Export limit exceeded: 372792 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (372792 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64360 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: zero-initialize buffer in hfs_bnode_read hfs_bnode_read() can return early without writing to the output buffer when is_bnode_offset_valid() fails or when check_and_correct_requested_ length() corrects the length to zero. Callers such as hfs_bnode_read_ u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the result unconditionally, leading to KMSAN uninit-value reports. Rather than initializing at each individual call site, zero the buffer at the start of hfs_bnode_read() before any validation checks. This ensures all callers in both hfs and hfsplus get a deterministic zero value regardless of which early-return path is taken. | ||||
| CVE-2026-64372 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: pcc: fix use-after-free and double free in _OSC evaluation pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the two-phase _OSC negotiation. Between the two calls it freed output.pointer but left output.length unchanged. Since acpi_evaluate_object() treats a non-zero length with a non-NULL pointer as an existing buffer to write into, the second call wrote into freed memory (use-after-free). The subsequent kfree(output.pointer) at out_free then freed the same pointer a second time (double free). Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER after freeing the first result, so ACPICA allocates a fresh buffer for each phase independently. | ||||
| CVE-2026-64374 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT RT migration is done aggressively. When a CPU schedules out a high priority RT task for a lower priority task, it will look to see if there's any RT tasks that are waiting to run on another CPU that is of higher priority than the task this CPU is about to run. If it finds one, it will pull that task over to the CPU and allow it to run there instead. Normally, this pulling is done by looking at the RT overloaded mask (rto) which contains all the CPUs in the scheduler domain with RT tasks that are waiting to run due to a higher priority RT task currently running on their CPU. The CPU that is about to schedule a lower priority task will grab the rq lock of the overloaded CPU and move the RT task from that CPU's runqueue to the local one and schedule the higher priority RT task. This caused issues when a lot of CPUs would schedule a lower priority task at the same time. They would all try to grab the same runqueue lock of the CPU with the overloaded RT tasks. Only the first CPU that got in will get that task. All the others would wait until they got the runqueue lock and see there's nothing to pull and do nothing. On systems with lots of CPUs, this caused a large latency (up to 500us) which is beyond what PREEMPT_RT is to allow. The solution to that was to create an RT_PUSH_IPI logic. When any CPU wanted to pull a task, instead of grabbing the runqueue lock of the overloaded CPU, it would start by sending an IPI to the overloaded CPU, and that IPI handler would have the CPU with the waiting RT task do a push instead. Then that handler would send an IPI to the next CPU with overloaded RT tasks, and so on. Note, after the first CPU starts this process, if another CPU wanted to do a pull, it would see that the process has already begun and would only increment a counter to have the IPIs continue again. The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded context on PREEMPT_RT but they can run in an interrupt context in non-RT. If an IPI lands on a CPU that has just woken up multiple RT tasks and the current CPU is running a non RT or a low priority RT task, instead of doing a push, it would simply do a schedule on that CPU. But if a softirq was also executing on this CPU, the schedule would need to wait until the softirq finished. Until then, the CPU would still be considered overloaded as there are RT tasks still waiting to run on it. A live lock occurred on a workload that was doing heavy networking traffic on a large machine where the softirqs would run 500us out of 750us. And it would also be waking up RT tasks, causing the RT pull logic to be constantly executed. When a softirq triggered on a CPU with RT tasks queued but not running yet, and the other CPUs would see this CPU as being overloaded, they would send an IPI over to it. The CPU would notice that the waiting RT tasks are of higher priority than the currently running task and simply schedule that CPU instead. But because the softirq was executing, before it could schedule, it would receive another IPI to do the same. The amount of IPIs would slow down the currently running softirq so much that before it could return back to task context, it would execute another softirq never allowing the CPU to schedule. This live locked that CPU. As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if PREEMPT_RT is not enabled. | ||||
| CVE-2026-67292 | 1 Freerdp | 1 Freerdp | 2026-08-03 | 6.5 Medium |
| FreeRDP before 3.29.0 contains a buffer over-disclosure vulnerability in the gateway WebSocket transport (libfreerdp/core/gateway/websocket.c). The client's Pong reply reuses a fixed 1024-byte response stream whose length is not sealed to the actual received Ping payload, so a malicious gateway/WebSocket peer sending a non-empty Ping control frame causes the client to reply with an overlong Pong that discloses bytes beyond the received payload (the peer receives the masking key and can unmask the reply). A zero-length Ping reaches an assertion and terminates the client (denial of service). | ||||
| CVE-2026-17580 | 2 Wordpress, Wplakeorg | 2 Wordpress, Advanced Views – Display Custom Fields (acf, Pods, Metabox), Posts, Cpt And Woo Products Anywhere In Gutenberg, Elementor, Divi, Beaver… | 2026-08-03 | 6.5 Medium |
| The Advanced Views – Display Custom Fields (ACF, Pods, MetaBox), Posts, CPT and Woo Products anywhere in Gutenberg, Elementor, Divi, Beaver… plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.9.1 via the register_rest_routes. This makes it possible for authenticated attackers, with subscriber-level access and above, to extract sensitive admin-authored editor content — including template markup, CSS code, JavaScript code, and PHP controller variables — for any Layout or Post Selection post on the site. | ||||
| CVE-2026-69185 | 2026-08-03 | 7.5 High | ||
| Socket.IO enables bidirectional and low-latency communication for every platform. Prior to 4.2.7, 3.4.5, and 3.3.6, a specially crafted Socket.IO packet can make the server wait for a large number of binary attachments and buffer them, which can be exploited to make the server run out of memory. This vulnerability is fixed in 4.2.7, 3.4.5, and 3.3.6. | ||||
| CVE-2026-20477 | 1 Mediatek, Inc. | 1 Mediatek Chipset | 2026-08-03 | 6 Medium |
| In display, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11009963; Issue ID: MSV-7658. | ||||
| CVE-2026-15414 | 2 Wordpress, Wpswings | 2 Wordpress, Subscriptions For Woocommerce | 2026-08-03 | 8.8 High |
| The Subscriptions for WooCommerce plugin for WordPress is vulnerable to Privilege Escalation in versions up to, and including, 2.0.0. This is due to the `save_meta_boxes()` function persisting the `_wps_plan_user_role` membership plan meta from `$_POST` without an allowlist that excludes privileged roles — the only validations applied, `sanitize_key()` and `wp_roles()->is_role()`, both accept `'administrator'` as a valid value, and the UI's `disabled` attribute on the role dropdown is a client-side-only control trivially bypassed via DevTools or a direct POST request; additionally, because the `wps_membership_plan` custom post type is registered with `capability_type => 'post'`, any user who can edit posts satisfies the `current_user_can('edit_post', $post_id)` guard in `save_meta_boxes()`. This makes it possible for authenticated attackers, with Contributor-level access and above, to escalate their privileges to Administrator by storing `'administrator'` as the role granted on membership acquisition, which the Pro companion plugin then applies via `add_role()` during membership lifecycle events. Successful exploitation requires the Subscriptions for WooCommerce Pro companion plugin to be active, as it is the component that reads the stored `_wps_plan_user_role` meta via `get_post_meta()` and calls `add_role()` to apply the role during membership lifecycle events. | ||||
| CVE-2026-18655 | 1 Aws | 1 Amazon-mq-mcp-server | 2026-08-03 | 6.5 Medium |
| Improper restriction of intended endpoints in the RabbitMQ broker connection tools of the Amazon MQ MCP Server (awslabs.amazon-mq-mcp-server) before 2.0.24 may allow a remote unauthenticated actor (via prompt injection) to obtain Amazon MQ for RabbitMQ broker credentials or OAuth access tokens sent to a crafted endpoint controlled through a broker hostname introduced in the MCP client context. To remediate this issue, users should upgrade to version 2.0.24. | ||||
| CVE-2026-20475 | 1 Mediatek, Inc. | 1 Mediatek Chipset | 2026-08-03 | 6 Medium |
| In display, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11004276; Issue ID: MSV-7748. | ||||
| CVE-2026-67599 | 2026-08-03 | 7.2 High | ||
| ClearOS 7.9 contains an OS command injection vulnerability in the Log Viewer component that allows authenticated attackers to execute arbitrary commands by submitting unsanitized input through the filter parameter, which is interpolated directly into a shell command in File.php. Attackers can inject command substitution payloads into the filter parameter to execute arbitrary commands as the webconfig user, and due to extensive NOPASSWD sudo privileges granted to that user by default, immediately escalate to root. | ||||
| CVE-2026-48031 | 2026-08-03 | 9.1 Critical | ||
| go-base is a Go RESTful API Boilerplate template with JWT Authentication, backed by PostgreSQL. In versions prior to 2026-05-18, the JWT signing secret is hardcoded to the known string "random", letting any attacker who reads the public repository forge tokens for arbitrary users, including admin roles, and completely bypass authentication on all protected endpoints. This value is set in two places: the dev.env template (line 10) and a programmatic fallback in cmd/serve.go (line 35), so the application uses it even when no .env file is present. The original mitigation in auth/jwt/tokenauth.go (lines 22 to 25) only caught the exact string "random", letting other weak secrets through, and replaced it with an in-memory key that was not persisted, invalidating all tokens on every restart and effectively causing a denial-of-service. This issue has been fixed in version 2026-05-18. | ||||
| CVE-2026-20472 | 1 Mediatek, Inc. | 1 Mediatek Chipset | 2026-08-03 | 4.4 Medium |
| In TFA, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10991467; Issue ID: MSV-7764. | ||||
| CVE-2026-66296 | 1 Lud | 1 Oaskit | 2026-08-03 | N/A |
| Improper Neutralization of Input During Web Page Generation (XSS) vulnerability in lud oaskit allows reflected cross-site scripting via the default HTML error handler. Oaskit.ErrorHandler.Default.format_reason/4 and Oaskit.ErrorHandler.Default.reason_to_html/1 in lib/oaskit/error_handler/default.ex render request-validation failures as an HTML page whenever the request's Accept header contains html, interpolating request-controlled strings into that page without HTML escaping. The unescaped values are object keys taken from a request body or from an object or deepObject query parameter, which appear in the JSON Schema error's instance path when a schema rejects them (for example under additionalProperties: false), and the raw Content-Type header, reflected in unsupported-media-type errors when it fails to parse. Because browsers send Accept: text/html on ordinary top-level navigation, a crafted GET link is sufficient to trigger the error page; no form submission, custom Content-Type, or attacker-controlled script on the victim's side is required. A payload such as filter[</code></h2><script>alert(document.domain)</script>]=x terminates the enclosing markup and the injected script executes in the origin of the application using oaskit, giving it access to that origin's cookies, session, and same-origin responses. Both HTML error rendering and the vulnerable handler are enabled by default: Oaskit.Plugs.ValidateRequest defaults :html_errors to true and :error_handler to Oaskit.ErrorHandler.Default, so applications following the documented usage are affected without any opt-in. This issue affects oaskit: from 0.1.0 before 0.14.1. | ||||
| CVE-2026-20464 | 1 Mediatek, Inc. | 1 Mediatek Chipset | 2026-08-03 | 6.5 Medium |
| In hevc decoder, there is a possible out of bounds write due to an integer overflow. This could lead to remote escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11104718; Issue ID: MSV-8297. | ||||
| CVE-2026-20465 | 1 Mediatek, Inc. | 1 Mediatek Chipset | 2026-08-03 | 8.1 High |
| In wlan AP driver, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00489200; Issue ID: MSV-7834. | ||||
| CVE-2026-20480 | 1 Mediatek, Inc. | 1 Mediatek Chipset | 2026-08-03 | 5.5 Medium |
| In Audio HAL, there is a possible out of bounds write due to a heap buffer overflow. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS10960023 (Note: For MT6880, MT6890, MT6980D, MT6988, MT6990) / AUTO00851189 (Note: For MT2735, MT3737); Issue ID: MSV-7586. | ||||
| CVE-2026-17571 | 2 Wordpress, Wpmanageninja | 2 Wordpress, Fluent Forms – Customizable Contact Forms, Survey, Quiz, & Conversational Form Builder | 2026-08-03 | 6.1 Medium |
| The Fluent Forms – Customizable Contact Forms, Survey, Quiz, & Conversational Form Builder plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via 'param' in all versions up to, and including, 6.2.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. | ||||
| CVE-2026-67598 | 2026-08-03 | 7.4 High | ||
| Emlog Pro through 2.6.23 contains a disabled TLS certificate validation vulnerability in include/service/ai.php that allows network-adjacent attackers to intercept outbound HTTPS requests to configured LLM providers by presenting arbitrary TLS certificates, as CURLOPT_SSL_VERIFYPEER and CURLOPT_SSL_VERIFYHOST are unconditionally disabled across sendStream(), sendImageRequest(), send(), and fetchSearchHtml() with no option to re-enable verification. Attackers can perform man-in-the-middle interception to extract Authorization Bearer API keys from every AI request and inject crafted AI responses that may be acted upon by the tool-call execution pipeline, including the query_database and update_config tool handlers. | ||||
| CVE-2026-20488 | 1 Mediatek, Inc. | 1 Mediatek Chipset | 2026-08-03 | 4.4 Medium |
| In display, there is a possible information disclosure due to a missing bounds check. This could lead to local information disclosure if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11004276; Issue ID: MSV-7757. | ||||