Export limit exceeded: 361533 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (361533 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-52917 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: diag: reject stale associations in dump_one path The SCTP exact sock_diag lookup can hold a transport reference, block on lock_sock(sk), and then resume after sctp_association_free() has marked the association dead and freed its bind address list. When that happens, inet_assoc_attr_size() and inet_diag_msg_sctpasoc_fill() can still dereference association state that is no longer valid for reporting. In particular, inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a real sctp_sockaddr_entry and trigger an out-of-bounds read from unrelated association memory. Reject the association after taking the socket lock if it has been reaped or detached from the endpoint, and report the lookup as stale. This keeps the exact dump-one path from formatting torn association state. | ||||
| CVE-2026-52915 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_hbh: reject oversized option lists struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors, but hbh_mt6_check() does not reject larger optsnr values supplied from userspace. Validate optsnr in the rule setup path so only match data that fits the fixed-size opts array can be installed. This follows the existing xtables pattern of rejecting invalid user-provided counts in checkentry() and keeps the packet matching path unchanged. `struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array, where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible: [ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29 [ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]' | ||||
| CVE-2026-52914 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix fragment reassembly length accounting batman-adv keeps a running payload length for queued fragments and uses it to validate a fragment chain before reassembly. That accounting currently allows the accumulated fragment length to be truncated during updates. As a result, malformed fragment chains can bypass the intended validation and drive reassembly with inconsistent length state, leading to a local denial of service. Fix the accounting by storing the accumulated length in a length-typed field and rejecting update overflows before the existing validation logic runs. The fix was verified against the original reproducer and against valid fragment reassembly paths. | ||||
| CVE-2026-52912 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: hold bridge skb->dev while queued br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge master before queueing bridge LOCAL_IN packets. NFQUEUE only holds references on state.in/out and bridge physdevs, so a queued bridge packet can retain a freed bridge master in skb->dev until reinjection. When the verdict is reinjected later, br_netif_receive_skb() re-enters the receive path with skb->dev still pointing at the freed bridge master, triggering a use-after-free. Store skb->dev in the queue entry, hold a reference on it for the queue lifetime, and use the saved device when dropping queued packets during NETDEV_DOWN handling. | ||||
| CVE-2026-52911 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: scope conn->binding slowpath to bound sessions only When the binding SESSION_SETUP sets conn->binding = true, the flag stays set after the call so that the global session lookup in ksmbd_session_lookup_all() can find the session, which was not added to conn->sessions. Because the flag is connection-wide, the global lookup path will also resolve any other session by id if asked. Tighten the global lookup so that the returned session must have this connection registered in its channel xarray (sess->ksmbd_chann_list). The channel entry is installed by the existing binding_session path in ntlm_authenticate()/krb5_authenticate() when a SESSION_SETUP completes successfully, so this condition is a strict equivalent of "this connection has been accepted as a channel of this session". Connections that have not bound to a given session cannot reach it via the global table. The existing conn->binding gate for entering the slowpath is preserved so that non-binding connections keep the fast-path-only behavior, and the session->state check is unchanged. | ||||
| CVE-2026-52910 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Free reuseport cBPF prog after RCU grace period. Eulgyu Kim reported the splat below with a repro. [0] The repro sets up a UDP reuseport group with a cBPF prog and replaces it with a new one while another thread is sending a UDP packet to the group. The reuseport prog is freed by sk_reuseport_prog_free(). bpf_prog_put() is called for "e"BPF prog to destruct through multiple stages while cBPF prog is freed immediately by bpf_release_orig_filter() and bpf_prog_free(). If a reuseport prog is detached from the setsockopt() path (reuseport_attach_prog() or reuseport_detach_prog()), sk_reuseport_prog_free() is called without waiting for RCU readers to complete, resulting in various bugs. Let's defer freeing the reuseport cBPF prog after one RCU grace period. Note "e"BPF prog is safe as is unless the fast path starts to touch fields destroyed in bpf_prog_put_deferred() and __bpf_prog_put_noref(). [0]: BUG: KASAN: vmalloc-out-of-bounds in reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 Read of size 4 at addr ffffc9000051e004 by task slowme/10208 CPU: 6 UID: 1000 PID: 10208 Comm: slowme Not tainted 7.0.0-geb7ac95ff75e #32 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 udp4_lib_lookup2+0x3bc/0x950 net/ipv4/udp.c:495 __udp4_lib_lookup+0x768/0xe20 net/ipv4/udp.c:723 __udp4_lib_lookup_skb+0x297/0x390 net/ipv4/udp.c:752 __udp4_lib_rcv+0x1312/0x2620 net/ipv4/udp.c:2752 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6181 [inline] __netif_receive_skb net/core/dev.c:6294 [inline] process_backlog+0xaa4/0x1960 net/core/dev.c:6645 __napi_poll+0xae/0x340 net/core/dev.c:7709 napi_poll net/core/dev.c:7772 [inline] net_rx_action+0x5d7/0xf50 net/core/dev.c:7929 handle_softirqs+0x22b/0x870 kernel/softirq.c:622 do_softirq+0x76/0xd0 kernel/softirq.c:523 </IRQ> <TASK> __local_bh_enable_ip+0xf8/0x130 kernel/softirq.c:450 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline] __dev_queue_xmit+0x1dd7/0x3710 net/core/dev.c:4890 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xca9/0x1070 net/ipv4/ip_output.c:237 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip_output+0x29f/0x450 net/ipv4/ip_output.c:438 ip_send_skb+0x45/0xc0 net/ipv4/ip_output.c:1508 udp_send_skb+0xb04/0x1510 net/ipv4/udp.c:1195 udp_sendmsg+0x1a71/0x2350 net/ipv4/udp.c:1485 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] __sys_sendto+0x554/0x680 net/socket.c:2206 __do_sys_sendto net/socket.c:2213 [inline] __se_sys_sendto net/socket.c:2209 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2209 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x160/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x415a2d Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6bc31e41e8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f6bc31e4cdc RCX: 0000000000415a2d RDX: 0000000000000001 RSI: 00007f6bc31e421f RDI: 0000000000000003 RBP: 00007f6bc31e4240 R08: 00007f6bc31e4220 R09: 0000000000000010 R10: 0000000000000000 R11: ---truncated--- | ||||
| CVE-2026-52909 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_vti: set netns_immutable on the fallback device. john1988 and Noam Rathaus reported that vti6_init_net() does not set the netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0). Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel) correctly set this flag during their fallback device initialization to prevent them from being moved to another network namespace. | ||||
| CVE-2026-52908 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA: During rereg_mr ensure that REREG_ACCESS is compatible If IB_MR_REREG_ACCESS changes from RO to RW then the umem has to be re-evaluated to ensure it is properly pinned as RW. Since the umem is hidden inside each driver's mr struct add a ib_umem_check_rereg() function that each driver has to call before processing IB_MR_REREG_ACCESS. mlx4 has to retain its duplicate ib_access_writable check because it implements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both items in place sequentially while the MR is live, so it will continue to not support this combination. | ||||
| CVE-2026-46331 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fix pedit partial COW leading to page cache corruption tcf_pedit_act() computes the COW range for skb_ensure_writable() once before the key loop using tcfp_off_max_hint, but the hint does not account for the runtime header offset added by typed keys. This can leave part of the write region un-COW'd. Fix by moving skb_ensure_writable() inside the per-key loop where the actual write offset is known, and add overflow checking on the offset arithmetic. For negative offsets (e.g. Ethernet header edits at ingress), use skb_cow() to COW the headroom instead. Guard offset_valid() against INT_MIN, where negation is undefined. | ||||
| CVE-2026-13483 | 1 Arc53 | 1 Docsgpt | 2026-06-28 | 3.1 Low |
| A flaw has been found in arc53 DocsGPT up to 0.18.0. The affected element is the function encrypt_credentials of the file application/security/encryption.py of the component Credential Storage. This manipulation causes insufficient verification of data authenticity. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is described as difficult. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-13482 | 1 Skypilot-org | 1 Skypilot | 2026-06-28 | 3.7 Low |
| A vulnerability was detected in skypilot-org skypilot up to 0.12.0. Impacted is the function username.encode of the file sky/users/server.py of the component User ID Handler. The manipulation results in use of weak hash. The attack may be performed from remote. This attack is characterized by high complexity. The exploitability is considered difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure. | ||||
| CVE-2026-10593 | 2026-06-28 | 6.5 Medium | ||
| The Zephyr Bluetooth LE Audio Basic Audio Profile (BAP) unicast client mishandles peer-supplied ASE state notifications. In unicast_client_ep_qos_state() (subsys/bluetooth/audio/bap_unicast_client.c), the handler writes attacker-controlled QoS fields (interval, framing, phy, sdu, rtn, latency, pd) through the stream-qos pointer with only a stream != NULL guard. stream-qos is NULL for any stream that has been codec-configured via bt_bap_stream_config() but not yet added to a unicast group (it is set only by unicast_group_add_stream()). A malicious or buggy remote ASCS server, to which the local device is connected as a BAP unicast client, can send a GATT notification announcing the ASE has entered the QoS Configured state while the local endpoint is still in the Codec Configured state — a transition the dispatcher explicitly permits — during that window, causing a write through a NULL pointer and a crash (denial of service). The data written is itself remote-controlled. The defect shipped in v4.3.0 and v4.4.0 (and earlier). The fix re-points all BAP QoS storage to the always-valid embedded ep-qos struct, eliminating the NULL dereference. | ||||
| CVE-2026-10646 | 2026-06-28 | 7.4 High | ||
| Zephyr's BSD-sockets getaddrinfo() implementation (subsys/net/lib/sockets/getaddrinfo.c) passes a pointer to a stack-allocated state object (struct getaddrinfo_state ai_state) as the user_data of an asynchronous DNS resolver query. The socket layer waits on a semaphore with a timeout deliberately set slightly longer than the resolver's own per-query timeout. When that semaphore wait nonetheless times out (-EAGAIN) - which can occur when the resolver's timeout work is delayed by workqueue contention, or in the documented multi-retry configuration where CONFIG_NET_SOCKETS_DNS_TIMEOUT exceeds CONFIG_NET_SOCKETS_DNS_BACKOFF_INTERVAL - the pre-fix code retries the query (goto again) without cancelling the previous one and without resetting the semaphore. The previous query slot remains active in the resolver with its callback and the stack pointer as user_data, and ai_state-dns_id is overwritten so the stale query can no longer be cancelled. A subsequent DNS response delivered over UDP and matched by its 16-bit transaction id (in dispatcher_cb()/dns_read()), or the resolver's own delayed query-timeout work, then invokes dns_resolve_cb() against the now out-of-scope stack frame, writing through the stale pointer (state-status, state-idx, state-ai_arr[], and k_sem_give()). Because the triggering response is network-delivered and its 16-bit id is spoofable/replayable by an on- or off-path attacker, this is a network-influenceable use-after-return that can corrupt reused stack memory, leading to crashes/denial of service or memory corruption. The fix cancels the timed-out query by name and type before retrying and resets the local semaphore, eliminating the stale callback path. Affected: Zephyr v4.0.0 through v4.4.0. | ||||
| CVE-2026-10644 | 2026-06-28 | 4.2 Medium | ||
| The Microchip SERCOM-G1 UART driver (drivers/serial/uart_mchp_sercom_g1.c), used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchronous (DMA) receive path. When uart_rx_enable() is invoked with a one-byte receive buffer (len == 1) and CONFIG_UART_MCHP_ASYNC is enabled, the RX-complete ISR starts a single-beat DMA transfer while a received byte is already pending in the SERCOM DATA register. On this SoC the peripheral-triggered DMA start sequencing then writes one byte past the end of the caller-supplied buffer (CWE-787). The overflowed byte's value is the UART RX data supplied by the connected serial peer (adjacent attacker), while its size and location are fixed at one byte immediately after the buffer. Exploitation requires the async UART config (not enabled by default on the in-tree PIC32CM-JH boards) and a consumer that enables RX with a one-byte buffer; impact is limited single-byte memory corruption adjacent to the RX buffer (possible crash / denial of service). The defect shipped in v4.4.0. The fix reads the first byte with the CPU and, for one-byte buffers, performs no DMA at all; for larger buffers it sizes the DMA for the remaining len-1 bytes. | ||||
| CVE-2026-10643 | 1 Zephyrproject | 1 Zephyr | 2026-06-28 | 8.7 High |
| Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg-msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer. Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer. The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet. The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0. | ||||
| CVE-2026-58058 | 1 Nmap | 1 Nmap | 2026-06-28 | 6.5 Medium |
| Nmap through 7.99 does not keep the IPv6 extension-header walk within the captured packet in ipv6_get_data_primitive (libnetutil/netutil.cc), so the pointer advances past the buffer and the remaining-length computation underflows to a large value. A scanned target or on-path attacker returning a crafted IPv6 response with a truncated extension header can trigger out-of-bounds reads and a crash during raw IPv6 scans. | ||||
| CVE-2026-58057 | 1 Flowiseai | 1 Flowise | 2026-06-28 | 5 Medium |
| Flowise before 3.1.3 validates Custom MCP stdio environment variables against a denylist using a case-sensitive comparison, so on Windows, where environment names are case-insensitive, supplying 'node_options' bypasses the NODE_OPTIONS denylist entry. An authenticated user who can configure a Custom MCP node can thereby inject NODE_OPTIONS --require and execute arbitrary code in the Flowise server context. | ||||
| CVE-2026-58056 | 1 Rustdesk | 1 Rustdesk | 2026-06-28 | 7.6 High |
| RustDesk gates incoming control messages on per-capability flags rather than on the session's authorized connection type, and a file-transfer session does not clear those flags. A peer holding only a valid FileTransfer authorization can inject keyboard and mouse input and reach the unguarded screenshot and display-capture handlers, acting outside its granted scope. | ||||
| CVE-2026-58055 | 1 Nghttp2 | 1 Nghttp2 | 2026-06-28 | 5.4 Medium |
| nghttp2's nghttpx proxy through 1.69.0 forwards an HTTP/1.1 Upgrade request that also carries a Content-Length header and body onto reusable keep-alive backend connections, re-adding the Upgrade and Connection headers while passing Content-Length verbatim. A backend that resolves the resulting ambiguous message in the attacker's favor enables HTTP request/response smuggling and cross-client response-queue poisoning. | ||||
| CVE-2026-58054 | 1 Mybb | 1 Mybb | 2026-06-28 | 7.2 High |
| MyBB 1.8.40 does not restrict which usergroup a limited Admin Control Panel user may assign when creating or editing users; the user module offers the Administrators group (gid 4) and its datahandler's verify_usergroup() unconditionally returns true. An admin holding only the delegated user-management permission can assign the Administrators group to an account and escalate to the full Administrator permission set. | ||||