Export limit exceeded: 360964 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (360964 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53179 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix buffer over-read in rtw_update_protection rtw_update_protection() is called with a pointer offset into the ies buffer but the full ie_length is passed, causing a potential buffer over-read. | ||||
| CVE-2026-53184 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: udp: clear skb->dev before running a sockmap verdict On the UDP receive path skb->dev is repurposed as dev_scratch (the truesize/state cache set by udp_set_dev_scratch()), through the union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff. When a UDP socket is in a sockmap, sk_data_ready is sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor() (sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq. If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp, bpf_skc_lookup_tcp), bpf_skc_lookup() does: if (skb->dev) caller_net = dev_net(skb->dev); skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net() dereferences it as a struct net_device * and the kernel takes a general protection fault on a non-canonical address in softirq: Oops: general protection fault, probably for non-canonical address 0x1010000800004a0 CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full) RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline] RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047 Call Trace: <IRQ> bpf_prog_4675cb904b7071f8+0x12e/0x14e bpf_prog_run_pin_on_cpu+0xc6/0x1f0 sk_psock_verdict_recv+0x1ba/0x350 udp_read_skb+0x31a/0x370 sk_psock_verdict_data_ready+0x2e3/0x600 __udp_enqueue_schedule_skb+0x4c8/0x650 udpv6_queue_rcv_one_skb+0x3ec/0x740 udp6_unicast_rcv_skb+0x11d/0x140 ip6_protocol_deliver_rcu+0x61e/0x950 ip6_input_finish+0xa9/0x150 NF_HOOK+0x286/0x2f0 ip6_input+0x117/0x220 NF_HOOK+0x286/0x2f0 __netif_receive_skb+0x85/0x200 process_backlog+0x374/0x9a0 __napi_poll+0x4f/0x1c0 net_rx_action+0x3b0/0x770 handle_softirqs+0x15a/0x460 do_softirq+0x57/0x80 </IRQ> The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which skb_set_owner_sk_safe() set just above. | ||||
| CVE-2026-53239 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx() Fix the race by pruning the bin while still holding xfrm_policy_lock, before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since the lock is already held. The wrapper xfrm_policy_inexact_prune_bin() becomes unused and is removed. Race: CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO) ========================== ========================== xfrm_policy_bysel_ctx(): spin_lock_bh(xfrm_policy_lock) bin = xfrm_policy_inexact_lookup() __xfrm_policy_unlink(pol) spin_unlock_bh(xfrm_policy_lock) xfrm_policy_kill(ret) // wide window, lock not held xfrm_hash_rebuild(): spin_lock_bh(xfrm_policy_lock) __xfrm_policy_inexact_flush(): kfree_rcu(bin) // bin freed spin_unlock_bh(xfrm_policy_lock) xfrm_policy_inexact_prune_bin(bin) // UAF: bin is freed | ||||
| CVE-2026-53241 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: dummy: fix UMP event stack overread The dummy sequencer port forwards events by copying an incoming struct snd_seq_event into a stack temporary, rewriting source and destination, and dispatching the temporary to subscribers. That legacy event storage is smaller than struct snd_seq_ump_event. When a UMP event reaches the dummy client, the copy leaves the UMP flag set but only provides legacy-sized stack storage. The subscriber delivery path then uses snd_seq_event_packet_size() and copies a UMP-sized packet from that stack object, reading past the end of the temporary. Use the existing union __snd_seq_event storage and copy the packet size reported for the incoming event before rewriting the common routing fields. This preserves the full UMP packet for UMP events while keeping legacy event handling unchanged. | ||||
| CVE-2026-53242 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streams snd_pcm_drain() uses init_waitqueue_entry which does not clear entry.prev/next, and add_wait_queue with a conditional remove_wait_queue that is skipped when to_check is no longer in the group after concurrent UNLINK. The orphaned wait entry remains on the unlinked substream sleep queue. On the next drain iteration, add_wait_queue adds the entry to a new queue while still linked on the old one, corrupting both lists. A subsequent wake_up dereferences NULL at the func pointer (mapped from the spinlock at offset 0 of the misinterpreted wait_queue_head_t), causing a kernel panic. Replace init_waitqueue_entry/add_wait_queue/conditional remove_wait_queue with init_wait_entry/prepare_to_wait/ finish_wait. init_wait_entry clears prev/next via INIT_LIST_HEAD on each iteration and sets autoremove_wake_function which auto-removes the entry on wake-up. finish_wait safely handles both the already-removed and still-queued cases. | ||||
| CVE-2026-53152 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: dw_mmc-rockchip: Add missing private data for very old controllers The really old controllers (rk2928, rk3066, rk3188) do not support UHS speeds at all, and thus never handled phase data. For that reason it never had a parse_dt callback and no driver private data at all. Commit ff6f0286c896 ("mmc: dw_mmc-rockchip: Add memory clock auto-gating support") makes the private data sort of mandatory, because the init function checks whether phases are configured internally or through the clock controller. This results in the old SoCs then experiencing NULL-pointer dereferences when they try to access that private-data struct. While we could have if (priv) conditionals in all places, it's way less cluttery to just give the old types their private-data struct. | ||||
| CVE-2026-53187 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc The cpu_id attribute supplied by user space through UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu() without first verifying that the value is within the valid CPU range. Passing such untrusted data to cpumask_test_cpu() may lead to an out-of-bounds read of the underlying cpumask bitmap: the helper expands to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with no bound check. In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this turns a bad user input into a machine reboot. Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL before it is used. Reported by Smatch. | ||||
| CVE-2026-53188 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Validate the passed in fops for ib_get_ucaps() Sashiko pointed out it is not safe to rely only on the devt because char/block alias so if the user finds a block device with the same dev_t it can masquerade as a ucap cdev fd. Test the f_ops to only accept authentic cdevs. | ||||
| CVE-2026-53189 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: update file PMD counter before folio_put() __split_huge_pmd_locked() updates the file/shmem RSS counter after dropping the PMD mapping's folio reference. If folio_put() drops the last reference, mm_counter_file() can later read freed folio state via folio_test_swapbacked(). Move the counter update before folio_put(). | ||||
| CVE-2026-53194 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: kl5kusb105: fix bulk-out buffer overflow klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied. | ||||
| CVE-2026-53195 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr() build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space. | ||||
| CVE-2026-53196 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in get_manuf_info() get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). [ johan: amend commit message; also check for short descriptors ] | ||||
| CVE-2026-53198 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL A deferred byte-range lock (an SMB2_LOCK that blocks) registers an async work on conn->async_requests via setup_async_work(), with cancel_fn = smb2_remove_blocked_lock and cancel_argv[0] pointing at the struct file_lock. When the request is cancelled, the worker frees the file_lock with locks_free_lock() and takes the cancelled early-exit, which "goto out"s and never reaches release_async_work() -- the only site that unlinks the work from conn->async_requests and clears cancel_fn/cancel_argv. The work therefore stays matchable on async_requests with a live cancel_fn pointing at the freed file_lock, until connection teardown finally runs release_async_work(). smb2_cancel() fires cancel_fn unconditionally with no state guard, so a second SMB2_CANCEL for the same AsyncId, arriving in that window, re-runs smb2_remove_blocked_lock() on the freed file_lock -- a slab use-after-free: BUG: KASAN: slab-use-after-free in __locks_delete_block __locks_delete_block locks_delete_block ksmbd_vfs_posix_lock_unblock smb2_remove_blocked_lock smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn handle_ksmbd_work Allocated by ...: locks_alloc_lock <- smb2_lock Freed by ...: locks_free_lock <- smb2_lock (cancelled branch) ... cache file_lock_cache of size 192 Reproduced on mainline with KASAN by an authenticated SMB client. Skip a work whose state is already KSMBD_WORK_CANCELLED so its cancel callback cannot be fired a second time. | ||||
| CVE-2026-53199 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf netvsc_copy_to_send_buf() copies page buffer entries into the VMBus send buffer using phys_to_virt() on the entry PFN. Entries for the RNDIS header and the skb linear data come from kmalloc'd memory and are always in the kernel direct map, but entries for skb fragments reference page cache or user pages, which on 32-bit x86 with CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page phys_to_virt() returns an address outside the direct map and the subsequent memcpy() faults on the transmit softirq path, which is fatal. Map the pages with kmap_local_page() instead, handling two properties of the page buffer entries: - pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity, not a native PFN. Reconstruct the physical address first and derive the native page from it, so the mapping stays correct where PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages). - Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN grouping in the page buffer array"), an entry describes a full physically contiguous fragment and pb[i].len can exceed PAGE_SIZE, while kmap_local_page() maps a single page. Copy page by page, splitting at native page boundaries. The copy path only handles packets smaller than the send section size (6144 bytes by default); larger packets take the cp_partial path where only the RNDIS header is copied. So entries here are bounded by the section size and a copy is split at most once on 4K-page systems. On !CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and no mapping work is added. | ||||
| CVE-2026-53155 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: use correct flags for device private PMD entry Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support device-private entries") updated set_pmd_migration_entry() to use pmdp_huge_get_and_clear() in the softleaf case, but made no further adjustments to the function itself. Therefore this function continues to incorrectly use pmd_write(), pmd_soft_dirty() and pmd_uffd_wp() to determine whether the installed migration entry should be marked writable, softdirty or uffd-wp respectively. Whilst all are incorrect, the most problematic of these is pmd_write(), as this can lead to corrupted rmap state. On x86-64 _PAGE_SWP_SOFT_DIRTY is aliased to _PAGE_RW. So calling pmd_write() on a softleaf will return the softdirty state encoded in the entry, assuming CONFIG_MEM_SOFT_DIRTY was enabled. This was observed when running the hmm.hmm_device_private.anon_write_child selftest: 1. The test faults in a range then migrates it such that a device-private THP range is established. 2. The parent then migrates it to a device-private writable PMD entry whose folio is entirely AnonExclusive with entire_mapcount=1, softdirty set (accidentally correct write state). 3. The parent forks and the PMD entries are set to device-private read only entries, entire_mapcount=2, softdirty still set. 4. [BUG] The child writes to the range then migrates to RAM - intending to install non-writable migration entries - but replacing parent and child PMD mappings with WRITABLE entries due to misinterpreting the softdirty bit. 5. In remove_migration_pmd(), if !softleaf_is_migration_read(entry) we set the RMAP_EXCLUSIVE flag when calling folio_add_anon_rmap_pmd() for both parent and child, which are therefore AnonExclusive. 6. [SPLAT] Child sets migrated folio entire_mapcount=1, parent sets entire_mapcount=2 and we end up with an AnonExclusive folio with entire_mapcount=2! Assert fires in __folio_add_anon_rmap(): VM_WARN_ON_FOLIO(folio_test_large(folio) && folio_entire_mapcount(folio) > 1 && PageAnonExclusive(cur_page), folio) This patch fixes the issue by correctly referencing the softleaf entry fields for writable, softdirty and uffd-wp in set_pmd_migration_entry(). It also only updates A/D flags if the entry is present as these are otherwise not meaningful for a softleaf entry. This patch also flips the if (!present) { ... } else { ... } logic in set_pmd_migration_entry() so it is easier to understand, and adds some comments to make things clearer. I was able to bisect this to commit 775465fd26a3 ("lib/test_hmm: add zone device private THP test infrastructure") which first exposes this bug as it was the commit that permitted test_hmm to generate the test. However commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support device-private entries") is the commit that actually enabled this behaviour. | ||||
| CVE-2026-53160 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free race in fastrpc_map_create fastrpc_map_lookup returns a raw pointer after releasing fl->lock. The caller fastrpc_map_create then calls fastrpc_map_get (kref_get_unless_zero) on this unprotected pointer. A concurrent MEM_UNMAP can free the map between the lock release and the kref operation, resulting in a use-after-free on the freed slab object. Restore the take_ref parameter to fastrpc_map_lookup so the reference is acquired atomically under fl->lock before the pointer is exposed to the caller. | ||||
| CVE-2026-53161 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free of fastrpc_user in workqueue context There is a race between fastrpc_device_release() and the workqueue that processes DSP responses. When the user closes the file descriptor, fastrpc_device_release() frees the fastrpc_user structure. Concurrently, an in-flight DSP invocation can complete and fastrpc_rpmsg_callback() schedules context cleanup via schedule_work(&ctx->put_work). If the workqueue runs fastrpc_context_free() in parallel with or after fastrpc_device_release() has freed the user structure, it dereferences the freed fastrpc_user. Depending on the state of the context at the time of the race, any one of the following accesses can be hit: 1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx, ...) to strip the SID bits from the stored IOVA before passing the physical address to dma_free_coherent(). 2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to reconstruct the source permission bitmask needed for the qcom_scm_assign_mem() call that returns memory from the DSP VM back to HLOS. 3. fastrpc_free_map() acquires map->fl->lock to safely remove the map node from the fl->maps list. The resulting use-after-free manifests as: pc : fastrpc_buf_free+0x38/0x80 [fastrpc] lr : fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_put_wq+0x78/0xa0 [fastrpc] process_one_work+0x180/0x450 worker_thread+0x26c/0x388 Add kref-based reference counting to fastrpc_user. Have each invoke context take a reference on the user at allocation time and release it when the context is freed. Release the initial reference in fastrpc_device_release() at file close. Move the teardown of the user structure — freeing pending contexts, maps, mmaps, and the channel context reference — into the kref release callback fastrpc_user_free(), so that it runs only when the last reference is dropped, regardless of whether that happens at device close or after the final in-flight context completes. | ||||
| CVE-2026-53169 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: reject NPU_OP_RESIZE commands from userspace NPU_OP_RESIZE is a U85-only command that the driver does not yet implement. The existing WARN_ON(1) placeholder fires unconditionally whenever userspace submits this command via DRM_IOCTL_ETHOSU_GEM_CREATE, causing unbounded kernel log spam. If panic_on_warn is set the kernel panics, giving any unprivileged user with access to the DRM device a trivial denial-of-service primitive. Replace the WARN_ON(1) with an explicit -EINVAL return so the ioctl rejects the command before it reaches hardware. | ||||
| CVE-2026-53170 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: reject DMA commands with uninitialized length cmd_state_init() initializes the command state with memset(0xff), leaving dma->len at U64_MAX to signal missing setup. The only setter is NPU_SET_DMA0_LEN; if userspace omits this command and issues NPU_OP_DMA_START, dma->len remains U64_MAX. In dma_length(), a positive stride added to U64_MAX wraps to a small value. With size0 == 1, check_mul_overflow() does not trigger and dma_length() returns 0 instead of U64_MAX. The caller's U64_MAX check then passes, region_size[] stays 0, and the bounds check in ethosu_job.c is bypassed, allowing hardware to execute DMA with stale physical addresses. Fix by checking for U64_MAX at the start of dma_length() before any arithmetic, consistent with the sentinel value used throughout the driver to detect uninitialized fields. | ||||
| CVE-2026-53172 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix IFM region index out-of-bounds in command stream parser NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving a maximum value of 127. However region_size[] and output_region[] in struct ethosu_validated_cmdstream_info are both sized to NPU_BASEP_REGION_MAX (8), giving valid indices [0..7]. Every other region assignment in the same switch uses param & 0x7: NPU_SET_OFM_REGION: st.ofm.region = param & 0x7; NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7; NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7; NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7; The 0x7f mask on IFM is inconsistent and appears to be a typo. feat_matrix_length() and calc_sizes() use the region index directly as an array subscript into the kzalloc'd info struct: info->region_size[fm->region] = max(...); A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes a write up to 127*8 = 1016 bytes past the start of region_size[], corrupting adjacent kernel heap data. Fix by applying the same & 0x7 mask used by all other region assignments. | ||||