Export limit exceeded: 43548 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (43548 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-22790 | 2 Everest, Linuxfoundation | 2 Everest-core, Everest | 2026-03-31 | 8.8 High |
| EVerest is an EV charging software stack. Prior to version 2026.02.0, `HomeplugMessage::setup_payload` trusts `len` after an `assert`; in release builds the check is removed, so oversized SLAC payloads are `memcpy`'d into a ~1497-byte stack buffer, corrupting the stack and enabling remote code execution from network-provided frames. Version 2026.02.0 contains a patch. | ||||
| CVE-2026-23995 | 2 Everest, Linuxfoundation | 2 Everest-core, Everest | 2026-03-31 | 8.4 High |
| EVerest is an EV charging software stack. Prior to version 2026.02.0, stack-based buffer overflow in CAN interface initialization: passing an interface name longer than IFNAMSIZ (16) to CAN open routines overflows `ifreq.ifr_name`, corrupting adjacent stack data and enabling potential code execution. A malicious or misconfigured interface name can trigger this before any privilege checks. Version 2026.02.0 contains a patch. | ||||
| CVE-2026-26008 | 2 Everest, Linuxfoundation | 2 Everest-core, Everest | 2026-03-31 | 7.5 High |
| EVerest is an EV charging software stack. Versions prior to 2026.02.0 have an out-of-bounds access (std::vector) that leads to possible remote crash/memory corruption. This is because the CSMS sends UpdateAllowedEnergyTransferModes over the network. Version 2026.2.0 contains a patch. | ||||
| CVE-2026-26073 | 2 Everest, Linuxfoundation | 2 Everest-core, Everest | 2026-03-31 | 5.9 Medium |
| EVerest is an EV charging software stack. Versions prior to 2026.02.0 have a data race leading to possible `std::queue`/`std::deque` corruption. The trigger is powermeter public key update and EV session/error events (while OCPP not started). This results in a TSAN data race report and an ASAN/UBSAN misaligned address runtime error being observed. Version 2026.02.0 contains a patch. | ||||
| CVE-2026-3108 | 1 Mattermost | 2 Mattermost, Mattermost Server | 2026-03-31 | 8 High |
| Mattermost versions 11.2.x <= 11.2.2, 10.11.x <= 10.11.10, 11.4.x <= 11.4.0, 11.3.x <= 11.3.1 fail to sanitize user-controlled post content in the mmctl commands terminal output which allows attackers to manipulate administrator terminals via crafted messages containing ANSI and OSC escape sequences that enable screen manipulation, fake prompts, and clipboard hijacking.. Mattermost Advisory ID: MMSA-2026-00599 | ||||
| CVE-2026-4902 | 1 Tenda | 2 Ac5, Ac5 Firmware | 2026-03-31 | 8.8 High |
| A vulnerability was detected in Tenda AC5 15.03.06.47. This affects the function fromAddressNat of the file /goform/addressNat of the component POST Request Handler. The manipulation of the argument page results in stack-based buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. | ||||
| CVE-2026-33743 | 2 Linuxcontainers, Lxc | 2 Incus, Incus | 2026-03-31 | 6.5 Medium |
| Incus is a system container and virtual machine manager. Prior to version 6.23.0, a specially crafted storage bucket backup can be used by an user with access to Incus' storage bucket feature to crash the Incus daemon. Repeated use of this attack can be used to keep the server offline causing a denial of service of the control plane API. This does not impact any running workload, existing containers and virtual machines will keep operating. Version 6.23.0 fixes the issue. | ||||
| CVE-2026-32984 | 1 Wazuh | 1 Wazuh | 2026-03-31 | 3.5 Low |
| Wazuh authd contains a heap-buffer overflow vulnerability that allows attackers to cause memory corruption and malformed heap data by sending specially crafted input. Attackers can exploit this vulnerability to trigger a denial of service condition, resulting in low availability impact to the authentication daemon. | ||||
| CVE-2023-7340 | 1 Wazuh | 1 Wazuh | 2026-03-31 | 3.1 Low |
| Wazuh authd contains a heap-buffer overflow vulnerability that allows attackers to cause memory corruption and malformed heap data by sending specially crafted input. Attackers can exploit this vulnerability to trigger a denial of service condition, resulting in low availability impact to the authentication daemon. | ||||
| CVE-2026-4961 | 1 Tenda | 2 Ac6, Ac6 Firmware | 2026-03-31 | 8.8 High |
| A vulnerability was identified in Tenda AC6 15.03.05.16. Affected by this vulnerability is the function formQuickIndex of the file /goform/QuickIndex of the component POST Request Handler. The manipulation of the argument PPPOEPassword leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. | ||||
| CVE-2026-33916 | 1 Handlebarsjs | 1 Handlebars | 2026-03-31 | 4.7 Medium |
| Handlebars provides the power necessary to let users build semantic templates. In versions 4.0.0 through 4.7.8, `resolvePartial()` in the Handlebars runtime resolves partial names via a plain property lookup on `options.partials` without guarding against prototype-chain traversal. When `Object.prototype` has been polluted with a string value whose key matches a partial reference in a template, the polluted string is used as the partial body and rendered without HTML escaping, resulting in reflected or stored XSS. Version 4.7.9 fixes the issue. Some workarounds are available. Apply `Object.freeze(Object.prototype)` early in application startup to prevent prototype pollution. Note: this may break other libraries, and/or use the Handlebars runtime-only build (`handlebars/runtime`), which does not compile templates and reduces the attack surface. | ||||
| CVE-2026-5024 | 2 D-link, Dlink | 3 Dir-513, Dir-513, Dir-513 Firmware | 2026-03-31 | 8.8 High |
| A vulnerability was found in D-Link DIR-513 1.10. This issue affects the function formSetEmail of the file /goform/formSetEmail. Performing a manipulation of the argument curTime results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-5043 | 1 Belkin | 2 F9k1122, F9k1122 Firmware | 2026-03-31 | 8.8 High |
| A weakness has been identified in Belkin F9K1122 1.00.33. The impacted element is the function formSetPassword of the file /goform/formSetPassword of the component Parameter Handler. This manipulation of the argument webpage causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-53521 | 1 F5 | 2 Big-ip, Big-ip Access Policy Manager | 2026-03-31 | 9.8 Critical |
| When a BIG-IP APM access policy is configured on a virtual server, specific malicious traffic can lead to Remote Code Execution (RCE). Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2026-32845 | 1 Jkuhlmann | 1 Cgltf | 2026-03-31 | 8.4 High |
| cgltf version 1.15 and prior contain an integer overflow vulnerability in the cgltf_validate() function when validating sparse accessors that allows attackers to trigger out-of-bounds reads by supplying crafted glTF/GLB input files with attacker-controlled size values. Attackers can exploit unchecked arithmetic operations in sparse accessor validation to cause heap buffer over-reads in cgltf_calc_index_bound(), resulting in denial of service crashes and potential memory disclosure. | ||||
| CVE-2026-4974 | 1 Tenda | 2 Ac7, Ac7 Firmware | 2026-03-31 | 8.8 High |
| A flaw has been found in Tenda AC7 15.03.06.44. Affected by this issue is the function fromSetSysTime of the file /goform/SetSysTimeCfg of the component POST Request Handler. Executing a manipulation of the argument Time can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been published and may be used. | ||||
| CVE-2026-32811 | 1 Dadrus | 1 Heimdall | 2026-03-30 | 8.2 High |
| Heimdall is a cloud native Identity Aware Proxy and Access Control Decision service. When using Heimdall in envoy gRPC decision API mode with versions 0.7.0-alpha through 0.17.10, wrong encoding of the query URL string allows rules with non-wildcard path expressions to be bypassed. Envoy splits the requested URL into parts, and sends the parts individually to Heimdall. Although query and path are present in the API, the query field is documented to be always empty and the URL query is included in the path field. The implementation uses go's url library to reconstruct the url which automatically encodes special characters in the path. As a consequence, a parameter like /mypath?foo=bar to Path is escaped into /mypath%3Ffoo=bar. Subsequently, a rule matching /mypath no longer matches and is bypassed. The issue can only lead to unintended access if Heimdall is configured with an "allow all" default rule. Since v0.16.0, Heimdall enforces secure defaults and refuses to start with such a configuration unless this enforcement is explicitly disabled, e.g. via --insecure-skip-secure-default-rule-enforcement or the broader --insecure flag. This issue has been fixed in version 0.17.11. | ||||
| CVE-2026-33306 | 2 Bcrypt-ruby, Bcrypt-ruby Project | 2 Bcrypt-ruby, Bcrypt-ruby | 2026-03-30 | 7.5 High |
| bcrypt-ruby is a Ruby binding for the OpenBSD bcrypt() password hashing algorithm. Prior to version 3.1.22, an integer overflow in the Java BCrypt implementation for JRuby can cause zero iterations in the strengthening loop. Impacted applications must be setting the cost to 31 to see this happen. The JRuby implementation of bcrypt-ruby (`BCrypt.java`) computes the key-strengthening round count as a signed 32-bit integer. When `cost=31` (the maximum allowed by the gem), signed integer overflow causes the round count to become negative, and the strengthening loop executes **zero iterations**. This collapses bcrypt from 2^31 rounds of exponential key-strengthening to effectively constant-time computation — only the initial EksBlowfish key setup and final 64x encryption phase remain. The resulting hash looks valid (`$2a$31$...`) and verifies correctly via `checkpw`, making the weakness invisible to the application. This issue is triggered only when cost=31 is used or when verifying a `$2a$31$` hash. This problem has been fixed in version 3.1.22. As a workaround, set the cost to something less than 31. | ||||
| CVE-2026-27784 | 1 F5 | 1 Nginx Open Source | 2026-03-30 | 7.8 High |
| The 32-bit implementation of NGINX Open Source has a vulnerability in the ngx_http_mp4_module module, which might allow an attacker to over-read or over-write NGINX worker memory resulting in its termination, using a specially crafted MP4 file. The issue only affects 32-bit NGINX Open Source if it is built with the ngx_http_mp4_module module and the mp4 directive is used in the configuration file. Additionally, the attack is possible only if an attacker can trigger the processing of a specially crafted MP4 file with the ngx_http_mp4_module module. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2025-14917 | 4 Apple, Ibm, Linux and 1 more | 8 Macos, Aix, I and 5 more | 2026-03-30 | 6.7 Medium |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.3 IBM WebSphere Application Server Liberty could provide weaker than expected security when administering security settings. | ||||