| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: fix use-after-free in roccat_report_event
roccat_report_event() iterates over the device->readers list without
holding the readers_lock. This allows a concurrent roccat_release() to
remove and free a reader while it's still being accessed, leading to a
use-after-free.
Protect the readers list traversal with the readers_lock mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_rndis: Protect RNDIS options with mutex
The class/subclass/protocol options are suspectible to race conditions
as they can be accessed concurrently through configfs.
Use existing mutex to protect these options. This issue was identified
during code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Add SRCU protection for reading PDPTRs in __get_sregs2()
Add SRCU read-side protection when reading PDPTR registers in
__get_sregs2().
Reading PDPTRs may trigger access to guest memory:
kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() ->
kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot()
kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(),
which uses srcu_dereference_check() and requires either kvm->srcu or
kvm->slots_lock to be held. Currently only vcpu->mutex is held,
triggering lockdep warning:
=============================
WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot
6.12.59+ #3 Not tainted
include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.5.1717/15100:
#0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824
__kvm_memslots include/linux/kvm_host.h:1062 [inline]
__kvm_memslots include/linux/kvm_host.h:1059 [inline]
kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline]
kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617
kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302
load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065
svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688
kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline]
__get_sregs2 arch/x86/kvm/x86.c:11784 [inline]
kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279
kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
counter: rz-mtu3-cnt: do not use struct rz_mtu3_channel's dev member
The counter driver can use HW channels 1 and 2, while the PWM driver can
use HW channels 0, 1, 2, 3, 4, 6, 7.
The dev member is assigned both by the counter driver and the PWM driver
for channels 1 and 2, to their own struct device instance, overwriting
the previous value.
The sub-drivers race to assign their own struct device pointer to the
same struct rz_mtu3_channel's dev member.
The dev member of struct rz_mtu3_channel is used by the counter
sub-driver for runtime PM.
Depending on the probe order of the counter and PWM sub-drivers, the
dev member may point to the wrong struct device instance, causing the
counter sub-driver to do runtime PM actions on the wrong device.
To fix this, use the parent pointer of the counter, which is assigned
during probe to the correct struct device, not the struct device pointer
inside the shared struct rz_mtu3_channel. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: core: Add locking around 'mfd_of_node_list'
Manipulating a list in the kernel isn't safe without some sort of
mutual exclusion. Add a mutex any time we access / modify
'mfd_of_node_list' to prevent possible crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) Protect regulator operations with mutex
The regulator operations pmbus_regulator_get_voltage(),
pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage()
access PMBus registers and shared data but were not protected by
the update_lock mutex. This could lead to race conditions.
However, adding mutex protection directly to these functions causes
a deadlock because pmbus_regulator_notify() (which calls
regulator_notifier_call_chain()) is often called with the mutex
already held (e.g., from pmbus_fault_handler()). If a regulator
callback then calls one of the now-protected voltage functions,
it will attempt to acquire the same mutex.
Rework pmbus_regulator_notify() to utilize a worker function to
send notifications outside of the mutex protection. Events are
stored as atomics in a per-page bitmask and processed by the worker.
Initialize the worker and its associated data during regulator
registration, and ensure it is cancelled on device removal using
devm_add_action_or_reset().
While at it, remove the unnecessary include of linux/of.h. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock
btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET
and Intel exception-info retrieval) without holding
hci_req_sync_lock(). This lets it race against
hci_dev_do_close() -> btintel_shutdown_combined(), which also runs
__hci_cmd_sync() under the same lock. When both paths manipulate
hdev->req_status/req_rsp concurrently, the close path may free the
response skb first, and the still-running hw_error path hits a
slab-use-after-free in kfree_skb().
Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it
is serialized with every other synchronous HCI command issuer.
Below is the data race report and the kasan report:
BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined
read of hdev->req_rsp at net/bluetooth/hci_sync.c:199
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254
hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030
write/free by task ioctl/22580:
btintel_shutdown_combined+0xd0/0x360
drivers/bluetooth/btintel.c:3648
hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246
hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526
BUG: KASAN: slab-use-after-free in
sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202
Read of size 4 at addr ffff888144a738dc
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Lock all vCPUs when synchronzing VMSAs for SNP launch finish
Lock all vCPUs when synchronizing and encrypting VMSAs for SNP guests, as
allowing userspace to manipulate and/or run a vCPU while its state is being
synchronized would at best corrupt vCPU state, and at worst crash the host
kernel.
Opportunistically assert that vcpu->mutex is held when synchronizing its
VMSA (the SEV-ES path already locks vCPUs). |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: serialize lock/unlock against other NAND operations
nand_lock() and nand_unlock() call into chip->ops.lock_area/unlock_area
without holding the NAND device lock. On controllers that implement
SET_FEATURES via multiple low-level PIO commands, these can race with
concurrent UBI/UBIFS background erase/write operations that hold the
device lock, resulting in cmd_pending conflicts on the NAND controller.
Add nand_get_device()/nand_release_device() around the lock/unlock
operations to serialize them against all other NAND controller access. |
| In the Linux kernel, the following vulnerability has been resolved:
blktrace: fix __this_cpu_read/write in preemptible context
tracing_record_cmdline() internally uses __this_cpu_read() and
__this_cpu_write() on the per-CPU variable trace_cmdline_save, and
trace_save_cmdline() explicitly asserts preemption is disabled via
lockdep_assert_preemption_disabled(). These operations are only safe
when preemption is off, as they were designed to be called from the
scheduler context (probe_wakeup_sched_switch() / probe_wakeup()).
__blk_add_trace() was calling tracing_record_cmdline(current) early in
the blk_tracer path, before ring buffer reservation, from process
context where preemption is fully enabled. This triggers the following
using blktests/blktrace/002:
blktrace/002 (blktrace ftrace corruption with sysfs trace) [failed]
runtime 0.367s ... 0.437s
something found in dmesg:
[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33
[ 81.239580] null_blk: disk nullb1 created
[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516
[ 81.362842] caller is tracing_record_cmdline+0x10/0x40
[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)
[ 81.362877] Tainted: [N]=TEST
[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 81.362881] Call Trace:
[ 81.362884] <TASK>
[ 81.362886] dump_stack_lvl+0x8d/0xb0
...
(See '/mnt/sda/blktests/results/nodev/blktrace/002.dmesg' for the entire message)
[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33
[ 81.239580] null_blk: disk nullb1 created
[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516
[ 81.362842] caller is tracing_record_cmdline+0x10/0x40
[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)
[ 81.362877] Tainted: [N]=TEST
[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 81.362881] Call Trace:
[ 81.362884] <TASK>
[ 81.362886] dump_stack_lvl+0x8d/0xb0
[ 81.362895] check_preemption_disabled+0xce/0xe0
[ 81.362902] tracing_record_cmdline+0x10/0x40
[ 81.362923] __blk_add_trace+0x307/0x5d0
[ 81.362934] ? lock_acquire+0xe0/0x300
[ 81.362940] ? iov_iter_extract_pages+0x101/0xa30
[ 81.362959] blk_add_trace_bio+0x106/0x1e0
[ 81.362968] submit_bio_noacct_nocheck+0x24b/0x3a0
[ 81.362979] ? lockdep_init_map_type+0x58/0x260
[ 81.362988] submit_bio_wait+0x56/0x90
[ 81.363009] __blkdev_direct_IO_simple+0x16c/0x250
[ 81.363026] ? __pfx_submit_bio_wait_endio+0x10/0x10
[ 81.363038] ? rcu_read_lock_any_held+0x73/0xa0
[ 81.363051] blkdev_read_iter+0xc1/0x140
[ 81.363059] vfs_read+0x20b/0x330
[ 81.363083] ksys_read+0x67/0xe0
[ 81.363090] do_syscall_64+0xbf/0xf00
[ 81.363102] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 81.363106] RIP: 0033:0x7f281906029d
[ 81.363111] Code: 31 c0 e9 c6 fe ff ff 50 48 8d 3d 66 63 0a 00 e8 59 ff 01 00 66 0f 1f 84 00 00 00 00 00 80 3d 41 33 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec
[ 81.363113] RSP: 002b:00007ffca127dd48 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 81.363120] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281906029d
[ 81.363122] RDX: 0000000000001000 RSI: 0000559f8bfae000 RDI: 0000000000000000
[ 81.363123] RBP: 0000000000001000 R08: 0000002863a10a81 R09: 00007f281915f000
[ 81.363124] R10: 00007f2818f77b60 R11: 0000000000000246 R12: 0000559f8bfae000
[ 81.363126] R13: 0000000000000000 R14: 0000000000000000 R15: 000000000000000a
[ 81.363142] </TASK>
The same BUG fires from blk_add_trace_plug(), blk_add_trace_unplug(),
and blk_add_trace_rq() paths as well.
The purpose of tracin
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
cxl: Fix race of nvdimm_bus object when creating nvdimm objects
Found issue during running of cxl-translate.sh unit test. Adding a 3s
sleep right before the test seems to make the issue reproduce fairly
consistently. The cxl_translate module has dependency on cxl_acpi and
causes orphaned nvdimm objects to reprobe after cxl_acpi is removed.
The nvdimm_bus object is registered by the cxl_nvb object when
cxl_acpi_probe() is called. With the nvdimm_bus object missing,
__nd_device_register() will trigger NULL pointer dereference when
accessing the dev->parent that points to &nvdimm_bus->dev.
[ 192.884510] BUG: kernel NULL pointer dereference, address: 000000000000006c
[ 192.895383] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20250812-19.fc42 08/12/2025
[ 192.897721] Workqueue: cxl_port cxl_bus_rescan_queue [cxl_core]
[ 192.899459] RIP: 0010:kobject_get+0xc/0x90
[ 192.924871] Call Trace:
[ 192.925959] <TASK>
[ 192.926976] ? pm_runtime_init+0xb9/0xe0
[ 192.929712] __nd_device_register.part.0+0x4d/0xc0 [libnvdimm]
[ 192.933314] __nvdimm_create+0x206/0x290 [libnvdimm]
[ 192.936662] cxl_nvdimm_probe+0x119/0x1d0 [cxl_pmem]
[ 192.940245] cxl_bus_probe+0x1a/0x60 [cxl_core]
[ 192.943349] really_probe+0xde/0x380
This patch also relies on the previous change where
devm_cxl_add_nvdimm_bridge() is called from drivers/cxl/pmem.c instead
of drivers/cxl/core.c to ensure the dependency of cxl_acpi on cxl_pmem.
1. Set probe_type of cxl_nvb to PROBE_FORCE_SYNCHRONOUS to ensure the
driver is probed synchronously when add_device() is called.
2. Add a check in __devm_cxl_add_nvdimm_bridge() to ensure that the
cxl_nvb driver is attached during cxl_acpi_probe().
3. Take the cxl_root uport_dev lock and the cxl_nvb->dev lock in
devm_cxl_add_nvdimm() before checking nvdimm_bus is valid.
4. Set cxl_nvdimm flag to CXL_NVD_F_INVALIDATED so cxl_nvdimm_probe()
will exit with -EBUSY.
The removal of cxl_nvdimm devices should prevent any orphaned devices
from probing once the nvdimm_bus is gone.
[ dj: Fixed 0-day reported kdoc issue. ]
[ dj: Fix cxl_nvb reference leak on error. Gregory (kreview-0811365) ] |
| Requires malware code to misuse the DDK kernel module IOCTL interface.
Such code can use the interface in an unsupported way that allows subversion of the GPU to perform writes to arbitrary physical memory pages.
The product utilises a shared resource in a concurrent manner but does not attempt to synchronise access to the resource. |
| jsPDF is a library to generate PDFs in JavaScript. Prior to 4.1.0, the addJS method in the jspdf Node.js build utilizes a shared module-scoped variable (text) to store JavaScript content. When used in a concurrent environment (e.g., a Node.js web server), this variable is shared across all requests. If multiple requests generate PDFs simultaneously, the JavaScript content intended for one user may be overwritten by a subsequent request before the document is generated. This results in Cross-User Data Leakage, where the PDF generated for User A contains the JavaScript payload (and any embedded sensitive data) intended for User B. Typically, this only affects server-side environments, although the same race conditions might occur if jsPDF runs client-side. The vulnerability has been fixed in jsPDF@4.1.0. |
| LibJS in Ladybird before f5a6704 mishandles the freeing of the vector that arguments_list references, leading to a use-after-free, and allowing remote attackers to execute arbitrary code via a crafted .js file. NOTE: the GitHub README says "Ladybird is in a pre-alpha state, and only suitable for use by developers." |
| The on-endpoint Microsoft vulnerable driver blocklist is not fully synchronized with the online Microsoft recommended driver block rules. Some entries present on the online list have been excluded from the on-endpoint blocklist longer than the expected periodic monthly Windows updates. It is possible to fully synchronize the driver blocklist using WDAC policies. NOTE: The vendor explains that Windows Update provides a smaller, compatibility-focused driver blocklist for general users, while the full XML list is available for advanced users and organizations to customize at the risk of usability issues. |
| A vulnerability exists in RTU IEC 61850 client and server functionality that could impact the availability if renegotiation of an open IEC61850 TLS connection takes place in specific timing situations, when IEC61850 communication is active.
Precondition is that IEC61850 as client or server are configured using TLS on RTU500 device. It affects the CMU the IEC61850 stack is configured on. |
| Missing synchronization in Windows Hyper-V allows an authorized attacker to deny service over an adjacent network. |
| Missing synchronization in Windows Hyper-V allows an authorized attacker to deny service over an adjacent network. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed
This avoids warning:
[ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
Caused by get_c0_compare_int on secondary CPU.
We also skipped saving IRQ number to struct clock_event_device *cd as
it's never used by clockevent core, as per comments it's only meant
for "non CPU local devices". |
