Export limit exceeded: 374977 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 374977 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (374977 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68227 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: cx231xx: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the driver state lifetime so that it is released on driver unbind. | ||||
| CVE-2026-68226 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: cx23885: add ioremap return check and cleanup Add a check for the return value of pci_ioremap_bar() in cx23885_dev_setup(). If ioremap for BAR0 fails, release the already allocated PCI memory region, decrement the device count, and return -ENODEV. This prevents a potential null pointer dereference and ensures proper cleanup on memory mapping failure. | ||||
| CVE-2026-68225 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: alvium: fix critical pointer access in alvium_ctrl_init The current implementation of alvium_ctrl_init creates several controls in function alvium_ctrl_init and uses the returned pointer without check. That can cause write access over NULL-pointer for several controls. The reworked code checks the pointers before adding flags. | ||||
| CVE-2026-68224 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: mali-c55: Fix possible ERR_PTR in enable_streams The media_pad_remote_pad_unique() function returns either a valid pointer or an ERR_PTR() on failure (-ENOTUNIQ if multiple links are enabled, -ENOLINK if no connected pad is found). The return value was assigned directly to isp->remote_src and dereferenced in the next line without checking for errors, which could lead to an ERR_PTR dereference. Add proper error checking with IS_ERR() before dereferencing the pointer. Also set isp->remote_src to NULL on error to maintain consistency with other error paths in the function. | ||||
| CVE-2026-68223 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: meson: vdec: Fix memory leak in error path of vdec_open The vdec_open() function previously jumped directly to err_m2m_release when vdec_init_ctrls() failed, skipping release of the m2m context. This caused a resource leak. Fix it by introducing a proper err_m2m_ctx_release label that calls v4l2_m2m_ctx_release(sess->m2m_ctx) before releasing the m2m device. This was identified via kmemleak: unreferenced object 0xffff0000205d6878 (size 8): comm "v4l_id", pid 5289, jiffies 4294938580 hex dump (first 8 bytes): 40 d2 49 18 00 00 ff ff @.I..... backtrace (crc d3204599): kmemleak_alloc+0xc8/0xf0 __kvmalloc_node_noprof+0x60c/0x850 v4l2_ctrl_handler_init_class+0x1b4/0x2e8 [videodev] vdec_open+0x1f4/0x788 [meson_vdec] v4l2_open+0x144/0x460 [videodev] chrdev_open+0x1ac/0x500 do_dentry_open+0x3f0/0xfe8 vfs_open+0x68/0x320 do_open+0x2d8/0x9a8 path_openat+0x1d0/0x4f0 do_filp_open+0x190/0x380 do_sys_openat2+0xf8/0x1b0 __arm64_sys_openat+0x13c/0x1e8 invoke_syscall+0xdc/0x268 el0_svc_common.constprop.0+0x178/0x258 do_el0_svc+0x4c/0x70 | ||||
| CVE-2026-68222 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: msi2500: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. msi2500_start_streaming() had five error paths that all hit this trap and were further tangled by ret-overwriting between calls: - -ENODEV when the USB device was already disconnected - -ERESTARTSYS when mutex_lock_interruptible() was interrupted - msi2500_set_usb_adc() failure: ret was silently overwritten by the next call (msi2500_isoc_init), so the error was lost entirely - msi2500_isoc_init() failure: cleanup_queued_bufs was called, but the function then fell through to msi2500_ctrl_msg() and again masked the original error by overwriting ret - msi2500_ctrl_msg(CMD_START_STREAMING) failure: no cleanup at all, leaving isoc URBs submitted with no way for the driver to consume them Consolidate the error paths into a small goto chain. Every failure now stops the function, drains the queued-buffer list, and returns the real error code. The ctrl_msg failure path also rolls back the preceding msi2500_isoc_init() via msi2500_isoc_cleanup() before unlocking and draining. The cleanup helper takes a vb2_buffer_state argument so that the start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as expected by userspace on start_streaming failure) while stop_streaming keeps its existing VB2_BUF_STATE_ERROR semantics. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68221 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: nuvoton: npcm-video: fix memory leaks in probe and remove npcm_video_probe() allocates the npcm_video structure with kzalloc_obj() but never frees it on any probe error path or in npcm_video_remove(), leaking the allocation on every failed probe and every normal unbind. Additionally, when npcm_video_setup_video() fails, the reserved memory association established by of_reserved_mem_device_init() in npcm_video_init() is not released, leaking the rmem_assigned_device entry on the global list. Fix both by adding kfree(video) to all probe error paths and to npcm_video_remove(), and adding the missing of_reserved_mem_device_release() call when npcm_video_setup_video() fails. | ||||
| CVE-2026-68220 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Add missing v4l2_subdev_cleanup() in crossbar and pipe Both mxc_isi_crossbar_init() and mxc_isi_pipe_init() call v4l2_subdev_init_finalize() which allocates the subdev active state, but neither mxc_isi_crossbar_cleanup() nor mxc_isi_pipe_cleanup() calls v4l2_subdev_cleanup() to free it. This causes a memory leak on every rmmod, reported by kmemleak: unreferenced object 0xffff0000d06fc800 (size 192): comm "(udev-worker)", pid 254, jiffies 4294913455 backtrace (crc 36eeae58): kmemleak_alloc+0x34/0x40 __kvmalloc_node_noprof+0x5f8/0x7d8 __v4l2_subdev_state_alloc+0x1fc/0x30c __v4l2_subdev_init_finalize+0x178/0x368 Add the missing v4l2_subdev_cleanup() calls before media_entity_cleanup() in both crossbar and pipe cleanup paths. | ||||
| CVE-2026-68219 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix potential out-of-bounds issues The maximum downscaling factor supported by ISI can be up to 16. Add minimum value constraint before applying the setting to hardware. Otherwise, the process will not respond even when Ctrl+C is executed. | ||||
| CVE-2026-68217 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: pwc: Drain fill_buf on start_streaming() failure pwc_isoc_init() submits its isochronous URBs with usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is submitted, its completion handler pwc_isoc_handler() can run on another CPU before the loop finishes: start_streaming() pwc_isoc_init() usb_submit_urb(urbs[0], GFP_KERNEL) pwc_isoc_handler(urbs[0]) pdev->fill_buf = pwc_get_next_fill_buf(pdev) usb_submit_urb(urbs[i>0], ..) -> fails pwc_isoc_cleanup(pdev) /* kills URBs */ return ret; pwc_cleanup_queued_bufs(pdev, VB2_BUF_STATE_QUEUED) pwc_get_next_fill_buf() detaches a buffer from pdev->queued_bufs and stores it in pdev->fill_buf. The error path in start_streaming() only drains pdev->queued_bufs, so the buffer parked in pdev->fill_buf is leaked. vb2_start_streaming() then triggers WARN_ON(owned_by_drv_count). stop_streaming() already handles this since commit 80b0963e1698 ("[media] pwc: fix WARN_ON"), which added the fill_buf drain in the teardown path but not in the start_streaming() error path. Mirror that handling on failure so start_streaming() returns with no buffer owned by the driver. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||
| CVE-2026-68214 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832: fix use-after-free in rtl2832_remove() cancel_delayed_work_sync() is called before i2c_mux_del_adapters() in rtl2832_remove(). While the cancel waits for any running instance of i2c_gate_work to finish, it does not prevent the timer from being rescheduled by a concurrent thread. During probe, the r820t_attach() call attempts I2C transfers through the mux adapter. These transfers go through i2c_mux_master_xfer(), which calls rtl2832_deselect() after the transfer completes, rescheduling i2c_gate_work via schedule_delayed_work(). If this transfer is still in flight when rtl2832_remove() runs, rtl2832_deselect() can reschedule i2c_gate_work after it has been cancelled, causing a use-after-free when kfree(dev) is called. Fix this by calling i2c_mux_del_adapters() before cancel_delayed_work_sync(). Once the mux adapter is unregistered, no new I2C transfers can go through it, so rtl2832_deselect() can no longer reschedule i2c_gate_work. The subsequent cancel_delayed_work_sync() is then guaranteed to be final. | ||||
| CVE-2026-68213 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. rtl2832_sdr_start_streaming() had multiple error paths that hit this trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six `goto err` paths covering subdev s_power, tuner setup, ADC setup, stream-buffer allocation, urb allocation, and urb submission failures. None of them returned the queued buffers. The original function had no distinct success exit and fell straight through into the err label, which previously only did mutex_unlock and "return ret". Adding queued-buffer cleanup at err must therefore be paired with an explicit success return; otherwise every successful start would also drain the buffer queue and kill streaming. Add that success return, then add rtl2832_sdr_cleanup_queued_bufs() at the err label and before each early return. The cleanup helper takes a vb2_buffer_state argument so that the start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as expected by userspace on start_streaming failure) while stop_streaming keeps its existing VB2_BUF_STATE_ERROR semantics. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). The err label still does not roll back power_ctrl(), frontend_ctrl(), the POWER_ON flag, or stream/URB allocations that may have happened before the failing step. Those are pre-existing leaks of a different class and are not addressed here. | ||||
| CVE-2026-68211 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: stm32-dcmipp: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. dcmipp_bytecap_start_streaming() returned -EINVAL when the source subdevice could not be resolved from the media graph, before pm_runtime_resume_and_get() and media_pipeline_start() had been called. The remaining error paths already converge on the err_buffer_done label, which calls dcmipp_bytecap_all_buffers_done(..., VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate err_pm_put / err_media_pipeline_stop labels are skipped, which is correct because nothing they would undo has happened yet. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68210 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: stm32: dcmi: unregister notifier on probe failure dcmi_graph_init() registers the async notifier before dcmi_probe() toggles the reset line. If reset_control_assert() or reset_control_deassert() fails afterwards, probe returns through err_cleanup and the driver core will not call dcmi_remove(). Unregister the notifier before cleaning it up on that error path, matching the successful remove path and the V4L2 async notifier lifetime rules. [hverkuil: added Fixes tag] | ||||
| CVE-2026-68209 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: sun4i-csi: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. sun4i_csi_start_streaming() returned -EINVAL when no matching CSI format could be found, before any setup (scratch buffer allocation, pipeline start) had been performed. The remaining error paths already converge on the err_clear_dma_queue label, which calls return_all_buffers(..., VB2_BUF_STATE_QUEUED) under csi->qlock. Jump to that label directly: the intermediate err_disable_device / err_disable_pipeline / err_free_scratch_buffer labels are skipped, which is correct because nothing they would undo has happened yet. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68208 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: ti: vpe: Fix the error code of devm_kzalloc() in vip_probe_slice() In vip_probe_slice(), the error check for devm_kzalloc() incorrectly uses PTR_ERR_OR_ZERO() which returns 0 for NULL pointer. Return -ENOMEM for devm_kzalloc() failure. | ||||
| CVE-2026-68207 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: ti: vpe: unwind v4l2 device registration on probe error If the vpe_top resource is missing, vpe_probe() returns -ENODEV after v4l2_device_register() has succeeded. Probe failures do not call the driver's remove callback, so the v4l2 device remains registered on that error path. Route that failure through the existing v4l2_device_unregister() unwind label, matching the other errors after v4l2_device_register(). | ||||
| CVE-2026-68205 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor() The v4l2 helper v4l2_async_register_subdev_sensor() calls v4l2_async_register_subdev(), which is a macro that expands to __v4l2_async_register_subdev(sd,THIS_MODULE). Since the macro is expanded inside v4l2-fwnode.c, THIS_MODULE resolves to the v4l2-fwnode module rather than the sensor driver module that originally set sd->owner. When v4l2-fwnode is built-in, THIS_MODULE evaluates to NULL, which then overwrites the sensor driver's owner with NULL. This causes the problem that the sensor module's reference count is never incremented during async registration, so the module can be removed while the subdevice is still in use by a notifier (e.g., a CSI-2 receiver bridge driver). Fix this by renaming v4l2_async_register_subdev_sensor() to __v4l2_async_register_subdev_sensor() with an added explicit module argument and introducing a wrapper macro: #define v4l2_async_register_subdev_sensor(sd) \ __v4l2_async_register_subdev_sensor(sd, THIS_MODULE) This ensures the sensor driver module is properly referenced even when the sensor driver does not init the owner field before calling v4l2_async_register_subdev_sensor() and prevents premature module removal. | ||||
| CVE-2026-68203 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix cleanup bugs in vivid_init() When platform_device_register() fails in vivid_init(), the embedded struct device in vivid_pdev has already been initialized by device_initialize(), but the failure path jumps to free_output_strings without dropping the device reference for the current platform device: vivid_init() -> platform_device_register(&vivid_pdev) -> device_initialize(&vivid_pdev.dev) -> setup_pdev_dma_masks(&vivid_pdev) -> platform_device_add(&vivid_pdev) This leads to a reference leak when platform_device_register() fails. Fix this by calling platform_device_put() before jumping to the common cleanup path. Also, the unreg_driver label incorrectly calls platform_driver_register() instead of platform_driver_unregister(), which breaks cleanup when workqueue creation fails after successful driver registration. Fix that as well. The reference leak was identified by a static analysis tool I developed and confirmed by manual review. The incorrect cleanup call was found during code inspection. | ||||
| CVE-2026-68199 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB access from firmware ADDBA window size aggr_recv_addba_req_evt() logs a debug message when the firmware-supplied win_sz is outside [AGGR_WIN_SZ_MIN, AGGR_WIN_SZ_MAX] but does not return. The out-of-range win_sz is then used in TID_WINDOW_SZ() to compute a kzalloc size and stored in rxtid->hold_q_sz, leading to zero-size or overflowed allocations and subsequent out-of-bounds access. Clean up any previously active aggregation session for the TID first, then return early when win_sz is out of the valid range, instead of proceeding with a broken allocation size. | ||||