Export limit exceeded: 381901 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381901 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74713 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vhost_iotlb: bound map allocation in add_range vhost_iotlb_add_range_ctx() only retires an old entry when the table has a non-zero limit, has exactly reached that limit and has VHOST_IOTLB_FLAG_RETIRE set. Non-retiring tables can keep allocating entries after reaching their configured limit. Existing vhost devices allocate their IOTLB with max_iotlb_entries from vhost.c, which defaults to 2048 and is tunable by module parameter. Use the caller-provided limit at the allocation point instead of adding a separate default in the common IOTLB helper, and reject non-positive values in vhost paths that can report an error. Other vhost IOTLB users should not create zero-limit tables when entries can be populated from userspace or guest-controlled requests. Add caller-side max_iotlb_entries parameters for mlx5 vDPA, VDUSE and vhost-vDPA. Reject non-positive VDUSE and vhost-vDPA values, and require at least two entries for vdpa_sim and mlx5 vDPA paths that install full-range mappings, since those mappings are split into two IOTLB entries. Handle full-range mappings in the common helper by checking that the IOTLB can hold both split entries before inserting the first half. This avoids returning an error after leaving a half mapping behind. When the table is full, keep the existing retire behavior for retiring tables and return -ENOSPC for non-retiring tables. Reuse the retired map node instead of freeing it and allocating a replacement, so a stream of IOTLB updates cannot keep forcing GFP_ATOMIC allocations after the table has reached its limit. If a zero-limit IOTLB still reaches the common helper, treat it as a configuration error and return -EINVAL. I found this bug myself, though the patch was written with AI assistance. | ||||
| CVE-2026-74639 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: re-anchor capture URBs on resubmission capture_urb_complete() resubmits each capture URB without anchoring it: usb_get_urb(urb); ret = usb_submit_urb(urb, GFP_ATOMIC); Anchoring is a property of a submission, not of the URB. The giveback path calls usb_unanchor_urb() before urb->complete(), so an URB resubmitted from its own completion handler is off the anchor. The capture URBs are anchored once, at stream start, so from the first completion onward tascam->capture_anchor is empty. tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor) to reap the capture URBs before anything is freed. With the anchor empty those calls return immediately and the URBs stay queued on the host controller. tascam_free_urbs() then returns the capture transfer buffers with usb_free_coherent(), and snd_card_free() releases the snd_card allocation that embeds tascam (card->private_data). The controller completes the queued URBs afterwards, writing device-supplied data into the freed transfer buffer, and capture_urb_complete() dereferences the freed driver object. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in dummy_timer Write of size 512 at addr ffff000015b62000 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 64: usb_alloc_coherent tascam_alloc_urbs tascam_probe Freed by task 170: usb_free_coherent tascam_free_urbs tascam_disconnect usb_unbind_interface BUG: KASAN: slab-use-after-free in capture_urb_complete Read of size 4 at addr ffff0000170ee878 Freed by task 170: release_card_device snd_card_free tascam_disconnect Restore the usb_anchor_urb() between the reference count bump and the resubmission. That also makes the handler's usb_unanchor_urb() failure arm meaningful again and restores usb_kill_anchored_urbs() as a barrier on the disconnect, suspend and stop-work paths. The anchoring was removed on the premise that the URB is already anchored from the initial submission, which does not hold once the first giveback has run. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74640 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: FCP: fix OOB write in fcp_meter_ctl_get() fcp_ioctl_set_meter_map() bounds the user-supplied Level Meter map size by the driver's own limit of 255 if (map.map_size < 1 || map.map_size > 255 || map.meter_slots < 1 || map.meter_slots > 255) return -EINVAL; and passes it to fcp_add_new_ctl() as the control's channel count, where it is stored as elem->channels. Every control read writes into struct snd_ctl_elem_value, whose integer array is declared long value[128], so the limit is 128, not 255. fcp_meter_ctl_get() stores one 64-bit word per channel into that array with no bound of its own: for (i = 0; i < elem->channels; i++) { int idx = private->meter_level_map[i]; int value = idx < 0 ? 0 : le32_to_cpu(resp[idx]); ucontrol->value.integer.value[i] = value; } snd_ctl_elem_read_user() serves that object from memdup_user(_control, sizeof(*control)), 1224 bytes on LP64 out of kmalloc-2048. offsetof(struct snd_ctl_elem_value, value) is 72, so element i is written at byte 72 + 8 * i and element 144 already lands past the allocation. At map_size 255 the last store ends at byte 2112, 888 bytes past the object and 64 bytes into the adjacent slab object. The stored words come from the device and meter_level_map[] selects which word lands in which slot, so extent and contents are both controlled. The core does not catch this. snd_ctl_check_elem_info() is reached only from __snd_ctl_elem_info(), which snd_ctl_elem_read() calls under CONFIG_SND_CTL_DEBUG; without that option snd_ctl_skip_validation() is a compile-time true. __snd_ctl_add_replace() validates kcontrol->count and never inspects elem->channels. Installing an oversized map needs CAP_SYS_RAWIO, but the control outlives the hwdep descriptor that created it, so the out-of-bounds stores are issued by any process able to read controls on /dev/snd/controlC0. KASAN on 7.2.0-rc5 (arm64), triggered by an unprivileged control read: BUG: KASAN: slab-out-of-bounds in fcp_meter_ctl_get Write of size 8 at addr ffff000017af04c8 by task fcp_trigger/185 __asan_store8 fcp_meter_ctl_get snd_ctl_elem_read snd_ctl_ioctl Allocated by task 185: memdup_user snd_ctl_ioctl The buggy address is located 0 bytes to the right of allocated 1224-byte region [ffff000017af0000, ffff000017af04c8) Bound the map size by the ABI limit rather than by 255, and bound the store loop at the sink so it cannot run past the value array whatever elem->channels holds. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74642 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb: Fix UAF at delayed release of MIDI2 EPs The recent fix for UAF in ump_to_endpoint() caused another UAF because it tries to dereference the UMP endpoint object, but this might be executed at a delayed context where the endpoint has been already released. Add private_free to clear the associated data for avoiding the further dereference for delayed releases. | ||||
| CVE-2026-74647 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Remove buffer from list prior to unmap operation fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is getting removed from the list after it is unmapped from DSP. This can create potential race conditions if multiple threads invoke unmap concurrently, where one thread may remove the entry from the list while another thread's unmap operation is still ongoing. Fix this by removing the buffer entry from the list before calling the unmap operation. If the unmap fails, the entry is re-added to the list so that userspace can retry the unmap, or alternatively, the buffer will be cleaned up during device release when the DSP process is torn down and all DSP-side mappings are freed along with remaining buffers in the list. | ||||
| CVE-2026-74649 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix missing shared-key auth challenge length check The WEP shared-key authentication handler uses the challenge-text element's attacker-controlled length without checking it against the fixed 128-byte chg_txt buffer. In OnAuthClient() the length from rtw_get_ie() - up to 255 - is used to perform memcpy() into the 128-byte pmlmeinfo->chg_txt, so a malicious AP sending a malformed WLAN_EID_CHALLENGE element can overflow/underfill chg_txt by up to 127 bytes. It is reachable over the air, before association, during shared-key authentication. In the case of an overflow, the driver can write out of bounds. In the case of an underfill, the driver can echo stale buffer memory. The challenge text is defined to be exactly 128 octets, which is already provided as the WLAN_AUTH_CHALLENGE_LEN define; require the element to be exactly that length before use. | ||||
| CVE-2026-74656 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: fix use-after-free in fib_nhc_update_mtu() fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but RTNL does not serialize this walk with PMTU exception updates. The walk uses rcu_dereference_protected() with a constant true condition without holding fnhe_lock. The following interleaving can therefore occur: CPU 0 CPU 1 fib_nhc_update_mtu() update_or_create_fnhe() load fnhe spin_lock_bh(&fnhe_lock) fnhe_remove_oldest() unlink fnhe kfree_rcu(fnhe, rcu) <quiescent state> access fnhe after grace period KASAN reported: BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410 Read of size 8 at addr ffff888107d49000 by task poc/90 Call Trace: fib_nhc_update_mtu+0x3df/0x410 fib_sync_mtu+0x7a/0xd0 fib_netdev_event+0x229/0x3f0 netif_set_mtu_ext+0x33a/0x570 dev_set_mtu+0x88/0x120 The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a pair and other writers serialize them with fnhe_lock. RCU alone prevents reclamation, but would still allow concurrent writers to leave a mixed pair. Walk the table under RCU and acquire fnhe_lock only while updating each exception. RCU keeps the current entry alive while the short critical section serializes its paired PMTU fields. This avoids holding the global lock while scanning all 2048 buckets for every nexthop. | ||||
| CVE-2026-74660 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ebt_nflog: pin the NFLOG backend nf_log_unregister() runs after the per-net teardown so its final RCU grace period also drains readers that obtained the logger from a per-net binding. However, ebt_nflog passes an explicit ULOG log type to nf_log_packet() without holding a reference on the selected logger module, unlike the xt_NFLOG and nft_log frontends. An ebtables nflog rule can therefore remain callable while nfnetlink_log is unloaded. The resulting interleaving is: CPU 0 CPU 1 nfnetlink_log_fini() unregister_pernet_subsys() kfree(nfnl_log_pernet(net)) ebt_nflog_tg() nf_log_packet() nfulnl_log_packet() instance_lookup_get_rcu() The global ULOG logger is still registered at this point, so CPU 1 dereferences the per-net state after CPU 0 has freed it. KASAN reported: BUG: KASAN: slab-use-after-free in instance_lookup_get_rcu Read of size 8 at addr ff110001052e6210 by task poc/92 Call Trace: instance_lookup_get_rcu+0x1ce/0x1f0 [nfnetlink_log] nfulnl_log_packet+0x248/0x2fb0 [nfnetlink_log] nf_log_packet+0x204/0x300 ebt_nflog_tg+0x351/0x550 ebt_do_table+0xedf/0x22b0 Allocated by task 90: __kmalloc_noprof+0x186/0x470 ops_init+0x6d/0x420 register_pernet_operations+0x2f6/0x670 register_pernet_subsys+0x23/0x40 Freed by task 93: kfree+0x131/0x3c0 ops_undo_list+0x3e3/0x700 unregister_pernet_operations+0x232/0x490 unregister_pernet_subsys+0x1c/0x30 nfnetlink_log_fini+0x34/0x450 [nfnetlink_log] Acquire the ULOG logger module reference when an ebt_nflog rule is validated and release it when the rule is destroyed. Request the NFLOG backend for legacy callers when needed, matching xt_NFLOG. This prevents module teardown until all ebt_nflog rules have stopped using the logger. | ||||
| CVE-2026-74715 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix netns reference imbalance in conntrack kfuncs The opts argument of the BPF conntrack kfuncs can point to a shared map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read opts->netns_id separately when acquiring and releasing the network namespace reference. The reference imbalance can occur as follows: CPU 0 CPU 1 read opts->netns_id (-1) skip get_net_ns_by_id() write opts->netns_id (id) read opts->netns_id (id) put_net(net) /* no matching get */ The reverse transition leaks the reference. Repeating the unmatched put can destroy a live namespace and crash later users. The kernel reported: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700 Call Trace: __sys_bpf+0x1662/0x50c0 __x64_sys_bpf+0x73/0xb0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: Fatal exception Snapshot every input field of opts with READ_ONCE() before validating or using it. The netns_id snapshot keeps the namespace get/put pair balanced, while the other snapshots keep the remaining options from changing partway through an invocation. The individual reads can still observe an inconsistent combination during a concurrent update, but each selected field value remains stable for that invocation. | ||||
| CVE-2026-74720 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve pointer state for commuted arithmetic When scalar += pointer is handled in adjust_ptr_min_max_vals(), the destination register inherits the pointer state from the source pointer. Copying only selected fields is fragile because pointer provenance is tracked by several bpf_reg_state fields. Use the caller's temporary offset register to preserve the scalar operand while replacing the destination with the full pointer state. This preserves the frame number for PTR_TO_STACK registers and keeps parent identity fields consistent. | ||||
| CVE-2026-74722 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix memory leak in btrfs_do_encoded_write() Local fuzzing of 6.12.94 has found the following memory leak: Unreferenced object 0xffff888018050a80 (size 64): comm "syz.0.17", pid 10297, jiffies 4294953601 hex dump (first 32 bytes): 00 10 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 10 0a 05 18 80 88 ff ff 10 0a 05 18 80 88 ff ff ................ backtrace (crc a8a6fc29): kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] slab_post_alloc_hook mm/slub.c:4152 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:878 [inline] extent_changeset_alloc fs/btrfs/extent_io.h:207 [inline] qgroup_reserve_data+0x1c5/0x7d0 fs/btrfs/qgroup.c:4305 btrfs_qgroup_reserve_data+0x2e/0xb0 fs/btrfs/qgroup.c:4355 btrfs_do_encoded_write+0x92e/0x1040 fs/btrfs/inode.c:9746 btrfs_encoded_write fs/btrfs/file.c:1482 [inline] btrfs_do_write_iter+0x280/0x610 fs/btrfs/file.c:1507 btrfs_ioctl_encoded_write+0x3d6/0x490 fs/btrfs/ioctl.c:4738 btrfs_ioctl+0x6f9/0xc90 fs/btrfs/ioctl.c:-1 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:47 [inline] do_syscall_64+0xbe/0x1a0 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f Unreferenced object 0xffff888018050a00 (size 64): comm "syz.0.17", pid 10297, jiffies 4294953601 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 ff 0f 00 00 00 00 00 00 ................ 90 0a 05 18 80 88 ff ff 90 0a 05 18 80 88 ff ff ................ backtrace (crc cb5c9580): kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] slab_post_alloc_hook mm/slub.c:4152 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] ulist_prealloc+0x9c/0x110 fs/btrfs/ulist.c:114 extent_changeset_prealloc fs/btrfs/extent_io.h:217 [inline] __set_extent_bit+0x16b/0x1a70 fs/btrfs/extent-io-tree.c:1086 set_record_extent_bits+0x50/0x90 fs/btrfs/extent-io-tree.c:1821 qgroup_reserve_data+0x274/0x7d0 fs/btrfs/qgroup.c:4312 btrfs_qgroup_reserve_data+0x2e/0xb0 fs/btrfs/qgroup.c:4355 btrfs_do_encoded_write+0x92e/0x1040 fs/btrfs/inode.c:9746 btrfs_encoded_write fs/btrfs/file.c:1482 [inline] btrfs_do_write_iter+0x280/0x610 fs/btrfs/file.c:1507 btrfs_ioctl_encoded_write+0x3d6/0x490 fs/btrfs/ioctl.c:4738 btrfs_ioctl+0x6f9/0xc90 fs/btrfs/ioctl.c:-1 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:47 [inline] do_syscall_64+0xbe/0x1a0 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by freeing an extent changeset before returning from btrfs_do_encoded_write(). | ||||
| CVE-2026-74725 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: enic: fix tx_hang_reset use-after-free on device removal enic_remove() cancels the reset and change_mtu_work items but does not cancel tx_hang_reset. A TX timeout that fires while the device is being removed can schedule enic_tx_hang_reset() so that it runs after free_netdev(), resulting in a use-after-free. cancel_work_sync() alone is not sufficient here: the still-live watchdog and notify paths can re-schedule these work items in the window between the cancel and unregister_netdev(). Use disable_work_sync(), which cancels the work and blocks any subsequent schedule_work() from requeuing it, and apply it to the reset and change_mtu_work items as well so the same requeue race is closed for all teardown work. | ||||
| CVE-2026-74726 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bonding: alb: re-check primary_is_promisc under RTNL in bond_alb_monitor bond_alb_monitor() reads primary_is_promisc under RCU, then drops RCU and takes RTNL via rtnl_trylock() before undoing the promiscuity it set on the active slave. In that window the active slave can change under RTNL (RTM_DELLINK -> __bond_release_one() -> bond_alb_handle_active_change()), which already drops the promiscuity and clears primary_is_promisc. The monitor still acts on the stale decision: if the slave was removed with no failover, curr_active_slave is now NULL and the deref faults; if it failed over, the stale dev_set_promiscuity(-1) underflows the new slave's promiscuity counter and pins it in IFF_PROMISC. Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: b42 bond_alb_monitor RIP: 0010:bond_alb_monitor (drivers/net/bonding/bond_alb.c:1600) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) Kernel panic - not syncing: Fatal exception Re-check primary_is_promisc (and curr_active_slave) after taking RTNL so the monitor only undoes an increment it still owns. The other bonding monitors already re-read state under RTNL in their commit phase (bond_miimon_commit/bond_ab_arp_commit); bond_alb_monitor() was the only one acting on the pre-trylock decision. | ||||
| CVE-2026-74729 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read put_fifo_with_discard() acts as both producer and consumer on the kfifo: it calls kfifo_skip() (advances out) and kfifo_put() (advances in) from the IRQ handler without synchronizing with snoop_file_read(), which also consumes via kfifo_to_user(). On SMP systems this concurrent access can leave (in - out) larger than the ring buffer, so __kfifo_to_user()'s clamp to (in - out) is ineffective and kfifo_copy_to_user() can attempt a copy_to_user() past the kmalloc-2k backing store: usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-2k' (offset 0, size 2049)! kernel BUG at mm/usercopy.c! Call trace: usercopy_abort __check_heap_object __check_object_size kfifo_copy_to_user __kfifo_to_user snoop_file_read vfs_read Serialize kfifo access with a per-channel spinlock shared between the IRQ handler (producer) and the file reader (consumer). Annotate @fifo with __guarded_by(&lock) and opt the driver into context analysis so the compiler enforces that all fifo access holds the lock. | ||||
| CVE-2026-74730 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Pin the 'struct nfs_server' during a FREE_STATEID call Dan Aloni reports that he was able to hit a use-after-free bug if a FREE_STATEID operation gets delayed for whatever reason. Fix this by bumping the refcount of the 'struct nfs_server' object for the duration of the FREE_STATEID so it doesn't get cleaned up from underneath us while operations are still in flight. | ||||
| CVE-2026-74731 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Skip sub-disable teardown for never-linked sub-schedulers A sub-scheduler enable can fail before scx_link_sched() links the sched into the hierarchy, e.g. when the parent is already being disabled, and cleanup still runs the full scx_sub_disable(). That is racy against root disable: drain_descendants() is the only ordering between a sub's disable-time task walk and root disable's all-task teardown, and an unlinked sub is invisible to it. Root's teardown can thus run between the never-linked sub's drain and its walk, exiting every task to no scheduler. The walk then trips the membership WARN and re-homes the exited tasks onto the dying hierarchy, a use-after-free. Skip the cgroup ownership reset and the task walk if @sch was never linked, indicated by the empty ->sibling as unlinking only happens later in the same function. The membership WARN remains valid: a linked sub is always waited on by an ancestor's drain. | ||||
| CVE-2026-74732 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check for tg ops in dce110_set_avmute Some older DCE timing generators do not implement is_tg_enabled in their ops table. Calling it unconditionally when waiting for AV mute frames causes a NULL pointer dereference on Southern Islands dGPUs when turning the display off over HDMI. Check that tg and the required ops exist before waiting for frames. (cherry picked from commit 2686a0c0aaa07bec2e24131835cf27b5fd4935a5) | ||||
| CVE-2026-74670 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: stop estimator after disabled calc phase IPVS estimator kthread 0 starts with zeroed chain and tick limits until its initial calculation phase completes. If network namespace teardown clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return without installing positive limits. The kthread can then continue into its main loop and drain est_temp_list with zero chain_max, tick_max and est_max_count values. Each enqueue consumes one available tick row, but est_count never reaches the zero est_max_count value. After all rows are consumed, the row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes past the ticks and tick_len arrays. Exit kthread 0 after the calculation phase if the kthread is stopping or IPVS has been disabled. That keeps temporary estimators from being drained after the limits failed to initialize. Estimator kthreads can now self-exit before teardown or reload stops kd->task. Keep an extra task reference after creation and release it with kthread_stop_put(), so kd->task remains valid until the stop paths consume that reference. | ||||
| CVE-2026-74675 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vt: stabilize tty reference in kbd_keycode with tty_port_tty_get kbd_keycode() reads vc->port.tty without acquiring a tty reference, racing against con_shutdown() which clears port.tty under a different lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference for the duration the tty pointer is needed. | ||||
| CVE-2026-74676 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vt: add permission check for KDSKBMETA ioctl KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process to change meta mode on a non-controlling console without authorization. | ||||