Export limit exceeded: 369577 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (369577 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53378 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/colorop: Fix blob property reference tracking in state lifecycle The colorop state blob property handling had memory leaks during state duplication, destruction, and reset operations. The implementation failed to follow the established pattern from drm_crtc's handling of DEGAMMA/GAMMA blob properties. Issues fixed: - drm_colorop_atomic_destroy_state() was freeing state memory without releasing the blob reference, causing a leak - drm_colorop_reset() was directly freeing old state with kfree() instead of properly destroying it, leaking blob references - drm_colorop_cleanup() had duplicate blob cleanup code Changes: - Add __drm_atomic_helper_colorop_destroy_state() helper to properly release blob references before freeing state memory - Update drm_colorop_atomic_destroy_state() to call the helper - Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state() for proper cleanup of old state - Simplify drm_colorop_cleanup() to use the common destruction path This matches the well-tested pattern used by drm_crtc since 2016 and ensures proper reference counting throughout the state lifecycle. Co-developed by Claude Sonnet 4.5. | ||||
| CVE-2026-53372 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Block PASID attachment to nested domain with dirty tracking Kernel lacks dirty tracking support on nested domain attached to PASID, fails the attachment early if nesting parent domain is dirty tracking configured, otherwise dirty pages would be lost. | ||||
| CVE-2026-53371 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ionic: bound node_desc sysfs read with %.64s node_desc[64] in struct ib_device is not guaranteed to be NUL- terminated. The core IB sysfs handler uses "%.64s" for exactly this reason (drivers/infiniband/core/sysfs.c:1307), since node_desc_store() performs a raw memcpy of up to IB_DEVICE_NODE_DESC_MAX bytes with no NUL termination: memcpy(desc.node_desc, buf, min_t(int, count, IB_DEVICE_NODE_DESC_MAX)); If exactly 64 bytes are written via the node_desc sysfs file, the array contains no NUL byte. The ionic hca_type_show() handler uses unbounded "%s" and will read past the end of node_desc into adjacent fields of struct ib_device until it encounters a NUL. ionic supports IB_DEVICE_MODIFY_NODE_DESC, so this is triggerable by userspace. Match the core handler and bound the format specifier. | ||||
| CVE-2026-53370 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Improve validation and configuration of ACR masks Currently there are several issues on the user space ACR mask validation and configuration. - The validation for user space ACR mask (attr.config2) is incomplete, e.g., the ACR mask could include the index which belongs to another ACR events group, but it's not validated. - An early return on an invalid ACR mask caused all subsequent ACR groups to be skipped. - The stale hardware ACR mask (hw.config1) is not cleared before setting new hardware ACR mask. The following changes address all of the above issues. - Figure out the event index group of an ACR group. Any bits in the user-space mask not present in the index group are now dropped. - Instead of an early return on invalid bits, drop only the invalid portions and continue iterating through all ACR events to ensure full configuration. - Explicitly clear the stale hardware ACR mask for each event prior to writing the new configuration. Besides, a non-leader event member of ACR group could be disabled in theory. This could cause bit-shifting errors in the acr_mask of remaining group members. But since ACR sampling requires all events to be active, this should not be a big concern in real use case. Add a "FIXME" comment to notice this risk. | ||||
| CVE-2026-53367 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: selinux: fix avdcache auditing The per-task avdcache was incorrectly saving and reusing the audited vector computed by avc_audit_required() rather than recomputing based on the currently requested permissions and distinguishing the denied versus allowed cases. As a result, some permission checks were not being audited, e.g. directory write checks after a previously cached directory search check. [PM: line wrap tweaks] | ||||
| CVE-2026-53689 | 1 Sahlberg | 1 Libnfs | 2026-07-19 | 7.1 High |
| libnfs through 6.0.2 before 55c18ea does not validate a string size, leading to an integer overflow during a connection to a crafted NFS server. This occurs in libnfs_zdr_string in lib/libnfs-zdr.c. | ||||
| CVE-2026-16154 | 1 Sourcecodester | 1 Class And Exam Timetabling System | 2026-07-18 | 7.3 High |
| A vulnerability was determined in SourceCodester Class and Exam Timetabling System 1.0/1.php. Affected by this vulnerability is an unknown functionality of the file /edit_room1.php. Executing a manipulation of the argument ID can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. | ||||
| CVE-2026-16130 | 1 Nearai | 1 Ironclaw | 2026-07-18 | 4.4 Medium |
| A vulnerability was identified in nearai ironclaw up to 0.29.1. The affected element is the function validate_path of the file src/tools/builtin/path_utils.rs of the component write_file. The manipulation leads to link following. Local access is required to approach this attack. The exploit is publicly available and might be used. The identifier of the patch is 369ff3d240cf3c0787b50e1e9f182e1a06c71255. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2026-53226 | 1 Linux | 1 Linux Kernel | 2026-07-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: rockchip: fix generic IRQ chip leak on remove The driver allocates domain generic chips using irq_alloc_domain_generic_chips() during probe. However, on driver remove/teardown, the generic chips are not automatically freed when the IRQ domain is removed because the domain flags do not include IRQ_DOMAIN_FLAG_DESTROY_GC. This causes both the domain generic chips structure and the associated generic chips to be leaked. Additionally, the generic chips remain on the global gc_list and may later be visited by generic IRQ chip suspend, resume, or shutdown callbacks after the GPIO bank has been removed, potentially resulting in a use-after-free and kernel crash. Fix the resource leak by explicitly calling irq_domain_remove_generic_chips() before removing the IRQ domain in rockchip_gpio_remove(). | ||||
| CVE-2026-53027 | 1 Linux | 1 Linux Kernel | 2026-07-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked() When a compressed or sparse attribute has its clusters frame-aligned, vcn is rounded down to the frame start using cmask, which can result in vcn != vcn0. In this case, vcn and vcn0 may reside in different attribute segments. The code already handles the case where vcn is in a different segment by loading its runs before allocation. However, it fails to load runs for vcn0 when vcn0 resides in a different segment than vcn. This causes run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was never loaded into the in-memory run list, triggering the WARN_ON(1). Fix this by adding a missing check for vcn0 after the existing vcn segment check. If vcn0 falls outside the current segment range [svcn, evcn1), find and load the attribute segment containing vcn0 before performing the run lookup. The following scenario triggers the bug: attr_data_get_block_locked() vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment load runs for vcn segment <- vcn0 segment not loaded! attr_allocate_clusters() <- allocation succeeds run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN WARN_ON(1) <- bug fires here! | ||||
| CVE-2026-46093 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: take vmap_purge_lock in shrinker decay_va_pool_node() can be invoked concurrently from two paths: __purge_vmap_area_lazy() when pools are being purged, and the shrinker via vmap_node_shrink_scan(). However, decay_va_pool_node() is not safe to run concurrently, and the shrinker path currently lacks serialization, leading to races and possible leaks. Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker path to ensure serialization with purge users. | ||||
| CVE-2026-45945 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix race condition during PASID entry replacement The Intel VT-d PASID table entry is 512 bits (64 bytes). When replacing an active PASID entry (e.g., during domain replacement), the current implementation calculates a new entry on the stack and copies it to the table using a single structure assignment. struct pasid_entry *pte, new_pte; pte = intel_pasid_get_entry(dev, pasid); pasid_pte_config_first_level(iommu, &new_pte, ...); *pte = new_pte; Because the hardware may fetch the 512-bit PASID entry in multiple 128-bit chunks, updating the entire entry while it is active (Present bit set) risks a "torn" read. In this scenario, the IOMMU hardware could observe an inconsistent state — partially new data and partially old data — leading to unpredictable behavior or spurious faults. Fix this by removing the unsafe "replace" helpers and following the "clear-then-update" flow, which ensures the Present bit is cleared and the required invalidation handshake is completed before the new configuration is applied. | ||||
| CVE-2025-21807 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: fix queue freeze vs limits lock order in sysfs store methods queue_attr_store() always freezes a device queue before calling the attribute store operation. For attributes that control queue limits, the store operation will also lock the queue limits with a call to queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may need to issue commands to a device to obtain limit values from the hardware with the queue limits locked. This creates a potential ABBA deadlock situation if a user attempts to modify a limit (thus freezing the device queue) while the device driver starts a revalidation of the device queue limits. Avoid such deadlock by not freezing the queue before calling the ->store_limit() method in struct queue_sysfs_entry and instead use the queue_limits_commit_update_frozen helper to freeze the queue after taking the limits lock. This also removes taking the sysfs lock for the store_limit method as it doesn't protect anything here, but creates even more nesting. Hopefully it will go away from the actual sysfs methods entirely soon. (commit log adapted from a similar patch from Damien Le Moal) | ||||
| CVE-2025-71397 | 2026-07-18 | N/A | ||
| SurrealDB before 2.0.5, 2.1.x before 2.1.5, and 2.2.x before 2.2.2 allows authenticated users with OWNER or EDITOR permissions (at the root, namespace, or database level) to define custom database functions via DEFINE FUNCTION using nested FOR loops. Although a single loop's iteration count is constrained, nesting multiple loops (e.g., each with 1,000,000 iterations) is not, so an attacker can execute a function that consumes all server CPU time. Configured timeouts do not stop the execution, rendering the server unresponsive to other queries and connections until it is manually restarted. | ||||
| CVE-2026-16158 | 2026-07-18 | 8.7 High | ||
| Impact: @fastify/reply-from versions from 8.3.1 up to but not including 12.6.4 build the internal URL cache key by concatenating the destination and source path without a delimiter. Different destination and source pairs can therefore produce the same key while resolving to different upstream URLs. When getUpstream selects an upstream from request data, a URL cached for one upstream can be reused for a request intended for another upstream, causing cross-upstream data access and modification. The default configuration is affected. Setting disableCache to true prevents the behavior. Patches: upgrade to @fastify/reply-from 12.6.4. Workarounds: pass disableCache: true when registering the plugin. | ||||
| CVE-2026-47869 | 2026-07-18 | 8.7 High | ||
| VMware Avi Load Balancer contains a remote code execution vulnerability. A malicious authenticated user with network access may be able to inject and execute code. Affected versions: 32.1.1 (fixed in 32.1.2) 31.1.1 through 31.2.2 (fixed in 31.2.2-2p3) 30.1.1 through 30.2.6 (fixed in 30.2.7) 22.1.1 through 22.1.7 (fixed in 30.2.7) | ||||
| CVE-2026-47868 | 2026-07-18 | 7.8 High | ||
| VMware Avi Load Balancer contains a local privilege escalation vulnerability. A malicious user with local access may be able to escalate their privileges to run code as root. Affected versions: 32.1.1 (fixed in 32.1.2) 31.1.1 through 31.2.2 (fixed in 31.2.2-2p3) 30.1.1 through 30.2.6 (fixed in 30.2.7) 22.1.1 through 22.1.7 (fixed in 30.2.7) | ||||
| CVE-2026-53366 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Enterprise Linux Eus | 2026-07-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: account for fraggap on the paged allocation path In __ip_append_data(), when the paged-allocation branch is taken, alloclen and pagedlen are computed as alloclen = fragheaderlen + transhdrlen; pagedlen = datalen - transhdrlen; datalen already includes fraggap, but the fraggap bytes carried over from the previous skb are copied into the new skb's linear area at offset transhdrlen by the subsequent skb_copy_and_csum_bits(). The linear area is therefore undersized by fraggap bytes while pagedlen is overstated by the same amount. The non-paged branch sets alloclen to fraglen, which already accounts for fraggap because datalen does. Bring the paged branch in line by adding fraggap to alloclen and subtracting it from pagedlen. After this adjustment, copy no longer collapses to -fraggap on the paged path, so remove the stale comment describing that old arithmetic. | ||||
| CVE-2026-53363 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags() iptfs_consume_frags() transfers paged fragments from one socket buffer to another but fails to propagate the SKBFL_SHARED_FRAG flag. This is the same class of bug that was fixed in skb_try_coalesce() for CVE-2026-46300: when fragments backed by read-only page-cache pages are merged, the marker indicating their shared nature must be preserved so that ESP can decide correctly whether in-place encryption is safe. Apply the same two-line fix used in skb_try_coalesce() to iptfs_consume_frags(). | ||||
| CVE-2026-53362 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: account for fraggap on the paged allocation path In __ip6_append_data(), when the paged-allocation branch is taken (MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are computed as alloclen = fragheaderlen + transhdrlen; pagedlen = datalen - transhdrlen; datalen already includes fraggap (datalen = length + fraggap). When fraggap is non-zero, this is not the first skb and transhdrlen is zero. The fraggap bytes carried over from the previous skb are copied just past the fragment headers in the new skb's linear area. The linear area is therefore undersized by fraggap bytes while pagedlen is overstated by the same amount, and the copy writes past skb->end into the trailing skb_shared_info. An unprivileged user can trigger this via a UDPv6 socket using MSG_MORE together with MSG_SPLICE_PAGES. The bad accounting was introduced by commit 773ba4fe9104 ("ipv6: avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix __ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative copy value caused -EINVAL to be returned. That later commit allowed MSG_SPLICE_PAGES to proceed in this case, making the corruption triggerable. The non-paged branch sets alloclen to fraglen, which already accounts for fraggap because datalen does. Bring the paged branch in line by adding fraggap to alloclen and subtracting it from pagedlen. After this adjustment, copy no longer collapses to -fraggap on the paged path, so remove the stale comment describing that old arithmetic. Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES case, remove the MSG_SPLICE_PAGES exception from the negative copy check. | ||||