Export limit exceeded: 20862 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20862 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40174 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix SMP ordering in switch_mm_irqs_off() Stephen noted that it is possible to not have an smp_mb() between the loaded_mm store and the tlb_gen load in switch_mm(), meaning the ordering against flush_tlb_mm_range() goes out the window, and it becomes possible for switch_mm() to not observe a recent tlb_gen update and fail to flush the TLBs. [ dhansen: merge conflict fixed by Ingo ] | ||||
| CVE-2025-40175 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: cleanup remaining SKBs in PTP flows When the driver requests Tx timestamp value, one of the first steps is to clone SKB using skb_get. It increases the reference counter for that SKB to prevent unexpected freeing by another component. However, there may be a case where the index is requested, SKB is assigned and never consumed by PTP flows - for example due to reset during running PTP apps. Add a check in release timestamping function to verify if the SKB assigned to Tx timestamp latch was freed, and release remaining SKBs. | ||||
| CVE-2025-40177 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Fix bootlog initialization ordering As soon as we queue MHI buffers to receive the bootlog from the device, we could be receiving data. Therefore all the resources needed to process that data need to be setup prior to queuing the buffers. We currently initialize some of the resources after queuing the buffers which creates a race between the probe() and any data that comes back from the device. If the uninitialized resources are accessed, we could see page faults. Fix the init ordering to close the race. | ||||
| CVE-2025-40178 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pid: Add a judgment for ns null in pid_nr_ns __task_pid_nr_ns ns = task_active_pid_ns(current); pid_nr_ns(rcu_dereference(*task_pid_ptr(task, type)), ns); if (pid && ns->level <= pid->level) { Sometimes null is returned for task_active_pid_ns. Then it will trigger kernel panic in pid_nr_ns. For example: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 39-bit VAs, pgdp=00000002175aa000 [0000000000000058] pgd=08000002175ab003, p4d=08000002175ab003, pud=08000002175ab003, pmd=08000002175be003, pte=0000000000000000 pstate: 834000c5 (Nzcv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : __task_pid_nr_ns+0x74/0xd0 lr : __task_pid_nr_ns+0x24/0xd0 sp : ffffffc08001bd10 x29: ffffffc08001bd10 x28: ffffffd4422b2000 x27: 0000000000000001 x26: ffffffd442821168 x25: ffffffd442821000 x24: 00000f89492eab31 x23: 00000000000000c0 x22: ffffff806f5693c0 x21: ffffff806f5693c0 x20: 0000000000000001 x19: 0000000000000000 x18: 0000000000000000 x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 00000000023a1adc x14: 0000000000000003 x13: 00000000007ef6d8 x12: 001167c391c78800 x11: 00ffffffffffffff x10: 0000000000000000 x9 : 0000000000000001 x8 : ffffff80816fa3c0 x7 : 0000000000000000 x6 : 49534d702d535449 x5 : ffffffc080c4c2c0 x4 : ffffffd43ee128c8 x3 : ffffffd43ee124dc x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffffff806f5693c0 Call trace: __task_pid_nr_ns+0x74/0xd0 ... __handle_irq_event_percpu+0xd4/0x284 handle_irq_event+0x48/0xb0 handle_fasteoi_irq+0x160/0x2d8 generic_handle_domain_irq+0x44/0x60 gic_handle_irq+0x4c/0x114 call_on_irq_stack+0x3c/0x74 do_interrupt_handler+0x4c/0x84 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c account_kernel_stack+0x60/0x144 exit_task_stack_account+0x1c/0x80 do_exit+0x7e4/0xaf8 ... get_signal+0x7bc/0x8d8 do_notify_resume+0x128/0x828 el0_svc+0x6c/0x70 el0t_64_sync_handler+0x68/0xbc el0t_64_sync+0x1a8/0x1ac Code: 35fffe54 911a02a8 f9400108 b4000128 (b9405a69) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt | ||||
| CVE-2025-40180 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: zynqmp-ipi: Fix out-of-bounds access in mailbox cleanup loop The cleanup loop was starting at the wrong array index, causing out-of-bounds access. Start the loop at the correct index for zero-indexed arrays to prevent accessing memory beyond the allocated array bounds. | ||||
| CVE-2025-40181 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNP When running as an SNP or TDX guest under KVM, force the legacy PCI hole, i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC via a forced variable MTRR range. In most KVM-based setups, legacy devices such as the HPET and TPM are enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and optionally a SystemMemory descriptor for an OperationRegion, e.g. if the device needs to be accessed via a Control Method. If a SystemMemory entry is present, then the kernel's ACPI driver will auto-ioremap the region so that it can be accessed at will. However, the ACPI spec doesn't provide a way to enumerate the memory type of SystemMemory regions, i.e. there's no way to tell software that a region must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86. The dedicated device drivers however, e.g. the HPET driver and TPM driver, want to map their associated memory as UC or WC, as accessing PCI devices using WB is unsupported. On bare metal and non-CoCO, the conflicting requirements "work" as firmware configures the PCI hole (and other device memory) to be UC in the MTRRs. So even though the ACPI mappings request WB, they are forced to UC- in the kernel's tracking due to the kernel properly handling the MTRR overrides, and thus are compatible with the drivers' requested WC/UC-. With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their requested WB if the ACPI mappings are established before the dedicated driver code attempts to initialize the device. E.g. if acpi_init() runs before the corresponding device driver is probed, ACPI's WB mapping will "win", and result in the driver's ioremap() failing because the existing WB mapping isn't compatible with the requested WC/UC-. E.g. when a TPM is emulated by the hypervisor (ignoring the security implications of relying on what is allegedly an untrusted entity to store measurements), the TPM driver will request UC and fail: [ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0 [ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12 Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC). E.g. tracing mapping requests for TPM TIS yields: Mapping TPM TIS with req_type = 0 WARNING: CPU: 22 PID: 1 at arch/x86/mm/pat/memtype.c:530 memtype_reserve+0x2ab/0x460 Modules linked in: CPU: 22 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc7+ #2 VOLUNTARY Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/29/2025 RIP: 0010:memtype_reserve+0x2ab/0x460 __ioremap_caller+0x16d/0x3d0 ioremap_cache+0x17/0x30 x86_acpi_os_ioremap+0xe/0x20 acpi_os_map_iomem+0x1f3/0x240 acpi_os_map_memory+0xe/0x20 acpi_ex_system_memory_space_handler+0x273/0x440 acpi_ev_address_space_dispatch+0x176/0x4c0 acpi_ex_access_region+0x2ad/0x530 acpi_ex_field_datum_io+0xa2/0x4f0 acpi_ex_extract_from_field+0x296/0x3e0 acpi_ex_read_data_from_field+0xd1/0x460 acpi_ex_resolve_node_to_value+0x2ee/0x530 acpi_ex_resolve_to_value+0x1f2/0x540 acpi_ds_evaluate_name_path+0x11b/0x190 acpi_ds_exec_end_op+0x456/0x960 acpi_ps_parse_loop+0x27a/0xa50 acpi_ps_parse_aml+0x226/0x600 acpi_ps_execute_method+0x172/0x3e0 acpi_ns_evaluate+0x175/0x5f0 acpi_evaluate_object+0x213/0x490 acpi_evaluate_integer+0x6d/0x140 acpi_bus_get_status+0x93/0x150 acpi_add_single_object+0x43a/0x7c0 acpi_bus_check_add+0x149/0x3a0 acpi_bus_check_add_1+0x16/0x30 acpi_ns_walk_namespace+0x22c/0x360 acpi_walk_namespace+0x15c/0x170 acpi_bus_scan+0x1dd/0x200 acpi_scan_init+0xe5/0x2b0 acpi_init+0x264/0x5b0 do_one_i ---truncated--- | ||||
| CVE-2025-40182 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: skcipher - Fix reqsize handling Commit afddce13ce81d ("crypto: api - Add reqsize to crypto_alg") introduced cra_reqsize field in crypto_alg struct to replace type specific reqsize fields. It looks like this was introduced specifically for ahash and acomp from the commit description as subsequent commits add necessary changes in these alg frameworks. However, this is being recommended for use in all crypto algs [1] instead of setting reqsize using crypto_*_set_reqsize(). Using cra_reqsize in skcipher algorithms, hence, causes memory corruptions and crashes as the underlying functions in the algorithm framework have not been updated to set the reqsize properly from cra_reqsize. [2] Add proper set_reqsize calls in the skcipher init function to properly initialize reqsize for these algorithms in the framework. [1]: https://lore.kernel.org/linux-crypto/aCL8BxpHr5OpT04k@gondor.apana.org.au/ [2]: https://gist.github.com/Pratham-T/24247446f1faf4b7843e4014d5089f6b | ||||
| CVE-2025-40183 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6} Cilium has a BPF egress gateway feature which forces outgoing K8s Pod traffic to pass through dedicated egress gateways which then SNAT the traffic in order to interact with stable IPs outside the cluster. The traffic is directed to the gateway via vxlan tunnel in collect md mode. A recent BPF change utilized the bpf_redirect_neigh() helper to forward packets after the arrival and decap on vxlan, which turned out over time that the kmalloc-256 slab usage in kernel was ever-increasing. The issue was that vxlan allocates the metadata_dst object and attaches it through a fake dst entry to the skb. The latter was never released though given bpf_redirect_neigh() was merely setting the new dst entry via skb_dst_set() without dropping an existing one first. | ||||
| CVE-2025-40189 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: Fix lost EEPROM read timeout error(-ETIMEDOUT) in lan78xx_read_raw_eeprom Syzbot reported read of uninitialized variable BUG with following call stack. lan78xx 8-1:1.0 (unnamed net_device) (uninitialized): EEPROM read operation timeout ===================================================== BUG: KMSAN: uninit-value in lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline] BUG: KMSAN: uninit-value in lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] BUG: KMSAN: uninit-value in lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline] lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766 lan78xx_probe+0x225c/0x3310 drivers/net/usb/lan78xx.c:4707 Local variable sig.i.i created at: lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1092 [inline] lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] lan78xx_reset+0x77e/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766 The function lan78xx_read_raw_eeprom failed to properly propagate EEPROM read timeout errors (-ETIMEDOUT). In the fallthrough path, it first attempted to restore the pin configuration for LED outputs and then returned only the status of that restore operation, discarding the original timeout error. As a result, callers could mistakenly treat the data buffer as valid even though the EEPROM read had actually timed out with no data or partial data. To fix this, handle errors in restoring the LED pin configuration separately. If the restore succeeds, return any prior EEPROM timeout error correctly to the caller. | ||||
| CVE-2025-40192 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "ipmi: fix msg stack when IPMI is disconnected" This reverts commit c608966f3f9c2dca596967501d00753282b395fc. This patch has a subtle bug that can cause the IPMI driver to go into an infinite loop if the BMC misbehaves in a certain way. Apparently certain BMCs do misbehave this way because several reports have come in recently about this. | ||||
| CVE-2025-40199 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: page_pool: Fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches Helge reported that the introduction of PP_MAGIC_MASK let to crashes on boot on his 32-bit parisc machine. The cause of this is the mask is set too wide, so the page_pool_page_is_pp() incurs false positives which crashes the machine. Just disabling the check in page_pool_is_pp() will lead to the page_pool code itself malfunctioning; so instead of doing this, this patch changes the define for PP_DMA_INDEX_BITS to avoid mistaking arbitrary kernel pointers for page_pool-tagged pages. The fix relies on the kernel pointers that alias with the pp_magic field always being above PAGE_OFFSET. With this assumption, we can use the lowest bit of the value of PAGE_OFFSET as the upper bound of the PP_DMA_INDEX_MASK, which should avoid the false positives. Because we cannot rely on PAGE_OFFSET always being a compile-time constant, nor on it always being >0, we fall back to disabling the dma_index storage when there are not enough bits available. This leaves us in the situation we were in before the patch in the Fixes tag, but only on a subset of architecture configurations. This seems to be the best we can do until the transition to page types in complete for page_pool pages. v2: - Make sure there's at least 8 bits available and that the PAGE_OFFSET bit calculation doesn't wrap | ||||
| CVE-2025-40200 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: reject negative file sizes in squashfs_read_inode() Syskaller reports a "WARNING in ovl_copy_up_file" in overlayfs. This warning is ultimately caused because the underlying Squashfs file system returns a file with a negative file size. This commit checks for a negative file size and returns EINVAL. [phillip@squashfs.org.uk: only need to check 64 bit quantity] | ||||
| CVE-2025-40201 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths The usage of task_lock(tsk->group_leader) in sys_prlimit64()->do_prlimit() path is very broken. sys_prlimit64() does get_task_struct(tsk) but this only protects task_struct itself. If tsk != current and tsk is not a leader, this process can exit/exec and task_lock(tsk->group_leader) may use the already freed task_struct. Another problem is that sys_prlimit64() can race with mt-exec which changes ->group_leader. In this case do_prlimit() may take the wrong lock, or (worse) ->group_leader may change between task_lock() and task_unlock(). Change sys_prlimit64() to take tasklist_lock when necessary. This is not nice, but I don't see a better fix for -stable. | ||||
| CVE-2025-40202 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: Rework user message limit handling The limit on the number of user messages had a number of issues, improper counting in some cases and a use after free. Restructure how this is all done to handle more in the receive message allocation routine, so all refcouting and user message limit counts are done in that routine. It's a lot cleaner and safer. | ||||
| CVE-2025-40206 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_objref: validate objref and objrefmap expressions Referencing a synproxy stateful object from OUTPUT hook causes kernel crash due to infinite recursive calls: BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12) [...] Call Trace: __find_rr_leaf+0x99/0x230 fib6_table_lookup+0x13b/0x2d0 ip6_pol_route+0xa4/0x400 fib6_rule_lookup+0x156/0x240 ip6_route_output_flags+0xc6/0x150 __nf_ip6_route+0x23/0x50 synproxy_send_tcp_ipv6+0x106/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 nft_synproxy_do_eval+0x263/0x310 nft_do_chain+0x5a8/0x5f0 [nf_tables nft_do_chain_inet+0x98/0x110 nf_hook_slow+0x43/0xc0 __ip6_local_out+0xf0/0x170 ip6_local_out+0x17/0x70 synproxy_send_tcp_ipv6+0x1a2/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 [...] Implement objref and objrefmap expression validate functions. Currently, only NFT_OBJECT_SYNPROXY object type requires validation. This will also handle a jump to a chain using a synproxy object from the OUTPUT hook. Now when trying to reference a synproxy object in the OUTPUT hook, nft will produce the following error: synproxy_crash.nft: Error: Could not process rule: Operation not supported synproxy name mysynproxy ^^^^^^^^^^^^^^^^^^^^^^^^ | ||||
| CVE-2025-68804 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_ishtp: Fix UAF after unbinding driver After unbinding the driver, another kthread `cros_ec_console_log_work` is still accessing the device, resulting an UAF and crash. The driver doesn't unregister the EC device in .remove() which should shutdown sub-devices synchronously. Fix it. | ||||
| CVE-2025-68805 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: fix io-uring list corruption for terminated non-committed requests When a request is terminated before it has been committed, the request is not removed from the queue's list. This leaves a dangling list entry that leads to list corruption and use-after-free issues. Remove the request from the queue's list for terminated non-committed requests. | ||||
| CVE-2022-50849 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP An oops can be induced by running 'cat /proc/kcore > /dev/null' on devices using pstore with the ram backend because kmap_atomic() assumes lowmem pages are accessible with __va(). Unable to handle kernel paging request at virtual address ffffff807ff2b000 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081d87000 [ffffff807ff2b000] pgd=180000017fe18003, p4d=180000017fe18003, pud=180000017fe18003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: dm_integrity CPU: 7 PID: 21179 Comm: perf Not tainted 5.15.67-10882-ge4eb2eb988cd #1 baa443fb8e8477896a370b31a821eb2009f9bfba Hardware name: Google Lazor (rev3 - 8) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x110/0x260 lr : vread+0x194/0x294 sp : ffffffc013ee39d0 x29: ffffffc013ee39f0 x28: 0000000000001000 x27: ffffff807ff2b000 x26: 0000000000001000 x25: ffffffc0085a2000 x24: ffffff802d4b3000 x23: ffffff80f8a60000 x22: ffffff802d4b3000 x21: ffffffc0085a2000 x20: ffffff8080b7bc68 x19: 0000000000001000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffd3073f2e60 x14: ffffffffad588000 x13: 0000000000000000 x12: 0000000000000001 x11: 00000000000001a2 x10: 00680000fff2bf0b x9 : 03fffffff807ff2b x8 : 0000000000000001 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffffff802d4b4000 x4 : ffffff807ff2c000 x3 : ffffffc013ee3a78 x2 : 0000000000001000 x1 : ffffff807ff2b000 x0 : ffffff802d4b3000 Call trace: __memcpy+0x110/0x260 read_kcore+0x584/0x778 proc_reg_read+0xb4/0xe4 During early boot, memblock reserves the pages for the ramoops reserved memory node in DT that would otherwise be part of the direct lowmem mapping. Pstore's ram backend reuses those reserved pages to change the memory type (writeback or non-cached) by passing the pages to vmap() (see pfn_to_page() usage in persistent_ram_vmap() for more details) with specific flags. When read_kcore() starts iterating over the vmalloc region, it runs over the virtual address that vmap() returned for ramoops. In aligned_vread() the virtual address is passed to vmalloc_to_page() which returns the page struct for the reserved lowmem area. That lowmem page is passed to kmap_atomic(), which effectively calls page_to_virt() that assumes a lowmem page struct must be directly accessible with __va() and friends. These pages are mapped via vmap() though, and the lowmem mapping was never made, so accessing them via the lowmem virtual address oopses like above. Let's side-step this problem by passing VM_IOREMAP to vmap(). This will tell vread() to not include the ramoops region in the kcore. Instead the area will look like a bunch of zeros. The alternative is to teach kmap() about vmalloc areas that intersect with lowmem. Presumably such a change isn't a one-liner, and there isn't much interest in inspecting the ramoops region in kcore files anyway, so the most expedient route is taken for now. | ||||
| CVE-2022-50853 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix a credential leak in _nfs4_discover_trunking() | ||||
| CVE-2025-39999 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix blk_mq_tags double free while nr_requests grown In the case user trigger tags grow by queue sysfs attribute nr_requests, hctx->sched_tags will be freed directly and replaced with a new allocated tags, see blk_mq_tag_update_depth(). The problem is that hctx->sched_tags is from elevator->et->tags, while et->tags is still the freed tags, hence later elevator exit will try to free the tags again, causing kernel panic. Fix this problem by replacing et->tags with new allocated tags as well. Noted there are still some long term problems that will require some refactor to be fixed thoroughly[1]. [1] https://lore.kernel.org/all/20250815080216.410665-1-yukuai1@huaweicloud.com/ | ||||