Export limit exceeded: 19669 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (19669 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45985 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O When allocating blocks during within-EOF DIO and writeback with dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was set when calling ext4_split_convert_extents(), which may potentially result in stale data issues. Assume we have an unwritten extent, and then DIO writes the second half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, ext4_iomap_alloc() call ext4_map_blocks() with EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the above flags set. Then, ext4_split_convert_extents() calls ext4_split_extent() with EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2 flags set, and it calls ext4_split_extent_at() to split the second half with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at() failed to insert extent since a temporary lack -ENOSPC. It zeroes out the first half but convert the entire on-disk extent to written since the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten in the extent status tree. [0000000000SSSSSS] data S: stale data, 0: zeroed [WWWWWWWWWWWWWWWW] on-disk extent W: written extent [WWWWWWWWWWUUUUUU] extent status tree Finally, if the DIO failed to write data to the disk, the stale data in the second half will be exposed once the cached extent entry is gone. Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting an unwritten extent before submitting I/O, and make ext4_split_convert_extents() to zero out the entire extent range to zero for this case, and also mark the extent in the extent status tree for consistency. | ||||
| CVE-2026-45986 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccree - fix a memory leak in cc_mac_digest() Add cc_unmap_result() if cc_map_hash_request_final() fails to prevent potential memory leak. | ||||
| CVE-2026-45987 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Sync interrupt shadow to cached vmcb12 after VMRUN of L2 After VMRUN in guest mode, nested_sync_control_from_vmcb02() syncs fields written by the CPU from vmcb02 to the cached vmcb12. This is because the cached vmcb12 is used as the authoritative copy of some of the controls, and is the payload when saving/restoring nested state. int_state is also written by the CPU, specifically bit 0 (i.e. SVM_INTERRUPT_SHADOW_MASK) for nested VMs, but it is not sync'd to cached vmcb12. This does not cause a problem if KVM_SET_NESTED_STATE preceeds KVM_SET_VCPU_EVENTS in the restore path, as an interrupt shadow would be correctly restored to vmcb02 (KVM_SET_VCPU_EVENTS overwrites what KVM_SET_NESTED_STATE restored in int_state). However, if KVM_SET_VCPU_EVENTS preceeds KVM_SET_NESTED_STATE, an interrupt shadow would be restored into vmcb01 instead of vmcb02. This would mostly be benign for L1 (delays an interrupt), but not for L2. For L2, the vCPU could hang (e.g. if a wakeup interrupt is delivered before a HLT that should have been in an interrupt shadow). Sync int_state to the cached vmcb12 in nested_sync_control_from_vmcb02() to avoid this problem. With that, KVM_SET_NESTED_STATE restores the correct interrupt shadow state, and if KVM_SET_VCPU_EVENTS follows it would overwrite it with the same value. | ||||
| CVE-2026-45988 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix re-decryption of RESPONSE packets If a RESPONSE packet gets a temporary failure during processing, it may end up in a partially decrypted state - and then get requeued for a retry. Fix this by just discarding the packet; we will send another CHALLENGE packet and thereby elicit a further response. Similarly, discard an incoming CHALLENGE packet if we get an error whilst generating a RESPONSE; the server will send another CHALLENGE. | ||||
| CVE-2026-45989 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: of: unittest: fix use-after-free in testdrv_probe() The function testdrv_probe() retrieves the device_node from the PCI device, applies an overlay, and then immediately calls of_node_put(dn). This releases the reference held by the PCI core, potentially freeing the node if the reference count drops to zero. Later, the same freed pointer 'dn' is passed to of_platform_default_populate(), leading to a use-after-free. The reference to pdev->dev.of_node is owned by the device model and should not be released by the driver. Remove the erroneous of_node_put() to prevent premature freeing. | ||||
| CVE-2026-45990 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: slub: fix data loss and overflow in krealloc() Commit 2cd8231796b5 ("mm/slub: allow to set node and align in k[v]realloc") introduced the ability to force a reallocation if the original object does not satisfy new alignment or NUMA node, even when the object is being shrunk. This introduced two bugs in the reallocation fallback path: 1. Data loss during NUMA migration: The jump to 'alloc_new' happens before 'ks' and 'orig_size' are initialized. As a result, the memcpy() in the 'alloc_new' block would copy 0 bytes into the new allocation. 2. Buffer overflow during shrinking: When shrinking an object while forcing a new alignment, 'new_size' is smaller than the old size. However, the memcpy() used the old size ('orig_size ?: ks'), leading to an out-of-bounds write. The same overflow bug exists in the kvrealloc() fallback path, where the old bucket size ksize(p) is copied into the new buffer without being bounded by the new size. A simple reproducer: // e.g. add to lkdtm as KREALLOC_SHRINK_OVERFLOW while (1) { void *p = kmalloc(128, GFP_KERNEL); p = krealloc_node_align(p, 64, 256, GFP_KERNEL, NUMA_NO_NODE); kfree(p); } demonstrates the issue: ================================================================== BUG: KFENCE: out-of-bounds write in memcpy_orig+0x68/0x130 Out-of-bounds write at 0xffff8883ad757038 (120B right of kfence-#47): memcpy_orig+0x68/0x130 krealloc_node_align_noprof+0x1c8/0x340 lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm] lkdtm_do_action+0x3a/0x60 [lkdtm] ... kfence-#47: 0xffff8883ad756fc0-0xffff8883ad756fff, size=64, cache=kmalloc-64 allocated by task 316 on cpu 7 at 97.680481s (0.021813s ago): krealloc_node_align_noprof+0x19c/0x340 lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm] lkdtm_do_action+0x3a/0x60 [lkdtm] ... ================================================================== Fix it by moving the old size calculation to the top of __do_krealloc() and bounding all copy lengths by the new allocation size. | ||||
| CVE-2026-45994 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix OOB reads in command_file_write due to missing size checks The command_file_write() handler allocates a kernel buffer of exactly count bytes and copies user data into it, but does not validate the buffer against the dot command protocol before passing it to get_dot_command_size() and get_dot_command_timeout(). Since both the allocation size (count) and the header fields (command_size, data_size) are independently user-controlled, an attacker can cause get_dot_command_size() to return a value exceeding the allocation, triggering OOB reads in get_dot_command_timeout() and an out-of-bounds memcpy_toio() that leaks kernel heap memory to the service processor. Fix with two guards: reject writes smaller than sizeof(struct dot_command_header) before allocation, then after copying user data reject commands where the buffer is smaller than the total size declared by the header (sizeof(header) + command_size + data_size). This ensures all subsequent header and payload field accesses stay within the buffer. | ||||
| CVE-2026-45995 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix user_struct uaf io_free_rbuf_ring() usees a struct user_struct, which io_zcrx_ifq_free() puts it down before destroying the ring. | ||||
| CVE-2026-46058 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: amphion: Fix race between m2m job_abort and device_run Fix kernel panic caused by race condition where v4l2_m2m_ctx_release() frees m2m_ctx while v4l2_m2m_try_run() is about to call device_run with the same context. Race sequence: v4l2_m2m_try_run(): v4l2_m2m_ctx_release(): lock/unlock v4l2_m2m_cancel_job() job_abort() v4l2_m2m_job_finish() kfree(m2m_ctx) <- frees ctx device_run() <- use-after-free crash at 0x538 Crash trace: Unable to handle kernel read from unreadable memory at virtual address 0000000000000538 v4l2_m2m_try_run+0x78/0x138 v4l2_m2m_device_run_work+0x14/0x20 The amphion vpu driver does not rely on the m2m framework's device_run callback to perform encode/decode operations. Fix the race by preventing m2m framework job scheduling entirely: - Add job_ready callback returning 0 (no jobs ready for m2m framework) - Remove job_abort callback to avoid the race condition | ||||
| CVE-2026-45997 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails If device_add(&sdkp->disk_dev) fails, put_device() runs scsi_disk_release(), which frees the scsi_disk but leaves the gendisk referenced. The device_add_disk() error path in sd_probe() calls put_disk(gd); call put_disk(gd) here to mirror that cleanup. | ||||
| CVE-2026-45998 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential UAF after skb_unshare() failure If skb_unshare() fails to unshare a packet due to allocation failure in rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread()) will be NULL'd out. This will likely cause the call to trace_rxrpc_rx_done() to oops. Fix this by moving the unsharing down to where rxrpc_input_call_event() calls rxrpc_input_call_packet(). There are a number of places prior to that where we ignore DATA packets for a variety of reasons (such as the call already being complete) for which an unshare is then avoided. And with that, rxrpc_input_packet() doesn't need to take a pointer to the pointer to the packet, so change that to just a pointer. | ||||
| CVE-2026-46000 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix conn-level packet handling to unshare RESPONSE packets The security operations that verify the RESPONSE packets decrypt bits of it in place - however, the sk_buff may be shared with a packet sniffer, which would lead to the sniffer seeing an apparently corrupt packet (actually decrypted). Fix this by handing a copy of the packet off to the specific security handler if the packet was cloned. | ||||
| CVE-2026-46046 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix missing brelse() in ext4_xattr_inode_dec_ref_all() The commit c8e008b60492 ("ext4: ignore xattrs past end") introduced a refcount leak in when block_csum is false. ext4_xattr_inode_dec_ref_all() calls ext4_get_inode_loc() to get iloc.bh, but never releases it with brelse(). | ||||
| CVE-2026-45965 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix invalid deref of rawdata when export_binary is unset If the export_binary parameter is disabled on runtime, profiles that were loaded before that will still have their rawdata stored in apparmorfs, with a symbolic link to the rawdata on the policy directory. When one of those profiles are replaced, the rawdata is set to NULL, but when trying to resolve the symbolic links to rawdata for that profile, it will try to dereference profile->rawdata->name when profile->rawdata is now NULL causing an oops. Fix it by checking if rawdata is set. [ 168.653080] BUG: kernel NULL pointer dereference, address: 0000000000000088 [ 168.657420] #PF: supervisor read access in kernel mode [ 168.660619] #PF: error_code(0x0000) - not-present page [ 168.663613] PGD 0 P4D 0 [ 168.665450] Oops: Oops: 0000 [#1] SMP NOPTI [ 168.667836] CPU: 1 UID: 0 PID: 1729 Comm: ls Not tainted 6.19.0-rc7+ #3 PREEMPT(voluntary) [ 168.672308] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 168.679327] RIP: 0010:rawdata_get_link_base.isra.0+0x23/0x330 [ 168.682768] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 48 89 55 d0 48 85 ff 0f 84 e3 01 00 00 <48> 83 3c 25 88 00 00 00 00 0f 84 d4 01 00 00 49 89 f6 49 89 cc e8 [ 168.689818] RSP: 0018:ffffcdcb8200fb80 EFLAGS: 00010282 [ 168.690871] RAX: ffffffffaee74ec0 RBX: 0000000000000000 RCX: ffffffffb0120158 [ 168.692251] RDX: ffffcdcb8200fbe0 RSI: ffff88c187c9fa80 RDI: ffff88c186c98a80 [ 168.693593] RBP: ffffcdcb8200fbc0 R08: 0000000000000000 R09: 0000000000000000 [ 168.694941] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88c186c98a80 [ 168.696289] R13: 00007fff005aaa20 R14: 0000000000000080 R15: ffff88c188f4fce0 [ 168.697637] FS: 0000790e81c58280(0000) GS:ffff88c20a957000(0000) knlGS:0000000000000000 [ 168.699227] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 168.700349] CR2: 0000000000000088 CR3: 000000012fd3e000 CR4: 0000000000350ef0 [ 168.701696] Call Trace: [ 168.702325] <TASK> [ 168.702995] rawdata_get_link_data+0x1c/0x30 [ 168.704145] vfs_readlink+0xd4/0x160 [ 168.705152] do_readlinkat+0x114/0x180 [ 168.706214] __x64_sys_readlink+0x1e/0x30 [ 168.708653] x64_sys_call+0x1d77/0x26b0 [ 168.709525] do_syscall_64+0x81/0x500 [ 168.710348] ? do_statx+0x72/0xb0 [ 168.711109] ? putname+0x3e/0x80 [ 168.711845] ? __x64_sys_statx+0xb7/0x100 [ 168.712711] ? x64_sys_call+0x10fc/0x26b0 [ 168.713577] ? do_syscall_64+0xbf/0x500 [ 168.714412] ? do_user_addr_fault+0x1d2/0x8d0 [ 168.715404] ? irqentry_exit+0xb2/0x740 [ 168.716359] ? exc_page_fault+0x90/0x1b0 [ 168.717307] entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2026-45966 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL pointer dereference in __unix_needs_revalidation When receiving file descriptors via SCM_RIGHTS, both the socket pointer and the socket's sk pointer can be NULL during socket setup or teardown, causing NULL pointer dereferences in __unix_needs_revalidation(). This is a regression in AppArmor 5.0.0 (kernel 6.17+) where the new __unix_needs_revalidation() function was added without proper NULL checks. The crash manifests as: BUG: kernel NULL pointer dereference, address: 0x0000000000000018 RIP: aa_file_perm+0xb7/0x3b0 (or +0xbe/0x3b0, +0xc0/0x3e0) Call Trace: apparmor_file_receive+0x42/0x80 security_file_receive+0x2e/0x50 receive_fd+0x1d/0xf0 scm_detach_fds+0xad/0x1c0 The function dereferences sock->sk->sk_family without checking if either sock or sock->sk is NULL first. Add NULL checks for both sock and sock->sk before accessing sk_family. | ||||
| CVE-2026-45967 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Return proper address for non-zero offsets in insn array The map_direct_value_addr() function of the instruction array map incorrectly adds offset to the resulting address. This is a bug, because later the resolve_pseudo_ldimm64() function adds the offset. Fix it. Corresponding selftests are added in a consequent commit. | ||||
| CVE-2026-45968 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpuidle: Skip governor when only one idle state is available On certain platforms (PowerNV systems without a power-mgt DT node), cpuidle may register only a single idle state. In cases where that single state is a polling state (state 0), the ladder governor may incorrectly treat state 1 as the first usable state and pass an out-of-bounds index. This can lead to a NULL enter callback being invoked, ultimately resulting in a system crash. [ 13.342636] cpuidle-powernv : Only Snooze is available [ 13.351854] Faulting instruction address: 0x00000000 [ 13.376489] NIP [0000000000000000] 0x0 [ 13.378351] LR [c000000001e01974] cpuidle_enter_state+0x2c4/0x668 Fix this by adding a bail-out in cpuidle_select() that returns state 0 directly when state_count <= 1, bypassing the governor and keeping the tick running. | ||||
| CVE-2026-45969 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: playstation: Add missing check for input_ff_create_memless The ps_gamepad_create() function calls input_ff_create_memless() without verifying its return value, which can lead to incorrect behavior or potential crashes when FF effects are triggered. Add a check for the return value of input_ff_create_memless(). | ||||
| CVE-2026-45970 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix UAF in rlb_arp_recv during bond up/down The ALB RX path may access rx_hashtbl concurrently with bond teardown. During rapid bond up/down cycles, rlb_deinitialize() frees rx_hashtbl while RX handlers are still running, leading to a null pointer dereference detected by KASAN. However, the root cause is that rlb_arp_recv() can still be accessed after setting recv_probe to NULL, which is actually a use-after-free (UAF) issue. That is the reason for using the referenced commit in the Fixes tag. [ 214.174138] Oops: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] SMP KASAN PTI [ 214.186478] KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] [ 214.194933] CPU: 30 UID: 0 PID: 2375 Comm: ping Kdump: loaded Not tainted 6.19.0-rc8+ #2 PREEMPT(voluntary) [ 214.205907] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.14.0 01/14/2022 [ 214.214357] RIP: 0010:rlb_arp_recv+0x505/0xab0 [bonding] [ 214.220320] Code: 0f 85 2b 05 00 00 48 b8 00 00 00 00 00 fc ff df 40 0f b6 ed 48 c1 e5 06 49 03 ad 78 01 00 00 48 8d 7d 28 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 12 05 00 00 80 7d 28 00 0f 84 8c 00 [ 214.241280] RSP: 0018:ffffc900073d8870 EFLAGS: 00010206 [ 214.247116] RAX: dffffc0000000000 RBX: ffff888168556822 RCX: ffff88816855681e [ 214.255082] RDX: 000000000000001d RSI: dffffc0000000000 RDI: 00000000000000e8 [ 214.263048] RBP: 00000000000000c0 R08: 0000000000000002 R09: ffffed11192021c8 [ 214.271013] R10: ffff8888c9010e43 R11: 0000000000000001 R12: 1ffff92000e7b119 [ 214.278978] R13: ffff8888c9010e00 R14: ffff888168556822 R15: ffff888168556810 [ 214.286943] FS: 00007f85d2d9cb80(0000) GS:ffff88886ccb3000(0000) knlGS:0000000000000000 [ 214.295966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 214.302380] CR2: 00007f0d047b5e34 CR3: 00000008a1c2e002 CR4: 00000000001726f0 [ 214.310347] Call Trace: [ 214.313070] <IRQ> [ 214.315318] ? __pfx_rlb_arp_recv+0x10/0x10 [bonding] [ 214.320975] bond_handle_frame+0x166/0xb60 [bonding] [ 214.326537] ? __pfx_bond_handle_frame+0x10/0x10 [bonding] [ 214.332680] __netif_receive_skb_core.constprop.0+0x576/0x2710 [ 214.339199] ? __pfx_arp_process+0x10/0x10 [ 214.343775] ? sched_balance_find_src_group+0x98/0x630 [ 214.349513] ? __pfx___netif_receive_skb_core.constprop.0+0x10/0x10 [ 214.356513] ? arp_rcv+0x307/0x690 [ 214.360311] ? __pfx_arp_rcv+0x10/0x10 [ 214.364499] ? __lock_acquire+0x58c/0xbd0 [ 214.368975] __netif_receive_skb_one_core+0xae/0x1b0 [ 214.374518] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 214.380743] ? lock_acquire+0x10b/0x140 [ 214.385026] process_backlog+0x3f1/0x13a0 [ 214.389502] ? process_backlog+0x3aa/0x13a0 [ 214.394174] __napi_poll.constprop.0+0x9f/0x370 [ 214.399233] net_rx_action+0x8c1/0xe60 [ 214.403423] ? __pfx_net_rx_action+0x10/0x10 [ 214.408193] ? lock_acquire.part.0+0xbd/0x260 [ 214.413058] ? sched_clock_cpu+0x6c/0x540 [ 214.417540] ? mark_held_locks+0x40/0x70 [ 214.421920] handle_softirqs+0x1fd/0x860 [ 214.426302] ? __pfx_handle_softirqs+0x10/0x10 [ 214.431264] ? __neigh_event_send+0x2d6/0xf50 [ 214.436131] do_softirq+0xb1/0xf0 [ 214.439830] </IRQ> The issue is reproducible by repeatedly running ip link set bond0 up/down while receiving ARP messages, where rlb_arp_recv() can race with rlb_deinitialize() and dereference a freed rx_hashtbl entry. Fix this by setting recv_probe to NULL and then calling synchronize_net() to wait for any concurrent RX processing to finish. This ensures that no RX handler can access rx_hashtbl after it is freed in bond_alb_deinitialize(). | ||||
| CVE-2026-45971 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Limit bpf program signature size Practical BPF signatures are significantly smaller than KMALLOC_MAX_CACHE_SIZE Allowing larger sizes opens the door for abuse by passing excessive size values and forcing the kernel into expensive allocation paths (via kmalloc_large or vmalloc). | ||||