Export limit exceeded: 348706 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 348706 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (348706 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-42520 | 2 Jenkins, Jenkins Project | 2 Credentials Binding, Jenkins Credentials Binding Plugin | 2026-05-06 | 7.5 High |
| Jenkins Credentials Binding Plugin 719.v80e905ef14eb_ and earlier does not sanitize file names for file and zip file credentials, allowing attackers able to provide credentials to a job to write files to arbitrary locations on the node filesystem, which can lead to remote code execution if Jenkins is configured to allow a low-privileged user to configure file or zip file credentials used for a job running on the built-in node. | ||||
| CVE-2026-20079 | 1 Cisco | 1 Secure Firewall Management Center | 2026-05-06 | 10 Critical |
| A vulnerability in the web interface of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass authentication and execute script files on an affected device to obtain root access to the underlying operating system. This vulnerability is due to an improper system process that is created at boot time. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute a variety of scripts and commands that allow root access to the device. | ||||
| CVE-2026-43134 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ This adds a check for encryption key size upon receiving L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which expects L2CAP_CR_LE_BAD_KEY_SIZE. | ||||
| CVE-2026-43138 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: reset: gpio: suppress bind attributes in sysfs This is a special device that's created dynamically and is supposed to stay in memory forever. We also currently don't have a devlink between it and the actual reset consumer. Suppress sysfs bind attributes so that user-space can't unbind the device because - as of now - it will cause a use-after-free splat from any user that puts the reset control handle. | ||||
| CVE-2026-43140 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: Do not crash on missing msc->input Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, msc->input stays NULL, leading to a crash at a later time. Detect this condition in the input_configured() hook and reject the device. This is not supposed to happen with actual magic mouse devices, but can be provoked by imposing as a magic mouse USB device. | ||||
| CVE-2026-43142 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: gen1: Destroy internal buffers after FW releases After the firmware releases internal buffers, the driver was not destroying them. This left stale allocations that were no longer used, especially across resolution changes where new buffers are allocated per the updated requirements. As a result, memory was wasted until session close. Destroy internal buffers once the release response is received from the firmware. | ||||
| CVE-2026-43181 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: sysfs: fix chip removal with GPIOs exported over sysfs Currently if we export a GPIO over sysfs and unbind the parent GPIO controller, the exported attribute will remain under /sys/class/gpio because once we remove the parent device, we can no longer associate the descriptor with it in gpiod_unexport() and never drop the final reference. Rework the teardown code: provide an unlocked variant of gpiod_unexport() and remove all exported GPIOs with the sysfs_lock taken before unregistering the parent device itself. This is done to prevent any new exports happening before we unregister the device completely. | ||||
| CVE-2026-43124 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pstore: ram_core: fix incorrect success return when vmap() fails In persistent_ram_vmap(), vmap() may return NULL on failure. If offset is non-zero, adding offset_in_page(start) causes the function to return a non-NULL pointer even though the mapping failed. persistent_ram_buffer_map() therefore incorrectly returns success. Subsequent access to prz->buffer may dereference an invalid address and cause crashes. Add proper NULL checking for vmap() failures. | ||||
| CVE-2026-43171 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: EFI/CPER: don't dump the entire memory region The current logic at cper_print_fw_err() doesn't check if the error record length is big enough to handle offset. On a bad firmware, if the ofset is above the actual record, length -= offset will underflow, making it dump the entire memory. The end result can be: - the logic taking a lot of time dumping large regions of memory; - data disclosure due to the memory dumps; - an OOPS, if it tries to dump an unmapped memory region. Fix it by checking if the section length is too small before doing a hex dump. [ rjw: Subject tweaks ] | ||||
| CVE-2026-43173 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: xscale: Check for PTP support properly In ixp4xx_get_ts_info() ixp46x_ptp_find() is called unconditionally despite this feature only existing on ixp46x, leading to the following splat from tcpdump: root@OpenWrt:~# tcpdump -vv -X -i eth0 (...) Unable to handle kernel NULL pointer dereference at virtual address 00000238 when read (...) Call trace: ptp_clock_index from ixp46x_ptp_find+0x1c/0x38 ixp46x_ptp_find from ixp4xx_get_ts_info+0x4c/0x64 ixp4xx_get_ts_info from __ethtool_get_ts_info+0x90/0x108 __ethtool_get_ts_info from __dev_ethtool+0xa00/0x2648 __dev_ethtool from dev_ethtool+0x160/0x234 dev_ethtool from dev_ioctl+0x2cc/0x460 dev_ioctl from sock_ioctl+0x1ec/0x524 sock_ioctl from sys_ioctl+0x51c/0xa94 sys_ioctl from ret_fast_syscall+0x0/0x44 (...) Segmentation fault Check for ixp46x in ixp46x_ptp_find() before trying to set up PTP to avoid this. To avoid altering the returned error code from ixp4xx_hwtstamp_set() which before this patch was -EOPNOTSUPP, we return -EOPNOTSUPP from ixp4xx_hwtstamp_set() if ixp46x_ptp_find() fails no matter the error code. The helper function ixp46x_ptp_find() helper returns -ENODEV. | ||||
| CVE-2026-43187 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: delete attr leaf freemap entries when empty Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow"), Brian Foster observed that it's possible for a small freemap at the end of the end of the xattr entries array to experience a size underflow when subtracting the space consumed by an expansion of the entries array. There are only three freemap entries, which means that it is not a complete index of all free space in the leaf block. This code can leave behind a zero-length freemap entry with a nonzero base. Subsequent setxattr operations can increase the base up to the point that it overlaps with another freemap entry. This isn't in and of itself a problem because the code in _leaf_add that finds free space ignores any freemap entry with zero size. However, there's another bug in the freemap update code in _leaf_add, which is that it fails to update a freemap entry that begins midway through the xattr entry that was just appended to the array. That can result in the freemap containing two entries with the same base but different sizes (0 for the "pushed-up" entry, nonzero for the entry that's actually tracking free space). A subsequent _leaf_add can then allocate xattr namevalue entries on top of the entries array, leading to data loss. But fixing that is for later. For now, eliminate the possibility of confusion by zeroing out the base of any freemap entry that has zero size. Because the freemap is not intended to be a complete index of free space, a subsequent failure to find any free space for a new xattr will trigger block compaction, which regenerates the freemap. It looks like this bug has been in the codebase for quite a long time. | ||||
| CVE-2026-43189 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-async: Fix error handling on steps after finding a match Once an async connection is found to be matching with an fwnode, a sub-device may be registered (in case it wasn't already), its bound operation is called, ancillary links are created, the async connection is added to the sub-device's list of connections and removed from the global waiting connection list. Further on, the sub-device's possible own notifier is searched for possible additional matches. Fix these specific issues: - If v4l2_async_match_notify() failed before the sub-notifier handling, the async connection was unbound and its entry removed from the sub-device's async connection list. The latter part was also done in v4l2_async_match_notify(). - The async connection's sd field was only set after creating ancillary links in v4l2_async_match_notify(). It was however dereferenced in v4l2_async_unbind_subdev_one(), which was called on error path of v4l2_async_match_notify() failure. | ||||
| CVE-2026-43191 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35 [Why] A backport of the change made for DCN401 that addresses an issue where we turn off the PHY PLL when disabling TMDS output, which causes the OTG to remain stuck. The OTG being stuck can lead to a hang in the DCHVM's ability to ACK invalidations when it thinks the HUBP is still on but it's not receiving global sync. The transition to PLL_ON needs to be atomic as there's no guarantee that the thread isn't pre-empted or is able to complete before the IOMMU watchdog times out. [How] Backport the implementation from dcn401 back to dcn35. There's a functional difference in when the eDP output is disabled in dcn401 code so we don't want to utilize it directly. | ||||
| CVE-2026-43193 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfs4_file refcount leak in nfsd_get_dir_deleg() Claude pointed out that there is a nfs4_file refcount leak in nfsd_get_dir_deleg(). Ensure that the reference to "fp" is released before returning. | ||||
| CVE-2026-43194 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok <ok>| ok ok ok <x> \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link). | ||||
| CVE-2026-42521 | 2 Jenkins, Jenkins Project | 2 Matrix Authorization Strategy, Jenkins Matrix Authorization Strategy Plugin | 2026-05-06 | 6.5 Medium |
| Jenkins Matrix Authorization Strategy Plugin 2.0-beta-1 through 3.2.9 (both inclusive) invokes parameterless constructors of classes specified in configuration when deserializing inheritance strategies, without restricting the classes that can be instantiated, allowing attackers with Item/Configure permission to instantiate arbitrary types, which may lead to information disclosure or other impacts depending on the classes available on the classpath. | ||||
| CVE-2026-42522 | 2 Jenkins, Jenkins Project | 2 Github Branch Source, Jenkins Github Branch Source Plugin | 2026-05-06 | 4.3 Medium |
| A missing permission check in Jenkins GitHub Branch Source Plugin 1967.vdea_d580c1a_b_a_ and earlier allows attackers with Overall/Read permission to connect to an attacker-specified URL with attacker-specified GitHub App credentials. | ||||
| CVE-2026-7573 | 1 Velocidex | 1 Velociraptor | 2026-05-06 | 5 Medium |
| An authorization bypass (CWE-639) in the GetUserRoles gRPC API endpoint in Velocidex Velociraptor below version 0.76.5 allows any authenticated low-privilege user to retrieve the complete ACL policy (roles and permissions) for any user across all organizations by supplying targeted Name and Org parameters via a network request. | ||||
| CVE-2026-7111 | 1 Hmbrand | 2 Text::csv Xs, Text\ | 2026-05-06 | 8.4 High |
| Text::CSV_XS versions before 1.62 for Perl have a use-after-free when registered callbacks extend the Perl argument stack, which may enable type confusion or memory corruption. The Parse, print, getline, and getline_all methods invoke registered callbacks (for example after_parse, before_print, or on_error) and cache the Perl argument stack pointer across the call. If a callback extends the argument stack enough to trigger a reallocation, the return value is written through the stale pointer into the freed buffer, and the caller reads the original $self argument as the return value instead. Calling code that expects parsed data from getline_all receives the Text::CSV_XS object in its place, leading to logic errors or crashes. Text::CSV_XS objects used without any registered callbacks are not affected. | ||||
| CVE-2026-25243 | 1 Redis | 1 Redis | 2026-05-06 | 8.8 High |
| Redis is an in-memory data structure store. In versions of redis-server up to 8.6.3, the RESTORE command does not properly validate serialized values. An authenticated attacker with permission to execute RESTORE can supply a crafted serialized payload that triggers invalid memory access and may lead to remote code execution. A workaround is to restrict access to the RESTORE command with ACL rules. This is patched in version 8.6.3. | ||||