| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free by using call_rcu() for oplock_info
ksmbd currently frees oplock_info immediately using kfree(), even
though it is accessed under RCU read-side critical sections in places
like opinfo_get() and proc_show_files().
Since there is no RCU grace period delay between nullifying the pointer
and freeing the memory, a reader can still access oplock_info
structure after it has been freed. This can leads to a use-after-free
especially in opinfo_get() where atomic_inc_not_zero() is called on
already freed memory.
Fix this by switching to deferred freeing using call_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix crash when moving to switchdev mode
When moving to switchdev mode when the device doesn't support IPsec,
we try to clean up the IPsec resources anyway which causes the crash
below, fix that by correctly checking for IPsec support before trying
to clean up its resources.
[27642.515799] WARNING: arch/x86/mm/fault.c:1276 at
do_user_addr_fault+0x18a/0x680, CPU#4: devlink/6490
[27642.517159] Modules linked in: xt_conntrack xt_MASQUERADE
ip6table_nat ip6table_filter ip6_tables iptable_nat nf_nat xt_addrtype
rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_fwctl nfnetlink
zram zsmalloc mlx5_ib fuse rpcrdma rdma_ucm ib_uverbs ib_iser libiscsi
scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_core
ib_core
[27642.521358] CPU: 4 UID: 0 PID: 6490 Comm: devlink Not tainted
6.19.0-rc5_for_upstream_min_debug_2026_01_14_16_47 #1 NONE
[27642.522923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[27642.524528] RIP: 0010:do_user_addr_fault+0x18a/0x680
[27642.525362] Code: ff 0f 84 75 03 00 00 48 89 ee 4c 89 e7 e8 5e b9 22
00 49 89 c0 48 85 c0 0f 84 a8 02 00 00 f7 c3 60 80 00 00 74 22 31 c9 eb
ae <0f> 0b 48 83 c4 10 48 89 ea 48 89 de 4c 89 f7 5b 5d 41 5c 41 5d
41
[27642.528166] RSP: 0018:ffff88810770f6b8 EFLAGS: 00010046
[27642.529038] RAX: 0000000000000000 RBX: 0000000000000002 RCX:
ffff88810b980f00
[27642.530158] RDX: 00000000000000a0 RSI: 0000000000000002 RDI:
ffff88810770f728
[27642.531270] RBP: 00000000000000a0 R08: 0000000000000000 R09:
0000000000000000
[27642.532383] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff888103f3c4c0
[27642.533499] R13: 0000000000000000 R14: ffff88810770f728 R15:
0000000000000000
[27642.534614] FS: 00007f197c741740(0000) GS:ffff88856a94c000(0000)
knlGS:0000000000000000
[27642.535915] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[27642.536858] CR2: 00000000000000a0 CR3: 000000011334c003 CR4:
0000000000172eb0
[27642.537982] Call Trace:
[27642.538466] <TASK>
[27642.538907] exc_page_fault+0x76/0x140
[27642.539583] asm_exc_page_fault+0x22/0x30
[27642.540282] RIP: 0010:_raw_spin_lock_irqsave+0x10/0x30
[27642.541134] Code: 07 85 c0 75 11 ba ff 00 00 00 f0 0f b1 17 75 06 b8
01 00 00 00 c3 31 c0 c3 90 0f 1f 44 00 00 53 9c 5b fa 31 c0 ba 01 00 00
00 <f0> 0f b1 17 75 05 48 89 d8 5b c3 89 c6 e8 7e 02 00 00 48 89 d8
5b
[27642.543936] RSP: 0018:ffff88810770f7d8 EFLAGS: 00010046
[27642.544803] RAX: 0000000000000000 RBX: 0000000000000202 RCX:
ffff888113ad96d8
[27642.545916] RDX: 0000000000000001 RSI: ffff88810770f818 RDI:
00000000000000a0
[27642.547027] RBP: 0000000000000098 R08: 0000000000000400 R09:
ffff88810b980f00
[27642.548140] R10: 0000000000000001 R11: ffff888101845a80 R12:
00000000000000a8
[27642.549263] R13: ffffffffa02a9060 R14: 00000000000000a0 R15:
ffff8881130d8a40
[27642.550379] complete_all+0x20/0x90
[27642.551010] mlx5e_ipsec_disable_events+0xb6/0xf0 [mlx5_core]
[27642.552022] mlx5e_nic_disable+0x12d/0x220 [mlx5_core]
[27642.552929] mlx5e_detach_netdev+0x66/0xf0 [mlx5_core]
[27642.553822] mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core]
[27642.554821] mlx5e_vport_rep_load+0x419/0x590 [mlx5_core]
[27642.555757] ? xa_load+0x53/0x90
[27642.556361] __esw_offloads_load_rep+0x54/0x70 [mlx5_core]
[27642.557328] mlx5_esw_offloads_rep_load+0x45/0xd0 [mlx5_core]
[27642.558320] esw_offloads_enable+0xb4b/0xc90 [mlx5_core]
[27642.559247] mlx5_eswitch_enable_locked+0x34e/0x4f0 [mlx5_core]
[27642.560257] ? mlx5_rescan_drivers_locked+0x222/0x2d0 [mlx5_core]
[27642.561284] mlx5_devlink_eswitch_mode_set+0x5ac/0x9c0 [mlx5_core]
[27642.562334] ? devlink_rate_set_ops_supported+0x21/0x3a0
[27642.563220] devlink_nl_eswitch_set_doit+0x67/0xe0
[27642.564026] genl_family_rcv_msg_doit+0xe0/0x130
[27642.564816] genl_rcv_msg+0x183/0x290
[27642.565466] ? __devlink_nl_pre_doit.isra.0+0x160/0x160
[27642.566329] ? d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: correctly handle dm_bufio_client_create() failure
If either of the calls to dm_bufio_client_create() in verity_fec_ctr()
fails, then dm_bufio_client_destroy() is later called with an ERR_PTR()
argument. That causes a crash. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic: spifc-a4: Fix DMA mapping error handling
Fix three bugs in aml_sfc_dma_buffer_setup() error paths:
1. Unnecessary goto: When the first DMA mapping (sfc->daddr) fails,
nothing needs cleanup. Use direct return instead of goto.
2. Double-unmap bug: When info DMA mapping failed, the code would
unmap sfc->daddr inline, then fall through to out_map_data which
would unmap it again, causing a double-unmap.
3. Wrong unmap size: The out_map_info label used datalen instead of
infolen when unmapping sfc->iaddr, which could lead to incorrect
DMA sync behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
net: spacemit: Fix error handling in emac_tx_mem_map()
The DMA mappings were leaked on mapping error. Free them with the
existing emac_free_tx_buf() function. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Fix memory leak in xhci_disable_slot()
xhci_alloc_command() allocates a command structure and, when the
second argument is true, also allocates a completion structure.
Currently, the error handling path in xhci_disable_slot() only frees
the command structure using kfree(), causing the completion structure
to leak.
Use xhci_free_command() instead of kfree(). xhci_free_command() correctly
frees both the command structure and the associated completion structure.
Since the command structure is allocated with zero-initialization,
command->in_ctx is NULL and will not be erroneously freed by
xhci_free_command().
This bug was found using an experimental static analysis tool we are
developing. The tool is based on the LLVM framework and is specifically
designed to detect memory management issues. It is currently under
active development and not yet publicly available, but we plan to
open-source it after our research is published.
The bug was originally detected on v6.13-rc1 using our static analysis
tool, and we have verified that the issue persists in the latest mainline
kernel.
We performed build testing on x86_64 with allyesconfig using GCC=11.4.0.
Since triggering these error paths in xhci_disable_slot() requires specific
hardware conditions or abnormal state, we were unable to construct a test
case to reliably trigger these specific error paths at runtime. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/atmel-hlcdc: fix memory leak from the atomic_destroy_state callback
After several commits, the slab memory increases. Some drm_crtc_commit
objects are not freed. The atomic_destroy_state callback only put the
framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function
to put all the objects that are no longer needed.
It has been seen after hours of usage of a graphics application or using
kmemleak:
unreferenced object 0xc63a6580 (size 64):
comm "egt_basic", pid 171, jiffies 4294940784
hex dump (first 32 bytes):
40 50 34 c5 01 00 00 00 ff ff ff ff 8c 65 3a c6 @P4..........e:.
8c 65 3a c6 ff ff ff ff 98 65 3a c6 98 65 3a c6 .e:......e:..e:.
backtrace (crc c25aa925):
kmemleak_alloc+0x34/0x3c
__kmalloc_cache_noprof+0x150/0x1a4
drm_atomic_helper_setup_commit+0x1e8/0x7bc
drm_atomic_helper_commit+0x3c/0x15c
drm_atomic_commit+0xc0/0xf4
drm_atomic_helper_set_config+0x84/0xb8
drm_mode_setcrtc+0x32c/0x810
drm_ioctl+0x20c/0x488
sys_ioctl+0x14c/0xc20
ret_fast_syscall+0x0/0x54 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Fix incorrect free_irq() variable
The handler for the IRQ part of this driver is mpu3050->trig but,
in the teardown free_irq() is called with handler mpu3050.
Use correct IRQ handler when calling free_irq(). |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net()
When idtab allocation fails, net is not registered with rio_add_net() yet,
so kfree(net) is sufficient to release the memory. Set mport->net to NULL
to avoid dangling pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Fix double free in dma-buf feature
The error path through vfio_pci_core_feature_dma_buf() ignores its
own advice to only use dma_buf_put() after dma_buf_export(), instead
falling through the entire unwind chain. In the unlikely event that
we encounter file descriptor exhaustion, this can result in an
unbalanced refcount on the vfio device and double free of allocated
objects.
Avoid this by moving the "put" directly into the error path and return
the errno rather than entering the unwind chain. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_subset: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: ensure sb->s_fs_info is always cleaned up
When hfsplus was converted to the new mount api a bug was introduced by
changing the allocation pattern of sb->s_fs_info. If setup_bdev_super()
fails after a new superblock has been allocated by sget_fc(), but before
hfsplus_fill_super() takes ownership of the filesystem-specific s_fs_info
data it was leaked.
Fix this by freeing sb->s_fs_info in hfsplus_kill_super(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential kernel oops when probe fails
When probe of the sdio brcmfmac device fails for some reasons (i.e.
missing firmware), the sdiodev->bus is set to error instead of NULL, thus
the cleanup later in brcmf_sdio_remove() tries to free resources via
invalid bus pointer. This happens because sdiodev->bus is set 2 times:
first in brcmf_sdio_probe() and second time in brcmf_sdiod_probe(). Fix
this by chaning the brcmf_sdio_probe() function to return the error code
and set sdio->bus only there. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/kasan: fix double free for kasan pXds
kasan_free_pxd() assumes the page table is always struct page aligned.
But that's not always the case for all architectures. E.g. In case of
powerpc with 64K pagesize, PUD table (of size 4096) comes from slab cache
named pgtable-2^9. Hence instead of page_to_virt(pxd_page()) let's just
directly pass the start of the pxd table which is passed as the 1st
argument.
This fixes the below double free kasan issue seen with PMEM:
radix-mmu: Mapped 0x0000047d10000000-0x0000047f90000000 with 2.00 MiB pages
==================================================================
BUG: KASAN: double-free in kasan_remove_zero_shadow+0x9c4/0xa20
Free of addr c0000003c38e0000 by task ndctl/2164
CPU: 34 UID: 0 PID: 2164 Comm: ndctl Not tainted 6.19.0-rc1-00048-gea1013c15392 #157 VOLUNTARY
Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_012) hv:phyp pSeries
Call Trace:
dump_stack_lvl+0x88/0xc4 (unreliable)
print_report+0x214/0x63c
kasan_report_invalid_free+0xe4/0x110
check_slab_allocation+0x100/0x150
kmem_cache_free+0x128/0x6e0
kasan_remove_zero_shadow+0x9c4/0xa20
memunmap_pages+0x2b8/0x5c0
devm_action_release+0x54/0x70
release_nodes+0xc8/0x1a0
devres_release_all+0xe0/0x140
device_unbind_cleanup+0x30/0x120
device_release_driver_internal+0x3e4/0x450
unbind_store+0xfc/0x110
drv_attr_store+0x78/0xb0
sysfs_kf_write+0x114/0x140
kernfs_fop_write_iter+0x264/0x3f0
vfs_write+0x3bc/0x7d0
ksys_write+0xa4/0x190
system_call_exception+0x190/0x480
system_call_vectored_common+0x15c/0x2ec
---- interrupt: 3000 at 0x7fff93b3d3f4
NIP: 00007fff93b3d3f4 LR: 00007fff93b3d3f4 CTR: 0000000000000000
REGS: c0000003f1b07e80 TRAP: 3000 Not tainted (6.19.0-rc1-00048-gea1013c15392)
MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 48888208 XER: 00000000
<...>
NIP [00007fff93b3d3f4] 0x7fff93b3d3f4
LR [00007fff93b3d3f4] 0x7fff93b3d3f4
---- interrupt: 3000
The buggy address belongs to the object at c0000003c38e0000
which belongs to the cache pgtable-2^9 of size 4096
The buggy address is located 0 bytes inside of
4096-byte region [c0000003c38e0000, c0000003c38e1000)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x3c38c
head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
memcg:c0000003bfd63e01
flags: 0x63ffff800000040(head|node=6|zone=0|lastcpupid=0x7ffff)
page_type: f5(slab)
raw: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000
raw: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01
head: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000
head: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01
head: 063ffff800000002 c00c000000f0e301 00000000ffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004
page dumped because: kasan: bad access detected
[ 138.953636] [ T2164] Memory state around the buggy address:
[ 138.953643] [ T2164] c0000003c38dff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 138.953652] [ T2164] c0000003c38dff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 138.953661] [ T2164] >c0000003c38e0000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 138.953669] [ T2164] ^
[ 138.953675] [ T2164] c0000003c38e0080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 138.953684] [ T2164] c0000003c38e0100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 138.953692] [ T2164] ==================================================================
[ 138.953701] [ T2164] Disabling lock debugging due to kernel taint |
| In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: fix double free via VMA splitting
privcmd_vm_ops defines .close (privcmd_close), but neither .may_split
nor .open. When userspace does a partial munmap() on a privcmd mapping,
the kernel splits the VMA via __split_vma(). Since may_split is NULL,
the split is allowed. vm_area_dup() copies vm_private_data (a pages
array allocated in alloc_empty_pages()) into the new VMA without any
fixup, because there is no .open callback.
Both VMAs now point to the same pages array. When the unmapped portion
is closed, privcmd_close() calls:
- xen_unmap_domain_gfn_range()
- xen_free_unpopulated_pages()
- kvfree(pages)
The surviving VMA still holds the dangling pointer. When it is later
destroyed, the same sequence runs again, which leads to a double free.
Fix this issue by adding a .may_split callback denying the VMA split.
This is XSA-487 / CVE-2026-31787 |
| In the Linux kernel, the following vulnerability has been resolved:
net/tls: fix use-after-free in -EBUSY error path of tls_do_encryption
The -EBUSY handling in tls_do_encryption(), introduced by commit
859054147318 ("net: tls: handle backlogging of crypto requests"), has
a use-after-free due to double cleanup of encrypt_pending and the
scatterlist entry.
When crypto_aead_encrypt() returns -EBUSY, the request is enqueued to
the cryptd backlog and the async callback tls_encrypt_done() will be
invoked upon completion. That callback unconditionally restores the
scatterlist entry (sge->offset, sge->length) and decrements
ctx->encrypt_pending. However, if tls_encrypt_async_wait() returns an
error, the synchronous error path in tls_do_encryption() performs the
same cleanup again, double-decrementing encrypt_pending and
double-restoring the scatterlist.
The double-decrement corrupts the encrypt_pending sentinel (initialized
to 1), making tls_encrypt_async_wait() permanently skip the wait for
pending async callbacks. A subsequent sendmsg can then free the
tls_rec via bpf_exec_tx_verdict() while a cryptd callback is still
pending, resulting in a use-after-free when the callback fires on the
freed record.
Fix this by skipping the synchronous cleanup when the -EBUSY async
wait returns an error, since the callback has already handled
encrypt_pending and sge restoration. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: avoid memory leak in asus_report_fixup()
The asus_report_fixup() function was returning a newly allocated
kmemdup()-allocated buffer, but never freeing it. Switch to
devm_kzalloc() to ensure the memory is managed and freed automatically
when the device is removed.
The caller of report_fixup() does not take ownership of the returned
pointer, but it is permitted to return a pointer whose lifetime is at
least that of the input buffer.
Also fix a harmless out-of-bounds read by copying only the original
descriptor size. |
| Buffer Overflow Vulnerability in JP1/IT Desktop Management 2 - Manager on Windows, JP1/IT Desktop Management 2 - Operations Director on Windows, Job Management Partner 1/IT Desktop Management 2 - Manager on Windows, JP1/IT Desktop Management - Manager on Windows, Job Management Partner 1/IT Desktop Management - Manager on Windows, JP1/NETM/DM Manager on Windows, JP1/NETM/DM Client on Windows, Job Management Partner 1/Software Distribution Manager on Windows, Job Management Partner 1/Software Distribution Client on Windows.This issue affects JP1/IT Desktop Management 2 - Manager: from 13-50 before 13-50-02, from 13-11 before 13-11-04, from 13-10 before 13-10-07, from 13-01 before 13-01-07, from 13-00 before 13-00-05, from 12-60 before 12-60-12, from 10-50 through 12-50-11; JP1/IT Desktop Management 2 - Operations Director: from 13-50 before 13-50-02, from 13-11 before 13-11-04, from 13-10 before 13-10-07, from 13-01 before 13-01-07, from 13-00 before 13-00-05, from 12-60 before 12-60-12, from 10-50 through 12-50-11; Job Management Partner 1/IT Desktop Management 2 - Manager: from 10-50 through 10-50-11; JP1/IT Desktop Management - Manager: from 09-50 through 10-10-16; Job Management Partner 1/IT Desktop Management - Manager: from 09-50 through 10-10-16; JP1/NETM/DM Manager: from 09-00 through 10-20-02; JP1/NETM/DM Client: from 09-00 through 10-20-02; Job Management Partner 1/Software Distribution Manager: from 09-00 through 09-51-13; Job Management Partner 1/Software Distribution Client: from 09-00 through 09-51-13. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sma1307: fix double free of devm_kzalloc() memory
A previous change added NULL checks and cleanup for allocation
failures in sma1307_setting_loaded().
However, the cleanup for mode_set entries is wrong. Those entries are
allocated with devm_kzalloc(), so they are device-managed resources and
must not be freed with kfree(). Manually freeing them in the error path
can lead to a double free when devres later releases the same memory.
Drop the manual kfree() loop and let devres handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmsmac: Fix dma_free_coherent() size
dma_alloc_consistent() may change the size to align it. The new size is
saved in alloced.
Change the free size to match the allocation size. |
