Export limit exceeded: 400668 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (400668 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93264 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix PBL chunk length computation On register MR, when creating the PBL, if it's an indirect PBL we create a chunk list to hold the PBL pages pointers. Each chunk is 4KB in size and can hold 510 addresses (EFA_PTRS_PER_CHUNK) and has a 12-byte control buffer at the end of it holding the next chunk's pointer and its length. If the PBL number of pages is a multiple of EFA_PTRS_PER_CHUNK, the calculated last chunk length is wrongly computed as 0, even though that chunk is fully populated with 510 real page pointers. This wrong length is used both to DMA map the chunk and is propagated to the device, causing the device to see the chunk as empty and reject the memory registration. Fix the calculation so it will be performed only if the number of pages isn't a multiple of EFA_PTRS_PER_CHUNK, if it is, its already handled in the above loop correctly. Also prevent out-of-bounds reach in the chunks array in such scenario. | ||||
| CVE-2026-93274 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: bcm2835: Don't remove an unregistered GPIO chip If the devm_pinctrl_register() function fails, bcm2835_pinctrl_probe() calls gpiochip_remove() before gpiochip_add_data() has registered the GPIO chip. This means that upon failure the gpio_chip.gpiodev is NULL resulting in a null pointer dereference inside the gpiochip_remove() function. Remove the unnecessary function call to gpiochip_remove(). No GPIO cleanup is required because the GPIO chip has not yet been registered. Without this change there is potential for a kernel panic upon registration failure | ||||
| CVE-2026-12037 | 2 Gabe Livan, Wordpress | 2 Asset Cleanup: Page Speed Booster, Wordpress | 2026-09-25 | 5.5 Medium |
| The Asset CleanUp: Page Speed Booster plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 1.4.0.5 via the 'page_url' parameter. This makes it possible for authenticated attackers, with administrator-level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. This vulnerability is only reachable when the plugin's dom_get_type setting has been configured to 'wp_remote_post' by an administrator. | ||||
| CVE-2026-98090 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: restore active device pointers after failed sprout btrfs_init_new_device() switches latest_dev and possibly s_bdev from the seed device to the new sprout device before creating the first writable chunks. If chunk creation or the subsequent sprout setup fails, the error path releases the new device without switching those pointers back. btrfs_show_devname() can then dereference the freed latest_dev and crash. Restore the active device pointers to the latest seed device before removing and releasing the failed sprout device. | ||||
| CVE-2026-97942 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Exclude text poking against change_page_attr() From time to time, the following BUG can be observed in the x86 alternatives patching code [0]: > kernel BUG at arch/x86/kernel/alternative.c:2576! > Oops: invalid opcode: 0000 [#1] SMP NOPTI > CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022 > RIP: 0010:__text_poke+0x2aa/0x450 > Call Trace: > <TASK> > smp_text_poke_batch_finish+0x2a7/0x320 > __static_call_transform+0xb7/0x220 > arch_static_call_transform+0x5b/0xb0 > __static_call_init+0xe9/0x270 > static_call_module_notify+0x11f/0x150 > notifier_call_chain+0x61/0xe0 > blocking_notifier_call_chain_robust+0x63/0xc0 > load_module+0x1c92/0x20c0 > init_module_from_file+0xd8/0x140 > idempotent_init_module+0x100/0x2f0 > __x64_sys_finit_module+0x71/0xe0 > do_syscall_64+0xe1/0x610 > entry_SYSCALL_64_after_hwframe+0x76/0x7e which matches the following BUG_ON() in alternative.c: /* * If something went wrong, crash and burn since recovery paths are not * implemented. */ BUG_ON(!pages[0] || (cross_page_boundary && !pages[1])); This can happen if vmalloc_to_page() fails, for any reason. Such can happen if text poking races with CPA, which can possibly result in the collapsing of page tables (or breaking of PMD hugepages). It is not a problem for most users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc range, and can call set_memory_*() in parallel on it. This can happen to race against __text_poke and cause havoc in vmalloc_to_page(). Fix it by excluding against CPA using the init_mm mmap read lock. [ dhansen: Fix up SoB ordering. The actual code flow here was: Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain now. I *believe* Mike simply picked up Lorenzo's update to Pedro's post from the Link ] | ||||
| CVE-2026-97925 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tick/broadcast: Plug clockevents replacement race 朱恺乾 reported and decoded the following race condition when a broadcast device is replaced: CPUA CPUB __tick_broadcast_oneshot_control() bc = tick_broadcast_device.evtdev; tick_install_broadcast_device(dev) clockevents_exchange_device(cur, dev) shutdown(cur); detach(cur); cur->handler = noop; tick_broadcast_device.evtdev = dev; tick_broadcast_set_event(bc, next_event); <- FAIL: arms a detached device. If the original broadcast device has a restricted interrupt affinity mask and the last CPU in that mask goes offline then the BUG() in tick_cleanup_dead_cpu() triggers because the clockevent device is not in detached state. The reason for this is that tick_install_broadcast_device() is not serialized vs. tick broadcast operations. The obvious cure is to serialize tick_install_broadcast_device() with tick_broadcast_lock against a concurrent tick broadcast operation. That requires to split clockevents_exchange_device() into two parts, one which does the exchange, shutdown and detach operation and the other which drops the module reference count. This is required because the module reference cannot be dropped while holding tick_broadcast_lock. Let clockevents_exchange_device() do both operations as before, but let the broadcast device code take the two step approach and do the device exchange under tick_broadcast_lock and drop the module reference count after releasing it. | ||||
| CVE-2026-97919 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take the reference before publishing the named histogram trigger event_hist_trigger_named_init() puts the trigger on the global named_triggers list and only then takes the reference on the trigger it shares its histogram with: data->ref++; save_named_trigger(data->named_data->name, data); ret = event_hist_trigger_init(data->named_data); if (ret < 0) { kfree(data->cmd_ops); data->cmd_ops = &trigger_hist_cmd; } return ret; event_hist_trigger_init() fails when alloc_hist_pad() cannot allocate, and nothing takes the trigger back off the list on the way out. event_hist_trigger_parse() frees it, and the next lookup by name reads the freed object: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff888009346860 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 67: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Do the reference first and publish once it has succeeded, so that nothing which can fail runs after the trigger becomes findable. | ||||
| CVE-2026-97917 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr Add a size parameter to ivpu_to_cpu_addr() and validate that the whole [vpu_addr, vpu_addr + size) range stays within the BO. | ||||
| CVE-2026-97601 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: 6lowpan: fix NULL dereference in lowpan_newlink TUNSETLINK allows a TUN device to change its link-layer type to ARPHRD_IEEE802154 without initializing ieee802154_ptr. lowpan_newlink() checks only the device type before dereferencing the pointer, so an RTM_NEWLINK request can trigger a NULL pointer dereference. Reject devices without ieee802154_ptr along with devices of the wrong type. | ||||
| CVE-2026-97863 | 1 Misp | 1 Misp-modules | 2026-09-25 | N/A |
| The cisco_firesight_manager_ACL_rule_export module in misp-modules generates a shell script (.sh) that authenticates to and calls the Cisco fireSIGHT Manager API. The module interpolates configuration values (IP address, login, password, domain ID, policy ID) and MISP attribute values (destination IPs, URLs, event info comments) directly into single-quoted shell string assignments without any escaping or sanitization. Because the values are placed inside single-quoted shell strings, any value containing a single-quote character (e.g., a crafted ip-dst or url attribute value submitted to MISP) breaks out of the quoting context, allowing an attacker to inject arbitrary shell commands into the exported script. A security analyst who subsequently executes the generated .sh file unmodified would run the injected commands with their own privileges, potentially exposing fireSIGHT Manager credentials, modifying ACL rules, or compromising the analyst workstation. Additionally, the module contained a secondary defect where the variable 'config' was only assigned inside a conditional block but referenced unconditionally afterward, causing a NameError (denial of service) when the request payload lacked a 'config' key. The vulnerability requires the attacker to have the ability to submit MISP events or attributes containing a single-quote character and the victim to execute the exported script. No authentication bypass is required beyond standard MISP event-submission privileges. | ||||
| CVE-2026-39708 | 2 Uicore, Wordpress | 2 Uicore Elements, Wordpress | 2026-09-25 | 6.5 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in UiCore UiCore Elements uicore-elements allows Stored XSS.This issue affects UiCore Elements: from n/a through 1.3.17. | ||||
| CVE-2025-64289 | 3 Premmerce, Woocommerce, Wordpress | 4 Premmerce, Product Search For Woocommerce, Woocommerce and 1 more | 2026-09-25 | 5.9 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Premmerce Premmerce Product Search for WooCommerce premmerce-search allows Stored XSS.This issue affects Premmerce Product Search for WooCommerce: from n/a through 2.2.7. | ||||
| CVE-2026-97417 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack() The timestamp-only fast path dereferences the option stream as *(__be32 *)ptr, which assumes 4-byte alignment that the TCP option stream does not guarantee. Use get_unaligned_be32() instead, which reads the value safely and already returns host byte order, so the htonl() on the comparison constant can be dropped. This matches the existing get_unaligned_be32() use later in the same function. | ||||
| CVE-2026-97438 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate index entry key bounds [BUG] A malformed NTFS directory index entry can advertise a key_size larger than the bytes actually present in its NTFS_DE payload. Directory lookup then passes that malformed key to cmp_fnames(), which can read past the end of the kmalloc'ed index buffer. BUG: KASAN: slab-out-of-bounds in fname_full_size fs/ntfs3/ntfs.h:590 [inline] BUG: KASAN: slab-out-of-bounds in cmp_fnames+0x1ea/0x230 fs/ntfs3/index.c:46 Read of size 1 at addr ffff88801c313018 by task syz.6.3365/9279 Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xd1/0x650 mm/kasan/report.c:482 kasan_report+0xfb/0x140 mm/kasan/report.c:595 __asan_report_load1_noabort+0x14/0x30 mm/kasan/report_generic.c:378 fname_full_size fs/ntfs3/ntfs.h:590 [inline] cmp_fnames+0x1ea/0x230 fs/ntfs3/index.c:46 hdr_find_e.isra.0+0x3ed/0x670 fs/ntfs3/index.c:762 indx_find+0x4b5/0x900 fs/ntfs3/index.c:1186 dir_search_u+0x2c0/0x460 fs/ntfs3/dir.c:254 ntfs_lookup+0x1cc/0x2a0 fs/ntfs3/namei.c:85 __lookup_slow+0x241/0x450 fs/namei.c:1816 lookup_slow fs/namei.c:1833 [inline] walk_component+0x31c/0x570 fs/namei.c:2151 link_path_walk+0x592/0xd60 fs/namei.c:2519 path_lookupat+0x138/0x660 fs/namei.c:2675 filename_lookup+0x1f3/0x560 fs/namei.c:2705 filename_setxattr+0xad/0x1c0 fs/xattr.c:660 path_setxattrat+0x1d8/0x280 fs/xattr.c:713 __do_sys_lsetxattr fs/xattr.c:754 [inline] __se_sys_lsetxattr fs/xattr.c:750 [inline] __x64_sys_lsetxattr+0xd0/0x150 fs/xattr.c:750 ... Allocated by task 9279: kasan_save_stack+0x39/0x70 mm/kasan/common.c:56 kasan_save_track+0x14/0x40 mm/kasan/common.c:77 kasan_save_alloc_info+0x37/0x60 mm/kasan/generic.c:573 poison_kmalloc_redzone mm/kasan/common.c:400 [inline] __kasan_kmalloc+0xc3/0xd0 mm/kasan/common.c:417 kasan_kmalloc include/linux/kasan.h:262 [inline] __do_kmalloc_node mm/slub.c:5650 [inline] __kmalloc_noprof+0x2bd/0x900 mm/slub.c:5662 kmalloc_noprof include/linux/slab.h:961 [inline] indx_read+0x41d/0xad0 fs/ntfs3/index.c:1059 indx_find+0x447/0x900 fs/ntfs3/index.c:1179 dir_search_u+0x2c0/0x460 fs/ntfs3/dir.c:254 ntfs_lookup+0x1cc/0x2a0 fs/ntfs3/namei.c:85 __lookup_slow+0x241/0x450 fs/namei.c:1816 lookup_slow fs/namei.c:1833 [inline] walk_component+0x31c/0x570 fs/namei.c:2151 link_path_walk+0x592/0xd60 fs/namei.c:2519 path_lookupat+0x138/0x660 fs/namei.c:2675 filename_lookup+0x1f3/0x560 fs/namei.c:2705 filename_setxattr+0xad/0x1c0 fs/xattr.c:660 path_setxattrat+0x1d8/0x280 fs/xattr.c:713 __do_sys_lsetxattr fs/xattr.c:754 [inline] __se_sys_lsetxattr fs/xattr.c:750 [inline] __x64_sys_lsetxattr+0xd0/0x150 fs/xattr.c:750 ... [CAUSE] The index-header validators only validated INDEX_HDR-level geometry. They did not walk each NTFS_DE to verify entry alignment, subnode layout, or that key_size fit inside the entry payload. They also allowed a last sentinel entry to carry a non-zero key_size. [FIX] Walk every NTFS_DE in ntfs3's index-header validators and reject entries with invalid layout, mismatched subnode state, oversized key_size, or non-zero sentinel keys before lookup or log replay can consume them. | ||||
| CVE-2026-97508 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Set tb->root_switch to NULL when domain is stopped Similarly what we do with the firmware connection manager. This makes tb_xdp_handle_request() return error to the remote host. However, we need to make sure we keep the uuid alive so that we can reply until the whole domain is released. | ||||
| CVE-2026-92746 | 2 Jegstudio, Wordpress | 2 Gutenverse – Wordpress Blocks, Page Builder & Site Editor, Wordpress | 2026-09-25 | 6.4 Medium |
| The Gutenverse – WordPress Blocks, Page Builder & Site Editor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Post Comment Block 'suffixMain' Attribute in all versions up to, and including, 4.0.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. WordPress core wp_kses_post sanitization does not mitigate this vulnerability because the payload is stored inside a Gutenberg block delimiter comment rather than as a raw HTML tag, and is only rendered as exploitable HTML at the PHP render stage. | ||||
| CVE-2026-81792 | 2 Multivendorx, Wordpress | 2 Product Catalog Enquiry For Woocommerce By Multivendorx, Wordpress | 2026-09-25 | 6.5 Medium |
| Incorrect Privilege Assignment vulnerability in MultiVendorX Product Catalog Enquiry for WooCommerce by MultiVendorX woocommerce-catalog-enquiry allows Privilege Escalation.This issue affects Product Catalog Enquiry for WooCommerce by MultiVendorX: from n/a through 6.1.5. | ||||
| CVE-2026-93793 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: validate TX_CMD response layout TX_CMD parsing uses frame_count to walk status entries and then read the trailing SCD SSN. Make the minimum-length check follow that exact runtime layout calculation before parsing the payload. For new TX API, reject TX_CMD responses with frame_count != 1 and warn/return in the aggregation handler to document that aggregated accounting is expected via BA notifications. | ||||
| CVE-2026-93810 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix double fput Fix a double fput() in error handling in cachefiles_create_tmpfile(). | ||||
| CVE-2026-97445 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Enhance buffer validation in acpi_ut_walk_aml_resources() Enhance buffer validation in acpi_ut_walk_aml_resources() to prevent buffer overflows. | ||||