Export limit exceeded: 370456 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370456 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64299 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Prevent out-of-bounds read in glob matching String event fields are not necessarily NUL-terminated, so the filter predicate functions (filter_pred_string(), filter_pred_strloc() and filter_pred_strrelloc()) pass the field length to the regex match callbacks, and the length-aware matchers honour it. regex_match_glob() was the exception: it ignored the length and called glob_match(), which scans the string until it hits a NUL byte. Some string fields are not NUL-terminated. One example is the dynamic char array of the xfs_* namespace tracepoints, which is copied without a trailing NUL. For such a field, glob matching reads past the end of the event field, causing a KASAN slab-out-of-bounds read in glob_match(), reached via regex_match_glob() and filter_match_preds() from the xfs_lookup tracepoint. Add a length-bounded glob_match_len() and use it from regex_match_glob() so glob matching always stops at the field boundary. The matching loop is factored into a shared helper so glob_match() keeps its behaviour. | ||||
| CVE-2026-64301 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: scmi: fix of_node refcount leak in scmi_regulator_probe() scmi_regulator_probe() calls of_find_node_by_name() which takes a reference on the returned device node. On the error path where process_scmi_regulator_of_node() fails, the function returns without calling of_node_put() on the child node, leaking the reference. Add of_node_put(np) on the error path to properly release the reference. | ||||
| CVE-2026-64304 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - validate RSA CRT component lengths The generic RSA key parser (rsa_helper.c) bounds each CRT component (p, q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt() allocates half-size DMA buffers (key_sz / 2) and right-aligns each component with: memcpy(dst + half_key_sz - len, src, len) When a CRT component is larger than half_key_sz the subtraction underflows and memcpy writes past the DMA buffer, causing memory corruption. Add a len > half_key_sz check next to the existing !len check for each of the five CRT components so the driver falls back to the non-CRT path instead of writing out of bounds. | ||||
| CVE-2026-64305 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - protect service table iterations with service_lock The service_table list is protected by service_lock when entries are added or removed (in adf_service_add() and adf_service_remove()), but several functions iterate over the list without holding this lock. A concurrent adf_service_register() or adf_service_unregister() call could modify the list during traversal, leading to list corruption or a use-after-free. Fix this by holding service_lock across all list_for_each_entry() iterations of service_table in adf_dev_init(), adf_dev_start(), adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(), adf_dev_restarted_notify(), and adf_error_notifier(). The lock ordering is safe: callers of the static helpers (adf_dev_up() and adf_dev_down()) acquire state_lock before service_lock, and no event_hld callback or service_lock holder ever acquires state_lock in the reverse order. | ||||
| CVE-2026-64307 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_CONFIG) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? Refuse to re-try initialization if SNP is not already initialized for SNP_CONFIG. This is technically an ABI break: before if SNP initialization failed it could be transparently retriggered by this ioctl, and if no VMs were running, everything worked fine. Hopefully this is enough of a corner case that nobody will notice, but someone does, there are a few options: * do something like symbol_get() for kvm and refuse to initialize if KVM is loaded * check each cpu's HSAVE_PA for non-zero data before re-initializing * once initialization has failed, continue to refuse to initialize until the ccp module is unloaded | ||||
| CVE-2026-64309 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_COMMIT) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? The SNP_COMMIT command does not require the firmware to be in any particular state. Skip initializing it if it was previously uninitialized. The SEV-SNP firmware specification doc 56860 does not mention SNP_COMMIT in Table 5 as a command that is allowed in the UNINIT state, but it is in fact allowed and a future documentation update will reflect that. | ||||
| CVE-2026-64312 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - restore callback for non-parallel fallback pcrypt installs pcrypt_aead_done() on the child AEAD request before trying to submit it through padata. If padata_do_parallel() returns -EBUSY, pcrypt falls back to calling the child AEAD directly. That fallback must not keep the padata completion callback. Otherwise an asynchronous completion runs pcrypt_aead_done() even though the request was never enrolled in padata. Restore the original request callback and callback data before calling the child AEAD directly. This keeps the fallback path aligned with a direct AEAD request while leaving the parallel path unchanged. | ||||
| CVE-2026-64315 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. | ||||
| CVE-2026-64316 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() and gen_split_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. | ||||
| CVE-2026-15962 | 2 Techjewel, Wordpress | 2 Fluent Forms Pro Add On Pack, Wordpress | 2026-07-26 | 8.8 High |
| The Fluent Forms Pro Add On Pack plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 6.2.6 via deserialization of untrusted input. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject a PHP Object. The additional presence of a POP chain allows attackers to change user passwords and potentially take over administrator accounts. Note: This can only be exploited if user update integration is enabled and a user meta field is mapped. | ||||
| CVE-2026-64317 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: isofs: bound Rock Ridge symlink components to the SL record get_symlink_chunk() and the SL handling in parse_rock_ridge_inode_internal() walk the variable-length components of a Rock Ridge "SL" (symbolic link) record. Each component is a two-byte header (flags, len) followed by len bytes of text, so it occupies slp->len + 2 bytes. Both loops read slp->len and advance to the next component, and get_symlink_chunk() additionally does memcpy(rpnt, slp->text, slp->len), but neither checks that the component lies within the SL record before dereferencing it. A crafted SL record whose component declares a len that runs past the record (rr->len) therefore triggers an out-of-bounds read of up to 255 bytes. When the record sits at the tail of its backing buffer - for example a small kmalloc()ed continuation block reached through a CE record - the read crosses the allocation; get_symlink_chunk() then copies the out-of-bounds bytes into the symlink body returned to user space by readlink(), disclosing adjacent kernel memory. ISO 9660 images are routinely mounted from untrusted removable media - desktop environments auto-mount them (e.g. via udisks2) without CAP_SYS_ADMIN - so the record contents are attacker-controlled. Reject any component that does not fit in the remaining record bytes before using it. In get_symlink_chunk() return NULL, like the existing output-buffer (plimit) checks, so a malformed record makes readlink() fail with -EIO rather than silently returning a truncated target; in parse_rock_ridge_inode_internal() stop the inode-size walk. | ||||
| CVE-2026-64318 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold. | ||||
| CVE-2026-64321 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme: target: rdma: fix ndev refcount leak on queue connect nvmet_rdma_queue_connect() calls nvmet_rdma_find_get_device() which acquires a reference on the returned ndev via kref_get(). On the path where the host queue backlog is exceeded and the function returns NVME_SC_CONNECT_CTRL_BUSY, reference of ndev is not released, leaking the kref. Fix this by adding a goto to the existing put_device label before the early return. | ||||
| CVE-2026-64322 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: udf: validate sparing table length as an entry count, not a byte count udf_load_sparable_map() accepts a sparing table when sizeof(*st) + le16_to_cpu(st->reallocationTableLen) > sb->s_blocksize is false, i.e. it treats reallocationTableLen as a number of BYTES that must fit in the block. But the table is walked as an array of 8-byte sparingEntry elements: for (i = 0; i < le16_to_cpu(st->reallocationTableLen); i++) { struct sparingEntry *entry = &st->mapEntry[i]; ... entry->origLocation ... } in udf_get_pblock_spar15() and udf_relocate_blocks(). A reallocationTableLen of N therefore passes the check whenever sizeof(*st) + N <= blocksize, yet the consumers index sizeof(*st) + N * sizeof(struct sparingEntry) bytes -- up to ~8x the block. On a crafted UDF image this is an out-of-bounds read in udf_get_pblock_spar15(); udf_relocate_blocks() additionally feeds the same length to udf_update_tag(), whose crc_itu_t() reads far past the block, and its memmove() through st->mapEntry[] is an out-of-bounds write. Validate reallocationTableLen as the entry count it is, with struct_size(). | ||||
| CVE-2026-64323 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: udf: validate VAT header length against the VAT inode size udf_load_vat() takes the virtual partition's start offset straight from the on-disk VAT 2.0 header without checking it against the VAT inode size: map->s_type_specific.s_virtual.s_start_offset = le16_to_cpu(vat20->lengthHeader); map->s_type_specific.s_virtual.s_num_entries = (sbi->s_vat_inode->i_size - map->s_type_specific.s_virtual.s_start_offset) >> 2; lengthHeader is a fully attacker-controlled 16-bit value. If it exceeds the VAT inode size, the s_num_entries subtraction underflows to a huge count, which defeats the "block > s_num_entries" bound in udf_get_pblock_virt15(); and on the ICB-inline path that function reads ((__le32 *)(iinfo->i_data + s_start_offset))[block] so a large s_start_offset indexes past the inode's in-ICB data. Mounting a crafted UDF image with a virtual (VAT) partition then triggers an out-of-bounds read. Reject a VAT whose header length does not leave room for at least one entry within the VAT inode. | ||||
| CVE-2026-64324 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: udf: validate free block extents against the partition length udf_free_blocks() checks the logical block number and count against the partition length, but drops the extent offset from that final bound. A crafted extent can pass the guard while logicalBlockNum + offset + count points past the partition, which later indexes past the space bitmap array. A single ftruncate(2) on a file backed by such an extent reliably panics the kernel. This is a local availability issue. On desktop systems where UDisks/polkit allows the active user to mount removable UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply the crafted filesystem and trigger the panic by truncating a writable file on it. Systems that require root or CAP_SYS_ADMIN to mount the image have a higher prerequisite. No confidentiality or integrity impact is claimed: the reproduced primitive is an out-of-bounds read of a bitmap pointer slot followed by a kernel panic. Use the already computed logicalBlockNum + offset + count value for the partition length check. Also make load_block_bitmap() reject an out-of-range block group before indexing s_block_bitmap[], so corrupted callers cannot walk past the flexible array. | ||||
| CVE-2026-64325 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921/mt7925: fix NULL dereference in CSA beacon This patch is based on a BUG as reported by Bongani Hlope at https://lore.kernel.org/all/20260502125824.425d7159@bongani-mini.home.org.za/ When a channel-switch announcement (CSA) beacon is received, cfg80211 queues a wiphy work item that eventually calls mt7921_channel_switch_rx_beacon(). If the station disconnects (or the channel context is otherwise torn down) between the time the work is queued and the time it runs, the driver's dev->new_ctx pointer can already have been cleared to NULL. mt7921_channel_switch_rx_beacon() then dereferences new_ctx unconditionally, triggering a NULL pointer dereference at address 0x0: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:mt7921_channel_switch_rx_beacon+0x1f/0x100 [mt7921_common] The same missing guard exists in mt7925_channel_switch_rx_beacon(), which shares the same code pattern introduced by the same commit. Add an early-return NULL check for dev->new_ctx in both mt7921_channel_switch_rx_beacon() and mt7925_channel_switch_rx_beacon(). When new_ctx is NULL there is no pending channel switch to process, so returning immediately is the correct and safe action. Oops-Analysis: http://oops.fenrus.org/reports/lkml/20260502125824.425d7159@bongani-mini.home.org.za/report.html | ||||
| CVE-2026-64326 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: block: skip sync_blockdev() on surprise removal in bdev_mark_dead() bdev_mark_dead()'s @surprise == true means the device is already gone. The filesystem callback fs_bdev_mark_dead() honours this and skips sync_filesystem(), but the bare block device path (no ->mark_dead op) lost its !surprise guard when the holder ->mark_dead callback was wired up (see Fixes), and now calls sync_blockdev() unconditionally, which can hang forever waiting on writeback that can no longer complete. syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path: nvme_mark_namespaces_dead() -> blk_mark_disk_dead() -> bdev_mark_dead(bdev, true) -> sync_blockdev() blocks in folio_wait_writeback(), wedging the reset worker and every task waiting on it. Skip the sync on surprise removal, matching fs_bdev_mark_dead(); invalidate_bdev() still runs. Orderly removal (surprise == false) is unchanged. Found by FuzzNvme(Syzkaller with FEMU fuzzing framework). | ||||
| CVE-2026-64328 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix DMA fence leak In ffs_dmabuf_transfer(), a ffs_dma_fence object is kmalloc'd, with the underlying dma_fence later initialized by dma_fence_init(), which sets its kref counter to 1. Then, dma_resv_add_fence() gets a second reference, and a pointer to the ffs_dma_fence is passed as the usb_request's "context" field. The dma-resv mechanism will manage the second reference, but the first reference is never properly released; the ffs_dmabuf_cleanup() function decreases the reference count, but only to balance with the reference grab in ffs_dmabuf_signal_done(). The code will then slowly leak memory as more ffs_dma_fence objects are created without being ever freed. Address this issue by transferring ownership of the fence to the DMA reservation object, by calling dma_fence_put() right after dma_resv_add_fence(). The ffs_dma_fence then gets properly discarded after being signalled. | ||||
| CVE-2026-64335 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix broken rx after throttle If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port. | ||||