Export limit exceeded: 378300 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378300 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72146 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: sh: rz-dmac: Move interrupt request after everything is set up Once the interrupt is requested, the interrupt handler may run immediately. Since the IRQ handler can access channel->ch_base, which is initialized only after requesting the IRQ, this may lead to invalid memory access. Likewise, the IRQ thread may access uninitialized data (the ld_free, ld_queue, and ld_active lists), which may also lead to issues. Request the interrupts only after everything is set up. To keep the error path simpler, use dmam_alloc_coherent() instead of dma_alloc_coherent(). | ||||
| CVE-2026-72145 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/intel/tpmi: use cleanup helpers in mem_write() In mem_write(), the temporary array returned by parse_int_array_user() must be released on all exit paths. Convert the array variable to use cleanup.h scope-based cleanup so it is freed automatically on return. This also moves the array declaration next to parse_int_array_user() as required by cleanup.h usage guidelines. | ||||
| CVE-2026-72144 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializes several resources after dell_setup_rfkill(), including the optional touchpad LED, keyboard backlight LED, battery hook, debugfs directory and dell-laptop notifier. If a later LED or backlight registration fails, the error path only tears down the battery hook and rfkill resources. This leaves the notifier, debugfs directory, keyboard backlight LED and optional touchpad LED registered after dell_init() returns an error. Add the missing cleanup calls before tearing down rfkill. | ||||
| CVE-2026-72143 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Restore SST-PP control to all domains The SST-PP control offset is only restored to power domain 0 after resume. During suspend, control values are read and stored for all power domains. Use pd_info->sst_base instead of power_domain_info->sst_base, which only points to power domain 0 base address. | ||||
| CVE-2026-72139 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: defer md5sig_info kfree past RCU grace period in tcp_connect The md5+ao reconciliation in tcp_connect() (net/ipv4/tcp_output.c) has two symmetric branches: if (needs_md5) { tcp_ao_destroy_sock(sk, false); } else if (needs_ao) { tcp_clear_md5_list(sk); kfree(rcu_replace_pointer(tp->md5sig_info, NULL, ...)); } Both branches free a per-socket auth-info object while the socket is in TCP_SYN_SENT and is already on the inet ehash (inserted by inet_hash_connect() in tcp_v4_connect()). Both branches are reachable by softirq RX-path readers that load the corresponding info pointer via implicit RCU before bh_lock_sock_nested() is taken. The needs_md5 branch is fixed in the prior patch by re-introducing the call_rcu() free in tcp_ao_destroy_sock(): the equivalent per-key loop runs inside tcp_ao_info_free_rcu(), the RCU callback, so by the time it frees each tcp_ao_key all softirq readers that captured the container have already completed rcu_read_unlock(). The needs_ao branch is not symmetric in the same way. The container free can be deferred via kfree_rcu(md5sig, rcu) -- struct tcp_md5sig_info already has the required rcu member (include/net/tcp.h:1999-2002), and the rest of the tree already does this in the tcp_md5sig_info_add() rollback paths (net/ipv4/tcp_ipv4.c:1410, 1436). But the per-key teardown is done by tcp_clear_md5_list() in process context BEFORE the container's RCU grace period: it walks &md5sig->head and frees each tcp_md5sig_key with bare hlist_del + kfree. A concurrent softirq reader in __tcp_md5_do_lookup() / __tcp_md5_do_lookup_exact() (tcp_ipv4.c:1253, 1298) walks the same list via hlist_for_each_entry_rcu() and races with that bare kfree on the keys themselves -- a per-key slab use-after-free of the same class as the TCP-AO bug, on the same race window. Fix this in two halves: 1. Convert the bare kfree() in tcp_connect() to kfree_rcu() so the md5sig_info container joins the rest of the md5sig lifecycle. The local-variable lift is mechanical and required because kfree_rcu() is a macro that expects an lvalue. 2. Make tcp_clear_md5_list() RCU-safe by replacing hlist_del + kfree(key) with hlist_del_rcu + kfree_rcu(key, rcu). struct tcp_md5sig_key already carries the rcu member (include/net/tcp.h:1995) and tcp_md5_do_del() (net/ipv4/tcp_ipv4.c:1456) already uses kfree_rcu, so this restores the lifecycle invariant the rest of the file follows rather than introducing a one-off. The other caller of tcp_clear_md5_list() is tcp_md5_destruct_sock() (net/ipv4/tcp.c:412), which runs from the sock destructor when the socket is already unhashed and unreachable; the extra grace period there is unnecessary but harmless. Making the helper unconditionally RCU-safe is the cleaner contract. The needs_ao branch is not reachable by the userns reproducer used to demonstrate the AO-side splat (the repro installs both keys but ends up in the needs_md5 branch because the connect peer matches the MD5 key, not the AO key); however the symmetric race exists and a maintainer touching this code should not have to think about which branch escapes RCU and which one does not. [also credits to Qihang, who found that this races with tcp-diag] | ||||
| CVE-2026-72137 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: nat_keepalive: avoid double free on send error nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6 send helper reports an error. That cleanup is only correct before the skb is handed to the output path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the networking stack may already have consumed the skb before returning an error, so freeing it again is unsafe. Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4() and nat_keepalive_send_ipv6(), where the caller still owns the skb, and keep nat_keepalive_send() responsible only for family dispatch and the unsupported-family cleanup path. | ||||
| CVE-2026-72136 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changelink() operates on at most two netns, dev_net(dev) and the interface link netns xi->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in xi->net can rewrite an interface that lives in xi->net. Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72133 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: Fix completion initialization order before devm_request_irq() The driver calls devm_request_irq() before initializing the completion used by the interrupt handler. Because the interrupt may occur immediately after devm_request_irq(), the handler may execute before init_completion(). This may result in calling complete() on an uninitialized completion, causing undefined behavior. This has been observed with KASAN. Fix this by initializing the completion before registering the IRQ. | ||||
| CVE-2026-72129 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and the block backend reads far past the first inline page. num_pages(len) also ignores the offset, so an in-bounds offset whose [off, off+len) span crosses a page boundary under-counts the scatterlist. Map the offset properly: split it into a page index and an in-page offset, start the scatterlist at that page, and size the page count from page_off + len. Because the request scatterlist may now start at inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL identity test in nvmet_rdma_release_rsp() to a range test; otherwise the persistent inline scatterlist is mistaken for an allocated one and nvmet_req_free_sgls() frees an inline page (and warns in free_large_kmalloc()). | ||||
| CVE-2026-72127 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netdev-genl: report NAPI thread PID in the caller's pid namespace netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID using task_pid_nr(), which returns the PID in the initial pid namespace. NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family is netnsok, so a caller in a child pid namespace can issue it. That caller then sees the kthread's global PID, even though the kthread is not visible in its pid namespace, where the value should be 0. Translate the PID through the caller's pid namespace, the same way commit 3799c2570982 ("io_uring/fdinfo: translate SqThread PID through caller's pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both run synchronously in the caller's context, so task_active_pid_ns(current) is the caller's pid namespace. | ||||
| CVE-2026-72126 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: use unconditional synchronize_rcu() in isotp_release() isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister() and clears so->bound without waiting for a grace period. isotp_release() uses so->bound to decide whether it needs to call synchronize_rcu() before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it skips that synchronize_rcu() and can cancel the timer while an in-flight isotp_rcv() is still executing and about to re-arm it via isotp_send_fc(), leading to a use-after-free timer callback on the freed socket. sakisho-bot remarked a problem with rtnl_lock held in isotp_notify(), therefore make isotp_release() always call synchronize_rcu() before cancelling the timers, regardless of so->bound. This still closes the original race (isotp_notify() clearing so->bound without waiting for in-flight isotp_rcv() callers before isotp_release() cancels the RX timer) without adding any RCU wait to the netdevice notifier path. | ||||
| CVE-2026-72125 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER isotp_release() looked up the bound network device via dev_get_by_index() using the stored ifindex. During device unregistration the device is unlisted from the ifindex hash before the NETDEV_UNREGISTER notifier chain runs, so a concurrent isotp_release() could find no device, skip can_rx_unregister() entirely, and still proceed to free the socket. Since isotp_release() had already removed itself from the isotp notifier list at that point, isotp_notify() would never get a chance to clean up either, leaving a stale CAN filter that keeps pointing at the freed socket. Fix this the same way raw.c already does: hold a tracked reference to the bound net_device in the socket (so->dev/so->dev_tracker) from bind() onward instead of re-resolving it from the ifindex, and serialize bind()/release() with rtnl_lock() so that so->dev is always consistent with what the NETDEV_UNREGISTER notifier sees. so->dev stays valid regardless of ifindex-hash unlisting, and is only ever cleared by whichever of isotp_release()/isotp_notify() gets there first, so the filter is always removed exactly once. isotp_bind() now rejects a (re)bind with -EAGAIN while so->[tx|rx].state isn't ISOTP_IDLE yet, so a timer left running by a prior NETDEV_UNREGISTER can't act on a newly bound so->ifindex. Both checks share the same lock_sock() section, so there is no window in which a concurrent isotp_notify() clearing so->bound could be missed. | ||||
| CVE-2026-72124 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes it to check so->tx.state is ISOTP_IDLE, switch it to ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf() already run under this lock via isotp_rcv(), and isotp_rcv_echo() now takes it itself, so none of them can ever observe a transfer mid-claim. This also means a transfer can no longer be handed to sendmsg()'s cleanup paths (signal or send error) while another thread is concurrently claiming or finishing it, so those paths can cancel timers and reset the state unconditionally. isotp_release() claims the socket the same way, so a racing sendmsg() sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending. Only the hrtimer callbacks stay outside so->rx_lock, since they run under so->rx_lock's cancellation elsewhere and taking it themselves would deadlock. so->tx_gen lets them recognize whether the transfer they timed out is still the one currently active, so they don't report an error against a transfer that has since completed or been superseded. | ||||
| CVE-2026-72122 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silently turning a socket bound to a specific CAN interface into one that also matches "any" interface. Keep the lockless bo->bound check purely as a fast-path reject, and move the ifindex read (and a bo->bound re-check) into the locked section, where every writer already serializes. This removes the possibility of observing the two fields torn against each other, rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs on two independently updated fields. Annotate the now-purely-lockless bo->bound accesses consistently across all its write sites. Also fix bcm_rx_setup() silently returning success when the target device disappears concurrently instead of reporting -ENODEV, so a broken RX op is no longer left registered as if it had succeeded. | ||||
| CVE-2026-72121 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous access to timer values that can be overwritten in bcm_rx_setup() when updating timer and filter content while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler() run concurrently on incoming CAN traffic. Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter (nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new per-op bcm_rx_update_lock, taken with the matching scope in the RX handlers. memcpy_from_msg() is staged into a temporary buffer before the lock is taken, since it can sleep and must not run under a spinlock. hrtimer_cancel() is always called without bcm_rx_update_lock held, since bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a running callback would otherwise deadlock against the canceller. Also close a related race: bcm_rx_setup() cleared the RTR flag in the stored reply frame's can_id as a separate, unprotected step after the frame content was already installed, so a concurrent bcm_rx_handler() could transmit a stale reply with CAN_RTR_FLAG still set. Fold that normalization into the initial frame preparation instead (on the staged buffer for updates, directly on op->frames pre-registration for new ops), so the installed frame is always atomically self-consistent. bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected snapshot of op->flags before deciding whether to call bcm_can_tx(), but does not hold the lock across that call. Also take a lock-protected snapshot of the currframe in bcm_can_tx() to avoid partly overwrites by content updates in bcm_tx_setup(). Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset op->currframe between the two locked sections in bcm_can_tx(). Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler(). kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock. | ||||
| CVE-2026-72120 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing rcu list annotations and operations sashiko-bot remarked the missing use of list_add_rcu() in bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure when bcm_proc_show() traverses the bcm_op's under rcu_read_lock(). To cover all initial settings of the bcm_op's the list_add_rcu() calls are moved to the end of the setup code. While at it, also fix the mirroring removal side: bcm_release() called bcm_remove_op() - which frees the op via call_rcu() - on ops that were still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first. Unlink each op with list_del_rcu() before handing it to bcm_remove_op(), matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op(). | ||||
| CVE-2026-72117 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler() For an rx op subscribed on all interfaces (ifindex == 0), the same op is registered once in the shared per-netns wildcard filter list, so bcm_rx_handler() can run concurrently on different CPUs for frames arriving on different net devices. op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was taken, allowing concurrent writers to race each other - including a torn store of the 64-bit rx_stamp on 32-bit platforms. Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex of the very same frame whose content it is delivering. So the assignment is placed in the same unbroken bcm_rx_update_lock section as the content comparison. As a side effect, the RTR-request frame feature (which never reach bcm_send_to_user()) no longer updates rx_stamp/rx_ifindex, since only the notification path needs them. | ||||
| CVE-2026-72116 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic transmission re-arming its hrtimer indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer prevents the runaway timer and any injection into a later reused ifindex, since nothing else calls bcm_can_tx() for the op until an explicit TX_SETUP update re-arms it. Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops, the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup() always rejects ifindex 0, so clearing it would strand the op: neither a later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could ever find it again, since both require an exact ifindex match. | ||||
| CVE-2026-72115 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: track a single source interface for ANYDEV timeout/throttle ops An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or throttle timer has no defined semantics when matching frames arrive from several interfaces: bcm_rx_handler() can run concurrently for the same op on different CPUs, racing hrtimer_cancel()/ bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing spurious RX_TIMEOUT notifications and last_frames corruption. The same concurrency lets throttled multiplex frames from different interfaces clobber the single rx_ifindex/rx_stamp fields shared by the op. Add op->if_detected to track the first interface that delivers a matching frame while a timeout/throttle timer is configured, and reject frames from any other interface for that op. The claim is decided in bcm_rx_handler() before hrtimer_cancel() touches op->timer, so a rejected frame can never disturb the claimed interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME, independent of kt_ival1/kt_ival2, since those may briefly hold a stale value from an earlier non-RTR configuration. The claim is released in bcm_notify() on NETDEV_UNREGISTER and in bcm_rx_setup() when SETTIMER reconfigures the timer values. A (re-)claim is only possible on CAN devices in NETREG_REGISTERED dev->reg_state to cover the release in bcm_notify() where reg_state becomes NETREG_UNREGISTERING until synchronize_net(). | ||||
| CVE-2026-72113 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from the ifindex table, that lookup fails and can_rx_unregister() is silently skipped, leaving a stale CAN filter pointing at the soon-to-be-freed bcm_op/socket. Hold a netdev_hold()/netdev_put() tracked reference on op->rx_reg_dev from the moment the rx filter is registered in bcm_rx_setup() until it is unregistered in bcm_rx_unreg(), and use that reference directly in bcm_release() and bcm_delete_rx_op() instead of re-looking the device up by ifindex. | ||||