Export limit exceeded: 378777 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378777 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64243 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: simple-mux: Fix enum control bounds check simple_mux_control_put() rejects values greater than e->items, but enum control values are zero based. For the two-entry mux used by this driver, valid values are 0 and 1, so value 2 must be rejected as well. Accepting e->items can store an invalid mux state, pass it to the GPIO setter, and pass it on to the DAPM mux update path where it is used as an index into the enum text array. Use the same >= e->items check used by the ASoC enum helpers. | ||||
| CVE-2026-65795 | 1 Microsoft | 21 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 18 more | 2026-08-17 | 6.7 Medium |
| No cwe for this issue in Windows DNS allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-68472 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate EHT MLE before MLD ID read cfg80211_gen_new_ie() copies ML probe response elements from the parent frame when the parent EHT multi-link element has an MLD ID matching the nontransmitted BSSID index. The code only checked that the extension element had more than one byte before calling ieee80211_mle_get_mld_id(). That helper assumes a BASIC MLE with enough common info and documents that callers must first use ieee80211_mle_type_ok(). Attack chain: malicious AP sends a short EHT MLE in an MBSSID beacon. cfg80211_inform_bss_frame_data() stores the copied IE buffer. cfg80211_parse_mbssid_data() builds the nontransmitted BSS IE. cfg80211_gen_new_ie() sees the EHT MLE in the parent frame. ieee80211_mle_get_mld_id() then reads past the IE boundary. Validate the MLE type and size before reading the MLD ID. This matches the contract required by the MLE helper and rejects the short element before any internal MLE fields are accessed. | ||||
| CVE-2026-68474 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access() spufs_mem_mmap_access() computes the local store offset as address - vma->vm_start, but bounds-checks it against vma->vm_end instead of the local store size. On 64-bit, offset is always well below vma->vm_end, so the clamp never fires and len stays unbounded against the LS_SIZE buffer returned by ctx->ops->get_ls(). Reject offsets at or beyond LS_SIZE and clamp len to the remaining space, mirroring the guard already used by spufs_mem_mmap_fault() and spufs_ps_fault(). | ||||
| CVE-2026-72083 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT parameter list with transport_kmap_data_sg() and parses the destination TransportID with target_parse_pr_out_transport_id(). For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns the ISID in iport_ptr as a raw pointer into that mapped buffer. The function then unmaps the buffer with transport_kunmap_data_sg() before dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and core_scsi3_alloc_registration(). When the parameter list spans more than one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual address backing iport_ptr is torn down and every subsequent dereference is a use-after-free read of the unmapped region. Keep the parameter list mapped until iport_ptr is no longer needed: drop the early transport_kunmap_data_sg() and unmap once on the success path, right before returning. The error paths already unmap through the existing "if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs on every post-map error exit because buf is no longer cleared early. Only reads of the mapping happen while spinlocks are held; the map and unmap calls remain outside any lock. The sibling caller core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it and is left unchanged. | ||||
| CVE-2026-72089 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Reject firmware log with size smaller than header fw_log_from_bo() validates the tracing buffer header_size and that the log fits within the BO, but never checks that log->size is at least log->header_size. fw_log_print_buffer() then computes: u32 data_size = log->size - log->header_size; which underflows to a near-U32_MAX value when firmware reports a log whose size is smaller than its header. That huge data_size defeats the log_start/log_end bounds clamps added by commit dd1311bcf0e6 ("accel/ivpu: Add bounds checks for firmware log indices"), so fw_log_print_lines() reads far past the small real data region of the BO. A size of 0 also makes fw_log_from_bo() advance the offset by 0, causing the callers to loop forever on the same header. Reject logs whose size is smaller than the header (which also rejects size == 0). | ||||
| CVE-2026-72095 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-fence: Make dma_fence_dedup_array() robust against 0-count input dma_fence_dedup_array() returns 1 when called with num_fences == 0: the for-loop body never executes, j stays at 0, and the final `return ++j` yields 1. This contradicts both the kernel-doc ("Return: Number of unique fences remaining in the array") and the natural expectation that 0 input gives 0 output. The caller __dma_fence_unwrap_merge() bails out via the `if (count == 0 || count == 1)` fast path and so is save. But amdgpu_userq_wait_*() could reach the dedup call with a zero local count and dereference an uninitialized fence slot in the array. Make the contract match the documentation by returning 0 early. This also skips an unnecessary sort() call on an empty array. | ||||
| CVE-2026-72107 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm era: fix out-of-bounds memory access for non-zero start sector dm-era tracks writes in target-relative blocks, but era_map() calculates the writeset block before applying the target offset. Tables with a non-zero start sector can therefore pass an absolute mapped-device block to metadata_current_marked(). If the absolute block is beyond the current writeset size, writeset_marked() tests past the end of the in-core bitset. KASAN reports this as a vmalloc-out-of-bounds access. Apply the target offset before calculating the era block so writeset lookups use the target-relative block number. | ||||
| CVE-2026-19714 | 2 Simple Jwt Login Project, Wordpress | 2 Simple Jwt Login, Wordpress | 2026-08-17 | 9.1 Critical |
| The Simple JWT Login WordPress plugin before 3.6.8 does not validate the audience of the Google identity tokens it accepts, allowing unauthenticated users to authenticate as any user whose email address such a token carries, up to and including an administrator. Every site with the Simple JWT Login WordPress plugin before 3.6.8's Google sign-in enabled is affected. | ||||
| CVE-2026-19725 | 2 Wordpress, Wpvividplugins | 2 Wordpress, Wpvivid — Backup, Migration & Staging | 2026-08-17 | 9.1 Critical |
| The WPvivid — Backup, Migration & Staging WordPress plugin before 0.9.131 does not sanitise a value taken from an unauthenticated request before using it to build a log file path, allowing an attacker holding a site to site transfer key to create a log file in any existing writable directory of the site, including the web root. The file name always carries a fixed suffix and the contents are always the WPvivid — Backup, Migration & Staging WordPress plugin before 0.9.131's own log header, so only the location of the file is attacker controlled. | ||||
| CVE-2026-67965 | 2026-08-17 | N/A | ||
| An issue in Tneda W20E v.16.01.0.6(2782) allows a remote attacker to execute arbitrary code via the url_need_login function | ||||
| CVE-2026-39255 | 1 Steelseries | 1 Gg | 2026-08-17 | N/A |
| Buffer Overflow vulnerability in SteelSeries GG (macOS) v.107.0.0 allows a remote attacker to execute arbitrary code via the libSSEdevice.dylib, dup_wcs components | ||||
| CVE-2026-51977 | 2026-08-17 | N/A | ||
| An issue in Trueview T18061 WiFi 3MP Robot Pan-Tilt Security Camera Version 1.0 allows a physically proximate attacker to escalate privileges via the RSA private key component | ||||
| CVE-2026-67960 | 2026-08-17 | N/A | ||
| An issue in PbootCMS v.3.2.15 allows an attacker to execute arbitrary code via the MemberController.php, UserController.php, CommentController.php, ContentController.php, and helper.php components | ||||
| CVE-2026-59850 | 2 Libssh, Redhat | 4 Libssh, Enterprise Linux, Hardened Images and 1 more | 2026-08-17 | 4.3 Medium |
| A flaw was found in libssh. If data packets are processed after a channel is closed, channel data callbacks can be invoked after the associated data has already been freed, leading to crashes or possible use-after-free conditions. | ||||
| CVE-2026-59848 | 2 Libssh, Redhat | 4 Libssh, Enterprise Linux, Hardened Images and 1 more | 2026-08-17 | 5.3 Medium |
| A flaw was found in libssh. A malicious SFTP server can send responses for unknown request IDs that libssh clients keep queued indefinitely, causing unbounded memory growth and client-side denial of service. | ||||
| CVE-2026-59847 | 2 Libssh, Redhat | 4 Libssh, Enterprise Linux, Hardened Images and 1 more | 2026-08-17 | 5.9 Medium |
| A flaw was found in libssh. Incorrect AES-GCM finalization checks in builds using the OpenSSL backend can effectively remove integrity protection, allowing an in-path attacker to modify plaintext on the wire without detection. | ||||
| CVE-2026-59845 | 2 Libssh, Redhat | 4 Libssh, Enterprise Linux, Hardened Images and 1 more | 2026-08-17 | 5.3 Medium |
| A flaw was found in libssh. When ProxyCommand is used, an unchecked fork() failure can be stored as process ID -1; during cleanup, signals may then be sent across the caller's accessible process tree, leading to local denial of service. | ||||
| CVE-2026-59844 | 2 Libssh, Redhat | 4 Libssh, Enterprise Linux, Hardened Images and 1 more | 2026-08-17 | 6.5 Medium |
| A flaw was found in libssh. A remote authenticated client can issue SSH_FXP_READ requests with an arbitrarily large length, causing a libssh SFTP server to allocate excessive memory and potentially exhaust it through repeated requests. | ||||
| CVE-2026-59843 | 2 Libssh, Redhat | 4 Libssh, Enterprise Linux, Hardened Images and 1 more | 2026-08-17 | 6.5 Medium |
| A flaw was found in libssh. A remote authenticated peer can advertise a zero maximum packet size in SSH_MSG_CHANNEL_OPEN, causing later channel writes to loop indefinitely and consume CPU, leading to denial of service. | ||||