Export limit exceeded: 374967 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (374967 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68219 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix potential out-of-bounds issues The maximum downscaling factor supported by ISI can be up to 16. Add minimum value constraint before applying the setting to hardware. Otherwise, the process will not respond even when Ctrl+C is executed. | ||||
| CVE-2026-68218 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: pci: dm1105: Free allocated workqueue Destroy allocated workqueue in remove() callback to free its resources, thus fixing memory leak. | ||||
| CVE-2026-68217 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: pwc: Drain fill_buf on start_streaming() failure pwc_isoc_init() submits its isochronous URBs with usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is submitted, its completion handler pwc_isoc_handler() can run on another CPU before the loop finishes: start_streaming() pwc_isoc_init() usb_submit_urb(urbs[0], GFP_KERNEL) pwc_isoc_handler(urbs[0]) pdev->fill_buf = pwc_get_next_fill_buf(pdev) usb_submit_urb(urbs[i>0], ..) -> fails pwc_isoc_cleanup(pdev) /* kills URBs */ return ret; pwc_cleanup_queued_bufs(pdev, VB2_BUF_STATE_QUEUED) pwc_get_next_fill_buf() detaches a buffer from pdev->queued_bufs and stores it in pdev->fill_buf. The error path in start_streaming() only drains pdev->queued_bufs, so the buffer parked in pdev->fill_buf is leaked. vb2_start_streaming() then triggers WARN_ON(owned_by_drv_count). stop_streaming() already handles this since commit 80b0963e1698 ("[media] pwc: fix WARN_ON"), which added the fill_buf drain in the teardown path but not in the start_streaming() error path. Mirror that handling on failure so start_streaming() returns with no buffer owned by the driver. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||
| CVE-2026-68216 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: pwc: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. pwc's start_streaming() had two early returns that hit this trap: -ENODEV when the USB device was already disconnected, and -ERESTARTSYS when mutex_lock_interruptible() was interrupted by a signal. Call the existing pwc_cleanup_queued_bufs() helper with VB2_BUF_STATE_QUEUED before returning (matching the state already used by the pwc_isoc_init() error path in the same function). This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68215 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: radio-si476x: Unregister v4l2_device on probe failure si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2 controls and before registering the video device. If any of those later steps fails, probe returns through the exit label after freeing only the control handler. A failed probe does not call si476x_radio_remove(), so the v4l2_device_unregister() there is not reached. This leaves the parent device reference taken by v4l2_device_register() behind on the error path. Unregister the V4L2 device in the probe error path after freeing the controls. | ||||
| CVE-2026-68214 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832: fix use-after-free in rtl2832_remove() cancel_delayed_work_sync() is called before i2c_mux_del_adapters() in rtl2832_remove(). While the cancel waits for any running instance of i2c_gate_work to finish, it does not prevent the timer from being rescheduled by a concurrent thread. During probe, the r820t_attach() call attempts I2C transfers through the mux adapter. These transfers go through i2c_mux_master_xfer(), which calls rtl2832_deselect() after the transfer completes, rescheduling i2c_gate_work via schedule_delayed_work(). If this transfer is still in flight when rtl2832_remove() runs, rtl2832_deselect() can reschedule i2c_gate_work after it has been cancelled, causing a use-after-free when kfree(dev) is called. Fix this by calling i2c_mux_del_adapters() before cancel_delayed_work_sync(). Once the mux adapter is unregistered, no new I2C transfers can go through it, so rtl2832_deselect() can no longer reschedule i2c_gate_work. The subsequent cancel_delayed_work_sync() is then guaranteed to be final. | ||||
| CVE-2026-68213 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. rtl2832_sdr_start_streaming() had multiple error paths that hit this trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six `goto err` paths covering subdev s_power, tuner setup, ADC setup, stream-buffer allocation, urb allocation, and urb submission failures. None of them returned the queued buffers. The original function had no distinct success exit and fell straight through into the err label, which previously only did mutex_unlock and "return ret". Adding queued-buffer cleanup at err must therefore be paired with an explicit success return; otherwise every successful start would also drain the buffer queue and kill streaming. Add that success return, then add rtl2832_sdr_cleanup_queued_bufs() at the err label and before each early return. The cleanup helper takes a vb2_buffer_state argument so that the start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as expected by userspace on start_streaming failure) while stop_streaming keeps its existing VB2_BUF_STATE_ERROR semantics. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). The err label still does not roll back power_ctrl(), frontend_ctrl(), the POWER_ON flag, or stream/URB allocations that may have happened before the failing step. Those are pre-existing leaks of a different class and are not addressed here. | ||||
| CVE-2026-68212 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: saa7134: Fix a possible memory leak in saa7134_video_init1 In saa7134_video_init1(), the return value of the first saa7134_pgtable_alloc() is not checked. If it fails, the function continues as if successful, leaving the driver with an invalid page table. Additionally, if vb2_queue_init() for the VBI queue fails after the video queue page table has been allocated, the allocated memory is not freed before returning. The second saa7134_pgtable_alloc() also lacks a return value check. Errors occur during device probing before the device is fully registered, the normal cleanup path in saa7134_finidev() is not executed, leading to memory leaks and potential use of uninitialized DMA resources. Check the return value of both saa7134_pgtable_alloc() calls and propagate errors. On failure of any later step, free allocated page tables to avoid memory leaks. Ensure control handlers are also released on error to prevent further resource leakage. Found by code review. | ||||
| CVE-2026-68211 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: stm32-dcmipp: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. dcmipp_bytecap_start_streaming() returned -EINVAL when the source subdevice could not be resolved from the media graph, before pm_runtime_resume_and_get() and media_pipeline_start() had been called. The remaining error paths already converge on the err_buffer_done label, which calls dcmipp_bytecap_all_buffers_done(..., VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate err_pm_put / err_media_pipeline_stop labels are skipped, which is correct because nothing they would undo has happened yet. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68210 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: stm32: dcmi: unregister notifier on probe failure dcmi_graph_init() registers the async notifier before dcmi_probe() toggles the reset line. If reset_control_assert() or reset_control_deassert() fails afterwards, probe returns through err_cleanup and the driver core will not call dcmi_remove(). Unregister the notifier before cleaning it up on that error path, matching the successful remove path and the V4L2 async notifier lifetime rules. [hverkuil: added Fixes tag] | ||||
| CVE-2026-68209 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: sun4i-csi: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. sun4i_csi_start_streaming() returned -EINVAL when no matching CSI format could be found, before any setup (scratch buffer allocation, pipeline start) had been performed. The remaining error paths already converge on the err_clear_dma_queue label, which calls return_all_buffers(..., VB2_BUF_STATE_QUEUED) under csi->qlock. Jump to that label directly: the intermediate err_disable_device / err_disable_pipeline / err_free_scratch_buffer labels are skipped, which is correct because nothing they would undo has happened yet. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68208 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: ti: vpe: Fix the error code of devm_kzalloc() in vip_probe_slice() In vip_probe_slice(), the error check for devm_kzalloc() incorrectly uses PTR_ERR_OR_ZERO() which returns 0 for NULL pointer. Return -ENOMEM for devm_kzalloc() failure. | ||||
| CVE-2026-68207 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: ti: vpe: unwind v4l2 device registration on probe error If the vpe_top resource is missing, vpe_probe() returns -ENODEV after v4l2_device_register() has succeeded. Probe failures do not call the driver's remove callback, so the v4l2 device remains registered on that error path. Route that failure through the existing v4l2_device_unregister() unwind label, matching the other errors after v4l2_device_register(). | ||||
| CVE-2026-68206 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC active reference counts HEVC slice parameters are shared stateless V4L2 controls, but the common validation path does not verify the active L0/L1 reference counts before driver-specific code consumes them. The original report came from Cedrus, but the active count bounds are not Cedrus-specific. Validate them in the common HEVC slice control path so stateless HEVC drivers get the same basic guarantees as soon as the control is queued. Do not reject ref_idx_l0/ref_idx_l1 entries here. Existing userspace may use out-of-range sentinel values such as 0xff for missing references, and some hardware can use that information for concealment. Keep this common check limited to the active reference counts. | ||||
| CVE-2026-68205 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor() The v4l2 helper v4l2_async_register_subdev_sensor() calls v4l2_async_register_subdev(), which is a macro that expands to __v4l2_async_register_subdev(sd,THIS_MODULE). Since the macro is expanded inside v4l2-fwnode.c, THIS_MODULE resolves to the v4l2-fwnode module rather than the sensor driver module that originally set sd->owner. When v4l2-fwnode is built-in, THIS_MODULE evaluates to NULL, which then overwrites the sensor driver's owner with NULL. This causes the problem that the sensor module's reference count is never incremented during async registration, so the module can be removed while the subdevice is still in use by a notifier (e.g., a CSI-2 receiver bridge driver). Fix this by renaming v4l2_async_register_subdev_sensor() to __v4l2_async_register_subdev_sensor() with an added explicit module argument and introducing a wrapper macro: #define v4l2_async_register_subdev_sensor(sd) \ __v4l2_async_register_subdev_sensor(sd, THIS_MODULE) This ensures the sensor driver module is properly referenced even when the sensor driver does not init the owner field before calling v4l2_async_register_subdev_sensor() and prevents premature module removal. | ||||
| CVE-2026-68204 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: vivid: check for vb2_is_busy() when toggling caps The vivid_update_format_cap/out() functions must only be called if the capture/output queue are not busy. But for the controls that select the CROP/COMPOSE/SCALE capability that is not checked. Only when streaming starts will they be set to 'grabbed' and it is impossible to change the control, but between REQBUFS and STREAMON you are still allowed to set these controls. Since vivid_update_format_cap/out will change the format, this can cause unexpected results. Besides adding these checks, also add a WARN_ON in vivid_update_format_cap/out() if the queue is busy. I'm 90% certain that this is the cause of this syzbot bug: https://syzkaller.appspot.com/bug?extid=dac8f5eaa46837e97b89 But since we never have reproducers, it is hard to be certain. In any case, these checks are needed regardless. | ||||
| CVE-2026-68203 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix cleanup bugs in vivid_init() When platform_device_register() fails in vivid_init(), the embedded struct device in vivid_pdev has already been initialized by device_initialize(), but the failure path jumps to free_output_strings without dropping the device reference for the current platform device: vivid_init() -> platform_device_register(&vivid_pdev) -> device_initialize(&vivid_pdev.dev) -> setup_pdev_dma_masks(&vivid_pdev) -> platform_device_add(&vivid_pdev) This leads to a reference leak when platform_device_register() fails. Fix this by calling platform_device_put() before jumping to the common cleanup path. Also, the unreg_driver label incorrectly calls platform_driver_register() instead of platform_driver_unregister(), which breaks cleanup when workqueue creation fails after successful driver registration. Fix that as well. The reference leak was identified by a static analysis tool I developed and confirmed by manual review. The incorrect cleanup call was found during code inspection. | ||||
| CVE-2026-68202 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: close a re-opened queue timer in the destructor queue_delete() closes the queue timer, then frees it. snd_seq_timer_close() clears q->timer->timeri. snd_use_lock_sync() then drains borrowers, and snd_seq_timer_delete() frees q->timer. A borrower can re-open the timer inside that window. A SET_QUEUE_CLIENT that took a queueptr() use_lock reference before the queue was unlinked runs snd_seq_timer_open() after the close. Open refuses re-open only while timeri is set, and the close just cleared it, so it re-opens timeri. snd_seq_timer_delete() does not close that instance. Its snd_seq_timer_stop() is a no-op, because running was cleared first. So it frees q->timer with the instance still live. The queue is freed next. The instance stays on the global timer with callback_data pointing at the freed queue. A non-owner START on the unlocked queue arms it. The next tick derefs the freed queue in snd_seq_timer_interrupt(). Reachable by an unprivileged user with access to /dev/snd/seq. No CAP and no queue ownership required. Close any lingering instance in the destructor. There, ->timeri can no longer change: the queue is unlinked and all use_lock borrowers have drained, so no snd_seq_queue_use() can re-open it. Close it before clearing q->timer. snd_timer_close() waits for any in-flight snd_seq_timer_interrupt() to finish, and that callback still reads q->timer (via snd_seq_check_queue()), so q->timer must stay valid until it drains. | ||||
| CVE-2026-68201 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: drain a slave's callback before its master detaches it snd_timer_close_locked() drains the closing instance's own in-flight callback (IFLG_CALLBACK) before freeing it, but not its slaves'. When a master instance is closed, remove_slave_links() clears each slave's ->timer; the slave's own close then reads timer == NULL and takes the branch that skips the drain entirely (snd_timer_stop_slave() also no-ops on a NULL timer). So a slave whose callback is still running when the master is closed is freed underneath the live callback, leading to use-after-free. Drain the slaves too before remove_slave_links() severs them. snd_timer_stop() has already taken this instance off the active list, so no new slave callback can be queued. Take the slaves off the ack list so a pending one can't fire either, then wait for any that is already in flight. | ||||
| CVE-2026-68200 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: don't re-enter an instance callback that is still running The userspace-driven timer (utimer) TRIGGER ioctl calls snd_timer_interrupt() directly with no serialization, so two threads triggering the same utimer can run snd_timer_interrupt() on one snd_timer concurrently. snd_timer_process_callbacks() drops timer->lock around each instance callback and marks the in-flight callback with the single SNDRV_TIMER_IFLG_CALLBACK bit; snd_timer_close_locked() waits on that bit to drain an in-flight callback before freeing the instance. The bit cannot represent two concurrent callbacks: when a second interrupt re-queues an instance whose callback is still running, both run at once, the first to finish clears the bit, and the close-path drain then frees the instance (and its callback_data) while the other callback is still live - a use-after-free reachable by any user able to open /dev/snd/timer, both via a user timer instance and via a sequencer queue timer bound to the utimer. snd_timer_interrupt() sets IFLG_CALLBACK before dropping timer->lock, so a concurrent interrupt already observes it under the lock. Skip re-queuing an instance (and its slaves) to the ack/sack list while its callback is in flight; the accumulated pticks are delivered on the next tick, so no event is lost. | ||||