Export limit exceeded: 378311 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378311 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74539 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: lock sk in iso_sock_getname Accessing iso_pi(sk)->conn requires lock_sock, which is not held here. Fix by adding the lock/release. | ||||
| CVE-2026-74537 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: hold sk properly in iso_conn_ready sk deref in iso_conn_ready must be done either under conn->lock, or holding a refcount, to avoid concurrent close. conn->sk is currently accessed without either: [Task 1] [Task 2] iso_sock_release iso_conn_ready sk = conn->sk lock_sock(sk) conn->sk = NULL lock_sock(sk) release_sock(sk) iso_sock_kill(sk) UAF on sk deref Fix possible UAF by holding sk refcount in iso_conn_ready(). Also recheck after lock_sock that the socket is still valid. Adjust locking so conn->sk is cleared only under lock_sock. | ||||
| CVE-2026-74536 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix leaking sk after socket release iso_sock_kill() tests !sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket || sock_flag(sk, SOCK_DEAD) for early return, but this is always true since sock_orphan(sk) sets SOCK_DEAD, so the sk reference released by socket always leaks, iso_sock_destruct is never called. The socket reference also leaks when __iso_sock_close() does not set SOCK_ZAPPED, since iso_conn_del() does not call iso_sock_kill() after zapping. Fix by replacing SOCK_DEAD by BT_SK_KILLED flag that is not used for something else, and lock_sock to ensure iso_sock_kill() puts sk only after socket release only once. Release and iso_conn_del may run concurrently. Call iso_sock_kill() from iso_conn_del() to clean sk up after zapping. Remove call to iso_sock_kill() from iso_sock_close(), as it's generally no-op there. | ||||
| CVE-2026-74527 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Block VFs from clobbering special CGX PKIND state PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must not reset the LMAC RX PKIND or default TX parse config over the PF setup. Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. | ||||
| CVE-2026-74510 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix UAF in pair command cancellation The pairing completion and authentication failure callbacks look up the pending MGMT_OP_PAIR_DEVICE command by walking hdev->mgmt_pending. The lookup returned a command that was still linked on the shared pending list, without keeping mgmt_pending_lock held for the later dereference and removal. A concurrent MGMT_OP_CANCEL_PAIR_DEVICE request can remove and free the same pending command before the callback uses it. The reverse race is also possible when cancel_pair_device() gets a command from pending_find() and a callback removes it before the cancel path dereferences it. This can lead to a use-after-free and a second list_del(). Make the pairing lookup helpers transfer ownership of the pending command by removing it from hdev->mgmt_pending while holding mgmt_pending_lock. The callbacks and cancel path then complete the command and free it directly, so racing paths cannot find or free the same command again. Take a temporary hci_conn reference in cancel_pair_device() because the command completion drops the reference stored in the pending command. | ||||
| CVE-2026-74499 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_akai_output() snd_usbmidi_akai_output() computes its fill-loop bound buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1; as a signed int, so a small device-advertised bulk-OUT max_transfer makes buf_end negative. The loop guard then compares the u32 urb->transfer_buffer_length against that negative int: the usual arithmetic conversion turns buf_end into a large unsigned value, so the guard stays true and each iteration keeps appending SysEx framing and payload bytes past the end of the URB transfer buffer, which is only max_transfer bytes long. A USB device that advertises a tiny bulk-OUT endpoint can therefore trigger an attacker-length- and content-controlled heap out-of-bounds write when a process writes to the created /dev/snd/midiC*D* node. Return early when there is no room for even one SysEx, so the loop is never entered with a bound that would wrap. The loop is the last statement of the function, so bailing out is equivalent to it not running. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74490 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: avoid use-after-free in poll trace queue dumps TIPC socket tracepoints dump queue state through tipc_sk_dump(). Most queue-dump callsites already serialize that walk under the socket lock or sk->sk_lock.slock, but tipc_poll() calls trace_tipc_sk_poll(..., TIPC_DUMP_ALL, ...) without holding either lock. That lets the poll trace path reach tipc_list_dump() and backlog head/tail dumping while another context dequeues and frees an skb, leaving the trace helper dereferencing a stale queue entry. Stop the unlocked poll trace site from requesting queue dumps. Other queue dump trace callsites keep their existing output under the locking they already provide, while poll still emits the event itself without walking live queue members from an unlocked context. | ||||
| CVE-2026-74479 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: pktgen: fix proc entry use-after-free pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock. pktgen_remove_device() removes the same entry before _rem_dev_from_if_list() takes that lock. This allows the following interleaving: CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend) if_lock(t) proc_remove(pkt_dev->entry) proc_remove(pkt_dev->entry) pkt_dev->entry = proc_create_data(...) if_unlock(t) The kthread can pass the stale proc_dir_entry to proc_remove() after the rename path has freed it. A reproducer with a widened race window reports: BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80 Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67 Call Trace: proc_remove+0x78/0x80 pktgen_remove_device.isra.0+0x11c/0x4c0 pktgen_thread_worker+0x1214/0x6bc0 kthread+0x2c6/0x3b0 Allocated by task 95: __proc_create+0x204/0x790 proc_create_data+0x72/0xe0 pktgen_thread_write+0xd61/0x1510 Freed by task 28: kmem_cache_free+0xcb/0x3d0 proc_free_inode+0x5b/0x80 rcu_core+0x50a/0x1850 The buggy address belongs to the object at ffff8881478fea00 which belongs to the cache proc_dir_entry of size 192 Move proc_remove() into the if_lock-protected list removal helper. Keep it before list_del_rcu() to preserve the ordering required by add_device(). The rename path must then finish replacing the entry before removal, or it observes that the device is no longer on the list. | ||||
| CVE-2026-74476 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: veth: convert frag_list skbs before running XDP A frag_list skb can reach veth with data_len set but nr_frags zero. veth_convert_skb_to_xdp_buff() only converts skbs that are shared, locked, have frags[], or do not have enough headroom. It later uses skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and xdp_frags_size. That exposes frag_list data to XDP as if it were stored in frags[], but frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment metadata, walk an empty fragment entry, and crash in memcpy() from __xsk_rcv(). Route non-linear skbs through skb_pp_cow_data() before exposing them to XDP, and only advertise XDP frags when the resulting skb has frags[]. skb_copy_bits() already handles frag_list input, and skb_pp_cow_data() builds frags[] output with skb_add_rx_frag(), which is the representation XDP multi-buffer expects. | ||||
| CVE-2026-74474 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: use pskb_network_may_pull() for transmit path header pulls In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was being called to verify the availability of network layer headers (ARP, IPv6/ND, IP/IPv6 MDB keys). However, during transmit skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data rather than skb_network_offset(skb) + len, which can leave part of the network header in non-linear frags. Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly account for the MAC header offset. | ||||
| CVE-2026-74471 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Check return value of __register_event() in trace_module_add_events() trace_module_add_events() ignores the return value of __register_event() and unconditionally calls __add_event_to_tracers() for each event. If __register_event() fails (for example, if event_init() fails), the trace_event_call is not added to ftrace_events list, but __add_event_to_tracers() still creates a trace_event_file pointing to it. If module loading subsequently fails and module memory is freed, tracing state retains a stale trace_event_call pointer in trace_event_file, leading to a use-after-free when tracefs or tracing subsystem operations are later executed. Fix this by checking the return value of __register_event() and only calling __add_event_to_tracers() if event registration succeeded. | ||||
| CVE-2026-74460 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: validate CPC message lengths ems_usb_read_bulk_callback() walks CPC messages packed in one USB receive buffer. Check that each declared message fits in the URB payload. Also require the type-specific payload to cover the fields used by the CAN, state, error and overrun handlers. | ||||
| CVE-2026-74450 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix pptable use-after-free amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table after dropping adev->pm.mutex. The sysfs path then copies from that pointer. A concurrent pp_table write can replace and free the allocation during the copy, causing a use-after-free. Change the DPM interface to copy into caller-provided storage while the mutex is held. Keep the size-only query for attribute discovery without exposing the driver-owned pointer. (cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631) | ||||
| CVE-2026-19894 | 1 Itsourcecode | 1 Hospital Management System | 2026-08-15 | 6.3 Medium |
| A security flaw has been discovered in itsourcecode Hospital Management System 1.0. Affected is an unknown function of the file /viewmedicine.php. Performing a manipulation of the argument delid results in sql injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. | ||||
| CVE-2026-72487 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Check ROM header and data structure addr before accessing We meet a crash when running stress-ng on x86_64 machine: BUG: unable to handle page fault for address: ffa0000007f40000 RIP: 0010:pci_get_rom_size+0x52/0x220 Call Trace: <TASK> pci_map_rom+0x80/0x130 pci_read_rom+0x4b/0xe0 kernfs_file_read_iter+0x96/0x180 vfs_read+0x1b1/0x300 Our analysis reveals that the ROM space's start address is 0xffa0000007f30000, and size is 0x10000. Because of broken ROM space, before calling readl(pds), the pds's value is 0xffa0000007f3ffff, which is already pointed to the ROM space end, invoking readl() would read 4 bytes therefore cause an out-of-bounds access and trigger a crash. Fix this by adding image header and data structure checking. We also found another crash on arm64 machine: Unable to handle kernel paging request at virtual address ffff8000dd1393ff Mem abort info: ESR = 0x0000000096000021 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault The call trace is the same with x86_64, but the crash reason is that the data structure addr is not aligned with 4, and arm64 machine report "alignment fault". Fix this by adding alignment checking. [bhelgaas: shorten function names, wrap comments] | ||||
| CVE-2026-72490 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix stainfo check in rtw_aes_decrypt The null-pointer-guard was incorrect, returning _FAIL on valid pointer. Invert the guard, so it returns _FAIL on invalid pointer. | ||||
| CVE-2026-72493 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: serialize netif_running() check in enqueue_to_backlog() Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup(). The root cause is a race condition where packets can escape the backlog flushing during device unregistration (e.g., during netns exit). Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration") introduced a lockless netif_running() check in enqueue_to_backlog() to prevent queuing packets to an unregistering device. However, this creates a TOCTOU race window. A lockless transmitter (like veth_xmit) can pass the check before dev_close() clears IFF_UP. If the transmitter is then delayed, flush_all_backlogs() can run and finish before the transmitter grabs the backlog lock and queues the packet. The packet then escapes the flush and triggers UAF later when processed. Fix this by moving the netif_running() check inside the backlog lock. This serializes the check with the flush work (which also grabs the lock). We then either queue the packet before the flush runs (so it gets flushed), or check netif_running() after the flush/close completes (so it gets dropped). | ||||
| CVE-2026-72499 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free CQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write the toggle value to an already-freed page. Move free_page() after bnxt_qplib_destroy_cq. | ||||
| CVE-2026-72501 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Initialize dpi variable to zero dpi is initialized only for BNXT_RE_ALLOC_WC_PAGE, but copied for all the cases. So initialize the dpi to 0. | ||||
| CVE-2026-74257 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sockmap: Fix use-after-free in udp_bpf_recvmsg() syzbot reported use-after-free of struct sk_msg in sk_msg_recvmsg(). [0] sk_msg_recvmsg() peeks sk_msg from psock->ingress_msg under a lock, but its processing is lockless. Thus, sk_msg_recvmsg() must be serialised by callers, otherwise multiple threads could touch the same sk_msg. For example, TCP uses lock_sock(), and AF_UNIX uses unix_sk(sk)->iolock. Initially, udp_bpf_recvmsg() had used lock_sock(), but the cited commit removed it. Let's serialise sk_msg_recvmsg() with lock_sock() in udp_bpf_recvmsg(). Note that holding spin_lock_bh(&sk->sk_receive_queue.lock) is not an option due to copy_page_to_iter() in sk_msg_recvmsg(). [0]: BUG: KASAN: slab-use-after-free in sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428 Read of size 4 at addr ffff88814cdcf000 by task syz.0.24/6020 CPU: 1 UID: 0 PID: 6020 Comm: syz.0.24 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xba/0x230 mm/kasan/report.c:482 kasan_report+0x117/0x150 mm/kasan/report.c:595 sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428 udp_bpf_recvmsg+0x4bd/0xe00 net/ipv4/udp_bpf.c:84 inet_recvmsg+0x260/0x270 net/ipv4/af_inet.c:891 sock_recvmsg_nosec net/socket.c:1078 [inline] sock_recvmsg+0x1a8/0x270 net/socket.c:1100 ____sys_recvmsg+0x1e6/0x4a0 net/socket.c:2812 ___sys_recvmsg+0x215/0x590 net/socket.c:2854 do_recvmmsg+0x334/0x800 net/socket.c:2949 __sys_recvmmsg net/socket.c:3023 [inline] __do_sys_recvmmsg net/socket.c:3046 [inline] __se_sys_recvmmsg net/socket.c:3039 [inline] __x64_sys_recvmmsg+0x198/0x250 net/socket.c:3039 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fb319f9aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb31ad97028 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007fb31a216090 RCX: 00007fb319f9aeb9 RDX: 0000000000000001 RSI: 0000200000000400 RDI: 0000000000000004 RBP: 00007fb31a008c1f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000040000021 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fb31a216128 R14: 00007fb31a216090 R15: 00007ffe21dd0a98 </TASK> Allocated by task 6019: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __kmalloc_cache_noprof+0x3d1/0x6e0 mm/slub.c:5780 kmalloc_noprof include/linux/slab.h:957 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] alloc_sk_msg net/core/skmsg.c:510 [inline] sk_psock_skb_ingress_self+0x60/0x350 net/core/skmsg.c:612 sk_psock_verdict_apply net/core/skmsg.c:1038 [inline] sk_psock_verdict_recv+0x7d9/0x8d0 net/core/skmsg.c:1236 udp_read_skb+0x73e/0x7e0 net/ipv4/udp.c:2045 sk_psock_verdict_data_ready+0x12d/0x550 net/core/skmsg.c:1257 __udp_enqueue_schedule_skb+0xc54/0x10b0 net/ipv4/udp.c:1789 __udp_queue_rcv_skb net/ipv4/udp.c:2346 [inline] udp_queue_rcv_one_skb+0xac5/0x19c0 net/ipv4/udp.c:2475 __udp4_lib_mcast_deliver+0xc06/0xcf0 net/ipv4/udp.c:2585 __udp4_lib_rcv+0x10f6/0x2620 net/ipv4/udp.c:2724 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x336/0x3c0 include/linux/netfilter.h:318 dst_input include/net/dst.h:474 [inline] ip_sublist_rcv_finish+0x221/0x2a0 net/ipv4/ip_input.c:584 ip_list_rcv_finish net/ipv4/ip_inp ---truncated--- | ||||