Export limit exceeded: 345446 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (345446 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-30812 | 1 Pandora Fms | 1 Pandora Fms | 2026-04-17 | N/A |
| Improper Neutralization of Input During Web Page Generation vulnerability allows Stored Cross-Site Scripting via event comments. This issue affects Pandora FMS: from 777 through 800 | ||||
| CVE-2026-32316 | 1 Jqlang | 1 Jq | 2026-04-17 | 8.2 High |
| jq is a command-line JSON processor. An integer overflow vulnerability exists through version 1.8.1 within the jvp_string_append() and jvp_string_copy_replace_bad functions, where concatenating strings with a combined length exceeding 2^31 bytes causes a 32-bit unsigned integer overflow in the buffer allocation size calculation, resulting in a drastically undersized heap buffer. Subsequent memory copy operations then write the full string data into this undersized buffer, causing a heap buffer overflow classified as CWE-190 (Integer Overflow) leading to CWE-122 (Heap-based Buffer Overflow). Any system evaluating untrusted jq queries is affected, as an attacker can crash the process or potentially achieve further exploitation through heap corruption by crafting queries that produce extremely large strings. The root cause is the absence of string size bounds checking, unlike arrays and objects which already have size limits. The issue has been addressed in commit e47e56d226519635768e6aab2f38f0ab037c09e5. | ||||
| CVE-2026-32605 | 1 Nimiq | 1 Core-rs-albatross | 2026-04-17 | 7.5 High |
| nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to version 1.3.0, an untrusted peer could crash a validator by publishing a signed tendermint proposal message where signer == validators.num_validators(). ProposalSender::send uses > instead of >= for the signer bounds check, so the equality case passes and reaches validators.get_validator_by_slot_band(signer), which panics with an out-of-bounds index before any signature verification runs. This issue has been fixed in version 1.3.0. | ||||
| CVE-2026-33534 | 1 Espocrm | 1 Espocrm | 2026-04-17 | 4.3 Medium |
| EspoCRM is an open source customer relationship management application. Versions 9.3.3 and below have an authenticated Server-Side Request Forgery (SSRF) vulnerability that allows bypassing the internal-host validation logic by using alternative IPv4 representations such as octal notation (e.g., 0177.0.0.1 instead of 127.0.0.1). This is caused by HostCheck::isNotInternalHost() function relying on PHP's filter_var(..., FILTER_VALIDATE_IP), which does not recognize alternative IP formats, causing the validation to fall through to a DNS lookup that returns no records and incorrectly treats the host as safe, however the cURL subsequently normalizes the address and connects to the loopback destination. Through the confirmed /api/v1/Attachment/fromImageUrl endpoint, an authenticated user can force the server to make requests to loopback-only services and store the fetched response as an attachment. This vulnerability is distinct from CVE-2023-46736 (which involved redirect-based SSRF) and may allow access to internal resources reachable from the application runtime. This issue has been fixed in version 9.3.4. | ||||
| CVE-2026-33657 | 1 Espocrm | 1 Espocrm | 2026-04-17 | 4.6 Medium |
| EspoCRM is an open source customer relationship management application. Versions 9.3.3 and below have a stored HTML injection vulnerability that allows any authenticated user with standard (non-administrative) privileges to inject arbitrary HTML into system-generated email notifications by crafting malicious content in the post field of stream activity notes. The vulnerability exists because server-side Handlebars templates render the post field using unescaped triple-brace syntax, the Markdown processor preserves inline HTML by default, and the rendering pipeline explicitly skips sanitization for fields present in additionalData, creating a path where attacker-controlled HTML is accepted, stored, and rendered directly into emails without any escaping. Since the emails are sent using the system's configured SMTP identity (such as an administrative sender address), the injected content appears fully trusted to recipients, enabling phishing attacks, user tracking via embedded resources like image beacons, and UI manipulation within email content. The @mention feature further increases the impact by allowing targeted delivery of malicious emails to specific users. This issue has been fixed in version 9.3.4. | ||||
| CVE-2026-34186 | 1 Pandora Fms | 1 Pandora Fms | 2026-04-17 | N/A |
| Improper Neutralization of Special Elements used in an SQL Command vulnerability allows SQL Injection via custom fields. This issue affects Pandora FMS: from 777 through 800 | ||||
| CVE-2026-0209 | 1 Purestorage | 1 Flasharray | 2026-04-17 | N/A |
| Under certain administrative conditions, FlashArray Purity may apply snapshot retention policies earlier or later than configured. | ||||
| CVE-2026-24907 | 1 Octobercms | 1 October | 2026-04-17 | N/A |
| October is a Content Management System (CMS) and web platform. Versions prior to 3.7.14 and 4.1.10 contain a stored cross-site scripting (XSS) vulnerability in the Event Log mail preview feature. When viewing logged mail messages, HTML content was rendered in an iframe without proper sandboxing, allowing JavaScript execution in the viewer's browser context. This issue has been fixed in versions 3.7.14 and 4.1.10. If users are unable to update immediately, workarounds include restricting mail template editing permissions to fully trusted administrators only and restricting Event Log viewing permissions to minimize exposure. | ||||
| CVE-2026-25133 | 1 Octobercms | 1 October | 2026-04-17 | N/A |
| October is a Content Management System (CMS) and web platform. Versions prior to 3.7.14 and 4.1.10 contain a stored cross-site scripting (XSS) vulnerability in the SVG sanitization logic. The regex pattern used to strip event handler attributes (such as onclick or onload) could be bypassed using a crafted payload that exploits how the pattern matches attribute boundaries, allowing malicious SVG files to be uploaded through the Media Manager with embedded JavaScript. Exploitation could lead to privilege escalation if a superuser views or embeds the malicious SVG, and requires authenticated backend access with media upload permissions. The SVG must be viewed or embedded in a page for the payload to trigger. This issue has been fixed in versions 3.7.14 and 4.1.10. | ||||
| CVE-2026-33018 | 1 Saitoha | 1 Libsixel | 2026-04-17 | 7 High |
| libsixel is a SIXEL encoder/decoder implementation derived from kmiya's sixel. Versions 1.8.7 and prior contain a Use-After-Free vulnerability via the load_gif() function in fromgif.c, where a single sixel_frame_t object is reused across all frames of an animated GIF and gif_init_frame() unconditionally frees and reallocates frame->pixels between frames without consulting the object's reference count. Because the public API explicitly provides sixel_frame_ref() to retain a frame and sixel_frame_get_pixels() to access the raw pixel buffer, a callback following this documented usage pattern will hold a dangling pointer after the second frame is decoded, resulting in a heap use-after-free confirmed by ASAN. Any application using sixel_helper_load_image_file() with a multi-frame callback to process user-supplied animated GIFs is affected, with a reliable crash as the minimum impact and potential for code execution. This issue has been fixed in version 1.8.7-r1. | ||||
| CVE-2026-33020 | 1 Saitoha | 1 Libsixel | 2026-04-17 | 7.1 High |
| libsixel is a SIXEL encoder/decoder implementation derived from kmiya's sixel. Versions 1.8.7 and prior contain an integer overflow which leads to a heap buffer overflow via sixel_frame_convert_to_rgb888() in frame.c, where allocation size and pointer offset computations for palettised images (PAL1, PAL2, PAL4) are performed using int arithmetic before casting to size_t. For images whose pixel count exceeds INT_MAX / 4, the overflow produces an undersized heap allocation for the conversion buffer and a negative pointer offset for the normalization sub-buffer, after which sixel_helper_normalize_pixelformat() writes the full image data starting from the invalid pointer, causing massive heap corruption confirmed by ASAN. An attacker providing a specially crafted large palettised PNG can corrupt the heap of the victim process, resulting in a reliable crash and potential arbitrary code execution. This issue has been fixed in version 1.8.7-r1. | ||||
| CVE-2026-33021 | 1 Saitoha | 1 Libsixel | 2026-04-17 | 7.3 High |
| libsixel is a SIXEL encoder/decoder implementation derived from kmiya's sixel. Versions 1.8.7 and prior contain a use-after-free vulnerability in sixel_encoder_encode_bytes() because sixel_frame_init() stores the caller-owned pixel buffer pointer directly in frame->pixels without making a defensive copy. When a resize operation is triggered, sixel_frame_convert_to_rgb888() unconditionally frees this caller-owned buffer and replaces it with a new internal allocation, leaving the caller with a dangling pointer. Any subsequent access to the original buffer by the caller constitutes a use-after-free, confirmed by AddressSanitizer. An attacker who controls incoming frames can trigger this bug repeatedly and predictably, resulting in a reliable crash with potential for code execution. This issue has been fixed in version 1.8.7-r1. | ||||
| CVE-2026-33414 | 1 Containers | 1 Podman | 2026-04-17 | 8.8 High |
| Podman is a tool for managing OCI containers and pods. Versions 4.8.0 through 5.8.1 contain a command injection vulnerability in the HyperV machine backend in pkg/machine/hyperv/stubber.go, where the VM image path is inserted into a PowerShell double-quoted string without sanitization, allowing $() subexpression injection. Because PowerShell evaluates subexpressions inside double-quoted strings before executing the outer command, an attacker who can control the VM image path through a crafted machine name or image directory can execute arbitrary PowerShell commands with the privileges of the Podman process. On typical Windows installations this means SYSTEM-level code execution, and only Windows is affected as the code is exclusive to the HyperV backend. This issue has been patched in version 5.8.2. | ||||
| CVE-2026-34160 | 1 Chamilo | 1 Chamilo Lms | 2026-04-17 | 8.6 High |
| Chamilo LMS is an open-source learning management system. In versions prior to 2.0.0-RC.3, the PENS (Package Exchange Notification Services) plugin endpoint at public/plugin/Pens/pens.php is accessible without authentication and accepts a user-controlled package-url parameter that the server fetches using curl without filtering private or internal IP addresses, enabling unauthenticated Server-Side Request Forgery (SSRF). An attacker can exploit this to probe internal network services, access cloud metadata endpoints (such as 169.254.169.254) to steal IAM credentials and sensitive instance metadata, or trigger state-changing operations on internal services via the receipt and alerts callback parameters. No authentication is required to exploit either SSRF vector, significantly increasing the attack surface. This issue has been fixed in version 2.0.0-RC.3. | ||||
| CVE-2026-34161 | 1 Chamilo | 1 Chamilo Lms | 2026-04-17 | N/A |
| Chamilo LMS is an open-source learning management system. In versions prior to 2.0.0-RC.3, a Stored Cross-Site Scripting (XSS) vulnerability exists in the social post attachment upload functionality, where an authenticated user can upload a malicious HTML file containing JavaScript via the /api/social_post_attachments endpoint. The uploaded file is served back from the application at the generated contentUrl without sanitization, content type restrictions, or a Content-Disposition: attachment header, causing the JavaScript to execute in the browser within the application's origin. Because the payload is stored server-side and runs in the trusted origin, an attacker can perform session hijacking, account takeover, privilege escalation (if an admin views the link), and arbitrary actions on behalf of the victim. This issue has been fixed in version 2.0.0-RC.3. | ||||
| CVE-2026-34454 | 1 Oauth2 Proxy Project | 1 Oauth2 Proxy | 2026-04-17 | 3.5 Low |
| OAuth2 Proxy is a reverse proxy that provides authentication using OAuth2 providers. A regression introduced in 7.11.0 prevents OAuth2 Proxy from clearing the session cookie when rendering the sign-in page. In deployments that rely on the sign-in page as part of their logout flow, a user may be shown the sign-in page while the existing session cookie remains valid, meaning the browser session is not actually logged out. On shared workstations or devices, a subsequent user could continue to use the previous user's authenticated session. Deployments that use a dedicated logout/sign-out endpoint to terminate sessions are not affected. This issue is fixed in 7.15.2 | ||||
| CVE-2026-35033 | 1 Jellyfin | 1 Jellyfin | 2026-04-17 | N/A |
| Jellyfin is an open source self hosted media server. Versions prior to 10.11.7 contain an unauthenticated arbitrary file read vulnerability via ffmpeg argument injection through the StreamOptions query parameter parsing mechanism. The ParseStreamOptions method in StreamingHelpers.cs adds any lowercase query parameter to a dictionary without validation, bypassing the RegularExpression attribute on the level controller parameter, and the unsanitized value is concatenated directly into the ffmpeg command line. By injecting a drawtext filter with a textfile argument, an attacker can read arbitrary server files such as /etc/shadow and exfiltrate their contents as text rendered in the video stream response. The vulnerable /Videos/{itemId}/stream endpoint has no Authorize attribute, making this exploitable without authentication, though item GUIDs are pseudorandom and require an authenticated user to obtain. This issue has been fixed in version 10.11.7. | ||||
| CVE-2026-35034 | 1 Jellyfin | 1 Jellyfin | 2026-04-17 | 6.5 Medium |
| Jellyfin is an open source self hosted media server. Versions prior to 10.11.7 contain a denial of service vulnerability in the SyncPlay group creation endpoint (POST /SyncPlay/New), where an authenticated user can create groups with names of unlimited size due to insufficient input validation. By sending large payloads combined with arbitrary group IDs, an attacker can lock out the endpoint for other clients attempting to join SyncPlay groups and significantly increase the memory usage of the Jellyfin process, potentially leading to an out-of-memory crash. This issue has been fixed in version 10.11.7. | ||||
| CVE-2026-38529 | 1 Krayin | 1 Laravel-crm | 2026-04-17 | 8.8 High |
| A Broken Object-Level Authorization (BOLA) in the /Settings/UserController.php endpoint of Webkul Krayin CRM v2.2.x allows authenticated attackers to arbitrarily reset user passwords and perform a full account takeover via supplying a crafted HTTP request. | ||||
| CVE-2026-39387 | 1 Boidcms | 1 Boidcms | 2026-04-17 | 7.2 High |
| BoidCMS is an open-source, PHP-based flat-file CMS for building simple websites and blogs, using JSON as its database. Versions prior to 2.1.3 are vulnerable to a critical Local File Inclusion (LFI) attack via the tpl parameter, which can lead to Remote Code Execution (RCE).The application fails to sanitize the tpl (template) parameter during page creation and updates. This parameter is passed directly to a require_once() statement without path validation. An authenticated administrator can exploit this by injecting path traversal sequences (../) into the tpl value to escape the intended theme directory and include arbitrary files — specifically, files from the server's media/ directory. When combined with the file upload functionality, this becomes a full RCE chain: an attacker can first upload a file with embedded PHP code (e.g., disguised as image data), then use the path traversal vulnerability to include that file via require_once(), executing the embedded code with web server privileges. This issue has been fixed in version 2.1.3. | ||||