Export limit exceeded: 35583 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (35583 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46177 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: Add limits to event and receive message requests The driver would just fetch events and receive messages until the BMC said it was done. To avoid issues with BMCs that never say they are done, add a limit of 10 fetches at a time. In addition, an si interface has an attn state it can return from the hardware which is supposed to cause a flag fetch to see if the driver needs to fetch events or message or a few other things. If the attn bit gets stuck, it's a similar problem. So allow messages in between flag fetches so the driver itself doesn't get stuck. This is a more general fix than the previous fix for the specific bad BMC, but should fix the more general issue of a BMC that won't stop saying it has data. This has been there from the beginning of the driver. It's not a bug per-se, but it is accounting for bugs in BMCs. | ||||
| CVE-2026-46172 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm6: release dst on error in xfrm6_rcv_encap() xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not already have a dst attached. ip6_route_input_lookup() returns a referenced dst entry even when the lookup resolves to an error route. If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching the dst to the skb and without releasing the reference returned by the lookup. Repeated packets hitting this path therefore leak dst entries. Release the dst before jumping to the drop path. | ||||
| CVE-2026-46229 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Clear VRAM on allocation to prevent stale data exposure KFD VRAM allocations set AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE but not AMDGPU_GEM_CREATE_VRAM_CLEARED, leaving freshly allocated VRAM with stale data from prior use observable by compute kernels. The GEM ioctl path already sets VRAM_CLEARED for all userspace allocations via amdgpu_gem_create_ioctl() and amdgpu_mode_dumb_create(). The KFD path was missing this flag, allowing stale page table remnants to leak into user buffers. This causes crashes in RCCL P2P transport where non-zero data in ptrExchange/head/tail fields corrupts the protocol handshake. | ||||
| CVE-2026-46231 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: put backbone reference on failed claim hash insert When batadv_bla_add_claim() fails to insert a new claim into the hash, it leaked a reference to the backbone_gw for which the claim was intended. Call batadv_backbone_gw_put() on the error path to release the reference and avoid leaking the backbone_gw object. | ||||
| CVE-2026-46232 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: playstation: Clamp num_touch_reports A device would never lie about the number of touch reports would it? If it does the loop in dualshock4_parse_report will read off the end of the touch_reports array, up to about 2 KiB for the maximum number of 256 loop iteraions. The data that is read is emitted via evdev if the DS4_TOUCH_POINT_INACTIVE bit happens to be set. Protect against this by clamping the num_touch_reports value provided by the device to the maximum size of the touch_reports array. | ||||
| CVE-2026-46236 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: rc: xbox_remote: heed DMA restrictions The buffer for IO must not be part of the device structure because that violates the DMA coherency rules. | ||||
| CVE-2026-46174 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache Make sure resources are not improperly shared in the op cache and cause instruction corruption this way. | ||||
| CVE-2026-45776 | 2 Buffalo, Ubccr | 2 Open Xdmod, Xdmod | 2026-06-10 | 4.3 Medium |
| OpenXDMoD is an open framework for collecting and analyzing HPC metrics. Prior to version 11.0.3, a flaw in Open XDMoD's access control logic allows an attacker to submit a crafted HTTPS POST request that sets a session variable used for authorization decisions. If an installation of Open XDMoD includes the optional Job Performance (SUPReMM) module, an attacker could bypass intended data access restrictions and view other users' compute job efficiency metrics. All deployments of Open XDMoD prior to version 11.0.3 that contain the optional Job Performance (SUPReMM) module are impacted. This issue was reported privately on 2026-04-06, and at this time there is no evidence that this vulnerability has been exploited in the wild. The vulnerability was patched in Open XDMoD 11.0.3 on 2026-05-12. As a workaround, apply the patch manually. | ||||
| CVE-2026-46238 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop caching unowned originator pointers in BAT IV BAT IV keeps the last-hop neighbor address in each neigh_node, but some paths also cache an originator pointer derived from a temporary lookup. That pointer is not owned by the neigh_node and may no longer refer to a live originator entry after purge handling runs. Stop storing the auxiliary originator pointer in the BAT IV neighbor state. When BAT IV needs the neighbor originator data, resolve it from the stored neighbor address and drop the reference again after use. [sven: avoid bonding logic for outgoing OGM] | ||||
| CVE-2026-45658 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-06-10 | 7.8 High |
| Protection mechanism failure in Windows BitLocker allows an unauthorized attacker to bypass a security feature with a physical attack. | ||||
| CVE-2026-4447 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-10 | 8.8 High |
| Inappropriate implementation in V8 in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-11666 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-10 | 5.4 Medium |
| Insufficient validation of untrusted input in Input in Google Chrome prior to 149.0.7827.103 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-11658 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-10 | 6.5 Medium |
| Insufficient validation of untrusted input in Extensions in Google Chrome prior to 149.0.7827.103 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-11689 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-10 | 8.1 High |
| Insufficient policy enforcement in Passwords in Google Chrome prior to 149.0.7827.103 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-46206 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject new tp_meter sessions during teardown Prevent tp_meter from starting new sender or receiver sessions after mesh_state has left BATADV_MESH_ACTIVE. | ||||
| CVE-2026-46218 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Add bounds checking to ib_{get,set}_value The uvd/vce/vcn code accesses the IB at predefined offsets without checking that the IB is large enough. Check the bounds here. The caller is responsible for making sure it can handle arbitrary return values. Also make the idx a uint32_t to prevent overflows causing the condition to fail. | ||||
| CVE-2026-46226 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: fsl: fix controller deregistration Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind. | ||||
| CVE-2026-46225 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: rspi: fix controller deregistration Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind. | ||||
| CVE-2026-11682 | 2 Google, Linux | 2 Chrome, Linux Kernel | 2026-06-10 | 8.3 High |
| Inappropriate implementation in Views in Google Chrome on Linux prior to 149.0.7827.103 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-46202 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: run inactivity autodim from workqueues The autodim code in hid-appletb-kbd takes backlight_device->ops_lock via backlight_device_set_brightness() -> mutex_lock() from two different atomic contexts: * appletb_inactivity_timer() is a struct timer_list callback, so it runs in softirq context. Every expiry triggers BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 Call Trace: <IRQ> __might_resched __mutex_lock backlight_device_set_brightness appletb_inactivity_timer call_timer_fn run_timer_softirq * reset_inactivity_timer() is called from appletb_kbd_hid_event() and appletb_kbd_inp_event(). On real USB hardware these run in softirq/IRQ context (URB completion and input-event dispatch). When the Touch Bar has already been dimmed or turned off, the reset path calls backlight_device_set_brightness() directly to restore brightness, producing the same warning. Both call sites hit the same mutex_lock()-from-atomic bug. Fix them together by moving the blocking work onto the system workqueue: * Convert the inactivity timer from struct timer_list to struct delayed_work; the callback (appletb_inactivity_work) now runs in process context where mutex_lock() is legal. * Add a dedicated struct work_struct restore_brightness_work and have reset_inactivity_timer() schedule it instead of calling backlight_device_set_brightness() directly. Cancel both works synchronously during driver tear-down alongside the existing backlight reference drop. The semantics are unchanged (same delays, same state transitions on dim, turn-off and user activity); only the execution context of the sleeping call changes. The timer field and callback are renamed to match their new type; reset_inactivity_timer() keeps its name because it is invoked from input event paths that read naturally as "reset the inactivity timer". | ||||