Export limit exceeded: 359533 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (359533 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46320 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: tap: free page on error paths in tap_get_user_xdp() tap_get_user_xdp() rejects a frame shorter than ETH_HLEN with -EINVAL, and returns -ENOMEM when build_skb() fails. Both paths jump to the err label without freeing the page that vhost_net_build_xdp() allocated for the frame. tap_sendmsg() discards the per-buffer return value and always returns 0, so vhost_tx_batch() takes the success path and never frees the page; each rejected frame in a batch leaks one page-frag chunk. Free the page on both error paths, before the skb is built. This is the tap counterpart of the same leak in tun_xdp_one(). | ||||
| CVE-2026-46314 | 1 Linux | 1 Linux Kernel | 2026-06-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Reject empty multisync extension to prevent infinite loop v3d_get_extensions() walks a userspace-provided singly-linked list of ioctl extensions without any bound on the chain length. A local user can craft a self-referential extension (ext->next == &ext) with zero in_sync_count and out_sync_count, which bypasses the existing duplicate- extension guard: if (se->in_sync_count || se->out_sync_count) return -EINVAL; The guard never fires because v3d_get_multisync_post_deps() returns immediately when count is zero, leaving both fields at zero on every iteration. The result is an infinite loop in kernel context, blocking the calling thread and pegging a CPU core indefinitely. Fix this by rejecting a multisync extension where both in_sync_count and out_sync_count are zero in v3d_get_multisync_submit_deps(). An empty multisync carries no synchronization information and serves no useful purpose, so returning -EINVAL for such an extension is the correct defense against this attack vector. | ||||
| CVE-2026-46299 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix held lock freed on hfsplus_fill_super() hfsplus_fill_super() calls hfs_find_init() to initialize a search structure, which acquires tree->tree_lock. If the subsequent call to hfsplus_cat_build_key() fails, the function jumps to the out_put_root error label without releasing the lock. The later cleanup path then frees the tree data structure with the lock still held, triggering a held lock freed warning. Fix this by adding the missing hfs_find_exit(&fd) call before jumping to the out_put_root error label. This ensures that tree->tree_lock is properly released on the error path. The bug was originally detected on v6.13-rc1 using an experimental static analysis tool we are developing, and we have verified that the issue persists in the latest mainline kernel. The tool is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available. We confirmed the bug by runtime testing under QEMU with x86_64 defconfig, lockdep enabled, and CONFIG_HFSPLUS_FS=y. To trigger the error path, we used GDB to dynamically shrink the max_unistr_len parameter to 1 before hfsplus_asc2uni() is called. This forces hfsplus_asc2uni() to naturally return -ENAMETOOLONG, which propagates to hfsplus_cat_build_key() and exercises the faulty error path. The following warning was observed during mount: ========================= WARNING: held lock freed! 7.0.0-rc3-00016-gb4f0dd314b39 #4 Not tainted ------------------------- mount/174 is freeing memory ffff888103f92000-ffff888103f92fff, with a lock still held there! ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0 2 locks held by mount/174: #0: ffff888103f960e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.constprop.0+0x167/0xa40 #1: ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0 stack backtrace: CPU: 2 UID: 0 PID: 174 Comm: mount Not tainted 7.0.0-rc3-00016-gb4f0dd314b39 #4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x82/0xd0 debug_check_no_locks_freed+0x13a/0x180 kfree+0x16b/0x510 ? hfsplus_fill_super+0xcb4/0x18a0 hfsplus_fill_super+0xcb4/0x18a0 ? __pfx_hfsplus_fill_super+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? bdev_open+0x65f/0xc30 ? srso_return_thunk+0x5/0x5f ? pointer+0x4ce/0xbf0 ? trace_contention_end+0x11c/0x150 ? __pfx_pointer+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? bdev_open+0x79b/0xc30 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? vsnprintf+0x6da/0x1270 ? srso_return_thunk+0x5/0x5f ? __mutex_unlock_slowpath+0x157/0x740 ? __pfx_vsnprintf+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? mark_held_locks+0x49/0x80 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? irqentry_exit+0x17b/0x5e0 ? trace_irq_disable.constprop.0+0x116/0x150 ? __pfx_hfsplus_fill_super+0x10/0x10 ? __pfx_hfsplus_fill_super+0x10/0x10 get_tree_bdev_flags+0x302/0x580 ? __pfx_get_tree_bdev_flags+0x10/0x10 ? vfs_parse_fs_qstr+0x129/0x1a0 ? __pfx_vfs_parse_fs_qstr+0x3/0x10 vfs_get_tree+0x89/0x320 fc_mount+0x10/0x1d0 path_mount+0x5c5/0x21c0 ? __pfx_path_mount+0x10/0x10 ? trace_irq_enable.constprop.0+0x116/0x150 ? trace_irq_enable.constprop.0+0x116/0x150 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? kmem_cache_free+0x307/0x540 ? user_path_at+0x51/0x60 ? __x64_sys_mount+0x212/0x280 ? srso_return_thunk+0x5/0x5f __x64_sys_mount+0x212/0x280 ? __pfx___x64_sys_mount+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? trace_irq_enable.constprop.0+0x116/0x150 ? srso_return_thunk+0x5/0x5f do_syscall_64+0x111/0x680 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ffacad55eae Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 8 RSP: 002b ---truncated--- | ||||
| CVE-2026-46296 | 1 Linux | 1 Linux Kernel | 2026-06-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: s3c64xx: fix NULL-deref on driver unbind A change moving DMA channel allocation from probe() back to s3c64xx_spi_prepare_transfer() failed to remove the corresponding deallocation from remove(). Drop the bogus DMA channel release from remove() to avoid triggering a NULL-pointer dereference on driver unbind. This issue was flagged by Sashiko when reviewing a controller deregistration fix. | ||||
| CVE-2026-46292 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: core: Fix detach procedure for virtual devices in genpd If a device is attached to a PM domain through genpd_dev_pm_attach_by_id(), genpd calls pm_runtime_enable() for the corresponding virtual device that it registers. While this avoids boilerplate code in drivers, there is no corresponding call to pm_runtime_disable() in genpd_dev_pm_detach(). This means these virtual devices are typically detached from its genpd, while runtime PM remains enabled for them, which is not how things are designed to work. In worst cases it may lead to critical errors, like a NULL pointer dereference bug in genpd_runtime_suspend(), which was recently reported. For another case, we may end up keeping an unnecessary vote for a performance state for the device. To fix these problems, let's add this missing call to pm_runtime_disable() in genpd_dev_pm_detach(). | ||||
| CVE-2026-46291 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: caam - guard HMAC key hex dumps in hash_digest_key Use print_hex_dump_devel() for dumping sensitive HMAC key bytes in hash_digest_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. | ||||
| CVE-2026-46280 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: lib: test_hmm: evict device pages on file close to avoid use-after-free Patch series "Minor hmm_test fixes and cleanups". Two bugfixes a cleanup for the HMM kernel selftests. These were mostly reported by Zenghui Yu with special thanks to Lorenzo for analysing and pointing out the problems. This patch (of 3): When dmirror_fops_release() is called it frees the dmirror struct but doesn't migrate device private pages back to system memory first. This leaves those pages with a dangling zone_device_data pointer to the freed dmirror. If a subsequent fault occurs on those pages (eg. during coredump) the dmirror_devmem_fault() callback dereferences the stale pointer causing a kernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64, where a test failure triggered SIGABRT and the resulting coredump walked the VMAs faulting in the stale device private pages. Fix this by calling dmirror_device_evict_chunk() for each devmem chunk in dmirror_fops_release() to migrate all device private pages back to system memory before freeing the dmirror struct. The function is moved earlier in the file to avoid a forward declaration. | ||||
| CVE-2026-46208 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop tp_meter sessions during mesh teardown TP meter sessions remain linked on bat_priv->tp_list after the netlink request has already finished. When the mesh interface is removed, batadv_mesh_free() currently tears down the mesh without first draining these sessions. A running sender thread or a late incoming tp_meter packet can then keep processing against a mesh instance which is already shutting down. Synchronize tp_meter with the mesh lifetime by stopping all active sessions from batadv_mesh_free() and waiting for sender threads to exit before teardown continues. | ||||
| CVE-2026-46203 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: fix unclocked access on unbind Make sure that the controller is runtime resumed before disabling it during driver unbind to avoid an unclocked register access. This issue was flagged by Sashiko when reviewing a controller deregistration fix. | ||||
| CVE-2026-46196 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func() When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func() invokes the subsystem's ext->regfunc() before attempting to install the new probe via func_add(). If func_add() then fails (for example, when allocate_probes() cannot allocate a new probe array under memory pressure and returns -ENOMEM), the function returns the error without calling the matching ext->unregfunc(), leaving the side effects of regfunc() behind with no installed probe to justify them. For syscall tracepoints this is particularly unpleasant: syscall_regfunc() bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task. After a leaked failure, the refcount is stuck at a non-zero value with no consumer, and every task continues paying the syscall trace entry/exit overhead until reboot. Other subsystems providing regfunc()/unregfunc() pairs exhibit similarly scoped persistent state. Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the func_add() error path, gated on the same condition used there so the unwind is symmetric with the registration. | ||||
| CVE-2026-46195 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate dacloffset before building DACL pointers parse_sec_desc(), build_sec_desc(), and the chown path in id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd before proving a DACL header fits inside the returned security descriptor. On 32-bit builds a malicious server can return dacloffset near U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip past the later pointer-based bounds checks. build_sec_desc() and id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped pointer in the chmod/chown rewrite paths. Validate dacloffset numerically before building any DACL pointer and reuse the same helper at the three DACL entry points. | ||||
| CVE-2026-46193 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: ah: account for ESN high bits in async callbacks AH allocates its temporary auth/ICV layout differently when ESN is enabled: the async ahash setup appends a 4-byte seqhi slot before the ICV or auth_data area, but the async completion callbacks still reconstruct the temporary layout as if seqhi were absent. With an async AH implementation selected, that makes AH copy or compare the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH with ESN and forced async hmac(sha1), ping fails with 100% packet loss, and the callback logs show the pre-fix drift: ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24 ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36 Reconstruct the callback-side layout the same way the setup path built it by skipping the ESN seqhi slot before locating the saved auth_data or ICV. Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV computation, so the async callbacks must account for the seqhi slot. Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24 expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the change has not been tested against a real async hardware AH engine. | ||||
| CVE-2026-46191 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fbcon: Avoid OOB font access if console rotation fails Clear the font buffer if the reallocation during console rotation fails in fbcon_rotate_font(). The putcs implementations for the rotated buffer will return early in this case. See [1] for an example. Currently, fbcon_rotate_font() keeps the old buffer, which is too small for the rotated font. Printing to the rotated console with a high-enough character code will overflow the font buffer. v2: - fix typos in commit message | ||||
| CVE-2026-46190 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show() Sashiko noticed an out-of-bounds read [1]. In spi_nor_params_show(), the snor_f_names array is passed to spi_nor_print_flags() using sizeof(snor_f_names). Since snor_f_names is an array of pointers, sizeof() returns the total number of bytes occupied by the pointers (element_count * sizeof(void *)) rather than the element count itself. On 64-bit systems, this makes the passed length 8x larger than intended. Inside spi_nor_print_flags(), the 'names_len' argument is used to bounds-check the 'names' array access. An out-of-bounds read occurs if a flag bit is set that exceeds the array's actual element count but is within the inflated byte-size count. Correct this by using ARRAY_SIZE() to pass the actual number of string pointers in the array. | ||||
| CVE-2026-46180 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task Watchdog task might end between send_sig() and kthread_stop() calls, what results in the use-after-free issue. Fix this by increasing watchdog task reference count before calling send_sig() and dropping it by switching to kthread_stop_put(). | ||||
| CVE-2026-46169 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix uninit-value by validating catalog record size Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The root cause is that hfs_brec_read() doesn't validate that the on-disk record size matches the expected size for the record type being read. When mounting a corrupted filesystem, hfs_brec_read() may read less data than expected. For example, when reading a catalog thread record, the debug output showed: HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26 HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ! hfs_brec_read() only validates that entrylength is not greater than the buffer size, but doesn't check if it's less than expected. It successfully reads 26 bytes into a 520-byte structure and returns success, leaving 494 bytes uninitialized. This uninitialized data in tmp.thread.nodeName then gets copied by hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering the KMSAN warning when the uninitialized bytes are used as array indices in case_fold(). Fix by introducing hfsplus_brec_read_cat() wrapper that: 1. Calls hfs_brec_read() to read the data 2. Validates the record size based on the type field: - Fixed size for folder and file records - Variable size for thread records (depends on string length) 3. Returns -EIO if size doesn't match expected For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading nodeName.length to avoid reading uninitialized data at call sites that don't zero-initialize the entry structure. Also initialize the tmp variable in hfsplus_find_cat() as defensive programming to ensure no uninitialized data even if validation is bypassed. | ||||
| CVE-2026-46164 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double free in create_space_info_sub_group() error path When kobject_init_and_add() fails, the call chain is: create_space_info_sub_group() -> btrfs_sysfs_add_space_info_type() -> kobject_init_and_add() -> failure -> kobject_put(&sub_group->kobj) -> space_info_release() -> kfree(sub_group) Then control returns to create_space_info_sub_group(), where: btrfs_sysfs_add_space_info_type() returns error -> kfree(sub_group) Thus, sub_group is freed twice. Keep parent->sub_group[index] = NULL for the failure path, but after btrfs_sysfs_add_space_info_type() has called kobject_put(), let the kobject release callback handle the cleanup. | ||||
| CVE-2026-46160 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix missing last_unlink_trans update when removing a directory When removing a directory we are not updating its last_unlink_trans field, which can result in incorrect fsync behaviour in case some one fsyncs the directory after it was removed because it's holding a file descriptor on it. Example scenario: mkdir /mnt/dir1 mkdir /mnt/dir1/dir2 mkdir /mnt/dir3 sync -f /mnt # Do some change to the directory and fsync it. chmod 700 /mnt/dir1 xfs_io -c fsync /mnt/dir1 # Move dir2 out of dir1 so that dir1 becomes empty. mv /mnt/dir1/dir2 /mnt/dir3/ open fd on /mnt/dir1 call rmdir(2) on path "/mnt/dir1" fsync fd <trigger power failure> When attempting to mount the filesystem, the log replay will fail with an -EIO error and dmesg/syslog has the following: [445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650 [445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm [445771.627912] BTRFS info (device dm-0): start tree-log replay [445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5 [445771.629453] memcg:ffff89f400351b00 [445771.629892] aops:btree_aops [btrfs] ino:1 [445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff) [445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8 [445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00 [445771.635029] page dumped because: eb page dump [445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir [445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5 [445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087 [445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 [445771.638097] inode generation 3 transid 9 size 16 nbytes 16384 [445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0 [445771.638100] rdev 0 sequence 2 flags 0x0 [445771.638102] atime 1775744884.0 [445771.660056] ctime 1775744885.645502983 [445771.660058] mtime 1775744885.645502983 [445771.660060] otime 1775744884.0 [445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 [445771.660064] index 0 name_len 2 [445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34 [445771.660068] location key (259 1 0) type 2 [445771.660070] transid 9 data_len 0 name_len 4 [445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34 [445771.660076] location key (257 1 0) type 2 [445771.660077] transid 9 data_len 0 name_len 4 [445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34 [445771.660079] location key (257 1 0) type 2 [445771.660080] transid 9 data_len 0 name_len 4 [445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34 [445771.660082] location key (259 1 0) type 2 [445771.660083] transid 9 data_len 0 name_len 4 [445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160 [445771.660086] inode generation 9 transid 9 size 8 nbytes 0 [445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0 [445771.660088] rdev 0 sequence 2 flags 0x0 [445771.660089] atime 1775744885.641174097 [445771.660090] ctime 1775744885.645502983 [445771.660091] mtime 1775744885.645502983 [445771.660105] otime 1775744885.641174097 [445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14 [445771.660107] index 2 name_len 4 [445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34 [445771.660109] location key (2 ---truncated--- | ||||
| CVE-2026-46159 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leak btrfs_ioctl_space_info() has a TOCTOU race between two passes over the block group RAID type lists. The first pass counts entries to determine the allocation size, then the second pass fills the buffer. The groups_sem rwlock is released between passes, allowing concurrent block group removal to reduce the entry count. When the second pass fills fewer entries than the first pass counted, copy_to_user() copies the full alloc_size bytes including trailing uninitialized kmalloc bytes to userspace. Fix by copying only total_spaces entries (the actually-filled count from the second pass) instead of alloc_size bytes, and switch to kzalloc so any future copy size mismatch cannot leak heap data. | ||||
| CVE-2026-46137 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: fix potential data-race This mptcp_pm_add_timer() helper is executed as a timer callback in softirq context. To avoid any data races, the socket lock needs to be held with bh_lock_sock(). If the socket is in use, retry again soon after, similar to what is done with the keepalive timer. | ||||