Export limit exceeded: 35583 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (35583 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49558 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: double hook unregistration in netns path __nft_release_hooks() is called from pre_netns exit path which unregisters the hooks, then the NETDEV_UNREGISTER event is triggered which unregisters the hooks again. [ 565.221461] WARNING: CPU: 18 PID: 193 at net/netfilter/core.c:495 __nf_unregister_net_hook+0x247/0x270 [...] [ 565.246890] CPU: 18 PID: 193 Comm: kworker/u64:1 Tainted: G E 5.18.0-rc7+ #27 [ 565.253682] Workqueue: netns cleanup_net [ 565.257059] RIP: 0010:__nf_unregister_net_hook+0x247/0x270 [...] [ 565.297120] Call Trace: [ 565.300900] <TASK> [ 565.304683] nf_tables_flowtable_event+0x16a/0x220 [nf_tables] [ 565.308518] raw_notifier_call_chain+0x63/0x80 [ 565.312386] unregister_netdevice_many+0x54f/0xb50 Unregister and destroy netdev hook from netns pre_exit via kfree_rcu so the NETDEV_UNREGISTER path see unregistered hooks. | ||||
| CVE-2022-49559 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Drop WARNs that assert a triple fault never "escapes" from L2 Remove WARNs that sanity check that KVM never lets a triple fault for L2 escape and incorrectly end up in L1. In normal operation, the sanity check is perfectly valid, but it incorrectly assumes that it's impossible for userspace to induce KVM_REQ_TRIPLE_FAULT without bouncing through KVM_RUN (which guarantees kvm_check_nested_state() will see and handle the triple fault). The WARN can currently be triggered if userspace injects a machine check while L2 is active and CR4.MCE=0. And a future fix to allow save/restore of KVM_REQ_TRIPLE_FAULT, e.g. so that a synthesized triple fault isn't lost on migration, will make it trivially easy for userspace to trigger the WARN. Clearing KVM_REQ_TRIPLE_FAULT when forcibly leaving guest mode is tempting, but wrong, especially if/when the request is saved/restored, e.g. if userspace restores events (including a triple fault) and then restores nested state (which may forcibly leave guest mode). Ignoring the fact that KVM doesn't currently provide the necessary APIs, it's userspace's responsibility to manage pending events during save/restore. ------------[ cut here ]------------ WARNING: CPU: 7 PID: 1399 at arch/x86/kvm/vmx/nested.c:4522 nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel] Modules linked in: kvm_intel kvm irqbypass CPU: 7 PID: 1399 Comm: state_test Not tainted 5.17.0-rc3+ #808 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel] Call Trace: <TASK> vmx_leave_nested+0x30/0x40 [kvm_intel] vmx_set_nested_state+0xca/0x3e0 [kvm_intel] kvm_arch_vcpu_ioctl+0xf49/0x13e0 [kvm] kvm_vcpu_ioctl+0x4b9/0x660 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2022-49458 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: don't free the IRQ if it was not requested As msm_drm_uninit() is called from the msm_drm_init() error path, additional care should be necessary as not to call the free_irq() for the IRQ that was not requested before (because an error occured earlier than the request_irq() call). This fixed the issue reported with the following backtrace: [ 8.571329] Trying to free already-free IRQ 187 [ 8.571339] WARNING: CPU: 0 PID: 76 at kernel/irq/manage.c:1895 free_irq+0x1e0/0x35c [ 8.588746] Modules linked in: pmic_glink pdr_interface fastrpc qrtr_smd snd_soc_hdmi_codec msm fsa4480 gpu_sched drm_dp_aux_bus qrtr i2c_qcom_geni crct10dif_ce qcom_stats qcom_q6v5_pas drm_display_helper gpi qcom_pil_info drm_kms_helper qcom_q6v5 qcom_sysmon qcom_common qcom_glink_smem qcom_rng mdt_loader qmi_helpers phy_qcom_qmp ufs_qcom typec qnoc_sm8350 socinfo rmtfs_mem fuse drm ipv6 [ 8.624154] CPU: 0 PID: 76 Comm: kworker/u16:2 Not tainted 5.18.0-rc5-next-20220506-00033-g6cee8cab6089-dirty #419 [ 8.624161] Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT) [ 8.641496] Workqueue: events_unbound deferred_probe_work_func [ 8.647510] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.654681] pc : free_irq+0x1e0/0x35c [ 8.658454] lr : free_irq+0x1e0/0x35c [ 8.662228] sp : ffff800008ab3950 [ 8.665642] x29: ffff800008ab3950 x28: 0000000000000000 x27: ffff16350f56a700 [ 8.672994] x26: ffff1635025df080 x25: ffff16350251badc x24: ffff16350251bb90 [ 8.680343] x23: 0000000000000000 x22: 00000000000000bb x21: ffff16350e8f9800 [ 8.687690] x20: ffff16350251ba00 x19: ffff16350cbd5880 x18: ffffffffffffffff [ 8.695039] x17: 0000000000000000 x16: ffffa2dd12179434 x15: ffffa2dd1431d02d [ 8.702391] x14: 0000000000000000 x13: ffffa2dd1431d028 x12: 662d79646165726c [ 8.709740] x11: ffffa2dd13fd2438 x10: 000000000000000a x9 : 00000000000000bb [ 8.717111] x8 : ffffa2dd13fd23f0 x7 : ffff800008ab3750 x6 : 00000000fffff202 [ 8.724487] x5 : ffff16377e870a18 x4 : 00000000fffff202 x3 : ffff735a6ae1b000 [ 8.731851] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1635015f8000 [ 8.739217] Call trace: [ 8.741755] free_irq+0x1e0/0x35c [ 8.745198] msm_drm_uninit.isra.0+0x14c/0x294 [msm] [ 8.750548] msm_drm_bind+0x28c/0x5d0 [msm] [ 8.755081] try_to_bring_up_aggregate_device+0x164/0x1d0 [ 8.760657] __component_add+0xa0/0x170 [ 8.764626] component_add+0x14/0x20 [ 8.768337] dp_display_probe+0x2a4/0x464 [msm] [ 8.773242] platform_probe+0x68/0xe0 [ 8.777043] really_probe.part.0+0x9c/0x28c [ 8.781368] __driver_probe_device+0x98/0x144 [ 8.785871] driver_probe_device+0x40/0x140 [ 8.790191] __device_attach_driver+0xb4/0x120 [ 8.794788] bus_for_each_drv+0x78/0xd0 [ 8.798751] __device_attach+0xdc/0x184 [ 8.802713] device_initial_probe+0x14/0x20 [ 8.807031] bus_probe_device+0x9c/0xa4 [ 8.810991] deferred_probe_work_func+0x88/0xc0 [ 8.815667] process_one_work+0x1d0/0x320 [ 8.819809] worker_thread+0x14c/0x444 [ 8.823688] kthread+0x10c/0x110 [ 8.827036] ret_from_fork+0x10/0x20 Patchwork: https://patchwork.freedesktop.org/patch/485422/ | ||||
| CVE-2022-49460 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: rk3399_dmc: Disable edev on remove() Otherwise we hit an unablanced enable-count when unbinding the DFI device: [ 1279.659119] ------------[ cut here ]------------ [ 1279.659179] WARNING: CPU: 2 PID: 5638 at drivers/devfreq/devfreq-event.c:360 devfreq_event_remove_edev+0x84/0x8c ... [ 1279.659352] Hardware name: Google Kevin (DT) [ 1279.659363] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 1279.659371] pc : devfreq_event_remove_edev+0x84/0x8c [ 1279.659380] lr : devm_devfreq_event_release+0x1c/0x28 ... [ 1279.659571] Call trace: [ 1279.659582] devfreq_event_remove_edev+0x84/0x8c [ 1279.659590] devm_devfreq_event_release+0x1c/0x28 [ 1279.659602] release_nodes+0x1cc/0x244 [ 1279.659611] devres_release_all+0x44/0x60 [ 1279.659621] device_release_driver_internal+0x11c/0x1ac [ 1279.659629] device_driver_detach+0x20/0x2c [ 1279.659641] unbind_store+0x7c/0xb0 [ 1279.659650] drv_attr_store+0x2c/0x40 [ 1279.659663] sysfs_kf_write+0x44/0x58 [ 1279.659672] kernfs_fop_write_iter+0xf4/0x190 [ 1279.659684] vfs_write+0x2b0/0x2e4 [ 1279.659693] ksys_write+0x80/0xec [ 1279.659701] __arm64_sys_write+0x24/0x30 [ 1279.659714] el0_svc_common+0xf0/0x1d8 [ 1279.659724] do_el0_svc_compat+0x28/0x3c [ 1279.659738] el0_svc_compat+0x10/0x1c [ 1279.659746] el0_sync_compat_handler+0xa8/0xcc [ 1279.659758] el0_sync_compat+0x188/0x1c0 [ 1279.659768] ---[ end trace cec200e5094155b4 ]--- | ||||
| CVE-2022-49422 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix the error handling path in idxd_cdev_register() If a call to alloc_chrdev_region() fails, the already allocated resources are leaking. Add the needed error handling path to fix the leak. | ||||
| CVE-2022-49543 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ath11k: fix the warning of dev_wake in mhi_pm_disable_transition() When test device recovery with below command, it has warning in message as below. echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash warning message: [ 1965.642121] ath11k_pci 0000:06:00.0: simulating firmware assert crash [ 1968.471364] ieee80211 phy0: Hardware restart was requested [ 1968.511305] ------------[ cut here ]------------ [ 1968.511368] WARNING: CPU: 3 PID: 1546 at drivers/bus/mhi/core/pm.c:505 mhi_pm_disable_transition+0xb37/0xda0 [mhi] [ 1968.511443] Modules linked in: ath11k_pci ath11k mac80211 libarc4 cfg80211 qmi_helpers qrtr_mhi mhi qrtr nvme nvme_core [ 1968.511563] CPU: 3 PID: 1546 Comm: kworker/u17:0 Kdump: loaded Tainted: G W 5.17.0-rc3-wt-ath+ #579 [ 1968.511629] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 1968.511704] Workqueue: mhi_hiprio_wq mhi_pm_st_worker [mhi] [ 1968.511787] RIP: 0010:mhi_pm_disable_transition+0xb37/0xda0 [mhi] [ 1968.511870] Code: a9 fe ff ff 4c 89 ff 44 89 04 24 e8 03 46 f6 e5 44 8b 04 24 41 83 f8 01 0f 84 21 fe ff ff e9 4c fd ff ff 0f 0b e9 af f8 ff ff <0f> 0b e9 5c f8 ff ff 48 89 df e8 da 9e ee e3 e9 12 fd ff ff 4c 89 [ 1968.511923] RSP: 0018:ffffc900024efbf0 EFLAGS: 00010286 [ 1968.511969] RAX: 00000000ffffffff RBX: ffff88811d241250 RCX: ffffffffc0176922 [ 1968.512014] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff888118a90a24 [ 1968.512059] RBP: ffff888118a90800 R08: 0000000000000000 R09: ffff888118a90a27 [ 1968.512102] R10: ffffed1023152144 R11: 0000000000000001 R12: ffff888118a908ac [ 1968.512229] R13: ffff888118a90928 R14: dffffc0000000000 R15: ffff888118a90a24 [ 1968.512310] FS: 0000000000000000(0000) GS:ffff888234200000(0000) knlGS:0000000000000000 [ 1968.512405] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1968.512493] CR2: 00007f5538f443a8 CR3: 000000016dc28001 CR4: 00000000003706e0 [ 1968.512587] Call Trace: [ 1968.512672] <TASK> [ 1968.512751] ? _raw_spin_unlock_irq+0x1f/0x40 [ 1968.512859] mhi_pm_st_worker+0x3ac/0x790 [mhi] [ 1968.512959] ? mhi_pm_mission_mode_transition.isra.0+0x7d0/0x7d0 [mhi] [ 1968.513063] process_one_work+0x86a/0x1400 [ 1968.513184] ? pwq_dec_nr_in_flight+0x230/0x230 [ 1968.513312] ? move_linked_works+0x125/0x290 [ 1968.513416] worker_thread+0x6db/0xf60 [ 1968.513536] ? process_one_work+0x1400/0x1400 [ 1968.513627] kthread+0x241/0x2d0 [ 1968.513733] ? kthread_complete_and_exit+0x20/0x20 [ 1968.513821] ret_from_fork+0x22/0x30 [ 1968.513924] </TASK> Reason is mhi_deassert_dev_wake() from mhi_device_put() is called but mhi_assert_dev_wake() from __mhi_device_get_sync() is not called in progress of recovery. Commit 8e0559921f9a ("bus: mhi: core: Skip device wake in error or shutdown state") add check for the pm_state of mhi in __mhi_device_get_sync(), and the pm_state is not the normal state untill recovery is completed, so it leads the dev_wake is not 0 and above warning print in mhi_pm_disable_transition() while checking mhi_cntrl->dev_wake. Add check in ath11k_pci_write32()/ath11k_pci_read32() to skip call mhi_device_put() if mhi_device_get_sync() does not really do wake, then the warning gone. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 | ||||
| CVE-2022-49169 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: use spin_lock to avoid hang [14696.634553] task:cat state:D stack: 0 pid:1613738 ppid:1613735 flags:0x00000004 [14696.638285] Call Trace: [14696.639038] <TASK> [14696.640032] __schedule+0x302/0x930 [14696.640969] schedule+0x58/0xd0 [14696.641799] schedule_preempt_disabled+0x18/0x30 [14696.642890] __mutex_lock.constprop.0+0x2fb/0x4f0 [14696.644035] ? mod_objcg_state+0x10c/0x310 [14696.645040] ? obj_cgroup_charge+0xe1/0x170 [14696.646067] __mutex_lock_slowpath+0x13/0x20 [14696.647126] mutex_lock+0x34/0x40 [14696.648070] stat_show+0x25/0x17c0 [f2fs] [14696.649218] seq_read_iter+0x120/0x4b0 [14696.650289] ? aa_file_perm+0x12a/0x500 [14696.651357] ? lru_cache_add+0x1c/0x20 [14696.652470] seq_read+0xfd/0x140 [14696.653445] full_proxy_read+0x5c/0x80 [14696.654535] vfs_read+0xa0/0x1a0 [14696.655497] ksys_read+0x67/0xe0 [14696.656502] __x64_sys_read+0x1a/0x20 [14696.657580] do_syscall_64+0x3b/0xc0 [14696.658671] entry_SYSCALL_64_after_hwframe+0x44/0xae [14696.660068] RIP: 0033:0x7efe39df1cb2 [14696.661133] RSP: 002b:00007ffc8badd948 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [14696.662958] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007efe39df1cb2 [14696.664757] RDX: 0000000000020000 RSI: 00007efe399df000 RDI: 0000000000000003 [14696.666542] RBP: 00007efe399df000 R08: 00007efe399de010 R09: 00007efe399de010 [14696.668363] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000 [14696.670155] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [14696.671965] </TASK> [14696.672826] task:umount state:D stack: 0 pid:1614985 ppid:1614984 flags:0x00004000 [14696.674930] Call Trace: [14696.675903] <TASK> [14696.676780] __schedule+0x302/0x930 [14696.677927] schedule+0x58/0xd0 [14696.679019] schedule_preempt_disabled+0x18/0x30 [14696.680412] __mutex_lock.constprop.0+0x2fb/0x4f0 [14696.681783] ? destroy_inode+0x65/0x80 [14696.683006] __mutex_lock_slowpath+0x13/0x20 [14696.684305] mutex_lock+0x34/0x40 [14696.685442] f2fs_destroy_stats+0x1e/0x60 [f2fs] [14696.686803] f2fs_put_super+0x158/0x390 [f2fs] [14696.688238] generic_shutdown_super+0x7a/0x120 [14696.689621] kill_block_super+0x27/0x50 [14696.690894] kill_f2fs_super+0x7f/0x100 [f2fs] [14696.692311] deactivate_locked_super+0x35/0xa0 [14696.693698] deactivate_super+0x40/0x50 [14696.694985] cleanup_mnt+0x139/0x190 [14696.696209] __cleanup_mnt+0x12/0x20 [14696.697390] task_work_run+0x64/0xa0 [14696.698587] exit_to_user_mode_prepare+0x1b7/0x1c0 [14696.700053] syscall_exit_to_user_mode+0x27/0x50 [14696.701418] do_syscall_64+0x48/0xc0 [14696.702630] entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2022-49173 | 1 Linux | 1 Linux Kernel | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: fsi: Implement a timeout for polling status The data transfer routines must poll the status register to determine when more data can be shifted in or out. If the hardware gets into a bad state, these polling loops may never exit. Prevent this by returning an error if a timeout is exceeded. | ||||
| CVE-2022-49552 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix combination of jit blinding and pointers to bpf subprogs. The combination of jit blinding and pointers to bpf subprogs causes: [ 36.989548] BUG: unable to handle page fault for address: 0000000100000001 [ 36.990342] #PF: supervisor instruction fetch in kernel mode [ 36.990968] #PF: error_code(0x0010) - not-present page [ 36.994859] RIP: 0010:0x100000001 [ 36.995209] Code: Unable to access opcode bytes at RIP 0xffffffd7. [ 37.004091] Call Trace: [ 37.004351] <TASK> [ 37.004576] ? bpf_loop+0x4d/0x70 [ 37.004932] ? bpf_prog_3899083f75e4c5de_F+0xe3/0x13b The jit blinding logic didn't recognize that ld_imm64 with an address of bpf subprogram is a special instruction and proceeded to randomize it. By itself it wouldn't have been an issue, but jit_subprogs() logic relies on two step process to JIT all subprogs and then JIT them again when addresses of all subprogs are known. Blinding process in the first JIT phase caused second JIT to miss adjustment of special ld_imm64. Fix this issue by ignoring special ld_imm64 instructions that don't have user controlled constants and shouldn't be blinded. | ||||
| CVE-2024-32499 | 1 Newforma | 1 Project Center | 2025-10-22 | 4.9 Medium |
| Newforma Project Center Server through 2023.3.0.32259 allows remote code execution because .NET Remoting is exposed. | ||||
| CVE-2025-40662 | 1 Acc | 1 Dm Corporative Cms | 2025-10-22 | 7.5 High |
| Absolute path disclosure vulnerability in DM Corporative CMS. This vulnerability allows an attacker to view the contents of webroot/file, if navigating to a non-existent file. | ||||
| CVE-2025-58290 | 1 Huawei | 1 Harmonyos | 2025-10-21 | 3.3 Low |
| Denial of service (DoS) vulnerability in the office service. Successful exploitation of this vulnerability may affect availability. | ||||
| CVE-2022-49333 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, pair only capable devices OFFLOADS paring using devcom is possible only on devices that support LAG. Filter based on lag capabilities. This fixes an issue where mlx5_get_next_phys_dev() was called without holding the interface lock. This issue was found when commit bc4c2f2e0179 ("net/mlx5: Lag, filter non compatible devices") added an assert that verifies the interface lock is held. WARNING: CPU: 9 PID: 1706 at drivers/net/ethernet/mellanox/mlx5/core/dev.c:642 mlx5_get_next_phys_dev+0xd2/0x100 [mlx5_core] Modules linked in: mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm ib_uverbs ib_core overlay fuse [last unloaded: mlx5_core] CPU: 9 PID: 1706 Comm: devlink Not tainted 5.18.0-rc7+ #11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_get_next_phys_dev+0xd2/0x100 [mlx5_core] Code: 02 00 75 48 48 8b 85 80 04 00 00 5d c3 31 c0 5d c3 be ff ff ff ff 48 c7 c7 08 41 5b a0 e8 36 87 28 e3 85 c0 0f 85 6f ff ff ff <0f> 0b e9 68 ff ff ff 48 c7 c7 0c 91 cc 84 e8 cb 36 6f e1 e9 4d ff RSP: 0018:ffff88811bf47458 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88811b398000 RCX: 0000000000000001 RDX: 0000000080000000 RSI: ffffffffa05b4108 RDI: ffff88812daaaa78 RBP: ffff88812d050380 R08: 0000000000000001 R09: ffff88811d6b3437 R10: 0000000000000001 R11: 00000000fddd3581 R12: ffff88815238c000 R13: ffff88812d050380 R14: ffff8881018aa7e0 R15: ffff88811d6b3428 FS: 00007fc82e18ae80(0000) GS:ffff88842e080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9630d1b421 CR3: 0000000149802004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mlx5_esw_offloads_devcom_event+0x99/0x3b0 [mlx5_core] mlx5_devcom_send_event+0x167/0x1d0 [mlx5_core] esw_offloads_enable+0x1153/0x1500 [mlx5_core] ? mlx5_esw_offloads_controller_valid+0x170/0x170 [mlx5_core] ? wait_for_completion_io_timeout+0x20/0x20 ? mlx5_rescan_drivers_locked+0x318/0x810 [mlx5_core] mlx5_eswitch_enable_locked+0x586/0xc50 [mlx5_core] ? mlx5_eswitch_disable_pf_vf_vports+0x1d0/0x1d0 [mlx5_core] ? mlx5_esw_try_lock+0x1b/0xb0 [mlx5_core] ? mlx5_eswitch_enable+0x270/0x270 [mlx5_core] ? __debugfs_create_file+0x260/0x3e0 mlx5_devlink_eswitch_mode_set+0x27e/0x870 [mlx5_core] ? mutex_lock_io_nested+0x12c0/0x12c0 ? esw_offloads_disable+0x250/0x250 [mlx5_core] ? devlink_nl_cmd_trap_get_dumpit+0x470/0x470 ? rcu_read_lock_sched_held+0x3f/0x70 devlink_nl_cmd_eswitch_set_doit+0x217/0x620 | ||||
| CVE-2022-49338 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules CT cleanup assumes that all tc rules were deleted first, and so is free to delete the CT shared resources (e.g the dr_action fwd_action which is shared for all tuples). But currently for uplink, this is happens in reverse, causing the below trace. CT cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_cleanup_uplink_rep_tx()-> mlx5e_rep_tc_cleanup()->mlx5e_tc_esw_cleanup()-> mlx5_tc_ct_clean() Only afterwards, tc cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_tc_ht_cleanup() which would have deleted all the tc ct rules, and so delete all the offloaded tuples. Fix this reversing the order of init and on cleanup, which will result in tc cleanup then ct cleanup. [ 9443.593347] WARNING: CPU: 2 PID: 206774 at drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c:1882 mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593349] Modules linked in: act_ct nf_flow_table rdma_ucm(O) rdma_cm(O) iw_cm(O) ib_ipoib(O) ib_cm(O) ib_umad(O) mlx5_core(O-) mlxfw(O) mlxdevm(O) auxiliary(O) ib_uverbs(O) psample ib_core(O) mlx_compat(O) ip_gre gre ip_tunnel act_vlan bonding geneve esp6_offload esp6 esp4_offload esp4 act_tunnel_key vxlan ip6_udp_tunnel udp_tunnel act_mirred act_skbedit act_gact cls_flower sch_ingress nfnetlink_cttimeout nfnetlink xfrm_user xfrm_algo 8021q garp stp ipmi_devintf mrp ipmi_msghandler llc openvswitch nsh nf_conncount nf_nat mst_pciconf(O) dm_multipath sbsa_gwdt uio_pdrv_genirq uio mlxbf_pmc mlxbf_pka mlx_trio mlx_bootctl(O) bluefield_edac sch_fq_codel ip_tables ipv6 crc_ccitt btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq raid1 raid0 crct10dif_ce i2c_mlxbf gpio_mlxbf2 mlxbf_gige aes_neon_bs aes_neon_blk [last unloaded: mlx5_ib] [ 9443.593419] CPU: 2 PID: 206774 Comm: modprobe Tainted: G O 5.4.0-1023.24.gc14613d-bluefield #1 [ 9443.593422] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:143ebaf Jan 11 2022 [ 9443.593424] pstate: 20000005 (nzCv daif -PAN -UAO) [ 9443.593489] pc : mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593545] lr : mlx5_ct_fs_smfs_destroy+0x24/0x30 [mlx5_core] [ 9443.593546] sp : ffff8000135dbab0 [ 9443.593548] x29: ffff8000135dbab0 x28: ffff0003a6ab8e80 [ 9443.593550] x27: 0000000000000000 x26: ffff0003e07d7000 [ 9443.593552] x25: ffff800009609de0 x24: ffff000397fb2120 [ 9443.593554] x23: ffff0003975c0000 x22: 0000000000000000 [ 9443.593556] x21: ffff0003975f08c0 x20: ffff800009609de0 [ 9443.593558] x19: ffff0003c8a13380 x18: 0000000000000014 [ 9443.593560] x17: 0000000067f5f125 x16: 000000006529c620 [ 9443.593561] x15: 000000000000000b x14: 0000000000000000 [ 9443.593563] x13: 0000000000000002 x12: 0000000000000001 [ 9443.593565] x11: ffff800011108868 x10: 0000000000000000 [ 9443.593567] x9 : 0000000000000000 x8 : ffff8000117fb270 [ 9443.593569] x7 : ffff0003ebc01288 x6 : 0000000000000000 [ 9443.593571] x5 : ffff800009591ab8 x4 : fffffe000f6d9a20 [ 9443.593572] x3 : 0000000080040001 x2 : fffffe000f6d9a20 [ 9443.593574] x1 : ffff8000095901d8 x0 : 0000000000000025 [ 9443.593577] Call trace: [ 9443.593634] mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593688] mlx5_ct_fs_smfs_destroy+0x24/0x30 [mlx5_core] [ 9443.593743] mlx5_tc_ct_clean+0x34/0xa8 [mlx5_core] [ 9443.593797] mlx5e_tc_esw_cleanup+0x58/0x88 [mlx5_core] [ 9443.593851] mlx5e_rep_tc_cleanup+0x24/0x30 [mlx5_core] [ 9443.593905] mlx5e_cleanup_rep_tx+0x6c/0x78 [mlx5_core] [ 9443.593959] mlx5e_detach_netdev+0x74/0x98 [mlx5_core] [ 9443.594013] mlx5e_netdev_change_profile+0x70/0x180 [mlx5_core] [ 9443.594067] mlx5e_netdev_attach_nic_profile+0x34/0x40 [mlx5_core] [ 9443.594122] mlx5e_vport_rep_unload+0x15c/0x1a8 [mlx5_core] [ 9443.594177] mlx5_eswitch_unregister_vport_reps+0x228/0x298 [mlx5_core] [ 9443.594231] mlx5e_rep_remove+0x2c/0x38 ---truncated--- | ||||
| CVE-2022-49341 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Clear prog->jited_len along prog->jited syzbot reported an illegal copy_to_user() attempt from bpf_prog_get_info_by_fd() [1] There was no repro yet on this bug, but I think that commit 0aef499f3172 ("mm/usercopy: Detect vmalloc overruns") is exposing a prior bug in bpf arm64. bpf_prog_get_info_by_fd() looks at prog->jited_len to determine if the JIT image can be copied out to user space. My theory is that syzbot managed to get a prog where prog->jited_len has been set to 43, while prog->bpf_func has ben cleared. It is not clear why copy_to_user(uinsns, NULL, ulen) is triggering this particular warning. I thought find_vma_area(NULL) would not find a vm_struct. As we do not hold vmap_area_lock spinlock, it might be possible that the found vm_struct was garbage. [1] usercopy: Kernel memory exposure attempt detected from vmalloc (offset 792633534417210172, size 43)! kernel BUG at mm/usercopy.c:101! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 25002 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-10139-g8291eaafed36 #0 Hardware name: linux,dummy-virt (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usercopy_abort+0x90/0x94 mm/usercopy.c:101 lr : usercopy_abort+0x90/0x94 mm/usercopy.c:89 sp : ffff80000b773a20 x29: ffff80000b773a30 x28: faff80000b745000 x27: ffff80000b773b48 x26: 0000000000000000 x25: 000000000000002b x24: 0000000000000000 x23: 00000000000000e0 x22: ffff80000b75db67 x21: 0000000000000001 x20: 000000000000002b x19: ffff80000b75db3c x18: 00000000fffffffd x17: 2820636f6c6c616d x16: 76206d6f72662064 x15: 6574636574656420 x14: 74706d6574746120 x13: 2129333420657a69 x12: 73202c3237313031 x11: 3237313434333533 x10: 3336323937207465 x9 : 657275736f707865 x8 : ffff80000a30c550 x7 : ffff80000b773830 x6 : ffff80000b773830 x5 : 0000000000000000 x4 : ffff00007fbbaa10 x3 : 0000000000000000 x2 : 0000000000000000 x1 : f7ff000028fc0000 x0 : 0000000000000064 Call trace: usercopy_abort+0x90/0x94 mm/usercopy.c:89 check_heap_object mm/usercopy.c:186 [inline] __check_object_size mm/usercopy.c:252 [inline] __check_object_size+0x198/0x36c mm/usercopy.c:214 check_object_size include/linux/thread_info.h:199 [inline] check_copy_size include/linux/thread_info.h:235 [inline] copy_to_user include/linux/uaccess.h:159 [inline] bpf_prog_get_info_by_fd.isra.0+0xf14/0xfdc kernel/bpf/syscall.c:3993 bpf_obj_get_info_by_fd+0x12c/0x510 kernel/bpf/syscall.c:4253 __sys_bpf+0x900/0x2150 kernel/bpf/syscall.c:4956 __do_sys_bpf kernel/bpf/syscall.c:5021 [inline] __se_sys_bpf kernel/bpf/syscall.c:5019 [inline] __arm64_sys_bpf+0x28/0x40 kernel/bpf/syscall.c:5019 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x48/0x114 arch/arm64/kernel/syscall.c:52 el0_svc_common.constprop.0+0x44/0xec arch/arm64/kernel/syscall.c:142 do_el0_svc+0xa0/0xc0 arch/arm64/kernel/syscall.c:206 el0_svc+0x44/0xb0 arch/arm64/kernel/entry-common.c:624 el0t_64_sync_handler+0x1ac/0x1b0 arch/arm64/kernel/entry-common.c:642 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:581 Code: aa0003e3 d00038c0 91248000 97fff65f (d4210000) | ||||
| CVE-2022-49348 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state The EXT4_FC_REPLAY bit in sbi->s_mount_state is used to indicate that we are in the middle of replay the fast commit journal. This was actually a mistake, since the sbi->s_mount_info is initialized from es->s_state. Arguably s_mount_state is misleadingly named, but the name is historical --- s_mount_state and s_state dates back to ext2. What should have been used is the ext4_{set,clear,test}_mount_flag() inline functions, which sets EXT4_MF_* bits in sbi->s_mount_flags. The problem with using EXT4_FC_REPLAY is that a maliciously corrupted superblock could result in EXT4_FC_REPLAY getting set in s_mount_state. This bypasses some sanity checks, and this can trigger a BUG() in ext4_es_cache_extent(). As a easy-to-backport-fix, filter out the EXT4_FC_REPLAY bit for now. We should eventually transition away from EXT4_FC_REPLAY to something like EXT4_MF_REPLAY. | ||||
| CVE-2022-49352 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix warning in ext4_handle_inode_extension We got issue as follows: EXT4-fs error (device loop0) in ext4_reserve_inode_write:5741: Out of memory EXT4-fs error (device loop0): ext4_setattr:5462: inode #13: comm syz-executor.0: mark_inode_dirty error EXT4-fs error (device loop0) in ext4_setattr:5519: Out of memory EXT4-fs error (device loop0): ext4_ind_map_blocks:595: inode #13: comm syz-executor.0: Can't allocate blocks for non-extent mapped inodes with bigalloc ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4361 at fs/ext4/file.c:301 ext4_file_write_iter+0x11c9/0x1220 Modules linked in: CPU: 1 PID: 4361 Comm: syz-executor.0 Not tainted 5.10.0+ #1 RIP: 0010:ext4_file_write_iter+0x11c9/0x1220 RSP: 0018:ffff924d80b27c00 EFLAGS: 00010282 RAX: ffffffff815a3379 RBX: 0000000000000000 RCX: 000000003b000000 RDX: ffff924d81601000 RSI: 00000000000009cc RDI: 00000000000009cd RBP: 000000000000000d R08: ffffffffbc5a2c6b R09: 0000902e0e52a96f R10: ffff902e2b7c1b40 R11: ffff902e2b7c1b40 R12: 000000000000000a R13: 0000000000000001 R14: ffff902e0e52aa10 R15: ffffffffffffff8b FS: 00007f81a7f65700(0000) GS:ffff902e3bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 000000012db88001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: do_iter_readv_writev+0x2e5/0x360 do_iter_write+0x112/0x4c0 do_pwritev+0x1e5/0x390 __x64_sys_pwritev2+0x7e/0xa0 do_syscall_64+0x37/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Above issue may happen as follows: Assume inode.i_size=4096 EXT4_I(inode)->i_disksize=4096 step 1: set inode->i_isize = 8192 ext4_setattr if (attr->ia_size != inode->i_size) EXT4_I(inode)->i_disksize = attr->ia_size; rc = ext4_mark_inode_dirty ext4_reserve_inode_write ext4_get_inode_loc __ext4_get_inode_loc sb_getblk --> return -ENOMEM ... if (!error) ->will not update i_size i_size_write(inode, attr->ia_size); Now: inode.i_size=4096 EXT4_I(inode)->i_disksize=8192 step 2: Direct write 4096 bytes ext4_file_write_iter ext4_dio_write_iter iomap_dio_rw ->return error if (extend) ext4_handle_inode_extension WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize); ->Then trigger warning. To solve above issue, if mark inode dirty failed in ext4_setattr just set 'EXT4_I(inode)->i_disksize' with old value. | ||||
| CVE-2022-49357 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: efi: Do not import certificates from UEFI Secure Boot for T2 Macs On Apple T2 Macs, when Linux attempts to read the db and dbx efi variables at early boot to load UEFI Secure Boot certificates, a page fault occurs in Apple firmware code and EFI runtime services are disabled with the following logs: [Firmware Bug]: Page fault caused by firmware at PA: 0xffffb1edc0068000 WARNING: CPU: 3 PID: 104 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x50/0xf0 (Removed some logs from here) Call Trace: <TASK> page_fault_oops+0x4f/0x2c0 ? search_bpf_extables+0x6b/0x80 ? search_module_extables+0x50/0x80 ? search_exception_tables+0x5b/0x60 kernelmode_fixup_or_oops+0x9e/0x110 __bad_area_nosemaphore+0x155/0x190 bad_area_nosemaphore+0x16/0x20 do_kern_addr_fault+0x8c/0xa0 exc_page_fault+0xd8/0x180 asm_exc_page_fault+0x1e/0x30 (Removed some logs from here) ? __efi_call+0x28/0x30 ? switch_mm+0x20/0x30 ? efi_call_rts+0x19a/0x8e0 ? process_one_work+0x222/0x3f0 ? worker_thread+0x4a/0x3d0 ? kthread+0x17a/0x1a0 ? process_one_work+0x3f0/0x3f0 ? set_kthread_struct+0x40/0x40 ? ret_from_fork+0x22/0x30 </TASK> ---[ end trace 1f82023595a5927f ]--- efi: Froze efi_rts_wq and disabled EFI Runtime Services integrity: Couldn't get size: 0x8000000000000015 integrity: MODSIGN: Couldn't get UEFI db list efi: EFI Runtime Services are disabled! integrity: Couldn't get size: 0x8000000000000015 integrity: Couldn't get UEFI dbx list integrity: Couldn't get size: 0x8000000000000015 integrity: Couldn't get mokx list integrity: Couldn't get size: 0x80000000 So we avoid reading these UEFI variables and thus prevent the crash. | ||||
| CVE-2022-49360 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on total_data_blocks As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215916 The kernel message is shown below: kernel BUG at fs/f2fs/segment.c:2560! Call Trace: allocate_segment_by_default+0x228/0x440 f2fs_allocate_data_block+0x13d1/0x31f0 do_write_page+0x18d/0x710 f2fs_outplace_write_data+0x151/0x250 f2fs_do_write_data_page+0xef9/0x1980 move_data_page+0x6af/0xbc0 do_garbage_collect+0x312f/0x46f0 f2fs_gc+0x6b0/0x3bc0 f2fs_balance_fs+0x921/0x2260 f2fs_write_single_data_page+0x16be/0x2370 f2fs_write_cache_pages+0x428/0xd00 f2fs_write_data_pages+0x96e/0xd50 do_writepages+0x168/0x550 __writeback_single_inode+0x9f/0x870 writeback_sb_inodes+0x47d/0xb20 __writeback_inodes_wb+0xb2/0x200 wb_writeback+0x4bd/0x660 wb_workfn+0x5f3/0xab0 process_one_work+0x79f/0x13e0 worker_thread+0x89/0xf60 kthread+0x26a/0x300 ret_from_fork+0x22/0x30 RIP: 0010:new_curseg+0xe8d/0x15f0 The root cause is: ckpt.valid_block_count is inconsistent with SIT table, stat info indicates filesystem has free blocks, but SIT table indicates filesystem has no free segment. So that during garbage colloection, it triggers panic when LFS allocator fails to find free segment. This patch tries to fix this issue by checking consistency in between ckpt.valid_block_count and block accounted from SIT. | ||||
| CVE-2022-49361 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check for inline inode Yanming reported a kernel bug in Bugzilla kernel [1], which can be reproduced. The bug message is: The kernel message is shown below: kernel BUG at fs/inode.c:611! Call Trace: evict+0x282/0x4e0 __dentry_kill+0x2b2/0x4d0 dput+0x2dd/0x720 do_renameat2+0x596/0x970 __x64_sys_rename+0x78/0x90 do_syscall_64+0x3b/0x90 [1] https://bugzilla.kernel.org/show_bug.cgi?id=215895 The bug is due to fuzzed inode has both inline_data and encrypted flags. During f2fs_evict_inode(), as the inode was deleted by rename(), it will cause inline data conversion due to conflicting flags. The page cache will be polluted and the panic will be triggered in clear_inode(). Try fixing the bug by doing more sanity checks for inline data inode in sanity_check_inode(). | ||||