Export limit exceeded: 390780 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390780 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89528 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Read lists that exceed the page budget Individual Read segment lengths are validated at decode time, but nothing prevents a requester from sending multiple segments whose cumulative length exceeds the rq_pages array budget. When one segment fills the page array exactly, the runtime guard in svc_rdma_build_read_segment() is bypassed because len reaches zero. A subsequent segment then accesses the NULL sentinel slot at rq_pages[rq_maxpages], resulting in a NULL pointer dereference during DMA mapping. Accumulate pages across all Read segments and reject the message at decode time when the total would overflow the page budget. | ||||
| CVE-2026-89526 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Validate Read chunk positions before reconstruction The RPC/RDMA Read chunk position field is supplied by the remote client and stored verbatim in the parsed chunk list. xdr_count_read_segments() checks only 4-byte alignment; it never compares the position against the received inline body length. In the single-chunk path, svc_rdma_read_complete_one() splits the head and tail kvecs at ch_position. A position past the inline body underflows the tail length, exposing adjacent slab memory to the upper XDR decoder. In the multi-chunk path, svc_rdma_read_multiple_chunks() computes gap lengths between chunks as unsigned subtractions from ch_position. Overlapping Read chunks cause these subtractions to underflow. A final position past the inline body likewise underflows the trailing gap length. svc_rdma_copy_inline_range() then copies past the receive buffer into request pages that are returned to the client through the Reply channel. Bound inline-range copies in svc_rdma_copy_inline_range() against the decoded inline RPC body saved in rc_saved_arg. Reject a single Read chunk positioned beyond that body, and reject multi-chunk lists where accumulated read bytes exceed the next chunk's position. Apply the same position and overlap checks in the call-chunk interleaving path. | ||||
| CVE-2026-89524 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: clamp assoc request/response lengths before subtracting IE offsets ath6kl_cfg80211_connect_event() subtracts fixed IE offsets from assoc_req_len (-= 4) and assoc_resp_len (-= 6), both u8, with no lower bound. The aggregate check recently added to ath6kl_wmi_connect_event_rx() bounds the declared lengths from above (their sum must fit the received event), but an assoc request/response shorter than its fixed offset still underflows here: the u8 wraps to ~250, and cfg80211_connect_result() / cfg80211_roamed() then treat that wrapped value as the IE length and copy that many bytes out of the small assoc_info buffer to user space via nl80211, disclosing adjacent slab memory. Clamp both lengths to their offsets before subtracting. Found by 0sec (https://0sec.ai) using automated source analysis; the missing lower bound is evident from source. Compile-tested. | ||||
| CVE-2026-89523 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: cancel pending mlo_pm_work If the device is reset, suspended or unregistered within that window, the pending work can still run and access vif/bss data that may already be freed, or send MCU commands while the firmware is not available. Add cancel_delayed_work_sync(&dev->mlo_pm_work) in all relevant teardown and suspend paths: - mt7925_mac_reset_work() (chip reset recovery) - mt7925e_unregister_device() (PCIe unbind) - mt7925_pci_suspend() (PCIe bus suspend) - mt7925_suspend() (mac80211 suspend) - mt7925u_suspend() (USB bus / runtime suspend) This ensures the work is stopped before the device state becomes invalid. | ||||
| CVE-2026-89522 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: staging/ipu7: fix async notifier UAF on probe error path isys_register_devices() registers the V4L2 async notifier via isys_notifier_init(). If a subsequent probe step such as isys_fw_log_init() fails, isys_probe() jumps to the out_cleanup label which only calls isys_unregister_devices(). That helper tears down the video devices, subdevices, V4L2 device and media device, but never unregisters or cleans up the async notifier. As a result the notifier stays chained in the global notifier_list while the enclosing struct ipu7_isys is freed by devres, leading to list corruption and a use-after-free the next time the list is walked. The remove path already does the right thing by calling isys_notifier_cleanup() before isys_unregister_devices(). Mirror that on the probe error path so the notifier is unregistered and cleaned up before the device is torn down. | ||||
| CVE-2026-89521 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: sched/core: Handle pick_task() releasing the rq lock Core scheduling's pick_next_task() breaks when a ->pick_task() implementation can release the rq lock. The selection state derived on entry is only valid while the lock is held continuously. Once a pick can drop the lock, an interleaving selection can invalidate all of it: the single-CPU fast path can commit an uncookied pick although the core went cookied during the release, and forceidle committed by the interleaving selection skews the restarted pass's accounting. Fix it by restarting the whole selection when a pick returns RETRY_TASK after releasing the lock: a single restart point above the state derivation replaces the per-loop restart labels, so a retry picks up state committed by interleaving selections and accounts and resets forceidle like a fresh selection would. need_sync and fi_before latch across retries. Clock validity can't be re-derived - there is no program-ordered way to tell whether the own and core rq clocks are still updated after the lock was released, as other lockers' pin cycles may or may not have invalidated them. When restarting, clear core_clock_updated so that the sibling loop re-updates the core rq, and update the own rq clock if invalidated. | ||||
| CVE-2026-89520 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sched/core: Make core-sched flips wait for in-flight selections Core scheduling's pick_next_task() operates on all sibling rqs under one acquisition of the shared core-wide lock. A ->pick_task() that releases the rq lock leaves every sibling __lock momentarily free, letting __sched_core_flip(false) complete mid-selection and rebind rq_lockp() under it. The selection resumes on the split locks, touching sibling state it no longer protects, and __schedule() finally releases a lock that was never taken while leaking the one that was. Count in-flight core-wide selections in the leader's rq->core_pick_in_flight and make __sched_core_flip() wait for the count to drain. The count only changes under the shared lock, which the flip holds while sampling, so no other ordering is needed. The wait can repeat while selections overlap, but the flip backs off between samples and flips are rare cookie-lifetime events. sched_core_cpu_deactivate() moves the count to the new leader - a stale copy left behind would bias it forever if that CPU later returns as its own leader. | ||||
| CVE-2026-89513 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Fix PMU event info array size overflow SBI PMU EVENT_GET_INFO stores guest-controlled num_events * sizeof(*einfo) in a 32-bit integer. On RV64, num_events = 0x10000001 makes 0x100000010 truncate to 16. KVM then allocates one entry but loops over the original num_events, causing out-of-bounds reads and writes. A nested guest triggered: BUG: KASAN: slab-out-of-bounds in kvm_riscv_vcpu_pmu_event_info+0xa4/0x142 Read of size 4 at addr ff600000074d46b0 by task init/1 Call Trace: [<ffffffff8006471c>] kvm_riscv_vcpu_pmu_event_info+0xa4/0x142 [<ffffffff800690c0>] kvm_sbi_ext_pmu_handler+0xca/0x268 [<ffffffff8006779e>] kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6 [<ffffffff8006008c>] kvm_riscv_vcpu_exit+0x48c/0x540 [<ffffffff8005ea0a>] kvm_arch_vcpu_ioctl_run+0x37e/0xc80 Allocated by task 1: __kmalloc_noprof+0x19e/0x4b0 kvm_riscv_vcpu_pmu_event_info+0x72/0x142 kvm_sbi_ext_pmu_handler+0xca/0x268 kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6 kvm_riscv_vcpu_exit+0x48c/0x540 kvm_arch_vcpu_ioctl_run+0x37e/0xc80 The buggy address is located 0 bytes to the right of allocated 16-byte region [ff600000074d46a0, ff600000074d46b0) Store the shared-memory size in size_t and reject multiplication overflow. Allocate the guest-driven array with GFP_KERNEL_ACCOUNT so it is charged to kmemcg, and use __GFP_NOWARN to suppress allocation failure warnings. Use kvcalloc() to allow vmalloc fallback and an unsigned long loop index to match num_events. | ||||
| CVE-2026-89436 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: panasonic-laptop: Fix sentinel write past pcc->sinf[] acpi_pcc_retrieve_biosdata() rejects SINF packages only when pcc->num_sifr is strictly less than hkey->package.count, then unconditionally writes a trailing sentinel at pcc->sinf[hkey->package.count]. But pcc->sinf[] is allocated with exactly pcc->num_sifr elements (valid indices 0..num_sifr-1), so that write needs num_sifr strictly greater than package.count to stay in bounds -- num_sifr == package.count passes the existing check but still overflows by one element. This is exactly the case probe()'s existing num_sifr++ workaround ("Some DSDT-s have an off-by-one bug where the SINF package count is one higher than the SQTY reported value") is written to accommodate: when a DSDT's SINF package count equals SQTY+1, the workaround makes num_sifr equal to package.count, which is precisely the boundary that overflows here. Found via UBSan (array-index-out-of-bounds) on hardware where HKEY.SQTY returns 37 and HKEY.SINF()'s package has 38 elements: num_sifr becomes 38 after the += 1 workaround, the loop correctly fills indices 0..37, and the sentinel write then targets index 38, one past the end -- a silent 4-byte heap overflow on kernels without CONFIG_UBSAN. Tightening the rejection check to num_sifr <= package.count would avoid the overflow but breaks probe() entirely on exactly this hardware, since num_sifr == package.count is the case the off-by-one workaround exists to support. Nothing else in the driver reads this sentinel value back, so simply skip the write when there is no room for it instead. | ||||
| CVE-2026-89511 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: qede: Fix NULL pointer dereference in TPA fragment processing Under memory pressure, the qede driver encounters NULL pointer dereferences when processing TPA continuation fragments. Commit 8a8633978b84 ("qede: Add build_skb() support.") accidentally dropped the assignment of tpa_info->buffer.data in qede_tpa_start(). When memory pressure causes an SKB allocation failure in qede_tpa_start(), the driver sets tpa_start_fail = true and attempts to recycle the physical page later in qede_tpa_end() via qede_reuse_page(). However, because buffer.data was left uninitialized (NULL), qede_reuse_page() pushes a "ghost" BD (valid DMA mapping but NULL data pointer) back into the active Rx ring. The next time the hardware uses this ring slot, it passes a NULL page to qede_fill_frag_skb(), causing a kernel panic. Example crash from production system: BUG: unable to handle kernel NULL pointer dereference at 0x8 RIP: qede_fill_frag_skb+0x96/0x430 [qede] Call Trace: qede_rx_int+0xb06/0x1de0 qede_poll+0x2f4/0x6c0 __napi_poll+0x2d/0x130 Fix the root cause by restoring the tpa_info->buffer.data assignment in qede_tpa_start(), ensuring valid pages are correctly tracked and recycled. Additionally, update the stale comment for struct qede_agg_info::buffer to reflect its current usage. | ||||
| CVE-2026-89510 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Cancel reg_work before freeing device on remove c4iw_uld_state_change() queues reg_work to register the RDMA device. c4iw_remove() can free ctx->dev while this work is pending or running, leaving c4iw_register_device() accessing the freed device. Cancel reg_work before removing the device. The registration work can tear down ctx->dev when registration fails, so do not unregister or deallocate it again in that case. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89508 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Lock the handler in ucma_set_ib_path() ucma_set_ib_path() calls ucma_event_handler() straight from the write() path, without the handler lock that keeps ctx->file stable while a uevent is queued. The handler re-reads ctx->file for every dereference: mutex_lock(&ctx->file->mut); /* file A */ list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */ mutex_unlock(&ctx->file->mut); /* file B */ wake_up_interruptible(&ctx->file->poll_wait); /* file B */ A concurrent ucma_migrate_id() reassigns ctx->file while the SET_OPTION caller sleeps in mutex_lock(), so the list_add_tail() lands on file B's event_list while only file A's mutex is held, racing every other user of that list: BUG: KASAN: slab-use-after-free in __list_add_valid_or_report+0x1aa/0x1c0 Read of size 8 at addr ffff888153c6a418 by task poc_corr/486 Call Trace: __list_add_valid_or_report+0x1aa/0x1c0 ucma_event_handler+0x1be/0xc00 ucma_set_ib_path+0x45e/0x710 ucma_set_option+0x32e/0x590 ucma_write+0x1f9/0x330 Allocated by task 505: ucma_write_cm_event+0x1a1/0x660 Freed by task 505: kfree+0x1da/0x4c0 ucma_get_event+0x5d5/0x7e0 The freed object is a ucma_event that another thread dequeued from file B's list under file B's mutex. File A's mut is left held on top of that, wedging its next writer in uninterruptible sleep. This path needs a bound and address-resolved cm_id, so it requires an RDMA device to be present. Take the handler lock around the call. | ||||
| CVE-2026-89507 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Lock the handler in ucma_write_cm_event() ctx->file may only be changed under the handler lock and the xa_lock, which is what stops uevents being queued for a ctx while ucma_migrate_id() moves it to another file. The CM core takes that lock before invoking ucma_event_handler(), but the write() paths that queue uevents themselves do not. ucma_write_cm_event() re-reads ctx->file for each of its four dereferences, so ucma_migrate_id() can swap it mid-sequence: mutex_lock(&ctx->file->mut); /* file A */ list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */ mutex_unlock(&ctx->file->mut); /* file B */ wake_up_interruptible(&ctx->file->poll_wait); /* file B */ The window is the mutex_lock() itself: the writer sleeps in it while the migration reassigns ctx->file. The list_add_tail() then runs on file B's event_list holding only file A's mutex: list_add corruption. prev->next should be next (ffff888101320f30), but was ffff88814a08c418. (prev=ffff88814a075c18). kernel BUG at lib/list_debug.c:32! Call Trace: ucma_write_cm_event+0x36e/0x5e0 and file A's mut is left held forever, wedging its next writer in D state. The uevent is also stranded on a list ucma_cleanup_ctx_events() will not walk, so it outlives its context. /dev/infiniband/rdma_cm is 0666 and no RDMA device is involved, so an unprivileged user reaches all of this. Take the handler lock, as ucma_cleanup_mc_events() does; ctx->cm_id is pinned by the ucma_get_ctx() reference. | ||||
| CVE-2026-89504 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: as3722_get_regulator_dt_data: fix premature of_node_put leaving dangling of_node pointer In as3722_get_regulator_dt_data(), of_get_child_by_name() acquires a reference on np, which is then assigned to pdev->dev.of_node. The function immediately calls of_node_put(np), releasing the reference and leaving pdev->dev.of_node as a dangling pointer. Remove the of_node_put(np) call to let the device hold the reference. | ||||
| CVE-2026-89503 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix subbuf resize race with ring_buffer_alloc_read_page() ring_buffer_alloc_read_page() is racy with ring_buffer_subbuf_order_set, it can allocate a reader page with an outdated order. This isn't a big issue, the user can still re-allocate a new reader page and try again. However, what is more problematic is if the value of subbuf_order changes in the middle of ring_buffer_alloc_read_page(). In that case, bpage->order might not match the actual allocated memory. Use bpage->order for the allocation to prevent this race. | ||||
| CVE-2026-89501 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Hold cpu_buffer::lock when resizing a subbuf Because, ring_buffer_subbuf_order_set() can clear cpu_buffer->free_page, hold cpu_buffer->lock to prevent races with ring_buffer_alloc_read_page() and ring_buffer_free_read_page(). | ||||
| CVE-2026-89500 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Make cpu_buffer::free_page a buffer_data_read_page Discarding a cached reader page after a concurrent ring buffer resize uses the new global subbuf_order for the free_pages() call. This mismatched order may crashes the kernel or leaks memory because the cached page was allocated under the old size. Save the actual free_page order alongside the page address to ensure we always refer to the correct value and do not rely on the potentially stalled cpu_buffer->subbuf_order value. The simplest is to make free_page a buffer_data_read_page which already covers exactly what we need: a page address and a page order. | ||||
| CVE-2026-89499 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Stop remote reader update when page swap fails The remote swap_reader_page callback can return -EBUSY when the writer moves the head before the remote catches it, particularly during an event storm on a small buffer. __rb_get_reader_page_from_remote() currently warns about that failure but continues with the unchanged reader ID and rearranges the local page list as though the swap succeeded. Handle the callback failure as a recoverable error. Report it with pr_warn_ratelimited() and return NULL. Callers already handle a NULL reader page as a failed attempt. This avoids splicing the same page as both the previous and new reader without flooding the log under contention. | ||||
| CVE-2026-89497 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: orangefs: skip leading spaces before parsing client debug masks orangefs_prepare_cdm_array() sizes each client debug keyword buffer with strcspn(cds_head, " "), but then parses the keyword with %s. The %s conversion skips leading whitespace, while strcspn() does not. If a client debug entry starts with a space, the allocation can be sized for an empty keyword while sscanf() copies the following non-empty token. This can write past the end of the allocated keyword buffer. Skip leading spaces before computing the keyword length so the allocation matches the string parsed by sscanf(). | ||||
| CVE-2026-89495 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: bound namelen in dlm_migrate_request_handler Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm". The o2dlm receive handlers trust u8 length and count fields from the wire without bounding them, so a node in a DLM domain can corrupt or panic any other node with a malformed message. Three defects: - dlm_migrate_request_handler() passes migrate->namelen unchecked to dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an o2dlm_mle slab object: a heap out-of-bounds write of up to ~215 attacker-controlled bytes. - dlm_mig_lockres_handler() passes mres->lockname_len unchecked to dlm_init_lockres(), which memcpy()s it into the 32-byte o2dlm_lockname slab object: a heap out-of-bounds write of up to ~223 bytes. - the same handler trusts mres->num_locks without checking that the message is large enough to hold that many entries, so dlm_process_recovery_data() walks mres->ml[] past the kmalloc(data_len) copy and trips a BUG_ON (an out-of-bounds read ending in a panic). The other o2dlm receive handlers already reject an oversized name; the migration and recovery handlers have omitted it since the DLM was added (see the Fixes tags). Patch 1 bounds namelen; patch 2 validates lockname_len, num_locks, and the payload size. Conforming recovery and migration traffic is unaffected. o2net authenticates peers only by the DLM domain key, so any node that has joined the domain -- including a compromised or malicious member -- can send these messages. There is no local trigger; the attacker must already be a member of the cluster. Each sink was confirmed under KASAN with an out-of-tree module mirroring it exactly -- a kmem_cache/kmalloc of the real destination size, then the same unclamped memcpy/loop: slab-out-of-bounds Write for the two writes, Read for the recovery walk, and a panic. A userspace AddressSanitizer build faults identically under -m32 and -m64. Scrubbed logs are available on request. I reported this privately to security@kernel.org and the ocfs2 maintainers on 2026-06-20; with no response after the standard embargo period I am posting the fix publicly. I have no embargo requirement. This patch (of 2): A node receiving a DLM_MIGRATE_REQUEST message trusts the peer-supplied name length (migrate->namelen) without bounding it. dlm_init_mle() then copies that many bytes into the fixed DLM_LOCKID_NAME_MAX-byte mname[] array of an o2dlm_mle slab object, so a malformed message from a cluster peer overflows the slab object by up to ~215 bytes: a heap out-of-bounds write of attacker-controlled data, reachable by any node in the domain. Reject an oversized name, the way dlm_master_request_handler() and the other o2dlm receive handlers already do; the migration handler omits the check entirely. Conforming messages are unaffected. | ||||