and_remove_bus_device(). For example with the following sequence of commands: $ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs $ echo 1 > /sys/bus/pci/devices/<pf>/remove A trimmed trace of the deadlock on a mlx5 device is as below: zsh/5715 is trying to acquire lock: 000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140 but task is already holding lock: 000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80 ... Call Trace: [<00000259778c4f90>] dump_stack_lvl+0xc0/0x110 [<00000259779c844e>] print_deadlock_bug+0x31e/0x330 [<00000259779c1908>] __lock_acquire+0x16c8/0x32f0 [<00000259779bffac>] lock_acquire+0x14c/0x350 [<00000259789643a6>] __mutex_lock_common+0xe6/0x1520 [<000002597896413c>] mutex_lock_nested+0x3c/0x50 [<00000259784a07e4>] sriov_disable+0x34/0x140 [<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core] [<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core] [<00000259784857fc>] pci_device_remove+0x3c/0xa0 [<000002597851012e>] device_release_driver_internal+0x18e/0x280 [<000002597847ae22>] pci_stop_bus_device+0x82/0xa0 [<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80 [<00000259784972c2>] remove_store+0x72/0x90 [<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200 [<0000025977d7241c>] vfs_write+0x24c/0x300 [<0000025977d72696>] ksys_write+0x86/0x110 [<000002597895b61c>] __do_syscall+0x14c/0x400 [<000002597896e0ee>] system_call+0x6e/0x90 This alone is not a complete fix as it restores the issue the cited commit tried to solve. A new fix will be provided as a follow on. | ||||
| CVE-2026-43160 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mfd: macsmc: Initialize mutex Initialize struct apple_smc's mutex in apple_smc_probe(). Using the mutex uninitialized surprisingly resulted only in occasional NULL pointer dereferences in apple_smc_read() calls from the probe() functions of sub devices. | ||||
| CVE-2026-43182 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: ccs: Avoid possible division by zero Calculating maximum M for scaler configuration involves dividing by MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably non-zero, the driver was missing the check it in fact was. Fix this. | ||||
| CVE-2026-43186 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data() On the receive path, __ioam6_fill_trace_data() uses trace->nodelen to decide how much data to write for each node. It trusts this field as-is from the incoming packet, with no consistency check against trace->type (the 24-bit field that tells which data items are present). A crafted packet can set nodelen=0 while setting type bits 0-21, causing the function to write ~100 bytes past the allocated region (into skb_shared_info), which corrupts adjacent heap memory and leads to a kernel panic. Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to derive the expected nodelen from the type field, and use it: - in ioam6_iptunnel.c (send path, existing validation) to replace the open-coded computation; - in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose nodelen is inconsistent with the type field, before any data is written. Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to 0xff1ffc00). | ||||
| CVE-2026-23631 | 1 Redis | 1 Redis | 2026-05-06 | 8.1 High |
| Redis is an in-memory data structure store. In all versions of redis-server with Lua scripting, an authenticated attacker can exploit the master-replica synchronization mechanism to trigger a use-after-free on replicas where replica-read-only is disabled or can be disabled, which may lead to remote code execution. A workaround is to prevent users from executing Lua scripts or avoid using replicas where replica-read-only is disabled. This is patched in version 8.6.3. | ||||
| CVE-2025-59809 | 1 Fortinet | 3 Fortisoar, Fortisoaron-premise, Fortisoarpaas | 2026-05-06 | 4.1 Medium |
| A server-side request forgery (ssrf) vulnerability [CWE-918] vulnerability in Fortinet FortiSOAR PaaS 7.6.4, FortiSOAR PaaS 7.6.0 through 7.6.2, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.4, FortiSOAR on-premise 7.6.0 through 7.6.2, FortiSOAR on-premise 7.5.0 through 7.5.2, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated attacker to discover services running on local ports via crafted requests. | ||||
| CVE-2026-21742 | 1 Fortinet | 3 Fortisoar, Fortisoaron-premise, Fortisoarpaas | 2026-05-06 | 5.4 Medium |
| A cleartext transmission of sensitive information vulnerability in Fortinet FortiSOAR PaaS 7.6.0 through 7.6.3, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.0 through 7.6.2, FortiSOAR on-premise 7.5.0 through 7.5.1, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated attacker to view cleartext password in response for Secure Message Exchange and Radius queries, if configured | ||||
| CVE-2026-22154 | 1 Fortinet | 3 Fortisoar, Fortisoaron-premise, Fortisoarpaas | 2026-05-06 | 4.4 Medium |
| An improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Fortinet FortiSOAR PaaS 7.6.0 through 7.6.3, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.0 through 7.6.3, FortiSOAR on-premise 7.5.0 through 7.5.2, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated remote attacker to perform a stored cross site scripting (XSS) attack via crafted HTTP Requests. | ||||
| CVE-2026-43141 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut Number of MW LUTs depends on NTB configuration and can be set to zero, in such scenario rounddown_pow_of_two will cause undefined behaviour and should not be performed. This patch ensures that rounddown_pow_of_two is called on valid value. | ||||
| CVE-2026-43164 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udplite: Fix null-ptr-deref in __udp_enqueue_schedule_skb(). syzbot reported null-ptr-deref of udp_sk(sk)->udp_prod_queue. [0] Since the cited commit, udp_lib_init_sock() can fail, as can udp_init_sock() and udpv6_init_sock(). Let's handle the error in udplite_sk_init() and udplitev6_sk_init(). [0]: BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:82 [inline] BUG: KASAN: null-ptr-deref in atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline] BUG: KASAN: null-ptr-deref in __udp_enqueue_schedule_skb+0x151/0x1480 net/ipv4/udp.c:1719 Read of size 4 at addr 0000000000000008 by task syz.2.18/2944 CPU: 1 UID: 0 PID: 2944 Comm: syz.2.18 Not tainted syzkaller #0 PREEMPTLAZY Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Call Trace: <IRQ> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 kasan_report+0xa2/0xe0 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 mm/kasan/generic.c:200 instrument_atomic_read include/linux/instrumented.h:82 [inline] atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline] __udp_enqueue_schedule_skb+0x151/0x1480 net/ipv4/udp.c:1719 __udpv6_queue_rcv_skb net/ipv6/udp.c:795 [inline] udpv6_queue_rcv_one_skb+0xa2e/0x1ad0 net/ipv6/udp.c:906 udp6_unicast_rcv_skb+0x227/0x380 net/ipv6/udp.c:1064 ip6_protocol_deliver_rcu+0xe17/0x1540 net/ipv6/ip6_input.c:438 ip6_input_finish+0x191/0x350 net/ipv6/ip6_input.c:489 NF_HOOK+0x354/0x3f0 include/linux/netfilter.h:318 ip6_input+0x16c/0x2b0 net/ipv6/ip6_input.c:500 NF_HOOK+0x354/0x3f0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6149 [inline] __netif_receive_skb+0xd3/0x370 net/core/dev.c:6262 process_backlog+0x4d6/0x1160 net/core/dev.c:6614 __napi_poll+0xae/0x320 net/core/dev.c:7678 napi_poll net/core/dev.c:7741 [inline] net_rx_action+0x60d/0xdc0 net/core/dev.c:7893 handle_softirqs+0x209/0x8d0 kernel/softirq.c:622 do_softirq+0x52/0x90 kernel/softirq.c:523 </IRQ> <TASK> __local_bh_enable_ip+0xe7/0x120 kernel/softirq.c:450 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline] __dev_queue_xmit+0x109c/0x2dc0 net/core/dev.c:4856 __ip6_finish_output net/ipv6/ip6_output.c:-1 [inline] ip6_finish_output+0x158/0x4e0 net/ipv6/ip6_output.c:219 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x342/0x580 net/ipv6/ip6_output.c:246 ip6_send_skb+0x1d7/0x3c0 net/ipv6/ip6_output.c:1984 udp_v6_send_skb+0x9a5/0x1770 net/ipv6/udp.c:1442 udp_v6_push_pending_frames+0xa2/0x140 net/ipv6/udp.c:1469 udpv6_sendmsg+0xfe0/0x2830 net/ipv6/udp.c:1759 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe5/0x270 net/socket.c:742 __sys_sendto+0x3eb/0x580 net/socket.c:2206 __do_sys_sendto net/socket.c:2213 [inline] __se_sys_sendto net/socket.c:2209 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2209 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd2/0xf20 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f67b4d9c629 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f67b5c98028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f67b5015fa0 RCX: 00007f67b4d9c629 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f67b4e32b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000040000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f67b5016038 R14: 00007f67b5015fa0 R15: 00007ffe3cb66dd8 </TASK> | ||||